Exporting from SAP Crystal Presentation Design to PowerPoint
I have been using CrystalXcelsius Standard 4.5 with Windows XP for a couple years. My company recently migrated to Windows 7. I've been told the new version of Xcelsius I need to purchse is SAP Crystal Presentation Design which is supposed to be compatible with the new operating system. I like the software as it seems to be what I need to continue creating Dashboards for my group. However, after having difficuty exporting to PowerPoint as I have done in the past for general viewing, I've stumbled upon release notes that say though this software is compatible with Windows 7 operating system, it is not compatible with the PowerPoint software within Windows 7, and I must save the exported file in PowerPoint 2003. However, when I open the PowerPoint document after exporting, the documement initially looks blank until I click Slideshow, then I get a "Securty Alert - Marcros and ActiveX" message that says "Macros and one or more ActiveX controls have been disabled" and I have to choose either "protect me from unknown content (recommended)" or "enable content". I've been choosing the recommended option. Once I do so the imported dashboard appears. My initial question is am I performing the import correctly, and if so is there a way to get around that error message? My management presents these dashboards to others both inside and outside the company and would prefer that the error does not keep popping up.
Thanks much!
Leanne
Hi,
First of all the message you are getting is not an error its an alerts.and its quite common. this is a standard check,if you want you can bi-passions(not recommended for all applications) this alert.
Open a power point open Power Point Options -> Trusted center -> Trust center settings -> Select active X settings -> Select Enable all controls => Now select macro Settings and do the same.
And you can avoid alert message.
Good Luck & keep posting.
Similar Messages
-
Activating SAP Crystal Presentation Design
I have downloaded SAP Crystal Presentation Design and have it installed. It is now asking for a keycode which I have entered from my Order Details but it is not accepting it as a valid keycode. What is the next step? Who should be contacted for help?
RandyOpen a ticket by SAP support:
http://service.sap.com/support
Regards,
Stratos -
Product key for SAP Crystal Presentation Design (Xcelsius) won't work
Hi There,
I downloaded the free copy of SAP Crystal Presentation Design (Xcelsius), but the Product Key in the e-mail confiming registration won't work.
Does anyone know if there is a "tech support" for this?
Message; "The Key code you entered is not valid. Try again"
Thanks,
John HawkThe "Contact Us" in Service Market Place works slowly but well.
John Hawk -
SAP Crystal Presentation Design
I have recently purchased and downloaded SAP Crystal Presentation Design as this appears to be the first product that works with Windows 7 and Office 2010. However, every time I try hit the small icon to 'Send to Adobe Acrobat PDF' I get the following error message - 'Adobe Acrobat 9.4 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available'. Needless to say, Windows gives no solution to this problem!!
Has anyone else encountered this problem and, if so, did you find a solution? The only remote possibility I can think of is that I also have Adobe Acrobat 9 Pro loaded on my laptop and use it frequently but I cannot believe this would create an Application clash.Hi David - SAP Crystal Presentattion Design 2011 was released on the basis it worked with Windows 7 and Office 2010 - the Version is 6.0.0.0 and the Build is 14.0.0.760. I mentioned in my question that the only potential issue I could see was that I also had Adobe Acrobat Pro 9 installed but assumed that Presentation Design came with an integrated version of Adobe which ran independently to anything I had on my laptop. As a last resort I ran the 9 Pro repair tool and it appears to have fixed the problem and I can now view the Presentation Design output through Adobe! Bizarre, I know but I also recall reading somewhere that users had experienced some Office Application issues after installing versions of Adobe Acrobat. Anyway, thanks for your input but the problem appears to be resolved (at least for now!)
-
Full licensed version of SAP Crystal Presentation Design for FREE
Hi,
I've received the product keycode [u2014 C551B-81JE03S-000ZJMA-9V6C] via email after downloading the SAP Crystal Presentation Design.
http://events.businessobjects.com/forms/Q210/present/sap/
Anyone managed to get the free Product Keycode working?
When I enter the keycode I'm getting the error message:
'The keycode you entered is not valid. Please try again.'
I've installed it on Vista Enterprise SP1
Thanks
NazmulYes. It supports Vista
System Requirements
u2022 Microsoft Office XP or Office 2003~2007 PC with 1.0 GHz processor, 1GB RAM (recommended), and 350 MB hard disk space
u2022 Microsoft Windows XP, Server 2003, or Vista
u2022 Microsoft Office 2003, Office XP, or Office 2007 -
SAP Crystal Presentation Design Upgrade failure
When installing upgrade of SAP Crystal Presentation Design I get an Internet Explorer error "unable to load frame's content". I am using IE 8. It hangs and will not move forward. Any suggesstions?
Hi,
Try running Crystal Presentation Design (aka: Xcelsius) with the supported Internet Browser Version.
Supported Browsers (for Xcelsius 2008 up to SP3)
Microsoft Internet Explorer 6.0 SP2
Microsoft Internet Explorer 7.0
Mozilla Firefox 2.0
Mozilla Firefox 3.0
Else you may want to try your luck and switch on Compatibility Mode for IE8.
http://support.microsoft.com/kb/956197
Regards,
Ken -
Can be use SAP Crystal Presentation Design 2011 in Windows 8 and Microsoft Office 2013?
I had problems in converting a design to a presentation in Power Point, but I have no problems in Word and PDF, why?
Hi Marco,
Please repost to the BI Dashboards space.
-Abhilash -
Differene between SAP Crystal Dashboard Design and Presentation Design
Dear All,
SAP Crystal Dashboard Design
SAP Crystal Presentation Design
Somehow I am failing in installation of the both versions to find the difference whereas the price variation between these two are so high.
Can anyone brief me the exact difference between above two.
Again inside the TAB of any one of the above we see there are 2 versions named Departmental and Personal Edition in which Personal Edition costs too high. Unable to know why such difference in pricing that too for personal edition.
http://store.businessobjects.com/store/bobjapac/DisplayHomePage/Locale.en_AU/Currency.USD?resid=U3HNbgrR-QEAABWhUYcAAAEF&rests=1399967101710
Thanks
BaaRaa.Hi Baskar,
To get the difference between the crystal presentation design & dashboard design, please check the below link.
Snapshot Design Software | Demonstrating Value
Announcing the SAP Crystal solutions portfolio
Related to license it may differ based on the departmental, presentation or personal. Where some features will be disabled you can get complete features in departmental edition. For more info on comparison check the attached screenshot.
Hope this Helps!!!
--SumanT -
Crystal Presentation Design install failure
When installing SAP Crystal Presentation Design, an error pops up that says Windows XP or higher applications: Outlook, Excel, Word, etc. must be pre-installed". Then it says an error has occurred and the installation stops. Anyone have a clue?
I have the same problem with Windows Vista Ultimate 32-bit and Office 2010. I have Microsoft Office Project 2007 on same computer. Installer says you must have Office XP or Higher and then terminates.
I am not able to use the free software or evaluate the free trial when the software will not install on a pretty typical machine.
Is theer any update or news on this? A workaround or other correction? -
Can Xcelsius 2008 Engage coexist on the same machine as SAP Crystal Dashboard Design?
I still have the requirement to maintain dashboards created with Xcelsius 2008 SP5. Will the install of SAP Crystal Dashboard Design: Departmental overwrite or disable the ability to run Xcelsius 2008 on the same machine?
Thank you for the reply. I am not sure I phrased the question very well, as I said in the post I am aware Personal Edition does not require viewing licenses. What I was asking was whether the 'internal business use only' clause in the EULA prevented dashboards built with Personal Edition from being placed on external company sites?
If anyone could provide an answer to this it would be greatly appreciated.
Thank you. -
Can this software be installed and worked from the client station rather than the server?
Hai
This Links is Similar to u r thread ,it may help u
http://www.qnasap.com/sap-crystal-dashboard-design-dialog-initilization-failed/
http://youtrack.developer.mindtouch.com/issue/MT-7342
http://youtrack.developer.mindtouch.com/issue/MT-10470 -
SAP Crystal Dashboard Design Personal Edition - Lifeoffice available
We like to build a dashboard on Crystal Report Server
We wanted use the CRS + SAP Crystal Dashboard Design Personal Edition + CR or CRS + the package (CR + CX)
Does that include the lifeoffice Connecion?
Thanks for help
Beat HoneggerNo direct way. But I had a similar requirement. Our team updates a central spreadsheet and our managers wanted to have a dashboard to reflect information entered on it. I ended up writing a VBA Macro using an XSD schema to use Excel XML Maps to export the spreadsheet data to .XML at the click of a button.
Then, in an Xcelsius model, I imported that same Excel XML Mapping .XSD schema into my model, and pointed it to the location of the exported XML file to then have "live" data whenever the source Excel file was saved. It seems an around the world way to get to Excel data (albeit in a separate file), seeing as the tool was originally written with Excel being the central focus.
There's also a more lengthly route to do it, but treating the Excel file as an ODBC source for a Crystal Report which Live Office will recognize which you can then use as a connection to Xcelsius, but that seemed even more painful for our purposes but in theory works. -
Clarification On the following from SAP/Crystal
We need to clarify the following from SAP/Crystal:
u2022 Background:
o The Application is an ASP.Net web aplication with Crystal reports XI integrated.
o Some reports (templates) created in Crystal Reports 2008 deployed on the site
o This is working
u2022 Need to understand
*o What new features of Crystal Reports 2008 will not work in this situation*
*o What existing features supported in Crystal Reports XI will no longer work for these templates*The Crystal .NET runtime you use is version XI or 2008? If it is 2008, then reports designed in 2008 should work fine. what may or may not work between XI -2008 is really depends on how your reports are designed. However it should mostly work as is.
Check [CR 2008 release notes|http://help.sap.com/businessobject/product_guides/cr2008V1/en/xi3-1_cr_release_en.pdf] and [What's new in CR 2008|http://help.sap.com/businessobject/product_guides/cr2008V1/en/xi3-1_cr_whatsnew_en.pdf] where you can find more information on what may or may not work from CR XI to 2008. -
SAP Excelsius Presentation Design
Dear Forum,
I have use SAP Excelsius Presentation Design, using my excel worksheet to make some dashboard. BI is a new for me, before it i used Pentaho BI Designer and Pentaho BI Server. But i dont find the SAP Excelsius process stage like Pentaho.. there is a design module and server module, also Pentaho can use any kind of database system... Can any one give me the figure what product should i used if i want to make a live BI dashboard on web browser and automatically integrated with MS SQL database.
Thanks.
SusanHi Susan,
Unfortunately I do not know Pentaho... So, what do you mean by "process stage"?
I know that in future versions BO Tools will be able to pick data dinamically (at the same time) from several data sources besides BI, but I did not understand if this is the main point here (getting data from BI AND SQL Server together) or some live data updating into the dashboard (maybe both ).
Perhaps I could help further if you explain a bit more...
Kind Regards,
Marcio -
Hi
Does SAP Crystal Report Designer ( which is used to design reports , where these reports can be used in WPF Crystal Report Viewer , WinForms Crystal Report Viewer has Localization support) , has localization support , can we generate custom language assemblies and bind to Report Designer?What version of CR Designer?
Have you consulted your CR Designer Help files? I suspect searching the help file for "localization" will give you quite a bit of informatoin. Also, don't forget to use the search box in the top right corner of this web page.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Maybe you are looking for
-
Passing multiple values to a parmeters in Discoverer 4i
Hi Friends, I have a requirement of passing multiple values (Operating Unit Names) to the parameter(P_Opr_Unit) in Discoverer. I am using PL/SQL function to get the data in Discoverer.Function is working fine for multiple values from Database(SQL Dev
-
[ISA570][router212c52]IPS Alert
Hi all. Last night I set up my new Playstation 4 and after some messing around my ISA570 sent me this email. (see attached Text file) The destination address is my PS4. and I did recall having some trouble with some of the services. Question is this.
-
Using Apple TV With Macbook Closed
Hi, I have recently bought Apple TV and I know that the device has internal memory that it uses to load its content. My question is, once the content has been "loaded" into the Apple TV, can I then close the lid of my Macbook and start to watch or do
-
IBook to 17" Studio Flat Panel
A friend of mine gave me his iBook to check out, and I'd like to to hook it up to my 17" Studio Flat panel. I believe it can be done, but searching around the Apple FAQs is time consuming. What adaptor cable do I need? And while we're at it, would th
-
how to convert the generated output to XML format in smartforms and how to send through internet?