Exporting file to be under 15 mbs

Hi there. I have a project that is 7m27s long. It is DVCPRO HD 720p60. 960x720. It is 2.67 gbs when exported in full res. I want to be able to make an emailable version of it. I've tried to export in compressor as the lowest quality iphone device setting, but it is still 37 mbs large. I tried compressing it but that didn't work either only gained about .3 mbs. Does anybody know if there is a way to get it below 15 mbs? Thanks!

Psiforce7,
Please forgive me if I say this but the idea of attempting to shrink the work done to an unwatchable clip in order to "email" it is totally unnecessary and kind of old fashion.
There are so many ways to deliver the product without compromising it too much!
|
- Compress it to 100 MB or less and you can send your file with http://www.yousendit.com/ or many other similar sites for free.
|
- Use and share an FTP account.
|
- Use your domain space to upload your file an send the client a link.
My point is:
do not compromise too much the video quality and use the best compression codec (H.264 that is) to keep file small and quality as high as possible. One of the most important factors that affects file size is bit rate.
If your 37MB compressed file is looking good then stick with that and follow one of my above mentioned methods to send a link rather than a fat attachment.

Similar Messages

Lightroom 5 cannot export files in original Raw format (LR 5.4, Mac, OS 10.9.4).

A client has the following problem: When trying to export files in the original Raw format (.CR2), the operation failed and a dialog informs us that "Some export operations were not performed". We can export JPEGs just fine.
After lots of testing, this is what we discovered: The problem does not appear to be catalog-based; we run into the same problem using a test catalog. The export operation works fine, however, with the same test catalog and images on two other machines, and it even works fine on the same machine with a new user admin account that we created.
So it appears to be something associated with the user account, , or with how LR is interacting with the user account, but I cannot figure out what it might be. We can copy the Raw files when using the Finder to do so. But not via Lightroom. Any thoughts, ideas of suggestion would be greatly appreciated! Thanks, Sean

As part of your testing make sure you've tried exporting JPGs from the same folder as the CR2s you're exporting as original, and export JPGs from CR2s to the same folder as you're exporting your originals. This would test LR's read and write permissions from and to the folders being used.
From this document you can see that all the LR files other than the program, are under the /Users folder with different values possible for each user, so the difference could be that the users that work are using the original LR defaults, if you have just started using LR with them after you started having this problem, or at least that the user with the problem has some oddball settings that are interfering with Export as Original.
Preference and other file locations in Lightroom 5
You can test for the Preferences being off by either copying the preferences from a user that has the problem to a user that doesn't have the problem--probably through an external or common folder, or be deleting the preferences file from the user that has the problem and see if it resolves. Moving the preferences file or renaming it may be better than deleting it if no change is seen, then you can restore the preferences back by moving or renaming the file back to the original location and name.

Export all tables' name under user by informatica

Hi,
I have a requirement about informatica mapping,
we want to user one mapping to export all tables' name under user,
like sql :
SELECT t.OWNER || '.' || t.TABLE_NAME ||
FROM all_tables t
WHERE t.OWNER = 'BIEBS';
How to realize it?
Thank you!

Get the table all_table in source analyzer save it. While building the map choose this as ur source, modify source qualifier as select table_name,table_name from all_tables where table_name='BIEBS'.
Once u have this, use an expression transformation to build ur expression and load it into a flat file.
Please mark this answered or helpful if it solves your purpose.
Rgds.

ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file

Hi,
I'm having a serious issue with your brend new Cisco Prime Network Control System (NCS) and i would appreciate if someone could give me good answers.
After a background backup task failure, the database was entirelly corrupted and the oracle server no longuer wanted to start. And because of that the NCS web server is unusable, since no one can log in.
We tryed to restore to last known backup obtained after a former suucessful backup. But we get this error:
"ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file"
All the lost data was previously migrated from the former WCS 7.x server. Before this issue everything was working fine.
So we think that the appliance is seeing the backup file from NCS as a WCS backup.
We need to find rapidly a solution. Here is our configuration:
We formerly had WCS 7.0.172.0 hosted on Microsoft Windows Server 2003 SP2 with the above caracteristics:
Intel(R)Xeon(R) CPU 5120 @ 1.86Ghz 1.87Ghz 16GB of RAM.
We now have NCS Version 1.1.1.24 running under Cisco Application Deployment Engine
OS Release: 2.0
ADE-OS Build Version: 2.0.1.038
ADE-OS System Architecture: x86_64

I was getting this error too. TL;DR: When you transfer the wcs.zip file to your FTP server, make sure you are using BINARY mode... which is often NOT the default FTP mode.
Long Version:
TO GET THIS ERROR, what I had done was use the Windows CLI FTP command to transfer my "wcs.zip" to the NCS FTP server.
-----BEGIN WRONG STEPS-----
C:\ftp
ftp> open x.x.x.x
Connected to x.x.x.x.
220 Service ready for new user
User (x.x.x.x:(none)): ftp-user
331 User name okay, need password for ftp-user
Password:
230 User logged in, proceed
ftp> put wcs.zip
200 Command PORT okay
150 File status okay; about to open data connection
226 Closing data connection
ftp: 526768949 bytes sent blah blah etc
-----END WRONG STEPS-----
I would then run "ncs stop" and "ncs migrate" and get the "ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file".
I remembered something from my misspent youth: Windows, for no good reason, likes to transfer files in ASCII mode. UNIX (which LINUX comes from) prefers BINARY, and the two do not like to negotiate.
TO FIX THIS, I had to just FTP in Binary mode.
-----BEGIN RIGHT STEPS-----
C:\ftp
ftp> open x.x.x.x
Connected to x.x.x.x.
220 Service ready for new user
User (x.x.x.x:(none)): ftp-user
331 User name okay, need password for ftp-user
Password:
230 User logged in, proceed
ftp> binary
200 Command TYPE okay
ftp> put wcs.zip
200 Command PORT okay
150 File status okay; about to open data connection
226 Closing data connection
ftp: 526768949 bytes sent blah blah etc
-----END RIGHT STEPS-----
NOW when I enter "ncs stop" (actually... had to restart them... then stop them... x.x) and then the proper "ncs migrate" commands, I get a happy output and don't have to go home late troubleshooting this.
" Stage 1 of 5: Decompressing backup ...
-- complete.
Stage 2 of 5: Restoring Support Files ...
              : Restoring the Domain Maps ...
              : -- complete.
              : Restoring the License files ...
              : -- complete.
-- complete.
Stage 3 of 5: Restoring Data ...
I hope this helps anyone banging their head against the WCS->PI1.3 install wall.
(Note, WCS needs to be migrated to NCS 1.1.1.24 (NOT NCS 1.1.3!!!!!) before you can migrate to Prime Infrastructure 1.2 or 1.3, because for no readily apparent reason the "ncs migrate" command was removed from PI 1.2 and up. Also note, there is no "Prime Infrastructure 1.1;" they just renamed NCS to Prime Infrastructure after NCS 1.1 because. Yes, the sentence ends there. Great products, all 3, just... agonizing to migrate.)

FCP changes exported file name

Just checking to see if this is a small bug/quirk in the software. I export UC QT movies constantly from FCP. Occasionally, it will cut off the last letter of a file name I set and append some gibberish, like #6DB5 or something. I delete render files, rerender, and same thing. Sometimes I batch export, and only one file in the batch will get this problem. Just a bug?

This is when you have FCP limited to a certain size of file on export (often 2000 MB). I believe this was designed to cope with MSDOS limitations of 2gig per file on their file system, so the original QT would link to several under 2 gig size files. Change or remove your limit - it's under System Settings - remove the tick from Limit Capture/Export File Segment Size...
post back,
Patrick

Random Green Frames in Premiere Render and Export Files

Hello!
I just switched a new MacBook Pro and am having a render issue in Premiere CC. Random green frames pop up sporadically throughout my video. This happens both on my rendered timeline and in the exported file. It seems to affect the clips with heavier color correction. What is happening and how can fix it?
Here's a link to the video on Vimeo. You will see green frames at 00:04, 00:43, 01:03, 01:39, 01:48, 01:58 and 02:25.
I'm editing on Premiere CC. Most of the clips have heavy effects work (motion, fast color corrector, RGB curves and a circle overlay for vignetting). All footage and project files are stored on a WD My Passport 2TB Portable External USB 3.0.
The footage is from a 5D Mark III set for 1080p IPB, so files are .movs.
Exporting in H.264 with the Vimeo HD 1080p 23.976 preset, not changing any of the preset settings. But again, the issue also occurs pre-export, after rendering on the timeline.
MacBook Pro
Retina, 15-inch, Mid 2014
Processor: 16 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GT 750M 2048
Software: OS X 10.9.4 (13E28)
Please help! Thank you!
Stephen

Problem fixed!
Someone from the Adobe support team instructed me to change the renderer to software only mode. This can be changed under File>Project Settings>General. More specifically, I changed it from Mercury Playback Engine GPU Acceleration (Open CL) to Mercury Playback Engine Software Only. I deleted the old render files and reexported without any further issues.
Success!

7.2.2 Update Export File TC Changes

Updated a bunch of our edit suites to 7.2.2. Loaded our normal Export Presets to AME and PPro. Every time an editor exports a file longer than 30seconds, the TC flips from drop frame to non-drop. As these are broadcast files for air, reporting your exact export file times is critical for master control playback. This did not happen under the last release, so it must be something that has changed in the 7.2.2 update. The imported file now reports a TC change of 3 seconds less than the actual Seq TRT. This is happening on multiple edit suites all using 7.2.2
Attaching a picture showing the sequence time and the re-imported file with different TRT.
Also attaching a second picture showing the file run through Video Spec. The TRT looks right in Video Spec to match the Sequence time, but the file still shows seconds off and change of Drop / Non Drop when imported back into Premiere to check the export.
Anyone else see this issue since updating PPro CC to 7.2.2
Andy Edwards

Custom MPEG2 Preset used for the past 2 years to export files.
NTSC, 1920X1080, 29.97fps, Upper, Quality 100 CBR, Target 50.00 Mbps, Closed GOP Every 1,
MPEG Audio, 384kbps, 48 kHz, Stereo, 16bit

Why are .xlsm file not listed under spreadsheet in finder?

In finder (os10.8.2) the .xlsm files are listed under documents not spreadsheets. Is there a way to get all spreadsheet listed properly?
Len

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Export File to Microsoft Word Doc fails - why?

I have Acrobat 11 Pro installed, and for the fist time tried to "Export File to Microsoft Word Document". After invoking this, I see the "Preprocessing file for export" progress bar appear in the lower right corner of the document window, but then I receive an error dialog box that says "Save As failed to process this document. No file was created." Is there an additional license required to use this feature, or is there some additional configuration needed, or do I have a problem with my install? Thanks in advance.

Hi bk81223519,
Have you tried converting some other PDF to word and then checked.
Are you running the latest patch of Acrobat XI i.e. 11.0.10?
Please choose 'Check for Updates' option under the Help menu.
You might try choosing 'Repair Acrobat Installation' from Acrobat Help menu and check.
Let me know.
Regards,
Anubha

Export File As MIDI - Tempo anomally

I score movies and write virtually everything in Logic using the various software instruments that come with the program, plus some others. But when I record in a studio I work in ProTools. In order to set up the sessions in ProTools I select Export File As MIDI and import the MIDI file into my ProTools session. This creates a bar and beat and a tempo structure that is the same as my Logic session with one strange anomally. This function creates a MIDI file whose tempo is 1/10,000th or 2/10,000 fater than the original. That is, if the original session were at 120 bpm the session created with the MIDI file will be at 120.0001. At first I thought this was a ProTools issue but the same thing occurs when I click on the file to open a Logic session.
I am not terribly concerned with the variance, as it would take 10,000 minutes (just under 7 days) for the sessions to be one beat off. But I am still confused as to why this would happen at all.
Anyone have an answer?

So you're saying that a Logic session made at 120.0000 BPM, saved as a .mid file, and then re-opened in Logic will have a .0001 BPM tempo variation? Wow, weird-ee-ooooo!
As a test I did the following:
1. Created a sequence in Logic @ 120.0000 BPM
2. Exported it as a .mid file. Closed the Logic song.
3. dbl-clicked on the .mid file and Logic opened it, tempo = 120.0000
So... a few questions:
a) What version of Logic are you running?
b) Do you work at any particular frame rate? If so, what is it?
c) Can you confirm that the frame rate of your Logic sessions match that of your PT sessions?
Might be grasping at straws...

Export file disappears after exporting

Export file disappears after exporting
Tried dataexport(calc script), report script,need du=ynamic calc members too..
its urgent now....please help
But I have lots and lots of dynamic calc members...its huge...will take hours together to change...so I planned to make stored for only those members which are required in export file...but now...It seems that default calc is not getting executed... may be that happened because I changed few member properties...
Any thoguths why now dynamic calc is not working?
Thanks a lot for any help..its really urgent now...

Regardless of which limited export process you are using (dataexport calc script, report script, or MaxL/Esscmd export) I can't imagine the export file disappearing if it in fact gets written out at all.
As rinku wrote, if it's a true Esssbase export it's either in the app folder or where ever you wrote it with MaxL/Esscmd.
There are known issues with dynamic calc and dataexport. I've seen this myself and ultimately gave up on exporting the dynamic members. Yes, your changes could cause your exising aggregation scripts to give different results.
How about this:
1) Reduce scope of export process and remove dynamically calculated Accounts/Periods (a guess on my part, but likely right)
2) Export to known location (app folder under Essbase folder or some server-addressable folder). Btw, how are you doing the export? It wasn't clear from your post, but I guess it doesn't really matter.
3) See if that works, and if so, expand until failure. That will tell you what is and isn't going to work.
Regards,
Cameron Lackpour

[BUG] Reports vanishes and Export File cant be imported

Hi,
I do not know where to report a Bug for the SQL Developer, so i will do it here. (May be you should consider of creating such a WebPage as Part of the SQlDeveloper excange).
Description of the Bug:
I experienced already twice a loss of all my UserDefinded Reports in the SQLDeveloper. I start the SQLDeveloper and all my Reoprts are gone - no idea why. So because this already happend to me, I alwyays Exported my reports into a File. As ist ahppend again, i tryied to import my Reports into the SQLDeveloper, But when I click on "Import" In the Context Menu a FileDialog with the Title "Save" does open up. I then can choose my Import File and confirm it but it does not get imported, neigther does the export File get changes or so ...
I do not have any Idea what happend there, but I miss my reports very much!!!!!
regards
Joachim

Hi Joachim,
I'll address the logistics question first. Where to log bugs:
For the production software, you can log bugs through Metalink, if you have a Database Suppport License. This is the reason we do have a section on the Exchange for logging bugs. For any evaluation software releases we do, you can log bugs here on the forum.
If you are working between the evaluation release and the production release, your reports will disappear in the Production release. (See the 'before you install' in the Getting Started doc on our homepage). It sounds like the UserReports.xml file in the .sqldeveloper folder is being corrupted.
There is one thing I do to save reports I want to keep. I export the reports and save that file to another directory. Then go into Tools -> Preferences - Database -> User Defined Extensions. Now Add a row. Click in the "Type" field and select "Report" . Click in the Location field and browse for your file. (This is only available in 1.1 - you can do it in 1.1.0.21.97)
You need to click away from this filed to pick up that change. Then click OK. If you restart SQL Developer, you'll see a new folder called "Shared Reports". In the current evaluation release 1.1.0.21.97, only the Shared Reports folder is added, you still need to import the reports xml file. In subsequent builds and in the next build you'll have access to, the file of reports is open under this Shared Reports folder. These reports are not editable, but they are safe.
So you have a method for keeping your reports safe.
Regards
Sue

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

What does the open file dialog do 'under the hood' and is there a way to simulate it

What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
Dave

Hi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David

HOW TO REMOVE HYPHEN IN LAYER COMP EXPORT FILE

HOW TO REMOVE HYPHEN IN LAYER COMP EXPORT FILE IN PNG FORMAT...

I ususally do that type of thing with a state machine... read a token, look for what is next, and if it's the closing token, I don't write it out. You have well defined opening token syntax and closing token syntax, so it should be relatively easy.

Exporting file to be under 15 mbs

Similar Messages

Maybe you are looking for