Exporting from Live type as uncompressed

Does anyone know if it is possible to export from live type with no compression or in different codecs? I have this option in FCP and AE and my graphics and type look great when export using "none" compression or 10 bit uncompressed.

The default render from LT uses Animation codec which is completely lossless.
bogiesan

Similar Messages

Exporting video clip from FCE4 to Live Type.

What is the correct way to save a video clip when exporting into Live Type so that you can access Live Type and place video clip in background to begin working?
Thanks.

Find the frame that you want on your Timeline. Press I and then O to mark in and out on the same frame. Go to the FCE menu bar: File > Export > Using QuickTime Conversion.
Click the Format button and choose Still Image.
Click the Options button. In the new window that appears, click its Format button. Choose TIFF.
Give the file a name and a save destination.
In LiveType, make sure that it's Project Properties (Edit menu) are set to match the codec used in FCE's Sequence setting.
Go to File > Place (not Place Background Movie, that no longer applies). Choose the image that you just saved.
You might have to make some adjustments to the image depending on the codec you are using in FCE. Post again with that information please.

Live Type How do you get a transparent background?

Im trying to create just text for FCP using Live Type, but no matter what I do when I export the Live Type movie, Its exporting with a black background. I went into the settings and changed everything around and tried everything. Opacity levels, render background, etc.. I either get the color I choose or black when it should be transparent. I know there has to be a way to just creat text with no background. Much help needed!

When you render your movie, make sure you don't have the "render background" box checked.
Once your movie is rendered it is displayed with text over a black backgournd but rest assured when you put your rendered .mov text into Final Cut it will have an alpha channel and not a black background.

FCE shuts down when I import Live Type

I have imported titles from Live Type into Final Cut Express before and have never had a problem until now. I recently purchased Jaguar and successfully downloaded the software, but since I've done that, when I import a title from Live Type, FCE shuts down. I'm not sure if Jaguar has anything to do with it, but that's when it started happening. Can someone help me out?

Look at this link below:
http://discussions.apple.com/search.jspa?threadID=&q=7.3+FCP&objID=c123&dateRang e=last90days&userID=&numResults=15&rankBy=10001

Transitions wont place on Live type files

I have imported a set of basic titles from Live Type in to FCP HD 4.5 and placed them in the timeline above the movie clips which are 4.3 PAL.
When i go to place the transition which is a simple cross dissolve the transition will only get placed at the beginning of the next text clip and not in the middle as i want and is only 1 frame long.
I have tried it with a lower third text from within FCp and it works fine.
I have tried the usual stuff but can't seem to sort it i may be missing something simple but it all looks ok to me.
Any help would be much appreciated.
Kev

"The only thing i didn't do was to render the clips in Live Type as i wanted to do this in FCP in case i needed to adjust the clip. Would this make any difference? "
No... it won't make a difference. You're importing the .ipr file into FCP right? And using that on the timeline? that's the correct workflow. This enables you to 'open in editor' as you have been doing.
Perhaps there isn't enough media (handle) on the other clip that the livetype clip is dissolving into? The only reason any transition will not extend, or be the length you want it to be is if there is not enough media on either end of the clip.
A super quick way of checking if you have enough media is to use the Slip Tool... Press 'S' to toggle to the slip tool, then click and hold down on the clip in the timeline (be careful not to slip the clip along!). A grey 'bar' will extend beyind the end of the clip showing how much media is there. You can do this to both clips on either side of the transition as a quick test.

Export from Aperture to edit in Windows Live Photo Gallery

Hi.
I'm hoping to work collaboratively with a colleague, in a scenario where I take & edit photos, then pass them over for a possible final touch up before being forwarded to clients.
I use Mac OSX 10.6 and Aperture. He uses Windows Vista and Windows Live Photo Gallery.
The problem we've come up against is this: he is unable to edit the image I've exported from Aperture. I'm exporting as .JPG, and he's able to read them ok - i.e. load it into Windows Live Photo Gallery, but not alter the image.
Does anyone have a similar workflow, exporting from Aperture, then editing in Windows Live Photo Gallery?
Thanks in advance,
PB

Hi Frank.
Thanks for the response.
Agreed, the pertinent question is why can't my colleague edit the JPG exported by Aperture. It's probably also worth pointing out, the same problem occurs with JPGs exported from iPhoto.
The Windows software usually plays nicely with JPGs by all acounts, just not the ones I send - which I do via eMail or my public space on Mobile Me incidently.
So, another key question is: all settings being equal (color profile, quality, etc.) are the JPGs as produced by iPhoto and Aperture indistinguishable from those produced by other apps on other platforms - i.e. does the use of JPG enforce a common standard?
If that is the case, I suspect ours might be a permissions issue.
According to the Microsoft support page on editing in Windows Live Photo Gallery, the inability to edit a picture is commonly caused by unsupported file type, or read-only attribute set on the file.
Unfortunately, he and I are not in the same place, and he's not particularly au-fait with this type of problem solving. Hence, before involving him, I'd like to know:
1. it's possible (i.e. someone else does it), and,
2. what's involved (at my end and/or his).
Thanks again,
PB

IDVD: Files exported from iMovie 11, one works, one "Unsupported File Type : Unknown format"

I used footage from the same camera (taken on the same weekend using the same settings) in several different iMovie "projects". All were shared from iMovie 11 as "File" using the quality setting "SD 480p".
In Quicktime Player, all ".mp4" files will play and they show the following info in its inspector:
Format: H.264, 854 x 480
AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
One exported file will drag, drop, and burn in iDVD just fine. The other two files show the error "Unsupported File Type : Unknown format" as soon as I try and drag them into iDVD.
The only difference I can find is that the one file that works is about 803MB, while the files that don't work are 1.87GB and 3.98GB.
All files and the iDVD project are in the same folder on my startup volume. I've tried deleting com.apple.idvd but that didn't help. I've tried rebooting and starting the iDVD project from scratch but I get the same results.
Mac OS 10.9.1
iMovie 10.0.1
iDVD 7.1.2
Any ideas?

Hello Bengt and thank you again for the replies.
As I mentioned in my previous posts, I'm using iMovie 10.0.1 which has very limited quality adjustments. In every case I chose the smallest size, which iMovie 10.0.1 calls "SD 480p (854 x 480)". I used this same setting on all exports.
I still have iMovie HD (6.0.4) and iMovie '11 (9.0.9) on my iMac so I tried both of them. In both cases, they could import only the file that works in iDVD. Both older versions of iMovie choked on the longer movies shared from iMovie 10.0.1.
I have many many hours into the editing of these clips and I do not want to have to go back and redo everything in an older version of iMovie. Might I be better off going with a different DVD creation software? Or am I out of luck? Because I can't really change iMovie 10.0.1's export settings, I'm afraid there's nothing I can do to get it to export it as something that iDVD can use (really, I can't even tell why it's different and why iDVD doesn't like it).
The software "WonderShare DVD Creator" has no issue with any of the files I've exported from iMovie 10.0.1.

How do i send an html file exported from muse as email blast with images and live links?

My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
Nicole

Unfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.

Document type definitions for xml documents exported from SBO?

I am looking for DTD or XSD specifications for the documents that are exported from SBO via the DI API. It seems that this information is not available with the standard DI API documentation. Does anyone have a clue about where to look for these specifications ?
Best regards,
Henry Nordströ

The DI Company object has a GetBusinessObjectXmlSchema method which allows you to retreive the schema details.
Below is the sample from the DI help file.
Dim XMLStr As String
Dim domDoc As DOMDocument
Set domDoc = New DOMDocument
XMLStr = vCmp.GetBusinessObjectXmlSchema(oInvoices)
domDoc.loadXML (XMLStr)
domDoc.save ("C:\ XMLFiles \MyXML2.xml")
Regards,
John.

"Milky" or faint results when exporting from AE to FCP

(Accidently posted to FCP Express forum-- whoops!)
I've been using After Effects for years now to create graphics for our Avid projects, and the QT results have always been great. Clean, sharp moving graphics. But now that I've been using FCP, I'm not exactly happy when I export my Quicktime graphics from After Effects to FCP: they're extremely "milky" and faint/fuzzy when viewed from FCP over an NTSC monitor. I have tried various codecs when exporting: DV/NTSC, Animation, Component-- all with the same results.
I have read other threads with similar comments (even the thread that mentioned "milky" results when exporting from FCP to AE and back) but none of the suggestions/remarks helped in my situation.
I'm sure others have experienced this. Any suggestions?
Settings:
After Effects comp: NTSC/DV Preset (720 x 480, lower field, etc.)
Export Codecs: DV/DVCPro-NTSC, Animation, Component (all with the same milky results)
Final Cut: Sequence Preset "DV/NTSC 48 Khz"
Also tried using, as one thread suggested, the "Uncompressed 8 bit NTSC 48 Khz" preset and no difference
Side note: I'm using Final Cut in this system outputting to both DV video and Betacam video, using an Aja card for the Beta. Both DV and Beta results look the same (going straight thru the decks-to-NTSC monitor) and they both use the same "DV/NTSC 48 Khz" sequence preset-- except where I changed it to "Uncompressed 8 bit". If I use Animation or Component as my export codec from AE, naturally, I have to render to play the clip back in the timeline. It even looks milky or faint on the FCP source/viewer screens!
And yes, I've checked the NTSC monitor-- a Sony Trinitron PVM-20 monitor. And I've looked at the results on other monitors and even regular TVs. Milky/faint video all around.
Any suggestions would be appreciated!!

Is this on files with alpha channels? Have you tried
changing the Alpha type? Are you having
pre-multiplication problems?
No, they don't have alpha channels. But I did try, when rendering with Animation, changing the colors to "Millions +" which was something I read on another thread. Same results.
Basically, these are After Effects projects with simple backgrounds and moving text. I'm not doing any layering with alpha channels-- like lower third supers.
However, whenever I use Apple programs like LiveType or Motion, the NTSC results look like they did while I was creating the projects with these programs before I rendered them.

How do i export a sequence to an uncompressed quicktime .mov file?

hello everyone.
I have a little problem.
I have a 20 secs sequence that needs to be exported from my FCP 6.0.3 to UNCOMPRESSED quicktime .mov file. Its HDV footage.
These are the steps I've taken.
I go to FILE>EXPORT>QUICK TIME MOVIE. I have all the settings to current setting, and I have checked the "Make Movie Self-Contained" option.
When I'm done exporting, I get a .mov file, but its a Final Cut Pro file, not a quicktime file.
This means I can't open in a PC, where I have to do some compositing.
I would really appreciate if anyone can give me some advise or tips on how to get my export .mov file to be a quicktime file uncompressed .
Thanks
-r

The Uncompressed 4:2:2 codecs only come with Final Cut Pro. Two ways:
1) In FCP, go to File > Export > QuickTime Conversion. Set format to QuickTime Movie and click Options. Go to Settings under Video and set Compression Type to None. Put all the sliders at maximum. Click Ok, deselect Prepare for Internet Streaming and click Ok. Export the file.
2) This is the one I personally prefer, as it will be compatible with any system, even if they don't have QuickTime. Go to File > Export > QuickTime Conversion. Under Format, select Image Sequence. Go to Options, set Format to TIFF and enter the FPS. Click Export and you will have a series of sequentially-numbered images that most compositing apps will treat like one big movie clip.

Data fetch from live cache

How can I retrieve data from live cache?This is in Demand Planning : SCM APO.
Please suggest ways.
Thanks & Regards,
Savitha

Hi,
some time ago I worked on SAP APO.
To read live cache, you first have to open a SIM session.
You can do this as shown in this function module:
FUNCTION ZS_SIMSESSION_GET.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(IV_SIMID) TYPE /SAPAPO/VRSIOID
*" EXPORTING
*"     REFERENCE(EV_SIMSESSION) TYPE /SAPAPO/OM_SIMSESSION
CONSTANTS:
lc_simsession_new       TYPE c LENGTH 1 VALUE 'N'.
DATA:
lt_rc                   TYPE /sapapo/om_lc_rc_tab,
lv_simsession           LIKE ev_simsession.
IF NOT ev_simsession IS INITIAL.
    EXIT.
ENDIF.
*--> create Simsession
CALL FUNCTION 'GUID_CREATE'
    IMPORTING
      ev_guid_22 = lv_simsession.
*--> create transactional simulation
CALL FUNCTION '/SAPAPO/TSIM_SIMULATION_CONTRL'
    EXPORTING
      iv_simversion            = iv_simid
      iv_simsession            = lv_simsession
      iv_simsession_method     = lc_simsession_new
      iv_perform_commit        = space
    IMPORTING
      et_rc                    = lt_rc
    EXCEPTIONS
      lc_connect_failed        = 1
      lc_com_error             = 2
      lc_appl_error            = 3
      multi_tasim_registration = 4.
IF sy-subrc > 0.
    CLEAR ev_simsession.
*   error can be found in lt_rc
ENDIF.
* return simsession
ev_simsession = lv_simsession.
ENDFUNCTION.
Then you can access the live cache.
In this case we read an order (if I rememver correctly, it's a plan order):
DATA:
lv_vrsioid                  TYPE /sapapo/vrsioid,
lv_simsession           TYPE /sapapo/om_simsession.
* Get vrsioid
CALL FUNCTION '/SAPAPO/DM_VRSIOEX_GET_VRSIOID'
    EXPORTING
      i_vrsioex_fld = '000' "By default
    IMPORTING
      e_vrsioid_fld = lv_vrsioid
    EXCEPTIONS
      not_found     = 1
      OTHERS        = 2.
CALL FUNCTION 'ZS_SIMSESSION_GET'
      EXPORTING
        iv_simid      = iv_vrsioid
      IMPORTING
        ev_simsession = lv_simsession.
CALL FUNCTION '/SAPAPO/RRP_LC_ORDER_GET_DATA'
    EXPORTING
      iv_order      = iv_orderid
      iv_simversion = iv_vrsioid
    IMPORTING
      et_outputs    = lt_outputs
      et_inputs     = lt_inputs.
If you change something in your simsession, you have to merge it back afterwards, so that your changes become effective.
You can do this like that:
* Merge simulation version (to commit order changes)
CALL FUNCTION '/SAPAPO/TSIM_SIMULATION_CONTRL'
    EXPORTING
      iv_simversion                = lv_vrsioid
      iv_simsession                = lv_simsession
      iv_simsession_method         = 'M'
    EXCEPTIONS
      lc_connect_failed            = 1
      lc_com_error                 = 2
      lc_appl_error                = 3
      multi_tasim_registration     = 4
      target_deleted_saveas_failed = 5
      OTHERS                       = 6.
I hope this helps...

Photos in FCE; export from Aperture in target size?

hi all.
I'm planning to place photos from Aperture into my FCE project, with the photos fading from one to the next. they won't be full screen, less than half. to get the best final quality, do I need to sharpen and export from Aperture so that the photos are placed within the FCE project at 100% without scaling?
cheers,
Gregory

Hi Frank.
Thanks for the response.
Agreed, the pertinent question is why can't my colleague edit the JPG exported by Aperture. It's probably also worth pointing out, the same problem occurs with JPGs exported from iPhoto.
The Windows software usually plays nicely with JPGs by all acounts, just not the ones I send - which I do via eMail or my public space on Mobile Me incidently.
So, another key question is: all settings being equal (color profile, quality, etc.) are the JPGs as produced by iPhoto and Aperture indistinguishable from those produced by other apps on other platforms - i.e. does the use of JPG enforce a common standard?
If that is the case, I suspect ours might be a permissions issue.
According to the Microsoft support page on editing in Windows Live Photo Gallery, the inability to edit a picture is commonly caused by unsupported file type, or read-only attribute set on the file.
Unfortunately, he and I are not in the same place, and he's not particularly au-fait with this type of problem solving. Hence, before involving him, I'd like to know:
1. it's possible (i.e. someone else does it), and,
2. what's involved (at my end and/or his).
Thanks again,
PB

Use Iphoto library in Live type

Good evening,
Why y cannot open my Iphoto library in live type project?
Cordialement
Gilles Langlois

Because it’s not supported. You’ll need to export from iPhoto and import to Live Type. For best results use tiff rather than png or JPEG
Regards
TD

Importing live type to imovie

I am a newcommer to video editing and have gradually learnt how to use imovie. I have FCEHD but don't know how to use it yet. I was impressed with live type and made a short title sequence however when I render the sequence and import it into imovie the titles appear pixilated and low quality. I have tried importing it as a .mov and .dv and played around with project properties in live type. Can anyone help me

I have exported the movie both to iDVD and a DV video camera which I have played onto a tv but the titles still look pixilated when imported but perfectly crisp if I play the .mov file from livetype. Am I using the wrong project settings?? I have tried different ones but no good. I really want to use the live type titles but they don't look good in my movie. HELP!

Exporting from Live type as uncompressed

Similar Messages

Maybe you are looking for