Exporting for e-mail

I transfered a short 30sec movie clip from my DV cam onto iMovie. I saved it as a quicktime movie for e-mail purposes. I e-mailed it to a friend thru hotmail. The problem was, it was too small to view the clip when opened. Is there a way I could make this clip bigger but compress it way down that I could send it thru e-mail?
Mac OS X (10.3.9)

luvmacs,
The QuickTime presets that iMovie uses for web, mail etc. are kind of a one-size fits all. While it does make things easy you don't always get quite what you want.
However, you can also adjust the settings manually. Just choose Share>QuickTime>Expert Settings. After you click Share select Export to QuickTIme Movie from the drop down menu and click options.
I won't pretend to know what all the settings are for but I'd try playing around with size and frame rate. Through some trial and error you should be able to find something bigger that can still make it through as an email attachment.
Matt

Similar Messages

Mail export for OS 10.8.5

Mail export for OS 10.8.5 (OS Mountain Lion):
How to export your mailbox?
Press Option button (keyboard) AND select "Go" folder using your mouse at the top of the window in Finder.
Look for "Library" on the menu bar. After you select the Library, you will see Mail folder.
Open that Mail folder.
There is only one folder that shows you "V2." I do not know why it is created. Go look inside that folder.
Now, you see your created mail folder such as Mailboxes, MailData, POP- ... folders, and RSS. Please becareful.
Please go back two times (arrow left) where you found Mail folder.
Finally, you drag that specific folder manually - Mail folder into your external hard disk drive. That's what you wanted for your backup.
Hope that help!

Mail export for OS 10.8.5 (OS Mountain Lion):
How to export your mailbox?
Press Option button (keyboard) AND select "Go" folder using your mouse at the top of the window in Finder.
Look for "Library" on the menu bar. After you select the Library, you will see Mail folder.
Open that Mail folder.
There is only one folder that shows you "V2." I do not know why it is created. Go look inside that folder.
Now, you see your created mail folder such as Mailboxes, MailData, POP- ... folders, and RSS. Please becareful.
Please go back two times (arrow left) where you found Mail folder.
Finally, you drag that specific folder manually - Mail folder into your external hard disk drive. That's what you wanted for your backup.
Hope that help!

Using export quiktime conversion for e-mail

I finished a 4 minute final cut pro file. I'd like to e-mail it to people.
What's the best way to do that?
I use QT conversion MPEG4, but its too big for e-mail.
Any suggestions?
Thanks
Gerry

A four minute file (even after the export to email size) may still be too large to add as an attachment. Most emails are limited in file size to a max (.Mac Mail) of 10MB's.
Sign up (even the trial mode) for a .Mac account and you will get page making tools that will allow you to showcase your work in a Web page.
Use H.264 video if your intended audience uses QuickTime 7 (Mac or PC). Use other (older) video codecs like MPEG-4 (QuickTime 6 compatible) for your PC viewing friends.
Note: They may still need to download QuickTime to view your .mp4 files.

Is there a way to get an apple mail folder exported to outlook mail folder structure? I'm using Gmail on my IMAC and have a PC for work. Want to share folder structure between systems.

Is there a way to get an apple mail folder exported to outlook mail folder structure? I'm using Gmail on my IMAC and have a PC for work. Want to share folder structure between systems.

Use following steps to import apple mail to outlook:
Choose Mailbox->Export Mailbox, or choose Export Mailbox from the Action pop-up menu
Choose a folder or create a new folder where you want to store the exported mailbox.
Outlook for Mac: Choose File->Import Mailboxes. Select the mail application you want to import messages from.
If it does not work then you should use third party apple mail to pst applications. You can easily search in Google about these applications.

Exporting multiple e-mails as .pdf

I'm responsible for coordinating a multi-author, book-writing project and I've been asked to store all e-mail correspondences in a fashion that allows all of the authors and project managers to access the e-mails. I have a shared folder set up on my Google drive that allows all the users to access shared files which is working fantastically, but I can't find a way to export large quantities of e-mails at the same time that also works for Google drive.
After a quick Google search I found this site which provided instructions on how to install this set of scripts which allowed me to archive my selected e-mails as .rtf files with their attachments. It works great and allows me to customize the naming of the files to allow other authors to easily locate a specific e-mail. It names each file "From %f to %t - %s - %M %d, %Y.rtf" where %t is the recipient, %f is the sender, %s is the subject/thread topic and %M %d, %Y is Month day, year (eg To John Smith from Jane Doe - Book Project - December 12, 2012.rtf).
Unfortunately, after uploading the folder containing all these .rtf files I found out that .rtf can't be viewed on Google and must be downloaded then opened on the user's computer. To fix this I tried having Google automatically convert the files to Google docs as it uploaded the files, but this didn't work and even if it did I fear the files would lose their attachments.
I then tried searching for scripts that would allow me to change all of the .rtf files to .pdf. I found and tried a few, but they all had problems (the script would only operate on pre Mountain Lion, the requires Word for Mac, etc.)
Then I tried finding a script that would work like the first successful one, but export the files as .pdf rather than .rtf. I couldn't find anything, but found an article that reminded me I could print to .pdf from mail ("Save as PDF..." in the system print window). I tried doing this, but after 'printing' the first of all the e-mails an error box pops up and no more e-mails 'print.' If I "Open PDF in Preview" I can successfully save all of the e-mails as .pdf, but their file names are all Preview of "<e-mail subject>".pdf which isn't helpful because nearly all correspondences in the group have a subject like "Book" or "Book Project" meaning it'd be impossible to determine which e-mail is which by the .pdf filename.
I feel like their are a lot of different routes I can take to solve this problem, I just need help finding the components:
1. Use the first successful script to export as .rtf, then use another script to convert them to .pdf. This would be the best because it will allow me to use a useful filenaming system. To do this I need a script that can convert .rtf to .pdf on my system.
2. Find a script like the first, successful script I used that allows me to export the e-mails as a .pdf using the subject, to/from, etc. as the filename.
3. Open PDF in Preview, save, then use a script to rename all the files by extracting the subject, to/from and date from the .pdfs. To do this I need a script that can find the subject, etc. in the .pdf and use that data to change the file name. (I highly doubt such a script exists and I don't have the script-writing skills to create one myself.)
4. Any other solution that allows me to take a lot of e-mails from my Mail app and upload them to my Google drive while maintaining attachments and generating logical filenames.
5. Any other solution that makes it possible for me to make correspondences available for all authors to access (keeping in mind that cross-platform compatibility is essential).
Suggestions?

I found your first suggestion while doing a Google search. That post was made in mid-2011, almost a year before Mountain Lion released. Apple changed the way scripts work in Mountain Lion and this script no longer works.
As far as I can tell, the second solution only works for printing one e-mail to a .pdf at a time and doesn't support batch filenaming.

Script for getting mail if database is down

Hi Friends,
OS Version : IBM AIX 5,2
Oracle version : 9.2.0.7
I am executing the following script for getting mail alert if database is down. some how the script is not working
check_stat=`ps -ef|grep ${ORACLE_SID}|grep pmon|wc -l`;
oracle_num=`expr $check_stat`
if [ $oracle_num -lt 1 ]
then
exit 0
fi
# Test to see if Oracle is accepting connections
$ORACLE_HOME/bin/sqlplus -s "/as sysdba" > /tmp/check_$ORACLE_SID.ora
select name from v$database;
exit
# If not, exit and e-mail . . .
check_stat=`cat /tmp/check_$ORACLE_SID.ora|grep -i error|wc -l`;
oracle_num=`expr $check_stat`
if [ $oracle_num -ne 0 ]
then
mailx -s "$ORACLE_SID is down!" [email protected] < /tmp/check_$ORACLE_SID.ora
exit 16
fi
I am saving this as .sh file and executing at command prompt. It is just hanging, but not throwing any error.
I would like to know if there is anything to be modified in the script or please provide me any such script. Thanks in advance

HI there.
I have a script I use that works really well. It sends out an email only if the database is down and also reads an ini file to process a blackout period and a priority level of the database... High priority databases are monitored every 5 minutes and Medium priority databases every hour.
There are two scripts, the shell script and the .ini file and I have two cron entries...
Check script:_
#!/bin/ksh
# check_oracle_status.sh
# Script to check if Oracle db's are up and running.
# Script is passed a priority field and reads check_oracle_status.ini
# to determine which db's to check. If db is down an email is sent.
# Priority Levels:
# H - Checks db's with "H"igh Priority every 5 minutes (cron)
# M - Checks db's with "M"edium Priority every hour (cron)
# L - db's with "L"ow Priority currently not checked
# Script Change History:
# ======================
# October 29th, 2009 - Initial Creation
# Set environment
export SCRIPTHOME=/opt/oracle/admin/scripts
export INIFILE=$SCRIPTHOME/check_oracle_status.ini
export PRIORITY=$1
. $HOME/.profile
db=`grep -i ":$PRIORITY" $INIFILE | cut -d":" -f1`
check_database()
sqlplus <<! > $SCRIPTHOME/check.out
/ as sysdba
select * from dba_data_files;
exit
grep ORA- $SCRIPTHOME/check.out > $SCRIPTHOME/error.out
if (( $? )); then
echo ""
else
mailx -s "Oracle instance $i is currently UNAVAILABLE" +<email address>+ < $SCRIPTHOME/error.out
fi
for i in $db ; do
fields=`grep $i $INIFILE | awk -F':' '{ total = total + NF }; END {print total}'`
export ORACLE_SID=$i
if [ $fields -gt 2 ]; then
BLACKOUT_START=`grep -i "$ORACLE_SID" $INIFILE | cut -d":" -f3`
BLACKOUT_END=`grep -i "$ORACLE_SID" $INIFILE | cut -d":" -f4`
CURRENT_HOUR=`date +%H`
CHECK_BASE=YES
if [ $BLACKOUT_START -gt $BLACKOUT_END ]; then
(( $CURRENT_HOUR >= $BLACKOUT_START || $CURRENT_HOUR <= $BLACKOUT_END )) && CHECK_BASE=
else
(( $CURRENT_HOUR >= $BLACKOUT_START && $CURRENT_HOUR <= $BLACKOUT_END )) && CHECK_BASE=
fi
if [ -n "$CHECK_BASE" ]; then
check_database
fi
else
check_database
fi
done
rm $SCRIPTHOME/check.out $SCRIPTHOME/error.out
INI File:_
oracle1:L
oracle2:M:17:08
oracle3:M
oracle5:M:17:08
oracle6:H
oracle7:M:17:08
oracle8:M
oracle9:M
Where oracle1,2,3 etc is your sid
L M and H your priority level
17 is blackout start (5 PM)
08 is blackout end (8 AM)
Note: Blackout is just a start hour and an end hour and must contain both or none and my script can only process one blackout per database. I guess if you
needed a second blackout you could add another line with different times for that sid
Cron entries:_
# Check Oracle Status
# The check_oracle_status.sh script monitors "H"igh priority databases every 5 minutes
# and "M"edium priority databases every hour
0,5,10,15,20,25,30,35,40,45,50,55 * * * * /opt/oracle/admin/scripts/check_oracle_status.sh H > /dev/null 2>&1
0 * * * * /opt/oracle/admin/scripts/check_oracle_status.sh M > /dev/null 2>&1
Not sure if you require blackouts or priority levels but this setup works great at our site.
Hope this helps.

InDesign / Best way to export for Web?

Hi guys,
I did an A2 (large size) poster and now i need to have the very same image for Web Mailing on Internet. I guess it will be a 650 pixeles by 800 px.
Which is the best way to export this content for Internet?
1) I notice that if i save the InDesign file to PDF even in the lowest quality the small text keeps crisp and clear while the file is very small size. Unfortunately PDF cannot be used -i think- as embedded images into a mailing list.
2) If i export the very same InDesign file at the highest posible resolution as JPG -a traditional Internet image standard- the text is blurred and not well defined, besides the file is quite large.
3) Should i exported to PDF and then open in Photoshop and "Save for the Web" as JPG? Maybe Photoshop has a better exporting engine when regarding to images than InDesign...i don't know.
How can i find a way to have well defined crisp and clear text, small size and image? I am not sure i could use PDF format here.
Any help or ideas? that would be great
Thanks,
S

Thanks for the tip!
I am sorry i forgot to say i have an A2 and an A3 size poster version. I used the A3 poster and the 650 pixeles poster for Internet actually turn out to be quite readable. I used quite large fonts size in the original design, a bit of a Swiss or Constructivism style poster.
Cheers

Sending INVOICE as attachment in PDF for external Mail address

HI!,
We have made configuraiton for sendin mail while saving VF01 or VF02 from SAP R/3 to external id.
Email is going to the partner Payer but the attachment of the invocie is going as OTF format and not in PDF.
Where i am missing. I have gone thro the discussion thread of srinivas talks about some coding required in Program which what is that
thanks in advance

Hi,
Check this program.
Re: send a mail thro abap report
Posted: Mar 14, 2006 11:40 AM Reply E-mail this post
hi,
the below program will help you to send email with any kind of attachment.It is working fine for me.Just try it.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
*PARAMETERS : appfn(150) TYPE c LOWER CASE OBLIGATORY.
DATA : pos TYPE i.
DATA : len TYPE i.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
*file_name = appfn.
*OPEN DATASET appfn FOR INPUT IN BINARY MODE.
*DO.
READ DATASET appfn INTO ITAB.
IF SY-SUBRC EQ 0.
*APPEND ITAB.
ELSE.
*APPEND ITAB.
EXIT.
ENDIF.
*ENDDO.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
SELECT SINGLE * FROM crmrfcpar WHERE consumer = 'CRM'.
v_rfcdest = crmrfcpar-rfcdest.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' DESTINATION v_rfcdest
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
-suresh

CLASS cl_bcs Query for sender mail id

Hi,
I am using class cl_bcs.but, i am facing problem for sender mail-id. I want to append mail-id directly to sernder mail-id without using user mail attribute.
Is there ne way from which i can append mail-id as sender mail id??
thanx in advance,
Sameer

you can do that.
check this code sample.
DATA: sender             TYPE REF TO if_sender_bcs.
CLEAR sender .
        sender = cl_cam_address_bcs=>create_internet_address( '[email protected]' ).
        CALL METHOD send_request->set_sender
          EXPORTING
            i_sender = sender.
and check this code sample for complete code.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5931ff64-0a01-0010-2bb7-ff2f9a6165a0
Regards
Raja

Error during SWN _ SELSEN execution for exteneded mail notification

Hi,
I have configured all the requried settings for extended mail notification in SWNCONFIG. But when i execute SWN _ SELSEN I am getting an error'CX_OS_INTERNAL_ERROR'.
More details are below
"UNCAUGHT_EXCEPTION" "CX_OS_INTERNAL_ERROR"
"CL_OS_SYSTEM==================CP" or "CL_OS_SYSTEM==================CM00L"
"OS_GET_CLASS_AGENT_BY_REF"
Version        : 2.0
Precondition   : I_OBJECT is not initial and an instance of a
                 persistent class.
Postcondition : The class agent is active.
OO Exceptions : propagates GET_CLASS_AGENT, CX_OS_INTERNAL_ERROR
Implementation :
Changelog:
- 20010106 : (SB) Initial version
- 20050209 : (SB) Check for initial reference added.
data DESCR_REF          type ref to CL_ABAP_TYPEDESCR.
data CLASS_KEY          type SEOCLSKEY.
data CLASS_NAME         type STRING.
Get classname
call method CL_ABAP_TYPEDESCR=>DESCRIBE_BY_OBJECT_REF
    exporting
      P_OBJECT_REF = I_OBJECT
    receiving
      P_DESCR_REF = DESCR_REF
    exceptions
Please let us know if u have any suggestion to resolve this issue.

Hi,
I have configured all the requried settings for extended mail notification in SWNCONFIG. But when i execute SWN _ SELSEN I am getting an error'CX_OS_INTERNAL_ERROR'.
More details are below
"UNCAUGHT_EXCEPTION" "CX_OS_INTERNAL_ERROR"
"CL_OS_SYSTEM==================CP" or "CL_OS_SYSTEM==================CM00L"
"OS_GET_CLASS_AGENT_BY_REF"
Version : 2.0
Precondition : I_OBJECT is not initial and an instance of a
persistent class.
Postcondition : The class agent is active.
OO Exceptions : propagates GET_CLASS_AGENT, CX_OS_INTERNAL_ERROR
Implementation :
data DESCR_REF type ref to CL_ABAP_TYPEDESCR.
data CLASS_KEY type SEOCLSKEY.
data CLASS_NAME type STRING.
Get classname
call method CL_ABAP_TYPEDESCR=>DESCRIBE_BY_OBJECT_REF
exporting
P_OBJECT_REF = I_OBJECT
receiving
P_DESCR_REF = DESCR_REF
exceptions
Please let us know if u have any suggestion to resolve this issue.
Attachment: Error.doc

Reducing pizel size for e-mailing

How do I decrease the pixel size of my photos for e-mailing. I take HQ photos on an 8MP camera and the files are too big to e-mail.
Thanks

Hi zmaxman,
If you have set up your email client in iPhoto preferences:
select the photos in iPhoto and hit the email icon in the toolbar.
In the next window, choose the size.
If you use a web based email client such as Yahoo or Thunderbird you have to select the photos, go to share>export
Input the size you want, then export to a folder on the desktop. Use those photos to attach to your email. You can delete the folder after you are done.

None of my apple apps can export files, including Mail, iPhoto, Aperture and Preview.

None of my apple apps can export files, including Mail, iPhoto, Aperture and Preview. When I try to export a file from any of these programs, the app hangs for a few seconds and then does nothing, not even open an export dialogue. Same thing happens when I try to attach a file to an email. Also, maybe related and maybe not, Photoshop will crash after the splash screen. All of these app function properly when using a different User Account.
I've tried deleting my application preferences in my user library and when that didn't work, I deleted my account and then created a new one that used the same user directory, which still didn't fix anything.
I don't really want to make a new user from scratch and have to re-enter license numbers, re-calibrate monitors, recover bookmarks, contancts, etc. etc. if I don't have to, so I would be grateful for any advice.
Thanks!
System: Early 2008 Mac Pro, 3GHz 8 Core with 12 GB RAM, Nvidia GTX 285 (mac edition). Running OS X 10.8.4

You cannot change your iCloud email address but you can setup a new alias: http://help.apple.com/icloud/#/mm6b1a490a
You cannot transfer purchases from one AppleID to another.

Export feature in Mail.app literally does nothing?

I used to use the export feature in Mail.app fairly frequently to back up my GMail and some other email to a local disk.
Now the export feature seems to do almost literally nothing.
No matter what account, folder, sub-folder, or "mailbox" I choose, when I export it, I end up with 3 files: Info.plist and table_of_contents, both of which are trivially small (maybe 30 to 200 bytes) and an mbox file, which should contain my emails, but it's zero bytes.
Is anyone else seeing this problem?

Have you applied the latest Mail update from the Apple Downloads site: Mail Update for Mavericks. This Apple document describes the fixes: OS X: About Mail Update for Mavericks
OT

Exporting to Unix mail boxes and lots of other problems

The newer themailer gets the worse it gets. The mailer won't do moves successfully, won't get and save all xcontents all the time as it should, delays showing mail it gets, and on and on. I want to export all of my emails (100,000 or so of them) to Unix email formats so I can escape the crappy applicaiton and go back to elm or some other mailer. How do I export to Unix mail box format? Don't bother to tell me to drag and drop to the desktop. It does not do the translation!

To convert to mbox, emlxconvert says it will do the job.
I can't make head nor tail of the other problems you say you are having. (I happily used elm for 15 years before switching to Mail.app about 2 years ago, but now you couldn't pay me to go back.)

Thunderbird fails to send email when "Scan email for junk mail" option is checked in Server Admin

I have 2 clients that need to send mail through my server, one Mac and one Windows. The Mac uses apple mail and the Windows machine uses Thunderbird.
Apple Mail will send fine, it is set up for "Use Default ports 25, 465, 587" and "Use SSL" and "Authentication: MD5 Challenge-response".
Thunderbird refuses to send and I don't even see any errors showing up in the Console on the OS X server under smtpd entries.
If I uncheck the "Scan email for junk mail" option on the server, then Thunderbird will send fine.
Thunderbird is set up as: "smtp port 587 (default)" "connection security: STARTTLS" "Authentication method: Encrypted Password"
May or may not be relevant: I use virtual domains as well as aliases.
Server: Mac OS X Server version 10.5.8

Solved it, looks like maybe the smtpd settings for sasl authentication may not have been correct. I followed everything in http://osx.topicdesk.com/content/view/38/41/ the "Frontline Spam Defense for OS X server" guide and now can send mail just fine from Thunderbird Winodws and from Apple Mail.

Exporting for e-mail

Similar Messages

Maybe you are looking for