Exporting from FCP7 directly to compressor has a flaws while the QT is ok

The QT movie of my finished timeline it is fine. However when I compress it (highest quality) some frames don't look right, jumping or line moving through them. I have also tried to use some of the controls in compressor and it got worse.
does compressing the QT solve the problem? Or any suggestions?

Best method would be screen recording software.
I use SnapzX.

Similar Messages

  • Export from FCP directly into DVD studio pro?

    Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

    You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
    Here's a tutorial:
    http://www.youtube.com/watch?v=wFgJpd7DEWw
    Message was edited by: Eric Pautsch1

  • Exporting from FCP and using Compressor at the same time?

    Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

    Only in FCP 7.

  • Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?

    Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?
    I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps.  The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file.  How can I get the exported movie to be slowed down?

    joegez,
    There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
    Hope this solves the problem for you.

  • As with others I can't export from Lightroom 4 to Elements 10 or any of the Nik products except HDR

    As with others I can't export from Lightroom 4 to Elements 10 or any of the Nik products except HDR Efex pro. Surely this has been fixed? If not it is appalling. It has been going on for too long in a program that has supposed to have some integrity

    I am able edit pictures in PSE (Photoshop elements) 10 BUT i am unable to edit videos in PRE (premiere elements) 10. I will uninstall LR 4.1 RC1 and then install RC2 and use a backup of the catalog. Lets see if that works.

  • I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

    I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

    Does you friend use any accented letters in the descriptions?  That might cause it but I don't know for sure.
    Has he run any repair operations on his library, i.e. repairing the database file? Another possible fixe that's easy to apply is the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For  Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    The demo version of GraphicConverter can be used to view/check/edit the ITPC fields in an image file after exporting.

  • I have updated my iphone 3gs to ios 5 from 4.1 and it has locked back to the original sim card in america as i live in ireland is there any way i can unlock ios 5 or delete it off my iphone and go back to 4.1 ?

    I have   updated my iphone 3gs to ios 5 from 4.1 and it has locked back to the orginal sim card in america but as i live in ireland an american simcard wont work here is there any way i can unlock ios  5 or delete it off my iphone and go back to 4.1 so i can use my iphone ?

    It sounds like you have a hacked/unofficially unlocked iphone.  When you update, it will indeed lock it back, as it should.
    The ONLY place that can legitimately unlock an iphone is the carrier to which they are locked and no U.S. carrier does this.

  • Bought an iphone 5s from pawn shop and it has icloud lock and the device is not been blacklisted, how can i unlock it as no idea who the owner is of the device

    bought an iphone 5s from pawn shop and it has icloud lock and the device is not been blacklisted, how can i unlock it as i have no idea who the owner is of the device

    Take it back to the pawn shop and ask for your money back.
    You bought a brick.

  • I am creating a 2-volume book set.  One book has a "cover" while the other book has a"cover & flap."  How do i make them ?

    I AM CREATING A 2-VOLUME BOOK SET.  ONE VOLUME HAS A "COVER" WHILE THE OTHER HAS A "COVER & FLAP."  HOW DO I EDIT COVERS TO MAKE THEM CONSISTENT?

    To attempt a new chat session...
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    http://helpx.adobe.com/x-productkb/global/service1.html

  • Fast Export from FCP X to Compressor?

    I've switched from FCP 7 to FCP X and one feature which frustrates me is that the export is so slow. In FCP7 I could export a sequence as a QuickTime reference file, and (provided there was no rendering do to) it was finished in seconds. Under FCPX we can no longer export as a QT reference, so there's around 40 minutes to wait - not for any rendering or heavy CPU work, but just while FCP writes an enormous file to my hard drive.
    And this is 40 minutes when I can't do any useful work with FCPX.
    Would buying Compressor save me this time? If I export from FCPX via Compressor, will it export any faster? I'm hoping that FCP will shift all the work straight to Compressor, and let Compressor do the 40 minutes writing, while FCP is left available for me to do useful work.
    Thanks in advance for any help on this one.
    MST

    Note Tom Wolsky's answer to a similar question here.
    Russ

  • Need to open .fcp  project from FCP7 in FCPX 10.0.3. How can I achieve this without exporting the original from FCP7 to a QT movie? I need the original timeline in FCPX.

    I have been working on a scholarship short film for a couple of months now (am a senior in high school) and have been using my school's Mac Pros with OSX 10.7 and FCP7 to edit it. Yesterday I bought a Macbook Pro and got FCPX, and am having trouble moving everything over (the computers at school are going to be wiped for the end of the year soon and I must continue to edit it on my MacBook). The project file "MattsShort.fcp" from FCP7 at school isn't even being recognized as a project file by the newest version of FCPX, so obviously I cannot open it and get to work connecting the media. How can I open this file in FCPX? Excluding exporting the project at school to a quicktime movie, I need to be able to further edit the timeline.

    Cool, thanks! I was able to import the timeline into FCPX but all of the files are offline, even though I imported the same exact clips that were in the original FCP7 project, into the same 'event' that I have the new FCPX timeline in. I believe the problem lies in that FCPX imported the clips and named them after the date and time they were created, rather than the "Clip #XXX" that FCP7 assigned to the timeline. Does this sound correct? And if so, is the only way to solve this problem to go back to FCP7 and rename all of the clips assigned to the timeline to the names FCPX gave them? I really hope there is a simpler solution but given all of the work it takes to even import a FCP7 project into FCPX, I wouldn't be surprised if that was the only solution.
    A little more info: When I use 7toX to convert the XML file, it says that my media will be offline.
    EDIT: I just watched a youtube video that explained that 7toX brings over the required media.....why isn't it doing that for me? I am on two different computers if I hadn't already said.
    Message was edited by: MattMadoni

  • XL-H1 aspect ratio error when exporting from FCP 1080p24 to compressor

    PLEASE HELP
    I have a finished project in fcp in a 1080p24 project.
    My source footage is 1440 x 1080i 24f from an xl-h1.
    When i export from final cut pro to compressor, compressor squeezes my footage into a square.
    if i export to dvd from compressor the ratio is fine.
    when i export in quicktime thats where the skewed image happens.
    Please help
    thanks

    Hi StingoArmy,
    There is an easy fix for this. Once you export your file to Compressor, you can apply an export option, let's say we're going to export a LAN Streaming Quicktime movie for Internet. Now click on the new bar that's been placed inside your media tab. The settings for this export item appear below in the Inspector. Just below the DESCRIPTION line are a series of options buttons. Clicking the option 2nd from the right (Geometry) opens up a new tab where you can change the dimensions. There are several ways to go about exporting to 16:9, the one I use is to change the Frame Size to "Custom (16:9)", however, you can also do the same thing by changing the Pixel Aspect to "HDV 1080i (16:9)" You should test results for both and see which is the preferred method for your final output, depending on what type of Quicktime movie you are creating.

  • I cannot print wirelessly to Canon PIXMA 560 using Airport Extreme and Vista PC.  Printer worked fine with Netgear previously.  With USB from printer direct to Laptop it will print.  The printer is definitely set up correctly to acknowledge the router.  W

    When I connect the printer to the Airport via USB and run Bonjour, it recognizes that I have a Canon printer but does not have the mp560 as one of the choices.
    I spoke with Apple support but they could not help...they said they thought it was a Windows issue and that it had something to do with one of the ports needing to get "unstuck" or something like that...this is really annoying because while the Airport is so much better than the Netgear it defeats the purpose of having the wireless printer, which worked so well previously.
    Can anyone offer advice?  Thanks.

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • Insufficient privilege: Can't export objects in schema..user has no privilege on the underlying objects

    I'm using SYSTEM user but
    HDBSTUDIO continues on triggering this error when I try to export the catalog:
    SAP DBTech JDBC: [258]: insufficient privilege: Can't export objects in schema DARTEL_TRANSPORTES. Can't export procedure DARTEL_TRANSPORTES.PAL_TRIPLE_SMOOTH_WRAPPER. user has no privilege on the underlying objects
    When trying to grant the SYSTEM user to that particular object  I get a new error : Could not modify user 'SYSTEM'. Several issues occurred
    Have anyone have struggled with this error before, any help will be highly appreciated
    Kind Regards

    rev 69 too
    tomorrow I will have the webex and let you know
    Something happenned after my customer change the suse's server IP, I had to perform a re-installation of SAP Business One only
    We were supposed to install using the hostname but no one of the installers let me use the hostname
    so it Kind of forced me to use the IP.
    After asking Support about that one of the specialists told me that he prefers to use IP instead of the hostname. So I used IP.
    Maybe this changed something I cannot detect yet. but tomorrow we'll see.
    KR

  • HDV exported from FCP 7 into iDVD has red/green moire pattern?

    Yesterday I was testing some native HDV (1440 x 1080)  in FCP 7.
    I exported it as a QT Movie as I used to in the good old days but when I imported it into iDVD the image was coverd with a greeny-red moire type pattern.
    It wasn't a serious problem as I simply re-exported as ProRes and that cured it.
    However, I am curious as to what may have caused it as it never occurred in the dim and distant past.

    Thanks for testing and confirming my findings Russ.
    I didn't get this problem back in 2008 as native HDV, FCP and iDVD worked OK together  .  .  .  at least in that respect.
    However, in those days I was using FCP 6 and I wasn't using OS X 10.6.8 or later. So maybe there has been a change in FCP 7 or the OS that has caused the problem.
    OK, long answer to Michael as to why I was doing this "test".
    Back in 2008 I bought a new iMac and a Canon HV20 HDV camera expecting to see a dramatic improvement in image quality  .  .  .  .  which I did  .  .  .  .  on the computer .
    I hadn't mastered DVDSP and Compressor and preferred to use my familiar iDVD which did everything I needed.
    So I plonked my edited footage in iDVD and burned a standard def DVD.
    I was horrified to find that the DVD footage shimmered badly where any straight lines or fine detail appeared but even worse was the appalling judder that occurred with any subject or camera movement.
    I spent several weeks investigating and testing, deinterlacing, swopping fields, converting to AIC and ProRes  etc. etc. to no avail. (Incidentally if I set my camera to downconvert to DV during capture, the DVDs produced were fine, but I wanted to edit those beautifully detailed HDV images not DV ones).
    Finally a suggestion from Tom Wolsky solved the problem  .  .  .  .  .  put the finished edited project in a DV-PAL  sequence in FCP and render it.
    The result was rock solid images and beatiful smooth  motion.
    However, the downside was the time it took to render the HDV project to DV which I found unacceptable.
    So I gritted my teeth and taught myself to use DVDSP which got rid of the problem of instability but introduced other, admittedly lesser, but well documented problems. But that's another story.
    Now we come to the present.
    Last year I bought a Panasonic SD800 3 MOS AVCHD camera, edited in FCP X and exported either to AVCHD Discs or standard DVD.
    A few weeks ago I was showing a friend how to use iDVD and the only footage available was my AVCHD stuff.
    I used it, expecting the same (or even worse) instability as I had found with HDV.
    To my pleasant surprise, the resulting DVD was acceptably stable with smooth motion.
    So a couple of  days ago I started wondering whether HDV in FCP X and iDVD would be OK.
    It was, which meant I could go back to iDVD occasionally when I wanted one of its custom canned menus.
    Then I wondered what HDV in FCP 7 sent to iDVD would produce.
    Hence my recent test!
    I bet you wished you had never asked, Michael. 

Maybe you are looking for

  • IPod Radio Issues

    I have the latest iPod software on my 30GB video, but I do not have the radio...I go into settings > main menu > Radio > on but it does not show up in the menu, and I can't access it. I have reset and restored my iPod however it still won't show up.

  • Business Catalyst not fulling uploading site when trying to publish ???

    Can anyone help me please. I am trying to update some changes to a site I am creating but for some reason it keeps stopping upload at 76% upload when trying to publish. I have shut the program down, restarted my mac, logged in and out and in again to

  • Can't install email on new phone, its asking for port and things like kind of account this is POP3?

    when I go to add an account it only gives me options of FB, twitter, google, Samsung Microsoft exchange. If I go into 'email' it asks for POP3 server and port. I don't understand these things, would like to get emails on my phone.

  • Artist photo missing from some artists

    I recently realized that the music artists on my iPhone(5s) have pictures of themselves. But not all of them. Sometimes, at first they don't have a picture (it just shows the album artwork) but it appears after some time. What should I do if I want a

  • Restoring from back up

    if i have a copy of an old back up file from the mobilesync file in my computer, could i delete the one that is in the file now and replace with an old one to restore from?