Exporting Good Quality 50P Footage?

Hi All,
I am a scientist studying animal behaviour and I have filmed footage using a Sony NX70 at 1080/50P AVCHD, and using GoPros at 720/50P and 1080/25P. I need to keep the footage at 50p because I am looking at detailed (and very fast) behavoiurs frame by frame.
I can edit and view the footage (albeit very jumpy) at 50P in Premiere CS6, but I cant work out a way of exporting a 50P clip for analysis. I have tried exporting at HDV 720p50, but the exported clip is still 25p.
Any ideas?

Your footage should not be jumpy. If 50p is a problem on your computer, you should address that issue. Perhaps get a graphics card from the list of cards that work with the Mercury acceleration. Or, perhaps your sequence does not match your fps?
Nonetheless, export using H.264 and you can choose 50p without a problem. Start with a 25p YouTube setting, for example, and you can modify what you want to make it something like this:

Similar Messages

Export good quality to itunes

I'm a brand new user to Soundtrack. I took a song and extended it by adding in the chorus into a few places. I saved my project and then opened it with itunes. It plays fine in Soundtrack, but in itunes the quality is terrible. Is there a way I can export the song in the quality that it plays in Soundtrack?

This is more likely to be an iTunes issue than Soundtrack.
What are the options you are choosing when you Export?

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

How to export videos in good quality?

hi,
this is my first post on this discussion board, so please be understanding.
ok, so i have to prepare lot of videos for web, in Final Cut Express. mainly interviews, which are about 3 minutes to 5 minutes long max. on the other hand, i have restriction, that this videos should have max. 10 mb weight.
and me questions is, how to make it? Of course i want good quality!
how to do export, which setting i should customize?
or maybe which another program i should use to convert it later?
i'll be very thankful if You will write a little explanation!

Generally, exporting to H.264 or MP4 will give you the smallest file sizes. Plus, most web videos are not full screen and are at slower frame rates than regular video. You will have to experiment with some of the settings.
Export to QuickTime Conversion, select the H.264 or MP4 codec, try a couple of different options. First, reduce the size to 320x240 or smaller. See if that gives you the target file size. If not, try a smaller size. Then, if you still need to reduce the file size, try reducing the frame rate. Only change one thing at a time until you get the file size you need.
This article from Ken Stone may help - QuickTime movies from FCP - For the Web.

How to export as a .mp4 file in good quality?

Hi,
I want to produce a video as a .mp4 file which suits best for the webb.
How to export a project from iMovie as a .mp4 file in a GOOD quality and original size or ratio?
What to do?
I went to Share-export with Quick Time and changed the file format to MPEG4 but the quality is really bad. The size is small 300x200 something and picture quality is really bad.
How to produce a video easiest in iMovie which suits best for the webb (in HD quality). Not all people have Quick Time so .mov is not suitable. And .m4v files don't play very well on webb. They get stuck.
What to do?
Thankful for your help.

Today I started this project, and garageband no longer has "export movie" as a choice,
Are you now using GarageBand 10.0?
Then import the movie,
Track menu > Show Movie Track
File menu > Movie > Open Movie
Mix the sound track song
Then use the "File" menu > Movie > Export Audio to Movie.
This will write the audio aa an audio track into the imported movie.
-- Léonie

Can't export flash cs6 in good quality

Hi, I can't seem to export my animation from flash cs6 in good quality. I tried exporting in avi, but that reduced the quality a lot and when I exported in quicktime, the audio didn't sync well. Not sure what to do, but I really want the video to look like it does when I test it as a swf file. Is it possible it is due to my computer? (I thought my computer is decent enough but perhaps not?) Thanks!

Thanks moccamaximim. I've tried that, but still it's poor quality. I've come across this page http://helpx.adobe.com/flash/kb/tips-reducing-dropped-frames-enhanced.html which is pretty helpful (I realized the problem is frames are being dropped), but I am not sure how to install the custom command the page has which might fix my probem. It looks like:
To install the custom command:
Download videoPreferenceCommand.zip.
I am also going to try the trial for flash cs5 to see if that helps at all. Any tips specifically for reducing dropped frames would be great.
Thanks!

How can I create 50p footage from 50i in Premiere or After FX?

Hi,
I'm trying to create 50p footage from 50i. Not 25p! I want to create 50p footage through a process that it is used in 100 HZ LCD TV sets
This is the idea. If you have 50i footage you can easily interpolate fields and get a 25p footage. Fine.
But I would like not to do a simple interpolation.
Let's say I have two 50i frames. I want to create a frame between the two made with the lower field of the first one and the upper field from the second one . This is the process used by 100 Hz LCD monitors that can actually invent non-existent frames by this method.
But Premiere doesn't work this way.
If you try to export a 50i footage to 50p what you get is 50p footage with identical frames at twos (1=2, 3=4, etc..)
You can try a slightly different approach.
You can slow down 50% the 50i footage (and then speed it up again). This forces Premiere to interpolate and create an extra frame but.. here is the problem.. Premiere "thinks in frames".. and interpolates a totally new interlaced frame. This frame, coming from interpolation, is actually a "fake" frame Comes from nowhere and so it has much less definition then the originals (the one before and the one afterwards). If then you render, speed up at 200% and watch the result what you see is a good frame, a blurred frame, a good frame, a blurred frame, etc..
Does anybody know a method of getting out 50 real interlaced or progressive frames with this composition?
INTERLACED (100i): 1U1L 1L2U 2U2L 2L3U 3U3L
PROGRESSIVE 50p): (1U1L) (1L2U) (2U2L) (2L3U) (3U3L) .... That is exactly as interlaced but with the two fields interpolated
Also please note that this method applied on an edited movie creates smooth transitions at cuts (a frame that has 1 field from the scene before and one form the scene after).
thanks,
Marcello

I would do this outside of Premiere.
Here's a thread to pull.
Though the web site information deals with NTSC, the script's author (Dan Isaacs) has built in several PAL options as well. I've just never used them.

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?

I have a film in a proyect made with a miniDV camera in my old Premiere 6.5
It has 68 minutes and after exporting it with the Microsoft DV AVI compressor in 100 % quality and not compressing the audio, it ended in an AVI of 14 Gigas.
I would like to obtain a DVD of the best quality in audio and video possible. How can I do it? SHOULD I EXPORT IT FROM THE PREMIERE 6.5 WITH ANOTHER COMPRESSOR OR IN LESS THAN 100% QUALITY WITH THE SAME DV AVI COMPRESSOR ? my INTENTION IS TO USE THE NERO VISION AFTERWARDS... I HAVE THE NERO VISION 4...-. FROM 2007- WOULD IT BE OK OR IS THERE A BETTER ONE? - I know there are newer ones...but better?
OR SHOULD I JUST USE THE ACTUAL 14 GIGA AVI PROJECT AND PUT IT STRAIGHT INTO THE NERO ? I GUESS THIS NERO COMPRESSION SHOULD BE WORST THAN THE ONE THAT THE PREMIERE WOULD MAKE...
Thanks a lot for all the help and advise you could give me !!!!!!!!!!!!!
PS IF IT IS A PROBLEM TO MAKE A GOOD QUALITY 8 GIGA DVD I COULD JUST MAKE A 4 GIGA ONE...

68 minutes DV should fit just nice on a single dvd.
Feed the DV file directly into Nero. Nero will transcode everything for you.
You can also use AME from Premiere 6.5 and export the timeline direct to mpeg2-dvd.
Unfortunately i do not know if Nero is going to re-transcode this mpeg file before burning to dvd.

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?I have a film in a proyect

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?
I have a film in a proyect made with a miniDV camera in my old Premiere 6.5
It has 68 minutes and after exporting it with the Microsoft DV AVI compressor in 100 % quality and not compressing the audio, it ended in an AVI of 14 Gigas.
I would like to obtain a DVD of the best quality in audio and video possible. How can I do it? SHOULD I EXPORT IT FROM THE PREMIERE 6.5 WITH ANOTHER COMPRESSOR OR IN LESS THAN 100% QUALITY WITH THE SAME DV AVI COMPRESSOR ? my INTENTION IS TO USE THE NERO VISION AFTERWARDS... I HAVE THE NERO VISION 4...-. FROM 2007- WOULD IT BE OK OR IS THERE A BETTER ONE? - I know there are newer ones...but better?
I HAVE POSTED THIS A FEW DAYS AGO. THANKS TO THE PEOPLE THAT REPIED. BUT I THINK MY QUESTION IS NOTFULLY ANSWERED YET.
i NEED THE BEST QUALITY I CAN GET, EVEN WHITH MY PREMIERE 6.5, BECAUSE IT IS A FEATURE FILM THAT TOOK ME SEVERAL YEARS AND THIS LAST REMAKE IS NOW READY AFTER TOO MUCH WORK.
THANKS A LOT !!!!!!!!!!!!!

Hello Thanks for your replys and sorry for being so fussy about this.
I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
I have the Nero Vision 4.9.6.6 But I may be able to look for another one if you think it is better...
Thanks a lot for your advises...

Pro Res in Final cut express How do i get a good quality SD DVD

I recently bought final cut express and have suffered getting a good quality SD DVD out through the workflow from my cannon XHA1.
On screen its fine but when i author through imovie to DVD the quality is poor.
So reading the various threads it would seem that i need to use Pro res and the ingress codec... But cant find this option in express ?
Question is. Is pro res codec available in express and if not can someone suggest the optimum set up for HD capture to SD DVD output
Many thanks

Use either of these techniques to get good quality DVDs from AIC.
1. Edit your HDV/AIC in the timeline. Then create a new DV-PAL (NTSC) Anamorphic sequence. Copy your edited HDV/AIC to the new sequence. Do not alter anything. Render the sequence ..... this will take a long time - up to twice the length of the project. Then File>Export>QuickTime Movie (Not Self-contained).
However, if you use the QT Movie in iDVD you will get a squashed 4:3 movie, so first of all you must make QT stretch it out to its proper 16:9 dimensions like this:-
+a. Open the exported movie file in the QT Pro player.+
+b. Go to Window>Show Movie Properties.+
+c. Select the "Video Track" and in the "Visual Settings" panel uncheck "Preserve Aspect Ratio".+
+d. In the "Scaled Size" box set the width to 1024 pixels for PAL.+
+e. The "Video Track" will have turned grey, so click it to make it blue again.+
+f. The opened movie file will jump to 16:9.+
+g. Close it with the red button and click Save.+
2. This method is fast. Set your camera to "Locked DV" which means that FCE/FCP will capture it as anamorphic DV and edit it as standard definition anamorphic DV. (Use Easy Setup ... DV-PAL (NTSC) Anamorphic).
You can then Export>QuickTime Movie to be used in iDVD and use the stretching technique mentioned above.

Every time I send a photo it sends with "For Review Only" on the photo. How can I remove this so my recipient gets a good quality photo?

Every time I send a photo it sends with "For Review Only" on the photo. How can I remove this so my recipient gets a good quality photo?

If you used the Apple Professional Training Series 'Aperture 3' book, then this was in lesson #1 which had you set the 'Image Export' preset for the 'Email Medium - JPEG' to 25% of Original Size and to add a watermark (which happens to be the PSD file that overlays the image with 'For Review Only').
You can fix this by going to 'Aperture menu > Presets > Image Export...' and selecting the 'Email Medium - JPEG' preset and then deselecting the 'Show Watermark' option.
Note - you can also reset the 'Percentage of Original' field to %100 to get back to the defaults.
If you did not use the APTS - Aperture 3 book mentioned above, then I am not sure where you got the watermark.

Best way to produce good quality DVDs?

Hi,
Am using FCE, external LaCie DVD burner and Toast.
When I convert a FCE project to quicktime, then transfer to DVD, using an external LaCie burner and Toast, the resulting quality is very poor.
I had previously thought this was just par for the course with the footage I was producing, however I recently had a film shown at a cinema (straight from tape) and the quality was amazing - even on a large screen.
I commented to one of the guys who worked at the cinema that I was surprised by the quality of the footage given that my DVDs are so rubbish. He told me that they are so poor because of the equipment I am using to burn them and that if I had it done professionally, the quality would be much better.
What causes this?
Is there any software/hardware I can upgrade to which will produce good quality DVDs?
Nicola

Hi,
Am using FCE, external LaCie DVD burner and Toast.
When I convert a FCE project to quicktime, then
transfer to DVD, using an external LaCie burner and
Toast, the resulting quality is very poor.
Which version of Toast are you using? Are you using Toast's encoder to create the disc image? The latest version of Toast (Titanium 7) is supposed to have a much improved encoder. Also iDVD5 and iDVD6 show big improvements over earlier versions. However, I don't think MPEG2 DVD will be the full equal of the original DV, but it should come close. I suspect high-end DVD mastering programs are needed to get the best results.
867 MHz PowerPC G4 Mac OS X (10.3.9)

Need good quality video to post for website, but under 2MB. How?

Hi all-
I need some help with exporting a video that will be viewed on a personal business website. I need it to look good, but the web designer says it must be no more than 2 MB. How do I export this 4 minute clip at a decent viewing size, with good quality and keep it so small? I have flipped through the Ken Stone articles and I get so overwhelmed by them. Is there an EASY way to do this?
Thanks sooo very much for any feedback.
Karen

Hi Peter -
Thanks for your response. The video is of a speaking presentation, to be shown to organizations on the web that might want to hire the speaker, so quality should be decent. So far I just did Ken Stone's recommendation of 320x240, H.264 @ 2000, mono, AAC 64 bit, best quality.... silly me. Of course that resulted in a 63.4 MB video!! Now I just don't know what I need to alter to make it so incredibly smaller and still be worth watching. When i get back from dinner, i will try to do the ipod size and see what happens. Thanks for the suggestion.
Any other helpful hints are very much appreciated!
Thanks,
Karen

How to export height quality gif frm Flash CS3?

Hi,
When i export a .GIF movie from Flash CS3 , the movie quality is not good, here is some dot dots in the gif movie.
How to export height quality gif ? . Kindly explain pls as soon possible...
Thanks & Regards
Mohan

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How do I convert iMovie HD to show in good quality on the new iPad pleas?

iMovie HD bundled with the 06 iMac is great for converting to DVD and the iPhone, but how do I get a good quality output to the new iPad? The videos ar grainy to say the least when viewed on the latter.

Hi.
I have the latest version of iMovie but all the video's I want to convert are the 06 iMovie HD. They all export to the iPad but the quality is poor. I imported to the latest iMovie but all it comes up with is to tell me the frames will be blank.
Also the 1080 is grayscaled out. HD iMovie predates the iPad,as you know by many years. But my original and early iMac copes with most things but I guess I must be doing something wrong!

Exporting Good Quality 50P Footage?

Similar Messages

Maybe you are looking for