Exporting files always named Page 1?

Hi there, I'm a new user to Fireworks and I find whenever I'm exporting a slice as a gif, jpeg etc no matter what I name the file it always exports it named 'Page 1'. Any ideas?
Thanks muchly!

Sorry last picture, this is the last picture. The file stopped exporting at about 4.3 GB, Final Cut stating that it does not support audio files bigger than 4 GB.
I'm assuming my problem is just a small abnormality, and there were many ways to work around it. I was just hoping I could figure out why! But thanks for your help in any case!

Similar Messages

  • When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

    If anyone can help me with this I would be seriously grateful.
    When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
    I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
    This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
    I've used Aperture in the past under previous versions and not had this problem.
    Any help would be great.
    Thanks.
    Bob.

    Hi Jack,
    Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
    It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
    I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
    Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
    Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

  • Canon FS 100 - Exported files don't meet expectations

    Hi,
    I am working with a Canon FS100 which saves files as MOD files. I import those files via iMovie 08. The files look good in iMovie... and when I send them to Final Cut via a XML file, they look good. Its when they leave Final Cut that they start looking bad.
    No matter how I export, quicktime file or Quicktime Conversion, my exported file always ends up being blocky and a bit pixilized... aka if I film a solid black, you will be able to see square areas of differences in the black color. Its not smooth like it is in the time line, on the camera, or when I export footage of the same item that I shot at the same time on a MiniDV camera. I also tend to get a bit of interlacing as well.
    I have tried a few codecs in the options menu, but to no avail. Does anyone have a suggestion on the codec to use, or if I should take different steps?
    Thanks.

    Try using MPEG Streamclip to transcode those files to DV if standard def, or HDV native or ProRes... ProRes is likely the same look as Native HDV, however it renders a lot faster at the cost of a lot more disk space... but importing into iMovie results in the AIC codec I think, so that is going to cost you the picture quality you're after...
    Jerry

  • Aspect Ratio Sort and Export (File Naming)

    When I crop my photos, I sometimes find that some photos work best in the 4x5/8x10 crop and others in a 2x3/4x6 aspect ratio.
    Issue #1) How can I sort and find all of my images with a specific aspect ratio?
    When in the Library module and setting up a filter (ctrl+f), I don't see any way to filter and sort out my aspect ratio. In the "Metadata - Label" filter fields, there is an "Aspect Ratio" value however the only options are Portrait and Landscape. (more of a photo/page layout than 'aspect ratio' to me)
    ** Feature Request: Please add "Aspect Ratio" options (just as presented with "r" is pressed for resize) in the Library Filter Metadata. **
    Issue #2) How can I include the aspect ratio of the image (e.g. 4x5) in the exported file name?
    I don't see any way to to do this either, so I have to manually find all of the images with the same aspect ratio first, then set a Custom Name field for export and export each ratio at a time.
    ** Feature Request: Please add "Aspect Ratio" options to the file naming fields available for selection when exporting images.  Values like "4x5" and "4x6" would be great to be able to include in the filename of my images.
    Regards,
    Brian

    Thank you John!  I've found and posted them here:
    http://feedback.photoshop.com/photoshop_family/topics/sorting_by_aspect_ratio
    http://feedback.photoshop.com/photoshop_family/topics/need_aspect_ratio_field_for_filename _export

  • Export to Text file does not page

    Since I applied SP 7 for Crystal 9, when I export a report to a text file it does not page and print the report header on each page. It prints the report header once and one lone continuous page of information. My report was export to text with a page header on each page before I applied the service pack. How do I get it to page in the text export and print the page header on each page?

    In 8.5 the default behavior of the export to text was to not paginate. With 9 you have a paginate option when you manually export data to text, however when processing in batch 
    Mary Vertz wrote:
    export in the background
    you had no such option and it simply defaulted to 60 even for those reports that were suppressing the page header. This causes those text files to have a new-page marker at the start of every 62nd line. This causes the data on that line to be moved 1 character to the right and caused many issue with 8.5 backwards compatibility as this functionality was used for flat file interfaces for instance with the bank for positive pay.
    In SP7 they addressed this issue and changed the default behavior to not paginate and enabled a parameter to be passed to control pagination during batch processing.
    If that
    database application
    is PeopleSoft, the parameter that needs to be added to the process request is  -LN<number of lines> ex. -LN60
    Also note that the CPI can be set via the command line as well. For PeopleSoft it's -CPI<numerical value> which defaults to 12 if it isn't specified.
    Unfortunately I do not have the SP7 release notes handy to provide more detail on these options.
    Thanks
    Drew

  • Exporting or Printing each page of a Crystal Report to a separate pdf file.

    Is there a way to export or print each page of a Crystal report to a separate pdf file?  If possible, I would look to use the family nunmber field in my report as the file name.  This is not required, but would be helpful.  Thanks

    Hello,
    Standalone CR Designer doesn't have the ability but CR Server or BOE does. Or if you have a .NET or Java you could write an app that would spit out one page at a time.
    Don

  • Book title/cover page not appearing in exported file?

    Hello, for some reason my book title page on the exported file does not appear the same as my preview copy.
    On my bookshelf, my preview copy (which has a small 'proof' flash) has the cover design as produced in the Author app.
    I have exported the file for somebody else to check the contents of file, when they download and open the file in iBooks the file has a white cover with 'Book Title' on it, not the design that appears in the preview file.
    Many thanks

    Moved to BOE Admin forum

  • IBooks Author: in exported file, one page loads very slowly...

    iBooks Author: in exported file, one page loads very slowly and drags when scrolling through pages, almost stopping the scroll.  I have never seen this problem before with photo pages.  Normally they scroll just as smoothly as text pages.
    I have tried rebuilding the page with more compressed files to no avail.  The image files used on the page are not any bigger than others I have used previously without any problem.
    I have tried restarting my iBook.
    I am using a template that I have modified quite a bit.  The templates currently offered by Apple and third parties are not even close to what I am looking for in terms of layout, so I have to rip almost everything out of the page and start with a blank page, most of the time.  I tried modyfying the layouts to save time and then saved as a new template.  Apple really needs to add a module to create your own template at the beginning of a project.  Or they need to create one very open template, without much on the pages.

    I finally solved the problem by using an unmodified template. I would still like to know how my modifications to the other template caused the problem, but for now it remains a mystery.  Thanks for your ideas.
    Next I will try modifying the template without saving it as a template (merely saving it as a file) to see if I can get away with my modifications.  Also I will make fewer modifications.
    Slowly but surely I am learning this program by trial and error.  Each time I try a few formatting variations, output an iBooks file, and open it on my iPad.  I have probably done 20 of these tests, so far.  Once I work out every detail of the design and structure, I will build the final book.  I am lucky to have a beautiful PDF of the hardcover version, generously provided by my publisher.  This not only sets a high bar for me, but also allows me to use some of their design elements via screen capture.
    iBooks Author has great potential, but I along way to go to get there. One feature I would really like to see in the next update: the ability to add a hidden caption to a photo.  The reader would tap the image and the caption would appear. Tap again and it disappears.

  • When I upload files and correct in lightroom then I export to another named file I keep getting two duplicates. numbered 1 and 2. this never happened before

    When I upload files and correct in lightroom then I export to another named file I keep getting two duplicates. numbered 1 and 2. this never happened before

    When I first upload to lightroom I set up a file called new photos. When I correct them I export to a newly named file. But when I go to the newly named
    File on my harddrive there are duplicate files
    Stan

  • In attempting to export a simple 1-page PDF file to Microsoft Word, I incessantly get the following error message:  "An error occured [sic] while trying to access the service."  Nothing on any of the community forums has helped in any way.  I have downloa

    In attempting to export a simple 1-page PDF file to Microsoft Word, I incessantly get the following error message:
    "An error occured [sic] while trying to access the service." 
    Nothing on any of the community forums has helped in any way. 
    I have downloaded a free trial of Acrobat XI Pro  --  and that too makes no difference.

      while trying to access the service." 
    That'd be associated with trying to connect to the server(s) for one of the Adobe online subscription services.
    (Edit PDF or PDF Pack)
    These online services are separate and independent of the desktop application Acrobat.
    It appears that you have had / are having internet connection issues.
    Be well...

  • Why can I not export files as epub in Pages '09 4.0.3 Lion?

    I was wondering why there is no option to export files as an epub format in Pages '09. Any ideas?

    You need at least Pages ´09 v. 4.0.4, If you don't want Auto Save in Pages stay away from 4.1.
    This page will let you choose which update to download (look at the right column)
    http://www.apple.com/support/pages/

  • The export file from a calc script - naming and date/time stamp

    Here is a simple calc script to export data.
    2 questions:
    1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
    2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
    Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
    Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
    EndFix;
    Edited by: user9959627 on Sep 7, 2012 11:25 AM

    Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Display data from CSV file in iWeb page

    Hi,
    I like to display data from a CSV file in iWeb page if a date value from CSV file matches todays value from the system. Here is an example.
    CSV data values
    01/20/2011,Sunny,87
    01/21/2011,Cloudy,100
    01/22/2011,Rainy,60
    If today's date value is 01/21/2011 the page should display 01/21/2011 Cloudy 100 in a tabular format.
    Appreciate your help in providing HTML code for this issue.
    Thanks

    I suspect there is a soft return in the excel database somewhere that can't be seen. Take the csv/txt file into notepad and look for a line that starts oddly compared to the others.
    I haven't had luck removing soft returns from excel files so I do this a rather odd way. I take the excel file into InDesign as a table, and then use find/change to replace any soft returns with nothing, then convert the text to table and then export the text out again by going export, and selecting text from the dropdown menu.
    For my money, I always save tab delimited text files from excel so that if a field does contain commas, it doesn't "trick" indesign into thinking a new field is beginning or not... instead the field delimiters are tabs and they are unlikely to have been used in the excel database.
    If you do choose to use this indesign import method of mine to clean up the database, i also noticed two things in your screengrab: first was that some fields have spaces at the start of the text... easy enough to fix with a GREP that looks for ^\s (start of a sentence followed by a space) and replace with nothing. The second thing is the T&C field that all entries (at least in the screengrab) all start the same – if all entries in the database start the same, couldn't that line be in the indesign file? Its only a small detail I know.

  • PDF reports sent using MS Mail always named "untitled.txt"

    We are using CR for .NET with VS 2005 developing an application that needs to export PDF versions of reports as email attachments.  While it works the problem we have is that the attachment is always named "untitled.txt".  The attachment actually is a PDF - renaming the extension to "pdf" allows Adobe Reader to open and display the report just fine.  Here is the code used to export the report:
            CrystalDecisions.Shared.PdfRtfWordFormatOptions pdfOpts =
               CrystalDecisions.Shared.ExportOptions.CreatePdfRtfWordFormatOptions();
            CrystalDecisions.Shared.MicrosoftMailDestinationOptions mailOpts =
               CrystalDecisions.Shared.ExportOptions.CreateMicrosoftMailDestinationOptions();
            CrystalDecisions.Shared.ExportOptions exportOpts = new CrystalDecisions.Shared.ExportOptions();
            pdfOpts.UsePageRange = false;
            exportOpts.ExportFormatOptions = pdfOpts;
            mailOpts.MailMessage = "See attached Action Plan for " + qar.FormNumber;
            mailOpts.MailSubject = aiRows[0].ActionID + " Action Plan";
            mailOpts.MailToList = emailAddresses;
            exportOpts.ExportDestinationOptions = mailOpts;
            exportOpts.ExportDestinationType =
               CrystalDecisions.Shared.ExportDestinationType.MicrosoftMail;
            exportOpts.ExportFormatType =
               CrystalDecisions.Shared.ExportFormatType.PortableDocFormat;
            report.Export(exportOpts);
    What can we do to supply a meaningful name for the attached file, and ensure it bears the correct "pdf" extension?
    Thanks,
    Mitchell

    I have exactly the same problem. Has anyone come up with a solution? In CR8.5 the attachment was automatically created with the report file name and a pdf extension, which while not perfect was a good deal better than the current situation.

  • Could renaming export file stop videos from playing

    I am puzzled as to why the videos embedded in a swf file play
    okay within the swf file, but do not play okay on my website. I
    have made sure that the swf file and respective flv files are all
    uploaded to the server, but none of the videos play.
    Pretty well much I followed this tutorial
    http://multimedia.journalism.berkeley.edu/tutorials/flash/building-flash-templates/adding- video/
    I put a FLVPlayback component on my Flash stage.
    I encoded my videos in the CS3 video encoder and followed the
    settings given in the above tutorial link. I did not resize or crop
    the videos, I set the quality to medium and I gave my videos a name
    prior to encoding it.
    After encoding the film, I highlighted the FLVPlayback
    Component and in the parameters found the content path and then
    linked that to my encoded videos one by one. Then I saved my
    worked, played it in the movie tester and then I exported my swf
    file to my Dreamweaver folder, but I did rename my exported file
    (it is not the same name as my Fla file). Could that make a
    difference? I also put my Flv videos in the same folder as my swf
    file and uploaded them to my server. I put the swf file on my html
    page and then uploaded that to my server. My website shows the swf
    file but the videos do not appear at all.
    I would be grateful to know if you see anything wrong with my
    working process here. Could the renaming of the exported file have
    caused the problem? Or, if an avi video is encoded more than once
    does that make a difference?
    I have other swf files up on line that show video, so dont
    quite understand why this time it is not working.
    For those interested the problem file is at
    http://www.marykingmedia.com/marykingmediafive/index.html
    But a swf file with embedded video that plays fine online is
    at
    http://www.marykingmedia.com/marykingmediafour/index.html
    Id be grateful for help here.
    Thanking you.

    A Web designer can code the page to "force" QuickTime (or its plug-in) to be associated to the file type.
    If QuickTime can handle the format the page code will decide how the file is used.
    The QuickTime Control panel offers the viewer some control over file types. Remove the check mark for .mp3 and relaunch your browser (for the change to take effect).
    In theory the viewer should be able to choose which application or plug-in handles a file format. In practice it doesn't always work that way.

Maybe you are looking for