Exporting Flash(SWF) and Getting No Audio

Hello All,
I'm new to these boards and have only posted once previously.
I'm recording lectures with Captivate 3 for University
professors speaking in front of a class using power point. I have
one Captivate project with about 570 slides. When I publish this
project to SWF and play it in html and/or the skin player there is
no audio.
There is audio when I play each slide or when I preview the
project but no audio when I publish it.
I have audio selected as MP3 96 kbps, 44.10 KHz in the
preferences of Publish but there's just nothing.
Any ideas of what could be going wrong?
Also, I'm not sure if I should post this in the Recording
category but during some of these long recordings, part of the
lectures end up recording blank white slides. There is audio as the
professor is speaking and surely there's an image on the computer
with power point but Captivate is recording pure white. Troubling.
THANKS!

I have the same problem here. I only have 47 slides, and
about 12 have audio. The total size of the .cp file is 15 mb. I
only hear audio when I am looking at the slides and press F3. None
of the slides are muted. I have made sure that the "Include Audio"
checkbox is checked. I do not have audio in preview mode or in the
published swf or exe file. I am at a loss here.

Similar Messages

Macbook pro. app tries to use flash player and get " Blocked plugin" how to uninstall and reinstall flash player. update does nothing ?

Wife has an older MacBook Pro. when an app uses flash player "Blocked plugin" comes up. I don't know much about mac, tried to update flash player and get newer version already installed, and update and still get same message. How do I uninstall flash player and reinstall?

Sounds like it is blocked for the website you are at. Check with this:
You can quickly test whether a recently added plug-in is causing problems by blocking it.
Choose Safari > Preferences, click Security, then click Website Settings next to Allow Plug-ins.
Select the plug-in you want to disable on the far left, then click each pop-up menu on the right and choose Block.For some plug-ins, you see pop-up menus for different websites, and you can choose to block each one individually. Use the “When visiting other websites” pop-up menu to block all other websites that don’t have individual settings.

Exporting to video in flash cc and getting no sound

i am trying to build a movie using flash cc and have placed a mp3 voice over on its own layer. when i play it back as an swf file it works perfectly. however, when i go to File>export>export Video i get the .mov movie but the voice over is no longer there. any idea of what i am doing wroing?
[email protected]

Can you also try this -
Add a blank keyframe or a keyframe at the starting of the sound in the timeline layer. Does this help in playing sound in the exported video?
-Sujai

Horizontally centering flash .swf" and disallowing horizontal scroll??

Is it possible to center a flash .swf file on a website, and then disable horizontal scrolling?
I made my website in Flash Catalyst, and I made the width 1700px and the height 1200px. I made the width large because I wanted it to look good in the largest screen resolutions, but my biggest problem now that I've finished making the website is putting it up. Simply embedding it makes it scroll horizontally all the way to 1700px, which isn't good for those with small browsers.
Originally, I was planning on making the flash file the background in CSS (using body {background: url(FILE.swf) no-repeat #000 top center}) but then I found out you can't put .swf's as backgrounds.
Basically, I want to know if it's possible to center the .swf horizontally, and then disallow horizontal scrolling. I want to keep vertical scrolling,
Any help appreciated!

Is it possible to center a flash .swf file on a website, and then disable horizontal scrolling?
Yes, but it introduces other problems. With scrolling disabled, you might not be able to see all the page. I DO NOT recommend what you are trying to do. Flash scaling would most likely give you better results.
Background images if intended to cover a large area are typically very small images which are repeated to create a pattern. Using one large image will still never cover all the possible screen resolutions or page sizes... for example larger than 1700 or taller than 1200 pixels.
Centering requires a set dimension, like 1700 so auto set margins would center it, but it still may not cover 100% as using a width of 100% would.
That being said, turn off horizontal scroll and leave vert on with:
overflow-y: auto !important;
overflow-x: hidden !important
then you'll need to use z-indexing to lay anything else over the top of you background .swf
Here a sample page that should get you going... dimensions are smaller so you can see how it works... the principle is the same.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>No Scroll</title>
<style type="text/css">

</style>
</head>
<body>
<div id="main_container">
<div id="flash">
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" width="800" height="600" id="overflow" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="overflow.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#ffff00" /><embed src="overflow.swf" quality="high" bgcolor="#ffff00" width="800" height="600" name="overflow" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
</object>
</div>
<div id="content">
<p align="center">This is the center</p>
</div>
</div>
</body>
</html>
Best of luck!
Adninjastrator

Indesign CS4 - Export to SWF and font issue

Hello,
How do you embed a font in an Indesign CS4 document when you are going to export it to an SWF file?
I have an Indesign CS4 document that uses a particular font. This document is then exported to an SWF file which is then uploaded in our intranet website. When users view the internal website, the SWF font uses a different font like Times New Romans. I do not get this issue because I have the particular font used in that document installed on my machine.
Are there any work arounds for this issue other than distributing the font used in that exported SWF file?

InDesign should embedd fonts by default when exported to swf... may be you have some protected font in use? do you have problems with other fonts too? Quick and dirty workaround is convert your text to outlines... not good one but fast...

Load swf and get a SimpleButton in it

I load a swf and want to get a button in the swf. But the button I get is NULL. I am sure the button's name is right and exists. Could somebody help me to solve this problem?
package
import flash.display.MovieClip;
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.events.ProgressEvent;
import flash.display.SimpleButton;
import flash.display.LoaderInfo;
public class MyClass1 extends MovieClip
public function MyClass1()
   super();
   var swfLoader:Loader = new Loader();
   addChild(swfLoader);
   var bgURL:URLRequest = new URLRequest("secondFlash.swf");
   swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadProdComplete);
   swfLoader.load(bgURL);
   var currentSWF:MovieClip = new MovieClip();
   function loadProdComplete(e:Event):void {
     var loaderInfo:LoaderInfo = e.target as LoaderInfo;
      var mv:MovieClip= MovieClip(loaderInfo.content);
    var btn1 = mv.getChildByName("btn1") as SimpleButton;
    trace("mv"+mv);
    trace("btn1="+btn1);

The code you show works fine for me. How is btn1 created/named in the second swf file? If you create it dynamically and do not assign a name property to it, it does not have the name you think it does.

I have a question about Flash swfs and Scripts

I have a Flash swf file and it is made up of my logo and stuff going past it and around it, behind it, and such. What can I do to it, so when somebody enters the page the logo will appear at the center of the page and then progressively move up until it hits the page logo and then kills the swf file?

I wouldn't give up hope on getting some ideas for how to get what you want, trying things can be the best way to learn. But you should clarify things because your current description is a little hard to follow. You say you want a logo centered on a page moving up the page towards a logo, but then you say the page fades in when the logos meet (Wasn't the page there already?). It's hard to differentiate the logos and the pages from your description. Or maybe it's just me not being able to follow it.
If you want a splash screen, then typically a splash screen will play thru whatever it does and then initiate a redirect to the home page. This redirection would be coded into the Flash file.
If you want the home page to fade into view, then you'd either have to build that page as a movieclip in the Flash file or try to utilize a page transition in the browser. It has been so long since I even tried using a browser page transition that I couldn't tell you how to set it up, but if memory serves me well, IE was the only browser at the time that supported them, and I don't know if that has changed. (I don't know enough to know if there is a CSS solution to making a page fade in)

Difference between a Flash *.swf and a Flash *.flv video?

What is the difference between a *.swf and a *.flv video?
AFAIK both are Flash videos.
Are they compatible?
Is there a player (not from MS) which plays both videos?
Peter

Im guessing you're a complete newbie to all this, so in
simplistic terms:
- The FLA is the source flash file (the bit that contains all
the design stuff and code). When you publish a FLA, it creates a
SWF file.
- The FLV file is a video which has been converted to flash
video format.
- A SWF displays anything thats been created within the FLA
to provide things like a wizzy website, advertising banner or can
be used to show a FLV (flash video) with added functions. Although
it sort of points to the video rather than storing it inside (so
the file is smaller and manageable)
The benefits of using a SWF to play FLV's is that it displays
at lot quicker. F4V's (another variance) I've now discovered,
although are larger files, also display very quickly even with
larger files.
In terms of playback - do you want to view online or offline?
to view online, you just need to make sure you have flash
installed on whatever machine you're using - pc/mac.
to view offline (from your hard disc), download the Adobe
Media Player
http://www.adobe.com/products/mediaplayer/
or http://get.adobe.com/amp/

Using papervision in flash builder and getting TypeError: Error #1009: when using object.pitch(5)

When i use papervision in flash builder and i am doing a test, when i render a sphere using papervision with the following code it renders me the sphere.
When i add a line sphere.pitch(2); ||
sphere.yaw(2);
sphere.roll(2);
i get the following error,
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at PvTest/onRenderTick()[D:\Android 3D\PvTest\src\PvTest.as:39]
Can anyone help me figure out the error
For additional Info, these are the imports i am doing:
import org.papervision3d.objects.primitives.Sphere;
import org.papervision3d.view.BasicView;

I followed the steps and read some of your comments on the same top topic in another thread. When I put it on the first frame it was okay but the next button on that page had the same problem. So what I am guessing is that I have to either create a document class or put the actions where the buttons are. Am I understanding that correctly? In the other thread in which you helped someone else; there was so comments about document class. I found a tutorial on it and the way I understand it is that it you can put you actions in an external document. But you have to include in the event listener the frame in which you want that action to happen.
Thaks for your help. And patience.

How do i uninstall flash player and get lightspark to take its place?

how do i uninstall flashplayer and get lightspaerk to take its place?

From your list of plugins, it sounded as if LightSpark is already installed. Now we just need to disable the old version of Flash plugin so it doesn’t conflict with that.
What Linux distro are you using? Depending on that, the uninstallation process differs. Try one of the steps outlined on this website: http://www.ehow.com/how_6827457_uninstall-flash-player-linux.html

Flash .swf and .flv player

I need to put a link, "view movie," on a website page. The movie is an .swf, and I'd like a Flash media viewer to open in a window (about 400x400px) when the link is clicked. I don't need the viewer to be a permanent part of the page -- I just want it to open in a pop-up window that can be closed when the person viewing is finished. I know I can just insert the .swf and it will open on link click in a separate window and autoplay (Dreamweaver CS4), but there are no start, stop or volume buttons on that window, and it doesn't look like I can insert them from the behaviors panel. I don't have Flash on my computer. I just need to be able to allow a movie to be played on my webite.
Any suggestions for low-priced, but good extensions? If not needing an extension, any other good fixes?
Tom

What happens when you change it - does it work?
If not, you may be better off to ask in the Flash or Dreamweaver forum, as this is not really a Flash Player question.

Opening flash .swf and constraining it to it's original size rather than full-screen

When I open a flash object (.swf) from my desktop to test it, it opens full screen. I would like to constrain it so that it opens to the size it was created, e.g., 800 x 600.

If you open an SWF link directly in a browser tab then you always get the dimensions of that tab. You either have to open the link in a new window and resize it or use the above mentioned bookmarklet code with a keyword and the url as the parameter to replace the %S. Bookmarklet code like that is very handy as you can also use it if Firefox insists in downloading a file (image) and you want to open it in a tab. Of course you need to supply the correct MIME type in that case.
* http://en.wikipedia.org/wiki/Bookmarklet
* http://en.wikipedia.org/wiki/Data:_URI_scheme

Hooked up hdmi to hdtv and get only audio and a "profiler" screen view; cannot play dvd on HDTV

Hooked up mini display port / HDMI to my TV and only get audio of DVD. Do see original apple desktop image and image of selected "window" display. cannot manipulate "window" menu. How do I get video and audion from DVD?

Funny things happen you are using an external display in mirroring mode. I generally avoid it. My preference is to set my MBP up to my monitor or HDTV with a wireless mouse and keyboard and use the laptop in lid shut mode.
If you've never done this, hook up a wireless mouse and keyboard and hook it up to your TV. Shut the lid of the MBP and after say 10 seconds hit the keyboard or wiggle the mouse. The laptop will now only be driving the external display so if you change your settings to that of the TV all should be good!

Flash swf files getting errors in dw8

For a student assignment, I am trying to load flash files,
actually the files are all linked through LoadMovieNumber, so what
I really need to do is load the swf. files in dreamweaver to post
them to our student website. Dreamweaver recognizes the files, but
when I try to place them in the remote file it is giving me this
error-
gd251kga2\firstsigns_drink.swf - error occurred - An FTP
error occurred - cannot put firstsigns_drink.swf. Access Denied.
The file may not exist, or there could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not
completed.
Files with errors: 1
gd251kga2\firstsigns_drink.swf
But only on 3 of the 10 swf files I am loading...all are
located in the same folder, all are updated and work properly.
Does anyone know why this might be happening and anyhting I
can try to fix it?
Thank you
JJ

It sounds like there are problems with the folder you are
uploading to. Given this is a school computer you probably don't
have access to change the necessary permissions. Try renaming the
file and uploading under a different name then rename on the remote
server or update your file to recognize the different name.

Exportiing to uncompressed AVI and getting no audio or video??

When I choose Export > AVI. Options = No Compression on either the video or the sound. I get a 7gb file that opens and shows a running time of 0:00 and plays nothing in Quicktime.
Any clues what I'm doing wrong here?

after further reading I found that you can't hook up a gen 5 iPod with component av cables.

Exporting Flash(SWF) and Getting No Audio

Similar Messages

Maybe you are looking for