Exporting files from triton le into garage / logic exp

greetings... i'm all over the net, seeking enlightenment, as concerns exporting midi files from a '95 triton-le (no usb), into garage / logic-exp...... slow going it is, & the "one-to-one" sessions, have thus-far, proven somewot of a bust...
i've no interest in the triton's audio (yikes), merely the appropo export of midi-files, into the MBP...
can anyone point-me in the right direction?
thx

can anyone point-me in the right direction?
Doesn't Nashville lies to the southeast?
However: Did you establish a MIDI connection between your Triton and your Mac? And - if your Triton can send it's MIDI on different channels, you could enable the "auto demix by channel" function in Logic to trigger different tracks depending on the channel (usually, drums are on 10 and so on...). In the default setting, Logic will receive MIDI on all channels.
Doing so (auto demix), You can record multiple MIDI channels at once depending on the MIDI channel. Then add the correct software instruments to have nice Logic sounds.
However, Garageband will not record multiple MIDI channels this way.
Fox

Similar Messages

HELP - Export Files from Data Set into Excel (CSV File)

Hello,
I was hoping someone could help me with adobe forms since this is the first time we have used this function at my work. We created an enrollment form, posted it online and 700 employees completed the form (with the submit button it came back to my email). I received all the forms and added them to the dataset in adobe. Now that my forms are complete, I have tried several options to export them into a csv file and it is not working properly. When I use the export button it only brings over 125 of the 700. If I export by clicking on forms>manage form data>merge files into a spreadsheet it brings them all over but is moving my information on some of the rows. For example, some names will be in the name column, some are under social security, etc. I need the exact answer under the appropriate column becuase I can't tell which plan employees chose. I would really appreciate if someone could help. I have searched and searched for the reason this is doing this but I can't seem to locate an answer. Is there another step that I'm missing? Does anyone know why my rows are shifting? We tried to test this before we used it and it seemed to work fine but we only used 5 files. Please Please Please Help Me! This enrollment file is due by tomorrow!
Thank You,
Mary

I've moved your post to the Acrobat Windows user to user forums. You might also want to consider the Adobe moderated Acrobat forums here:
http://www.acrobatusers.com/forums/aucbb/index.php
Kind Regards,
Michelle

Import an FLV file from Adobe Connect into Premiere Elements 12?

The Adobe Connect support staff recommended that we use Adobe Premiere Elements to edit the FLV file that we exported out of their software. We purchased Adobe Premiere Elements 12 based on that advice. Now we see that FLV files are not on the list of supported import files.
How can I import an FLV file from Adobe Connect into Adobe Premiere Elements 12 for editing?

Welcome to the forum.
Over the years, I have used Moyea's Flash Importer plug-in for PrPro, and it has worked perfectly. With about PrPro CS 4, IIRC, Adobe did add an FLV Importer, so Moyea began to suspend development of that plug-in. Then, with the release of the CC version of PrPro, they dropped FLV completely.
Now, Moyea does have other programs, but I do not know if any of them are plug-ins for PrE. However, many of their programs can create, edit and output FLV.
There is also a (free, if memory serves) FLV converter, FLV to AVI, which I used to convert FLV files, before I discovered the Moyea plug-in for my PrPro.
I would look into Moyea, to see if there is anything, that will work as a plug-in to PrE, http://www.video-to-flash.com/products/, and if not, explore a program, such as FLV to AVI: http://www.pazera-software.com/products/flv-to-avi-converter/
Good luck,
Hunt

Export photo from photoshop elements into iPhoto

how to export pic from photoshop elements into iPhoto

Are you using the Adobe Elements Organizer to manage the photos? You'll need to export/save a full sized copy to the Desktop, import the file from there to iPhoto and then delete the copy on the Desktop.

PROBLEM SOLVED "export clips from Color back into FCP & add transition"

If I have two clips that you cannot place a transition in between here is the only thing that worked for me.
I discovered this problem after I exported my movie clips from FCP 6 to Color and imported the color corrected files from Color back into FCP 6. I could no longer add transitions to any of my clips unless I made the following changes.
1. 1st check to see if the video clip has an audio track underneath it. If they are not linked Select the audio and the video track to be linked, hit Command "L" and you will see an underline under the audio and video name to show that they are now linked. Do the same for the adjoining video and audio track.
2. Next select all of the clips after the video clip you just selected by typing "tttt" this changes to the "Select All Tracks Forward Tool". Click on the track after the video track you just linked and it will select all of the tracks thereafter. Hit the "A" button to change back to the selection tool and move all of the selected tracks away from the previous video/audio track.
3. Next type "RR" this will change to the "Ripple" tool. Now click on end of the video track on the previous video clip and type -15 (for negative 15 frames). Then click on the beginning of other video clip to the right that you linked and type +15 (for plus 15 frames).
4. Type "tttt" to change back to the "Select All Tracks Forward Tool" the hit the "A" button to change back to the selection tool and drag all tracks back together again.
5. You may then drag and drop your transition in between both video clips.
I hope this helps someone...this is the only thing that worked for me!!!
Number1talent

I am working with mostly DVCPro ftg, with a few clips in MiniDV. I did have roughly 10 clips with speed changes, but they exported fine two weeks ago, when I did this the first time. (Actually, it didn't keep the speed changes, but it did export with media to FCP).
The clips do have reel numbers and seem to be of the right length per clip but there's just no picture and no assoicated media with which to relink the clip.
I'm on Color 1.5.3
Any possible ideas? Thank you for your help...

Fetching of multiple files from Application Server into SAP Program

Hi All,
I have a issue related Fetching of multiple files from Application Server into SAP Program.
Actual issue is as below.
In the selection screen of my program i will give Application Server Path as :
/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*
Then the based on above input it should pick up all the files that are matching eppi0720* criteria.
Suppose if i am having 5 files with above scenario, i have to fetch all those 5 files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.

If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
 default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
 name_of_file(260) type c,
 name_of_path(1285) type c.
data: begin of file_list occurs 100,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file_list.
data: begin of file,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file.
call 'C_DIR_READ_FINISH' " just to be sure
 id 'ERRNO' field file_list-errno
 id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
 id 'FILE' field p_file
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
 sy-subrc = 4.
 exit.
endif.
* Read the file list and add to internal table.
do.
 clear file.
 call 'C_DIR_READ_NEXT'
 id 'TYPE' field file-type
 id 'NAME' field file-name
 id 'LEN' field file-len
 id 'OWNER' field file-owner
 id 'MTIME' field file-mtime
 id 'MODE' field file-mode
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
 if sy-subrc = 1.
 exit.
 endif.
 append file to file_list.
enddo.
* Write out the file list
loop at file_list.
 write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman

Error while reading excel file from application server into internal table.

Hi experts,
My requirement is to read an excel file from application server into internal table.
Hence I have created an excel file fm_test_excel.xls in desktop and uploaded to app server using CG3Z tcode (as BIN file type).
Now in my program I have used :
OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
DO.
READ DATASET v_filename INTO wa_tab.
The statement OPEN DATASET works fine but I get a dump (conversion code page error) at READ DATASET statement.
Error details:
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'Y_READ_FILE' had to be terminated as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 445. If this number is 0, the second error case, as
mentioned above, has occurred.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4103' is not known to the system.
If the conversion error occurred at read or write of screen, the file
name was '/usr/sap/read_files/fm_test_excel.xls'. (further information about
the file: "X 549 16896rw-rw----201105170908082011051707480320110517074803")
Also let me know whether this is the proper way of reading excel file from app server, if not please suggest an alternative .
Regards,
Karthik

Hi,
Try to use OPEN DATASET v_filename FOR INPUT IN BINARY mode encoding default. instead of OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
As I think you are uploading the file in BIN format to Application server and trying to open text file.
Regards,
Umang Mehta

Cannot place files from Bridge CC into Indesign CC 2014. No option for anything except Photoshop.

I can no longer place files from Bridge CC into Indesign CC 2014. No option for anything except Photoshop.

I can no longer place files from Bridge CC into Indesign CC 2014. No option for anything except Photoshop.

Exporting files from Final Cut Pro in Snow Leopard

I am using Final Cut Studio 2. I recently upgraded to Snow Leopard. Before the upgrade when I would export files from Final Cut the dialog box would automatically go to the last used folder location. Now, each time it goes to the system hard drive. Is there a way to fix this?
Thanks

Fix what?
Just choose the correct folder to which to export.

How do I export file from photoshop CC?

How do I export file from Photoshop CC

Good day!
Export what as which file format?
• jpg, png, gif can be created with File > Save for Web,
• jpg, png, gif, tif, psd, psb, eps, … with File > Save As (check »As a Copy« if needed),
• some video formats, Illustrator Paths, Data Sets with File > Export.
Regards,
Pfaffenbichler

Is it possible to drop animated files from edge cc into premier pro cc ?

is it possible to drop animated files from edge cc into premier pro cc ?

Hi paddymaxg,
As far as I know, there is no such workflow.
Thanks,
Preran

Exporting files from iPod

I have a lot of videos saved to my iPod that got deleted from my computer because I didn't have the space to store them. Now, my sister has an iPod, and I want to give them to her. I want to know if it's possible to export files from an iPod to a computer, but I'd welcome any other suggestions related to the situation.

http://discussions.apple.com/thread.jspa?messageID=2647831&#2647831
http://discussions.apple.com/thread.jspa?messageID=2647790&#2647790
http://discussions.apple.com/thread.jspa?messageID=1660579&#1660579

How I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

how I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

If all you need for further editing is the contents of your Timeline,
then you should follow Harm's sage advice.
Lagarith Lossless Video Codec
http://lags.leetcode.net/codec.html
Ut Video Codec Suite
http://www.videohelp.com/tools/Ut-Video-Codec-Suite
But, if you will need all of your source media files to continue the edit,
you should consider using the Project Manager.
Trim or copy your project
By using the Project Manager, you will be continuing the edit
with the original media files and there will be no quality loss.
Be aware that once you have edited the project in CS6,
it will be problematic (but not impossible) to return to edit in CS5.5.

Issues exporting file from Target group

Hi Experts,
Can someone let me know the process for exporting file from Target group, I am working on CRM 7.0 .
or give me the SNOTE to implement the same.
Thanks
Leela

Hi,
for small Target Groups (i.e. Target Groups that can be displayed completely on the UI, < 10k members) you can export them via the export to spreadsheet button on the header of the Target Group item page (right side). Note that only the members that are shown in the table on the UI are exported. For bigger Target Groups, you can only export them to the application server. To do this, you will have to press the "Export to File" button on the header of the Target Group page. this will schedule a job which exports your Target Group to the application server. You can download it from there using report CRM_MKTTG_FEXP_SHOW_FILE.
Hope this helps
--klaus

I need to upload my files from one directory into other directory.

i need to upload my files from one directory into other directory.( all its contents,folders,sub folders, files etc)
for this task
suppose my source folder is C:/test/test1/test2/test3
and my destination is D:/
first i have to check whether my dest dirctory already contains source directory..and its files
if it contains the same structure then i have to replace the destination dir structure to source dir structure( to upadte changes)
if it(dest dir) not contains source dir ..means it doesn't contain source folder then
i have to create same source folder directory structure ( test.test1/test2/test3...) at destination(D:/) and copy all its contents frm source directory...
( means i don;t want to create manually same dir structure as source at destnation dir to copy all contents)

I believe you need to read up on the class File.java (it comes with java).
Some examples:
File file = new File("C:/myDirectory");
if(file.isDirectory())
System.out.println("this is a directory");
if(file.isFile())
System.out.println("this is a file").
You will then need to read up on other classes to read/write to the file such as FileReader and FileWriter.

Exporting files from triton le into garage / logic exp

Similar Messages

Maybe you are looking for