EXporting for Windows Quicktime

Hello,
I made a video on Final Cut Pro 6 on a mac and exported it, (file - export _quicktime).
This will play back on my mac but have tried it in several pc's that have the newest version of Quicktime and it will play the audio, but no video. Same when trying to play it using Windows Media Player.
The settings I used on final cut were
1440 x 1080
16 x 9 anamorphic
Can anyone help me please?

Your file is probably an HDV codec and the PCs do not have it.
Use Compressor to generate an H.264 version. It will playable by Windows Quicktime.
x

Similar Messages

  • Exporting for Windows Media Player?

    I work on a Mac and am switching from FCP. In FCP the option was to export as QT or h.264. I'm noticing in CS5.5 on a Mac that there is no .WMV option.
    1. Is .WMV not used anymore?
    2. What is the best format to export for Windows users?
    Thanks.

    Hi Jim,
    post your exact export options (screen capture of the AME gui video,audio & multiplexer tabs will suffice) - I'll have a look for you.
    MP4[h.264 + pcm] or MP4[h.264 + aac] etc should absolutely play on Windows 7 (and Vista?). Now if it's Windows XP then yes I don't think h.264 is supported as a video codec and it also doesn't understand the MP4 container.
    !tip! if you bring up WMP->Help->About then click on the bottom "Technical Support Information" you'll get a page showing all the codecs WMP has to work with.
    eg here is my virgin work computer (windows 7) that plays mp4[h.264] just fine...
    Video Codecs
    Type
    Name
    Format
    Binary
    Version
    ICM
    Microsoft RLE
    MRLE
    msrle32.dll
    6.1.7601.17514
    ICM
    Microsoft Video 1
    MSVC
    msvidc32.dll
    6.1.7601.17514
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.1.7601.17514
    ICM
    Intel IYUV codec
    IYUV
    iyuv_32.dll
    6.1.7601.17514
    ICM
    Toshiba YUV Codec
    Y411
    tsbyuv.dll
    6.1.7601.17514
    ICM
    Cinepak Codec by Radius
    cvid
    iccvid.dll
    1.10.0.13
    DMO
    Mpeg4s Decoder DMO
    mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
    mp4sdecd.dll
    6.1.7600.16385
    DMO
    WMV Screen decoder DMO
    MSS1, MSS2
    wmvsdecd.dll
    6.1.7601.17514
    DMO
    WMVideo Decoder DMO
    WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
    wmvdecod.dll
    6.1.7601.17514
    DMO
    Mpeg43 Decoder DMO
    mp43, MP43
    mp43decd.dll
    6.1.7600.16385
    DMO
    Mpeg4 Decoder DMO
    MPG4, mpg4, mp42, MP42
    mpg4decd.dll
    6.1.7600.16385

  • ITunes for Windows, QuickTime, and Apple Application Support

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    *The relationship between iTunes for Windows and QuickTime for Windows*
    Conceptually, you don't go too far wrong thinking of iTunes for Windows as a gigantic QuickTime for Windows plug-in. QuickTime for Windows provides the audio and video playback capabilities for iTunes for Windows, the codecs iTunes for Windows uses for importing and burning CDs, and so forth.
    So, under normal circumstances, if you uninstall your QuickTime for Windows your iTunes for Windows will no longer launch. The exception is if you install a different application such as QuickTime Alternaltive, which also provides QuickTime playback capabilities. However, most such applications (QuickTime Alternative being a good example) are themselves built from actual QuickTime program files. So there's really no getting away from the requirement to have QuickTime for Windows componentry installed on your computer in order to get your iTunes for Windows to launch and run.
    In addition to needing some QuickTime for Windows installed on the computer for iTunes for Windows, a given iTunes for Windows version will require *at mininum a particular version* of QuickTime for Windows to be installed on the computer in order for that iTunes for Windows version to run. For example, iTunes for Windows 5.0.0.35 requires at least a release version of QuickTime for Windows 7.0.2 to run correctly, iTunes for Windows 6.0.0.18 requires at least a QuickTime for Windows 7.0.3, and so on. The same applies for solutions involving other programs like QuickTime Alternative. An iTunes for Windows 6.0.0.18 would require an installed version of QuickTime Alternative to made from (at least) QuickTime for Windows 7.0.3 componentry in order for iTunes to run.
    The most straightforward way to go about getting your iTunes for Windows launching again after you've uninstalled your QuickTime for Windows is simply to reinstall QuickTime for Windows. You can get the latest version of QuickTime for Windows XP, Windows Vista and Windows 7 from the following download page at the Apple website. (Use the download link that doesn't mention iTunes.)
    [Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
    *The relationship between iTunes and Apple Application Support*
    iTunes for Windows uses a number of the same program files as other Apple software for Windows (most notably, QuickTime for Windows and Safari for Windows). Starting with iTunes for Windows version 9.0.0, QuickTime for Windows version 7.6.4, and Safari for Windows 4.0.4, program files common to more than one of the programs have been stored in a single location: "Apple Application Support".
    So, if you uninstall your Apple Application Support (using the Add or Remove programs control panel in Windows XP, or using Programs and Features in Windows Vista or Windows 7), your iTunes for Windows 9.0.0 (or higher version) will no longer launch ... because several essential program files for iTunes for Windows 9.0.0 (or higher version) will have been uninstalled.
    At the time of writing this user tip, Apple Application Support is not available as a "standalone" download from Apple. It is only available as part of the installer bundles for the most recent versions of iTunes for Windows, Safari for Windows and QuickTime for Windows. So if you have uninstalled your Apple Application Support and your iTunes for Windows 9.0.0 (or higher version) is no longer launching, the most straightforward way of getting your iTunes for Windows launching again is to uninstall your existing version of iTunes for Windows and reinstall the latest version of iTunes for Windows. (The iTunes reinstall should also reinstall your Apple Application Support.)
    [Latest iTunes for Windows version|http://www.apple.com/itunes/download>
    If, however, you've uninstalled both your Apple Application Support and your QuickTime for Windows, the most straightforward way of getting them both reinstalled is to download the latest QuickTime for Windows installer from the Apple website. (Use the download link that doesn't mention iTunes.)
    [Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
    This is the 1st version of this tip. It was submitted on March 7, 2010 by b noir.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • FCP Uncompressed 4:2:2 Codec for Windows QuickTime

    A client of ours can't play movies rendered in Final Cut Pro Uncompressed 10-Bit 4:2:2 on his Windows Vista 64-Bit PC. I have not been able to find out if there is a Windows QuickTime plug-in that will allow him to play these files (as there is for Macs without a FCP install).
    Is there such a thing? Or will these files only play on a Mac?
    Thanks!

    See if these are of any help
    http://wiki.multimedia.cx/index.php?title=SheerVideo
    http://www.bitjazz.com/en/products/sheervideo/

  • Exporting for Windows Media Player/MPEG (help in translating mixed message)

    So a client of mine had an unusual request today. He's been asked by some tech folk who are doing 'commercials' in the theater lobby to provide them with clips with these specifications (and I use that term loosely):
    MPEG files that are non-compressed and play in Windows Media Player (no Quicktime allowed) and are Audio Enhanced. Needs to be burned on a CD not a DVD.
    Yeah, sounds like folk who have no clue as to what they want and are trying to pretend they do to me too
    So...any ideas on what they really want? And is it best to export via Compressor or invest in that Flip4Mac?
    I'm probably going to get a phone call from the tech folk on Monday and want to be a bit forearmed w/some idea of what the heck they REALLY mean!

    Yup, that's why I'm so perplexed by their specs. Kinda like asking me to make a Photoshop picture that's bright and and can be printed big
    Since I don't ever deal w/WMP (shudder) was wondering if their gobbledeegook actually made sense in another realm (glad to hear it doesn't seem to).

  • Itunes help for Windows (Quicktime 7.1.3)

    Hey all! I have been using iTunes for a while and have collected a big collection over the years.... When i was asked to download the new version of iTunes (Not 7 i think but a newer one) i acepted as i usually so. The installation did what it needed to do and i rebooted. When i went to play iTunes it told me i had an older version of Quicktime and i needed to update. I went to the iTunes website to see what i could do, found Quicktime (standalone) and downloaded it. Of course, it still dosent work . Does anyone have any ideas or has gone through the same thing? Thanks so much for any help!
    By the way I'm not that great with computer talk so if you guys can dum it down for me that would be great

    okay ... with the bug fixes in itunes 7.0.1.8, your installer may be interpreting the version of QuickTime 7.1.3 that came with that as a newer version than the standalone QT 7.1.3 (hence the message you're getting with the standalone QT installer.)
    let's try an alternate technique to get a new quicktime in your PC.
    go to your Add/Remove programs, select QuickTime, and select "remove".
    then manually clear away any leftover QuickTime program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    now we'll do a repair install of itunes. go back to Add/Remove programs. select itunes, and click "change". select "repair".
    the repair install of itunes should reinstall the correct version of QuickTime. restart the PC, and try launching itunes again. do you still get the message about QuickTime?

  • Export for Windows media player

    What is the safest codec to export a video to be shown on a PC with Windows Media Player?  I have Compressor and Adobe's Media Encoder s well as Mpeg Streamclip on my Mac.
    Thanks.

    pcalvin wrote:
    I have AME, but it doesn't list a WMV codec. 
    Sorry, my mistake .... WMV through AME is Windows only. You will need Flip4Mac to output WMV.

  • Re: iTunes for Windows, QuickTime, and Apple Application Support

    This tip is ready for consideration.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Moderator: A FAQ for Windows Compatibility forum?

    Would it be possible to do a FAQ section in the Windows Compatibility forum <http://discussions.apple.com/forum.jspa?forumID=687>? Many of the same topics are being asked repeatedly and I feel a FAQ could address most of the similar topics.
    I suggest the following as topics for the FAQs:
    1. Microsoft Office questions. These are not relevant to Mac and Windows compatibility and are more appropriately posted in Microsoft's discussion forums.
    2. Boot Camp questions should be directed to the Boot Camp forum and Parallels questions should be directed to <http://fourms.parallels.com>.
    3. The need for antivirus software for Windows when it is running on a Mac.
    4. A list of links detailing how to print from a Mac to a Windows-connected printer and vice versa.
    bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

    Thanks for your replies Ardian and Hardy! I'm glad to see at least the idea is supported by a few others. Maybe it will catch on.
    What I find interesting is that the Windows Compatibility forum has become the dumping ground for all the "Windows" questions that don't seem to fit in the forums listed before it. You'll notice on the Forum Home page that it's at the end of the Windows Compatible Technology list. I'm sure folks are ruling out the more specific technologies such as iPod, iTunes, QuickTime, etc., and posting there when they don't know where else to post.
    Windows Compatible Technology
    AirPort & AirPort Express for Windows
    Bonjour for Windows
    Boot Camp Public Beta
    iPod
    iTunes for Windows
    QuickTime for Windows
    Windows Compatibility
    Even a general FAQ link below or to the right of the the section title would be a helpful guide for folks.
    I'm frustrated that more than 50% of my questions seem to be telling first time posters why their questions aren't approrpriate for the forum and which forums they should be using.
    bill

  • Windows Quicktime Pro problems - no video screens [under "file"]

    I have downloaded and installed Quicktime Pro and keyed in correct registration codes. [Quicktime 7 Pro is displayed] When in Apple Quicktime Pro- I am unable to see any kind of video screen data under "file" - Audio info is there [New audio recording]- but no video screens of any kind. I thought that maybe Quicktime Pro could not recognize my web camera [Panasonic]
    I have tried: switching firewire cards[3 others] and switched around quicktime preferences ie - Video to Safe mode/Direct X - still no change.
    When I connect camera, Digital Video device on computer acknowledges that there is a camera and gives me 4-5 software choices ie - Adobe, Windows Media Player but Quicktime Pro is not one of them.
    Help ! - Any suggestions would be appreciated.
    thanks

    ALso "You can do all of that — and much more — with QuickTime 7 Pro. Available for Windows, QuickTime 7 Pro offers a perfect solution for anyone who enjoys watching, recording, creating or sharing high-quality multimedia.
    Multimedia Heaven
    Just about anyone who wields a videocamera, takes digital photographs or wants to share those precious videos or photos with friends can benefit. Even those who simply like to watch movies or movie trailers in full screen and save their favorite movies for viewing later will enjoy using QuickTime 7 Pro. If you want to create a true multimedia experience on your website, you won’t find a tool that’s easier to use or less expensive.
    Astounding New Codec
    And as a powerful application ideal for creating high-quality audio and video content, QuickTime 7 Pro lets you create H.264 video, capture audio, create multi-channel audio and compress a file as you continue to playback or edit another video.

  • Minimum version of QuickTime for Windows for Manual Advance QT exports?

    My wife is giving a presentation on Friday and must present on a Windows machine. Her presentation includes a dozen short, embedded video clips, so the only trustworthy way to not completely ruin the flow of the presentation is to export the Keynote to Quicktime.
    No fancy builds or transitions, just standard dissolves and the previously mentioned embedded videos.
    I'm wondering what the lowest version of QuickTime Player for Windows is that will play a manual advance .mov file exported from Keynote '09.
    Thanks.

    The computer should be able to play that file with QT, what happens when you try to open it?
    Here is a sample of H.264 you can test on the computer
    http://support.apple.com/kb/HT1425
    I was able to play this with a 2.4 GHz Intel pentium 4 cpu with 512 ram, I have a computer with 1.8 Intel pentium 4 with 512 ram, I can try it on

  • No sound when I export my movies with QuickTime for windows.

    Using QuickTime Pro for windows and getting no sound on my exported movies. Won't even give me the option of adjusting the sound on options then movie settings. Any ideas? Thanks...

    QuickTime Pro can't extract audio from muxed file formats (MPEG 1 or 2 and Flash).
    MPEG Streamclip (free) can.

  • Quicktime export not available for Windows 8?

    Hello,
    I have imported .mov footage from my Canon 60D into a Premiere project and edited it on the timeline. It plays fine in Premiere. I would like to export it in the same format. I go File -> Export -> Media and in the format dropdown "Quicktime" or "MOV" are not available.
    I tried installing Quicktime from the Apple site, it didn't affect the export setting in Premiere. The version of Quicktime I installed was an x86 for Windows 7 version, I could not find a 64bit or Windows 8 version.
    I am on Windows 8 64 bit with CS6 Master Collection.
    Does anyone know how I get Quicktime into my export format options?

    You're honestly better off not using QT.
    What is the basis and  foundation of this comment ?
    (apart from personal bias of course)
    We have never had any issues in using QT in a cross platform, cross facilty workflow.
    My peers and colleagues agree.
    Thing is Jim..if one works within a cross platform, cross facilty workflow...one often runs into QT. eg Uncompressed .mov (8, 10, 16 bit)  required. Not AVI or H264!.
    They wont change setups based on Jim Simons humble opinion on all things Apple.

  • FCP 5 export to .AVI for Windows client? Advice needed!

    I have a Windows platform client that wants my Exported FCP 5 Sequence in .AVI format.
    Obviously, I normally always use Export to Quicktime Movie in FCP, and I do know that their is not a direct choice in FCP to export/convert as an .AVI file. (I usually hand off the FCP file to another facility that does DVD Studio Pro authoring work, and haven't had a need to make different file formats).
    This has made me to ponder of few bits of info, that I'm sure I could get great ansers to, here.
    My normal "workaround" for making an .AVI for a Windows user is to Export as Quicktime Movie in FCP, like normal, and then open that exported file in Quicktime Pro, and use Export Movie to AVI in Quicktime Pro. Is this the best method? Secondly, I am a little unsure as to the best settings I should use in QT Pro to achieve this. For example:
    I just did a routine NTSC 48k,16 bit stereo, 30 second ad in FCP, and my normal, Export to Quicktime Movie was about 260 meg in size for the finished, self-contained movie file.
    I opened this in QT-Pro and ran Export to AVI. In the settings dialog, I chose "uncompressed" for video and 48k-16 bit stereo for audio. The resulting export was about 680 meg in size! Because of file size restrictions for the clients product, what settings change or choice should I be making in QT-Pro to get an "equivalent" of the 260 meg file the FCP is exporting? Should I not get an equal file size of the QT-Pro AVI versus the FCP export (both 260 meg?).
    If the answer is compression, what is the best settings in QT-Pro? Cinepak? Intel Indeo?
    Perhaps, I have always misunderstood what FCP Export to Movie is giving me, but I thought that was uncompressed video? If so, why do I get the 260 meg out of FCP, and then 680 meg from QT-Pro Export to AVI (uncompressed) for the same 30 second clip? Is it simply a data rate difference?
    Lastly, I have actually had a Windows user take a FCP Export to Movie file, straight from me, and they say it opened fine in Windows Media Player as is for viewing. However, there is no (dot) file extension name on the end of the filename. They can simply click File/Open in Windows Media Player and choose the "unrecognized" file because of no extension, and play it just fine to at least view the clip.
    So what exactly is the file type that FCP is creating? It's not a .MOV and not an AVI file. What would be the equivalent file type association (just for my curiosity).
    Thanks for any help to the above as I value the more-experienced users here.
    Wade

    Hi Wade,
    Sorry for letting your post unanswered for two days, we were all busy (I know, it is not an excuse).
    Seriously, I think the reason you are not getting answers is you have asked too many questions in one post. Don't know about others, but I get slightly confused.
    Let me tell you what I do with FCP material when I send it to our sound department where they work with Nuendo on PCs. I export sequence using QT Conversion. My settings are: Format - AVI, Compression type - DV-PAL, Compressor quality - Best. I do not bother much about the sound. I sent the resulting file over network to a Maxtor FireWire external drive connected to a colleague's PC and then take the drive down to the sound guys. If the AVI file is smaller than 2 GB I can burn it to a DVD and a PC can open it, if it is larger, PCs cannot open. Also, the sound guys ask me not to use Cinepac, they do not like it. Therefore, I use DV-PAL; I guess you may safely use DV-NTSC but it depends on who will open the AVI file. Ask your client what it wants.
    I think my routine is a bit more streamlined than yours - I export straight from FCP and do not bother with QT. You are wrong in saying that there is no direct way in FCP to export AVI.
    Hope this is a starter for more answers. Also, have you tried searching the forum? I am sure all the answers are already there.

  • EXPORT LONG FILES IN 1080p for Windows Media Player

    Hello, need some help in exporting and encoding some large files from Premiere CS6.
    We have 4 Sequences, each totalling 45minutes in length and in 1080p (ProRes422).
    We need to export and encode for Windows Media Player as quickly as possible.
    Looks like each export is going to take over an hour from Premiere as "Match Sequence Settings"
    -keep in mind there is NO AUDIO.
    Once it's out of Premiere as an MPEG, I can transcode to any format. Ultimately WMV would be optimal,
    but we need to transcode the MPEG into a MOV file before 'Episode' will accept it, just to make the WMV files.
    Target files: (4) 1080p Windows Media Player compatible files
    Does anyone have a better workflow workaround? Midnight hour and need help!
    Thanks in advance,
    Dan

    Thanks Jim, I can't export to WMV out of Premiere or Media Encoder. I use Episode to make my WMV files, and since Episode doesn't take MPEG in from Premiere (sigh)
    I have to first make them in Quicktimes..
    But yes! Anything Windows Media Player can handle... should I just go with the 5GB MPG files? No way for me to test, I'm on a Mac and these are playing on a PC
    thanks for your help

Maybe you are looking for