Exporting from FCP to Compressor 3

We just upgraded to the new version of FCP and compressor 3 which we use for exporting mpegs.
The way we used to export mepgs was though the "Export using compressor" function in FCP.
We would be able to export multiple clips to compressor and then hit submit meaning that we could create multiple mpegs easily.
When I try this in Compressor 3 it allocated each exported clip to a new tab (or new batch) and not to the same tab so i have to hit submit, wait for the it to finish and then hit submit again for the next clip/batch.
Does anyone have any idea how to get the newly exported clips to all be within the one tab/batch?

Thanks for the suggestion, doing it that way does make them all appear in the same batch. problem is that when I create a sub clip I loose in the in and out points of the clip so I have to go into each subclip set the in and out points again and then export the subclips to compressor. When i have to export 10 individual 30 second mpegs it's going take make the process a lot more complicated then it was with the old version of compressor. I will keep playing with it, seems like others are having similer issues http://discussions.apple.com/thread.jspa?threadID=1256649&tstart=1277

Similar Messages

  • Problem exporting from FCP using compressor

    Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
    Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
    My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
    Hope this helps anyone else in similar situations
    Martin
    G5 PPC   Mac OS X (10.4.8)   FCP 512 post production

    Hi:
    How long is your movie?
    The best workflow is FCP > Compressor > DVDSP.
    You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
    Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
    Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
    To give you detailed info about what encoding settings to use you must post some info about your FCP project.
    Hope that helps !
      Alberto

  • Exporting from FCP to Compressor, FCP causes crashes

    When I export a particular FCP sequence to Compressor (with the intention of then moving on to DVD Studio Pro with the resultant compressed video and audio file)on first gesture to export I receive a message saying one render file is missing. However, when I was in FCP before launching Compressor, the sequence showed nothing that needed rendering. When I "render both" from the sequence menu, there is nothing to render. When I watch the sequence in FCP it views perfectly. Then I export using compressor. I receive the message that a render file is missing. I tell the system to continue without this one render file since I have no evidence that the file is missing. I then set off the compressor work, and it grinds away. Ultimately sometime in the two plus hour processing period (the sequence is 8 minutes long) FCP generates an error and Compressor aborts its work, blaming FCP. Any idea what the problem is and how to fix it? Please let me know if you need further info. As always, I am up against a deadline with this final output. The behavior is one I have never seen before in the four years I have been using this software. Thanks in advance.

    Do you have motion files on the time line - a Google search shows posts about this problem:
    http://forums.creativecow.net/readpost/8/1013775
    http://discussions.apple.com/thread.jspa?threadID=1460437
    I would export a Quicktime Movie from your timeline File > Export > Quicktime Movie using current settings, then take that exported Quicktime Movie into compressor as opposed to trying to go direct from the FCP timeline.
    Also, is you timeline fully rendered? Have you placed a checkmark on every Render condition -
    !http://www.spotsbeforeyoureyes.com/RenderMarksChecked.jpg!
    and then clicked on the timeline, typed Command + A to select all then Command + R to render the whole timeline?
    Hope this helps.

  • Export From FCP to Compressor adds a Frame to Clip

    When I export a sequence from FCP 5.04 all my chapter points are off 1 frame in Compressor 2.01. For some reason it seems to be adding a black frame at the front of the sequence pushing the sequence down the timeline and off setting all the chapter points. It is happening to other sequences as well, it's not project or sequence specific.
    This is Weird. I think it started 2 weeks ago. It might be related to the 7.1 Quicktime upgrade. I just upgraded to 7.1.1 to see if it would solve this issue however no luck.
    Any ideas, any body else having this problem?
    Guillaume

    I have exactly the same problem : Compressor adds a white picture for some clips when I'm converting to MP4.
    How can I solve this problem?
    Thanks in advance.
    Sand

  • Steps to exporting from FCP to Compressor/DVD studio pro

    Hello,
    I have just completed editing my video and would like to know the steps to exporting my video so that I can burn it on a DVD. I need help with the steps involved in exporting my project to compressor then to DVD studio pro.
    Thank you for your help in advance!
    p.s. on a separate note: I shot in 1080i and converted my raw footage to .mov format (640 x 480) to edit. Now that I'm done with editing, is there a way to bring the quality back up to 1080i?
    Thanks!

    http://discussions.apple.com/thread.jspa?messageID=12830379&#12830379

  • Trouble Exporting From FCP to Compressor

    I attempt to export Final Cut projects to Compressor. Compressor app opens but not prepped with the FCP project like it should. All software updates are up to date and I've reinstalled FCP.

    Make sure the sequence(s) you want to send to Compressor are selected in the browser.
    Then they should show up when Compressor opens.
    If you are just sending one sequence at a time, you can also do it by making sure the timeline window with that sequence is activated, and nothing in the timeline is selected.

  • What should I use to export from FCP to DVDSP?

    I'm sorry if this question is too basic, but I've searched past discussions and read the manual, and can't seem to find the answer. I am trying to put a nearly hour-long movie I made onto a DVD, in order to have hundreds of duplicates made. I'm using DVD SP, and I had been exporting my movie from FCP to a Quicktime movie file, then importing the Quicktime file into DVD SP. Then recently I came across something online that said you should actually be exporting from FCP to Compressor, then to DVD SP. I've never used Compressor before, so I have no idea what to do, or if I even should be doing it. The video was fine when I exported to Quicktime, but I of course want to have the best video quality possible.. so if there's a way to keep the video at the highest quality possible (higher than when using Quicktime), please let me know (and if it could be explained as simple as possible, I would appreciate that).

    Hi Ryan,
    I'm relatively new to this too but you're on the right track. I would export to Compressor.
    There are various settings i.e. mpeg2 fast encode, high quality 60min, 120min, widescreen, 4:3 etc and all dependant upon what you want your end result to be.
    You'll need to choose your format - I suggest mpeg2 - 60min High Quality Encode > your destination for both the video and audio > 'submit'.
    You should end up with a file that resembles *My Movie.m2v*
    Then import that file into DVDSP into the assets pane and you're away.
    Good luck!
    -Chuck

  • Exporting from FCP and using Compressor at the same time?

    Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

    Only in FCP 7.

  • Fast Export from FCP X to Compressor?

    I've switched from FCP 7 to FCP X and one feature which frustrates me is that the export is so slow. In FCP7 I could export a sequence as a QuickTime reference file, and (provided there was no rendering do to) it was finished in seconds. Under FCPX we can no longer export as a QT reference, so there's around 40 minutes to wait - not for any rendering or heavy CPU work, but just while FCP writes an enormous file to my hard drive.
    And this is 40 minutes when I can't do any useful work with FCPX.
    Would buying Compressor save me this time? If I export from FCPX via Compressor, will it export any faster? I'm hoping that FCP will shift all the work straight to Compressor, and let Compressor do the 40 minutes writing, while FCP is left available for me to do useful work.
    Thanks in advance for any help on this one.
    MST

    Note Tom Wolsky's answer to a similar question here.
    Russ

  • Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
    Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

  • Export from FCP directly into DVD studio pro?

    Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

    You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
    Here's a tutorial:
    http://www.youtube.com/watch?v=wFgJpd7DEWw
    Message was edited by: Eric Pautsch1

  • Exporting from FCP to DVD

    Hey
    Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
    My project is no longer than 5 mins
    1920 x 1080 - 1080i (16:9)
    Field Dominance: None
    frame rate 25
    I have Final Cut Studio latest version.
    I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
    Any advise on what you think will be best would be great.
    Thanks

    Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
    In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
    In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
    Message was edited by: Dynamicworm
    Message was edited by: Dynamicworm

  • PAL files exported from FCP don't display

    This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
    Any ideas? This seems to be a new one.

    Does the computer your using to view this video have Final Cut Pro installed?

  • HELP NO Chapters from FCP and Compressor-Did the FCP markers correctly too.

    Hi Everyone,
    Having allot of good Beans with FCP.
    One problem though:
    1. Export to DVDSP4 with CHAPTER markers on my timeline and when I try to import my m2v file from Compressor its greyed out for some reason so, I drag it into DVDSP4 from finder and highlight my play button on the 1st template
    MENU: SET ASSET AND CREATE CHAPTER INDEX.
    It usually works great while it continues on but, I dont see my chapters anywhere.
    I know they are there but, someone on online here said that you dont see the chapters while in compressor (which I wish showed them in the preview windo to confirm they are there) but, have yet to see them who up in DVDSP4.
    I still think this is a FCP inquiry but, trying to forums.
    HELP<

    http://discussions.apple.com/thread.jspa?messageID=2010186&#2010186
    Has some info on Chapter Markers to help.
    Are you exporting the markers when you export from FCP? Are you adding them and making sure that they are on the timeline (not the track) in FCP? (If you open the movie in QT you should see the markers on the lower left in a crop down selector if they exported properly.)

  • Exporting from FCP to .mov - backwards compatibility

    Am working from NJ with a client in CA. She is struggling to export her FCP movies into a .mov format that will play on quicktime (specifically on OLDER versions of quicktime). I've been able to assist her in exporting to the .mov format, but it only plays in the quicktime 7 player. Most of her customers do not have that installed and thus cannot view the movie (and, they do not want to take the time to install).
    I would like to be able to walk her through the steps/settings/parameters necessary for her to export into a .mov format which will play in older quicktime players (without forcing the user to update their player).
    example of .mov: http://advertisingusa.tv/0_home/index.shtml
    many thanks in advance,
    windandkitesurfer

    Trying to export from FCP to backwards compatible .mov or .mo4 format.
    We're trying to use Sorenson 3 compression, and are able to create this but the file is created without any extension.
    We are using FCP, export using quicktime conversions, then under options->settings->compressor type = "Sorrenson Video 3"
    Still are not able to create a movie file backwards compatible. Any further assistance greatly appreciated.
    Note the time lapse between emails due to the problem of communicating coast to coast - the web developer is not the first in line for return emails
    regards
      Mac OS X (10.4.8)  

Maybe you are looking for