Exporting for the best quality

I am making a highlight tape of my children with some music. What is the best way to export the sequence for DVD with the best quality? DO I export it using the "Quicktime" option and make it a "Self contained movie" or do I uncheck this box? (There is no chapter markers in my film).
Thanks

You should export as QuickTime Movie. Don't use QuickTime Conversion.
Also, if FCE and iDVD are on the same computer, you don't have to make a Self-Contained movie. Uncheck the box and your export will go much faster, with no loss of quality.
In iDVD Preferences, check the box for "Best Quality"

Similar Messages

I've imported a giant cd collection for my work in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for

I've imported a giant cd collection for my boss in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for compatability reasons with other software using iTunes. When I try to transfer the library I lose all of the CD metadata and end up with only track names. Is there a way to transfer everything along with the metadata?

Not easily. WAV format does not store tag information in the file. Realize both AIFF (equivalent to WAV) and Apple Lossless (full quality but smaller files) do, so WAV was unfortunately the worst format to chose.
If you have to go with what you have you will have to explore exporting the library as .xml, moving it and the files to the other computer, then rebuilding a lower version library with the two sets. I am not sure if you can do it with the library.xml file that already exists or if it too differs according to version. You may end up having to export the files as a playlist. You will, of course, lose artwork too, though you can try fetching it from the iTunes Store later.
Some of what you need to do is outlined in these articles though you have the added limitation that you are not building a library of the same version. (It really is a piity you choose WAV, otherwise you could have simply added the ripped files and most of the data would have traveled with them.)
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

I recently purchased a MacBook Pro with Retina. Which adapter do I purchase to connect it to a Samsung TV for the best quality?

I recently purchased a MacBook Pro with Retina. Which adapter do I purchase to connect it to a Samsung TV for the best quality? Thanks.

Doesn't matter. All HDMI cables should work, some are considered better than others, I had a $5 ebay cable work just as good as a $20 monster HDMI cable.

FCProp 6: Which setting for the best quality encoding (capture)?

Hi everybody,
i am producing contents from HDV cam (Sony Z1) and i just saw one of my colleagues (journalist too) working on Adobe Premiere having a really better final report than my one (using the same tape).
i just wonder if someone could explain what would be the best workflow to get the best quality on a standard DVD (not the next generation)?
our reports are based on Fashion, so we are using some filters for some of the images. i heared about the RS422 or something like that wich is the new aple encoder ? am i right ? is this what should be used for the capture and rendering files ?
what about the export encoding setting? movies are all under 10min duration
Thank you very much for your hightlights
Sam

I use FCPX/iDVD regularly to make DVDs. Workflow is to edit 1080i project in FCPX, add chapter markers, and export video using Share -> Master File (default) with no changes.
The resulting .mov file is then imported to iDVD with various themes, etc. and "Save as Disk Image" is used to create a burnable file for creating DVDs with Disk Utility.
Be aware that the titling of chapter markers is flaky and you may have to retitle them in iDVD as the name from FCPX is not always saved. No big deal.
I also use MPEG Streamc;ip to create a 128//720 mp4 file which goes readily into iTunes and then i synced to my iPad for portable show and tell. Have to confess that I have Compressor too, but have never used it and from following the forums get the impression that it's not easy to use. MS works fine for my limited purposes

Need serious help about understanding settings on photoshop for the best quality- please reply is you know a lot about this.

Ideally I'd like to speak to someone from the UK as I feel I can't write out everything I want to say because it's too confusing and it isn't just one question.
I need help with setting photoshop so the images are the best quality on screen and for websites and printing and how I can change that etc I've heard different things and I just need some clarification and advice.
Obviously I'm sure some of you wont want to give personal details out that's fine but I'm generally just in need of some advice, let me know if you can help:)

I don't change any settings. For 1X web images I always use Save for Web. PS remembers which web settings you used the last time. This doesn't effect other files or formats.
Image optimization — Web Fundamentals
Improving Images for Hi-Res Retina Displays
A guide for creating a better retina web - Ivo Mynttinen / User Interface Designer
Serving Hi-Res images only to High Density Displays with PHP
Retina Images
Seriously, you can drive yourself crazy with all this Retina display stuff. I don't see much upside to it except for very special situations.
Nancy O.

What do I need for the best quality external display?

Greetings all,
I purchased the Intel i5 15inch Macbook Pro around July this year and I am wanting to use my external ldc monitor, which happens to be a Samsung Syncmaster 226cw, to act as my main display for the system. I tried asking an individual at Best Buy what would be the best quality way to ensure that my Macbook Pro will effectively use my monitor's native max resolution of 1680x1050, and he seemed rather clueless. So here I am. I know there are a lot of other users who have a lot of experience with this sort of thing and I'm placing myself in your hands for help and guidance.
If it helps, here is the factory description of my monitor I am wanting to use:
http://www.samsung.com/sg/consumer/pc-peripherals-printer/monitor/lcd-monitor/LS 22MEXSFV/XSS/index.idx?pagetype=prd_detail&tab=specification
If anyone can point me into the right direction I'd be very appreciative!

The specs say DVI-D so your best bet is the minidisplay port to DVI adapter then the appropriate DVI-D male to male cable.
http://store.apple.com/au/product/MB570Z/A (the adapter)
http://www.belkin.com/IWCatProductPage.process?Product_Id=363050 (the cable)
Note your display is only 1050 high so you wont get a full HD image - my LCD HD monitor (BenQ 24") is 1920 x 1080 pixels which is "full size".

What's the best quality export for a 720 X 480 size, 24fps mp4 file?

Whats the best quality export for a 720 X 480 size, 24fps mp4 file?
This movie trailer will be sent to a distributer overseas.
The export I been resorting to lately is MPEG 2 DV High Quality as oppose to anything HDTV because it just shrinks the picture, obviously lol
Do I have anymore options besides Mpeg 2: NTSC DV High Quality?

Lagarith is a codec that you install separately. A very brief Search would have given you that info.
You can access the Lagarith option (once installed) using the Microsoft AVI format, and selecting Lagarith under Video Codec in the Video tab.

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef

I have a 5minute video in iMovie'11. I need to export in the highest quality for projection in a cinema theatre. Please advise as to best setting to accomplish this.

I have a 5minute video in iMovie'11.
I need to export in the highest quality for projection in a cinema theatre.
Please advise as to best setting to accomplish this.

If it looks good on your tv it will look good at the cinema.
The resolution will still be 720x480/576 if a dvd player is hooked up to the projector.

NEED THE BEST QUALITY QUICKTIME MOVIE FOR DVD! THANKS FOR ANY ADVICE.

I just finished a three minute piece that will be shown on DVD and projected to a sixteen foot screen. I usually just output a self-contained quicktime movie with current settings and then compress with bitvice. While I'm happy with those results, because of the size of this screening, I'm curious whether there might be better options for output to quicktime, such as uncompressed, etc?
I've also heard that I could output as a Jpeg, or a PNG file, but I'd love some advice on what works best and the workflow, as I need to get this done fast and can't really afford the time to experiment.
Any advice would be HUGELY appreciated. THANKS1

I usually just output a self-contained quicktime movie with current settings and then compress with bitvice.
That will provide the best quality ... the quality won't improve over what you had in FCP. Depending on your source media type(s), you may have had a better quality export IF you had edited and rendered with another setting.
-DH

To get the best Quality for YouTube?

Hi there.
I have a question.
Which settings do I have to have in the media encoder in pro cs3, to get the best quality in a YouTube video?

I found this discussion from almost a year ago:
Drogba, "My YouTube video looks blurry using Adobe Media Encoder" #, 20 Oct 2007 10:32 am
...but the suggestions discussed there didn't help me, so I'm hoping someone reading this thread has other ideas. YouTube's PixelDestroyer® and VideoFracker® technology does an effective job of making my good footage look like it was shot through a thin film of mashed potatoes.
The H.264 codec seems to have ruination as its primary purpose. And the iPod and flv settings aren't much better. Heck, even if I export to mpeg (either keeping the native 720 x 480 resolution or shrinking to 320 x 240) my produced mpegs look great -- but once YouTube gets hold of them, they look like
dreck.
Sure, Vimeo or WhateverOtherTube service may have better quality, but when someone wants to search for a video, there's only one site that anyone thinks of going to. That's why Google bought them.

Import/Export to retain best quality for a Beginner

Hi,
I'm hoping someone could help me retain the best quality possible for my video while working on projects because whatever I'm doing now is not working.
I shoot with a Sony HDR-FX1000 in HDV 1080i/24p and the picture and quality is amazing when plugged into a TV or played back on the camera LCD screen. I use a new iMac 2.7GHz Intel Core i5, Mac OS X 10.7.4 to edit. However, when I import into my new FCP X it is not as crisp and quality, and then when I export, it is definitely not the quality I imagined. The video loses it's sharpness and it gets very noisy plus fuzzy lines appear in some areas of shots. These lines don't show up when I view my edited footage in the timeline, only after exporting. I'm fairly new to this all and know I'm not using the best settings to retain the most quality because the beginning and end quality look very different.
I don't do heavy duty editing or effects at the moment. Basic color correction, slow-motion, preset effects, transitions, music and titles.
ANY help relating to what my settings should be across the board to retain the best image possible is greatly appreciated. I can't seem to figure it out with trial and error anymore and thought I'd turn to the experts for help.
Thanks!
Smalls

I've set the viewer to both fields. I guess I don't know why I was transcoding. I thought it somehow optimized the video. Could part of the reason the quality drops be because I transcoded the video when I didn't need to?
When I export, these are the settings I use and then export to QuickTime.
Here is an example of the noise and lines that show up after exporting the video.
It's not like this in the viewer while editing EXCEPT when I change playback quality to High Quality. Any idea why?
Also, these are my settings when importing the video. What should be changed other than deselected the Transcoding options?
I really appreciate the input. Thanks!

What is the Best Quality Export??

Hi. I am editing a documentary, and i need to know what is the *BEST QUALITY export for my movie out of Final Cut Pro (6.0.2)*. All the video was f*ilmed using the Canon XL1S*. When i export and burn to DVD the image looks a bit fuzzy. I don't know if it is some how compressed, but *it does not look as "crisp" or sharp as the original image recorded onto the Mini DV*. I have been exporting test using the *"Current Settings" of the timeline wich i believe is the DV NTSC 48 kHz* setting. *Please Help!!!*

Shane's Stock Answer #3: How to output lossless Quicktime movies
To export your project so there is no loss in quality, simply go to the File Menu and select EXPORT>QUICKTIME MOVIE. Not Quicktime Conversion, fot this will compress the footage. Make sure the settings match your timeline settings, make it self contained, do NOT recompress the footage, and you are set.
I believe that you are doing it right. Now, to get that into DVD SP the best way possible, you have to use Compressor and the BEST QUALITY presets. Take THOSE resulting files into DVD SP.
Shane

How to export the best quality file from FCE?

Hi people. I was wondering which is the option that I have to choose to get the best quality on an exported file from FCE4. The best quality I get is from the "Export - Quicktime movie..." option, but there is a huge compression as I see. The final product isn't as good as it should. Obviously, it won't be the same as the original material, but I was wondering if there was another way of getting a movie with much more quality, like when you use "Compressor" from the Final Cut Studio. Thanks in advance.

I imported the material through firewire (it was recorded on a miniDV tape). I respected the format of the source and the files I got are top notch. The final movie looks great on the computer, the differences come when burning it to a DVD. I'm using IDVD, and the .mov file exported through the option I mentioned.
I want to burn that .mov file to a DVD, which means there will be another compression to MPEG2 once I burn it through the DVD authoring app, but the product has some kind of "shaking" in the dark areas. It's not so bad, but I would like to get the best quality, like the ones I've got from Compressor. Is it possible using the Export - Quicktime movie option?

The best Quality for HTPC

Hello from Spain:
I am looking for the best MSI card to reproduce DVD. Is very important for me the quality 2D and the quality TV Out. For example: is better the RX9800 pro or the fx5900xt?
thanks for your advice, and sorry for my english!
AMD xp 2800@3000
Gygabite GA 7n400pro2
Two SATA seagate barracuda 80 G
1 Gig Twinmos memory
Antec Truepower 480

You'll get an extensive comparison of the AAC and MP3 formats and bit rates benchmarked against CD format at this link: Planet of Sound - Quality of AAC audio and MP3

Exporting for the best quality

Similar Messages

Maybe you are looking for