Exporting FCP Video to Youtube Sub-Channel

I want to export my FCP project to my youtube main channel but it got uploaded to my gmail youtube account instead.
I already uploaded over 20 videos on my main youtube account through Final Cut Pro but this is the first time it happened where it got sent to my Gmail youtube channel.
To get a better illustration, I sent a screenshot link:
http://i752.photobucket.com/albums/xx166/tobywchu/Screen%20Shot%202015-02-02%20a t%205.00.53%20PM.png
As you can see, I have 143 subs on my main youtube account so you know why I do not want the video to be uploaded here on my gmail account with no subs or any content at all.
I also tried sending the project to compressor but I keep getting a quicktime error 2045. I also don't know what that is because this is also the first time I got the error. I had no problem compressing all my FCP projects in the past.
I was hoping if anyone can help me with this. Thank you!

I found out that exporting FCP to a different channel under the same gmail account was something you can adjust on youtube, apparently the problem wasn't on FCP to begin with.
However, for the failed compressor export, I haven't found a fix yet mainly because the forums have a different problem: plug-ins. Which I don't have.
The only additional detail I can give is that I deleted all my FCP events and projects back in Jan 1 to start fresh. I just recently added a brand new event folder so I'm not sure if that's the root of the problem. Did FCP reset something to trigger that quicktime error 2045 problem that keeps on occurring?

Similar Messages

I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

Hi MyAppleID99,
You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
http://support.apple.com/kb/ht2320
Regards,
- Brenden

Exporting camera videos to YouTube from iPhoto

So like all modern digital still cameras, mine takes HD video too. And iPhoto downloads both the videos and photos into my iPhoto albums. How can I export the videos directly to YouTube? Is there a YouTube uploader plug-in?
Having to use iMovie is a lot of extra steps.

No there is no YouTube plug-in.
Select the movie in the iPhoto Window and go File -> Export. Set to *Kind: Oriinal* and export the movie to the desktop. Upload to from there.
Regards
TD

I need help with exporting 720p video for youtube.

Hi everyone, I have been using Adobe premeir for almost a year now and I love it, as its very professional and powerful. I used to edit Standard with no problem, then export the full unconverted file (wmv) and run it though Windows Movie Maker to compress it (haha yeah I know its crazy.) Now that I got a camera capable of shooting HDV I want to use it. Im just wondering the following:
1.What format should I export with in Adobe Media Encoder? (Original Raw footage files from Camera are MOV formatted)
2.What should I set the Bitrate to?
3.How do I export to flash without it being to large of a file (Under 200mb's for a 5 minute video) and have it not choppy or pixelated?
4.How do I speed up exporting, how many passes should I do?
5.What overall is the best setup for youtube?
I also noticed a small glitch, and its when I export normally (full size, no compression) and run it though a compressor it cuts out all of the titles, and just flashes them for a milisecond. Its really odd. It only happens when I export in a certain format in which I cannot quite remember. Anyways.. thanks in advance for helping me. Its very appreciated.
NineLivesProductions

perform a search using the term export for web and it should throw up some ideas.
here's one for starters:
http://discussions.apple.com/thread.jspa?messageID=2309121&#2309121
If you're using flip4mac to convert to wmv, the trial stops at 30 seconds - you need at least wmvstudio to export to wmv:
http://www.flip4mac.com/wmv.htm

How to export a video with an alpha channel that can be switched off

Hi!
I'm stuck with something that I think might have a simple solution:
I need my video to have an alpha channel while still keeping all the RGB information in place too. This is for Syntheyes, which can take the alpha channel for a video and use it as a garbage matte while tracking.
The problem is that if I draw a mask around my video and then export as a PNG (with alpha), the RGB information seems to be gone even when I choose to ignore the alpha channel. I know how to edit the alpha channel in Photoshop while still keeping the RGB elements untouched, but how should I do that in AE?
Any help will be appreciated!

Okay I will answer my own question:
This worked as soon as I did a proper export as a PNG image sequence. I did my tests with only single frames by using the "save frame as file" -function, which did not work properly (the rbg information was gone).
So the simple solution to this question was:
Draw a mask on the video layer and export with alpha. The RGB will be there, even though the mask hides it in AE.

Why can't I export my video to youtube in HD from the trial version?

I am using final cut x trial version and all the video that I shot was in HD and when I go to export it to youtube it doesnt give me an option of 1080p I can only export in 540p. I need to have the video uploaded in high definition I am using it to apply for jobs. Can anyone help me?

What settings for exporting 1080p videos for Youtube recorded from FRAPS?

Hello,
I've tried a custom setting of mine which took an hour or so to render but came out blurry:
Video:
H264
1920 x 1080
Bitrate: 15
VBR, 1 PASS
29.97 FPS
PAL
And audio is just on default with 160 bitrate.
The quality from FRAPS is perfect but as said before when inported in Premiere and then rendered its outputted blurry and jumpy.
Any ideas?
Thanks.
EDIT: Just for reference I followed this tutorial: http://www.youtube.com/watch?v=FL9JULY8IkU

Output file info:
General
Complete name                            : C:\Users\Charlie\Documents\Adobe\Premiere Pro\5.5\TF2.mp4
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 1.91 GiB
Duration                                 : 15mn 3s
Overall bit rate mode                    : Variable
Overall bit rate                         : 18.2 Mbps
Encoded date                             : UTC 2012-08-31 01:10:24
Tagged date                              : UTC 2012-08-31 01:10:24
©TIM                                     : 00:00:00:00
©TSC                                     : 50
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 15mn 3s
Bit rate                                 : 18.0 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 50.000 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.173
Stream size                              : 1.89 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2012-08-31 01:10:24
Tagged date                              : UTC 2012-08-31 01:10:24
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 15mn 3s
Source duration                          : 15mn 4s
Bit rate mode                            : Variable
Bit rate                                 : 192 Kbps
Maximum bit rate                         : 292 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Compression mode                         : Lossy
Stream size                              : 20.4 MiB (1%)
Source stream size                       : 20.4 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2012-08-31 01:10:24
Tagged date                              : UTC 2012-08-31 01:10:24
Part of the source file info(FRAPS makes serveral files):
General
Complete name                            : E:\Fraps Vids\TF2MvM\hl2 2012-08-26 16-14-55-35.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
File size                                : 3.95 GiB
Duration                                 : 1mn 53s
Overall bit rate                         : 298 Mbps
Video
ID                                       : 0
Format                                   : Fraps
Codec ID                                 : FPS1
Duration                                 : 1mn 53s
Bit rate                                 : 280 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 50.000 fps
Color space                              : YUV
Bit depth                                : 8 bits
Bits/(Pixel*Frame)                       : 2.698
Stream size                              : 3.71 GiB (94%)
Audio
ID                                       : 1
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, Sign                    : Signed
Codec ID                                 : 00001000-0000-0100-8000-00AA00389B71
Duration                                 : 1mn 53s
Bit rate mode                            : Constant
Bit rate                                 : 18.4 Mbps
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Back: L R, LFE
Sampling rate                            : 192 KHz
Bit depth                                : 16 bits
Stream size                              : 250 MiB (6%)
Interleave, duration                     : 999 ms (49.94 video frames)
Sequence settings:
General
Editing mode: AVCHD 1080p square pixel
Timebase: 29.97fps
Video Settings
Frame size: 1920h 1080v (1.0000)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 3
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Thanks for your help.

Problem with video playback, youtube, news channels etc

I've taken a good look around and can't find any answers to this, so here goes.
I use my iMac in W7 a lot as it suits me for work, however, when I view news videos (at www.bbc.co.uk for example) or on YouTube the screen and whole computer freezes, normally at the end of playback, but occasionally during the video. I give it 10, 20, 30 seconds and usually it rights itself. I have the latest video drivers, and the latest graphics drivers installed. This doesn't happen in OSX. Anyone else had this? Anyone got a solution?

Oh gosh, now I am worried.
Windows 7,
Control Panel,
Device Manager,
Display Adapters,
'NVIDEA GeForce 9400'
That's what it says.
Under Sound, Video and Game Controllers,
'Cirrus Logic CS4206A (AB 78)'
I've never changed, adjusted or touched these, I just use the machine.
I just checked the specifications, http://en.wikipedia.org/wiki/IMac%28Intel-based%29#AluminumiMac and it is NVIDEA unless I am looking at the wrong thing
Message was edited by: oldshirts

How Do I Export a Video Project With 4-Channel Discreet Audio?

Is there a way to output 4-channel discreet audio (for playback to a broadcast video deck)? We want output channels 1&2 to be stereo and channels 3&4 to be mono. But I can only seem to get it to mix down to 2-channel stereo.
Anybody???
thanks
Tim Walton

Resolved on another post

Export videos to YouTube but audio isn't there after exporting

I exported my video to YouTube via Quicktime but audio isn't there after I go to the YouTube link. I turned up my volume all the way but no sound comes out. I JUST upgraded to Mac OS X 10.6.8 TODAY ON JUNE 23RD! Has anyone else experienced this AFTER upgrading to 10.6.8? With 10.6.7 I could export videos perfectly. AND AFTER upgrading to 10.6.8, it takes FOREVER for the video to export to YouTube. It takes hours!

OK so I tried a few more videos. The first had the problem but the several more I tried a few more and they worked fine. Then I went back to the first and it started working fine again. So the problem seems to have gone away.

I am trying to export a video I have made in FCP 10.0.8 to Youtube or to a master file and I keep on getting an error -50, or "error exporting master file at frame 20074" Any ideas?

Having used FCExpress for a while I decided to give FC Pro X a trial, I created my first video with it, exported to youtube and it worked fine. I am now trying to export my second video to youtube and I get an error -50 which means absolutely nothing. Not being defeated that easy I tried exporting to a mster file using the H.264 codec and I get an error "exporting master file at frame 20074" - again another useless error. It takes at least 10 minutes to get to this error after the rendering has started, it gets about 12% in. Any ideas where to start - I am seriously at the point of giving up with Final Cut Pro X simply on the basis of it being more trouble than its worth - I am just glad I did not pay for it yet...
Any help would be much appreciated.
Gerry

Hi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry

HELP!!! I did everything i could all day to fix this and i can't upload my video to youtube or export file because it keeps saying "sharing requires more memory to be available" How do i enable my movie to be uploaded or exported?

Question 1 / Plan A : When i finished making my movie project in iMovie 11 on Mac, i tried sharing it at all ways such as youtube, export, etc... it kept popping up: "sharing requires more memory to be available". I searched up all day on the internet on how to figure this out, i followed all of their advices but nothing seems to happen. btw i already got permitted for longer than 15 mins video on youtube. it's also weird that my computer has more than 600GB free space. So how do i upload my 2 hour video to youtube? and how do i avoid the popup of "sharing requires more memory to be available"?
Question 2 / Plan B: If plan A won't work out, i definitely don't wanna do this all over again because i took centuries and effort on this. What im trying to do is divide them to multiple projects, and maybe it will let me upload it because of it's file size? So how do i copy parts from a project and paste it to another project or event library so it would be easier for me to finish it in iMovie?
Question 3 / Plan C: If plan B won't work out, how do you screen record my movie with audio? What im trying to do is to record it by screen using quicktime and divide them by parts. I know how quicktime and soundflower works, but when i tried it, but the problem is that soundflower and quicktime audio was very crappy and broken at some point. So how do i record good quality audio with screen recording?
Question 4 / Plan D: If plan C won't work out, i guess the worst way to do this is to record from my phone, its such a bitter idea but i want this to be published in good quality. i am so tired and i took so weeks finishing this project and the ending results just ****** me off. Id be glad if someone has an idea on this problem im occurring. Hope y'all people and mac experts understood on what im struggling about. leave a reply on those of you who might have an idea on solving this problem!

When You select share, are you able to get either of these two windows?
First one is Export As
Second one is Save as QuickTime
I looked at earlier post and see You have 4GB RAM, maybe try a smaller format to convert it to,
then save it to file first before trying YouTube.

How do i export a video made in imovie to youtube in the best quality possible?

how do i export a video made in imovie to youtube in the best quality possible?

You can only export in the same resolution that you imported.
That is if you shot in 720p you cannot export in 1080p.
Share > YouTube and select the highest resolution available.
Z.

Export option for highest quality posting to Google video and YouTube

I'm trying to figure out what the best export options are for posting video on Google Video and YouTube. My primary interest is skiing video with quick actions. Here are the 5 options I tried on my iMovie HD 6, the latest and the greatest:
MPEG4, LAN
http://video.google.com/videoplay?docid=2913246368993273712
http://www.youtube.com/watch?v=xL6RHKXydhQ
MPEG4, LAN, High Quality
http://video.google.com/videoplay?docid=1920438333553484589
http://www.youtube.com/watch?v=W0myAYyBx0k
Quicktime, LAN, 320x240, Deinterlace
http://video.google.com/videoplay?docid=-2101048758986639008
http://www.youtube.com/watch?v=rExhbmBksVs
Quicktime, LAN
http://video.google.com/videoplay?docid=8289794703671829891
http://www.youtube.com/watch?v=q-nwmyJ-y_g
Quicktime, LAN, Deinterlace
http://video.google.com/videoplay?docid=-1116022416411494165
http://www.youtube.com/watch?v=H4Wch75hTzs
You can get the whole list on each site with following URL
http://video.google.com/videosearch?q=imovie-quality-comparison
http://www.youtube.com/my_playlists?p=C0D08A3D961234E4
Each video has cross reference URL in the description which link to the same video posted on other site.
Currently my choice is "Quicktime, LAN, Deinterlace" on Google Video. Only thing I don't like is doubling of image for fast moving part, which somehow disappears if I reduce the size to 320x200, but then it is too blurry when displayed in full screen.
None is usable on YouTube. They look horrible, but there are much better quality videos on YouTube.
Since there are so many knobs to play around on each option, I'm at loss what to play around with. I did quick things like increasing the size to 720x480 or increasing the frame rate, but surprisingly, none seems to make any difference when filtered through their encoder.
I like to solicit suggestions on what option to try. I'll export the same video with that options, upload it to both sites and we can take a look.
eMac & iBook Mac OS X (10.3.9)

Hi — I also found you via Slashdot. You've gone to a good amount of effort to solve this scientifically.
I'm just here to say: Face it, you need to go past the built-in options. Here's what you need to know:
1. YouTube is 320x240 (or 320 by anything lower, for widescreen). You must scale to that.
2. YouTube is 30fps maximum, so if you already have that, set that. If you have 25 or 24, use that. If you have 50, it looks better with 25 (I've tried).
3. The interlacing choice is purely up to your original video. Does it have 480 lines or 576 lines? And if so, does it have fluid "live camera" motion, unlike film? If your answer is yes to both, then you have interlacing. Since YouTube doesn't do interlacing, you need to remove it.
4. Both YouTube and Google Video have a problem with the (seemingly open, standard) MP4 format. We think it's because of the VLC software they used. Anyway, use a QuickTime MOV file for the wrapping container, so export to QuickTime Movie (not MPEG-4). But use the H.264 codec. It's good.
OK, that's it. It's your pretty complete, simple guide to making good YouTube videos.
Don't forget to use a tripod and external microphones, and lay off using the zoom too much. That's my other advice, for earlier in the process. Now you've learnt everything technical The rest is only down to viral marketing and you can learn all that by example out on YouTube.
CK.

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Exporting FCP Video to Youtube Sub-Channel

Similar Messages

Maybe you are looking for