Exporting HDV project for use in Premiere

Hello All,
I have cut a new scene for a film previously edited on Premiere Pro 1.5.
The new scene was put together on FCP 5.1 and whenever I export I am left with a file that my PC doesn't recognise.
Does anybody have any thoughts on this?
Many thanks,
Paul

the simplest fix for this is to put the scene back to tape and digitise it on the PC straight into premiere.

Similar Messages

Export of Elements 12 Project for use in Premiere Pro

Hello. Simply (or not so simply), I just want to know if I can export a Premiere Elements 12 Project for use in Premiere Pro CS6 or CC. I would like some form of verification such as a page in a manual or a link to a web page. Just getting the answer "Yes" will not do. Sorry but this has been very difficult to locate and am concerned it can't happen.
Thanks,
BK

"Adobe's target audience is just not likely to later need to edit a Project in a professional NLE."
Thanks Bill and I understand. However, given the current choices of NLE's today and many Professional Users "scrambling" to find replacements for FCP7 and "aging" Avid, I would think that the workflow I'm suggesting might be a cost effective and viable alternative that Adobe should consider very seriously. If it was never brought to their attention before, I'm mentioning it now!
If we can avoid the cost of putting PrPro into the hands of Preditors and leave the Pro Finishing to the real Pros, that would be very helpful not only financially but it would make learning and working with the software much easier for them using Elements.
So, I guess the only way to find out if this works, is to download the trial versions of each and have at it.
Unless someone out there already has both of the most current versions and is willing to try this?
Either way, I'll have to find out sooner or later because we are moving to Pro eventually.
Thanks again,
Bob K.

Exporting HD project for use in DVD SP

Hi Guys,
Very glad I found this forum as I am just out of ideas to get this working. Here is the situation:
I have a project of a wedding in HDV, which contains 3 sequences with the following lengths:
The Service = 45mins
Photoshoot = 5mins
Reception = 80mins
I have decided I would like to have the Service + photoshoot on ONE DVD and the reception on ONE DVD. If possible? If not possible I will have the reception spread over two but i do not see the need.
First of all I have a Powermac dual 1.8 which doesn't have a dual layer dvd burner, so to have a higher quality result and to be able to fit more on I have decided I probably best to get a Dual Layer burner to do this project.
But before I do that, I need to work out what is the best settings for exporting this project out of FCP 5.1 to work on a SD DVD? Do I use compressor? If so which preset or what settings of my own? I have tried various things and I honestly get lost and my project in DVD SP is around 12GB. So i try exporting again with other ways in compressor and then the quality just looks terrible.
The FCP project is all in HDV with apple intermediate codec so I would be exporting from that, but obviously only need the DVD in SD!
If it helps converting the HD project to SD/DV I can do that with the sequence which I did try and then some more export experimenting but it looked really bad.
Please help guys I am desperate and no idea on what to do here.
I really appreciate your time, feel free to ask me anything to help you determine what I should do.
Thank you so much.
Matt

Fortunately for you, somebody else asked this question earlier today.
http://discussions.apple.com/thread.jspa?threadID=1037105&tstart=25
Search is your friend.
--Tex

EXPORT HDV PROJECT FOR CINEMA

I have created a project with HDV 180i50 setting and would like to export it as the highest possible quality because it is going to be put on 35mm film for cinema. I thougth it would be good to export as TGA file, but I don't seam to be able to get it widescreen. What do you think I should do? Thanks!

I have created a project with HDV 180i50 setting and would like to export it as the highest possible quality because it is going to be put on 35mm film for cinema. I thougth it would be good to export as TGA file, but I don't seam to be able to get it widescreen. What do you think I should do? Thanks!

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Exporting final project for youtube (with high quality)

hey guys,
i have been trying to export videos and upload them onto youtube giving them a high quality look for some time now.
the website recommends for the best quality:
-mpeg 4
-320X240
-MP3 audio
-30 fps
there is even a video on it here:
http://www.google.com/support/youtube/bin/answer.py?answer=55745&topic=10526
i tried two different ways of exporting my project. i use fc express hd on a macbook pro...the first export was an mpeg 4 divx export. i used the 4 recomendations but it still came out pixilated. i then tried the regular mpeg 4 option in the export menu. this one had a different audio option. there was no mp3 listen and ACL audio or something like that,
either way they both came out pixilated! this was only a 5 minute long video. i have seen plenty of videos on youtube that were 8 minutes long and crystal clear.
there must be SOMETHING i should change in my exporting options! please help! its been like a year and a half now that ive been searching for clear youtube videos!
thanks for your time,
Mike

hmm i tried there suggestions and unfortunatly it came out pixilated!
i was excited to see the results too because that page given seemed like it would work...
i double checked all of the settings and they matched up with what they suggested...
does any body have any suggestions? thankyou!

Converting Nokia N95 MP4 videos for use with Premiere Pro?

What would you say the best way to convert Nokia N95 MP4 videos for use with Premiere Pro is?

Sheesh.
This "
How do I convert my files?" entry at the PPro Wiki might offer some insight.

HOW INSTALL ENCORE CS6 FOR USE IN PREMIERE PRO CC ?

SOY AFICIONADO A LA EDICICION Y POSTPRODUCCION DE VIDEOS, Y ME HE ANIMADO A SUSCRIBIRME A CREATIVE CLOUD, PERO NO CONSIGO INSTALAR ENCORE CS6 PARA PODER UTILIZARLO EN PREMIERE PRO CC, PIDO AYUDA A VER SI ALGUIEN PUDE AYUDARME, GRACIAS.

Thanks a lot, it works perfectly.
El 27/11/2014, a las 20:15, Ann Bens <[email protected]> escribió:
HOW INSTALL ENCORE CS6 FOR USE IN PREMIERE PRO CC ?
created by Ann Bens <https://forums.adobe.com/people/Ann+Bens> in Premiere Pro - View the full discussion <https://forums.adobe.com/message/6967716#6967716>
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6967716-699851/EncoreCS6-14.png <https://forums.adobe.com/servlet/JiveServlet/showImage/2-6967716-699851/EncoreCS6-14.png>
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6967716#6967716 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6967716#6967716
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Pro by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 81>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Exporting from FCP for use with PC

Hey all,
Trying to deliver a high-med quality 8 minute video from FCP for use with a PC. I've tried exporting both a .mov and .avi using DVCPro50, but neither are readable through the PC. Best I can get is sometimes audio will show up. Does anyone have a good solution for exporting from FCP for use with a PC?
Thanks again for your help!

I don't think DVCpro50 codec is available on a PC. I think panasonic has a special license with apple only, so you need to try a different codec for the avi.

Structure inDesign document and export as XML for use in the web

Hello everyone,
I just recently started using inDesign and I am fascinated by its possibilities! I use it for a project where a finished inDesign layout that is used for a printed publication is now supposed to be transformed for implementing it on a web site. My job is to export the inDesign document as an XML file. After massive reading the last weeks I'm quite familiar with the structuring and tagging in inDesign. Though there's some issues I do not understand. Your precious advice would be of highest meaning to me
The programmer who will later use my XML output for the web-transformation needs the document structured in different levels like "Root > Chapter > Subchapter > Text passage / table". I already structured the document with tags like title, text passage, table, infobox,... but the structure is just linear, putting one item following to another.
How can I structure the document with reoccuring tags that enable me to identify the exact position of an item in the document's structure? So that I can say for example "text passage X" is located in chapter 4, subchapter 1. This has to be done because the document is supposed to be updated later on. So maybe a chapter gets modified and has to be replaced, but this replacement is supposed to be displayed.
I hope my problem becomes clear! That's my biggest issue for now. So for any help I'd be very thankful!

Our print publications are created in InDesign CS5 for Mac then the text is exported to RTF files then sent to an outside company to be converted to our XML specifications for use by our website developers. I would like to create a workflow in which our XML tags are included in the InDesign layouts and then export the XML from the layouts.
Some more detail about what kind of formatting is necessary might be helpful.
I know that IDML files contain the entire layout in XML format. Is it a good idea to extract what we need from IDML, using the already-assigned tags?
Well, if you want to export the whole document, it's the only reasonable approach.
We use a workflow system such that each story is a seperate InCopy document, stored in ICML format (Basically a subset of IDML). Our web automation uses XSLT to convert each story into HTML for use on our web site; it also matches it up with external metadata so it knows what is a headline and what is not, etc.. It is not exactly hassle free, and every once in a while someone uses a new InDesign feature that breaks things (e.g., our XSLT has no support for paragraph numbering, so numbered paragraphs show up without their numbers).
You could do the same thing with with IDML, you'd just have to pick out each story, but that's small potatoes compared to all the XSL work you're going to have to do.
On the other hand, there may be better approaches if you're not going to export the whole document. For instance, you could use scripting to export each story as an RTF file, and then you could convert the RTF files into HTML using other tools.

How to Export Aperture Library for Use by Windows PC

Hello and thanks in advance for your help. I have recently returned to using a Mac after years of PC use. I'm using Parallels for some apps that are PC only, an astronomy program, TheSky6, for example. One of the first things I did was purchase Aperture and move my 40GB photo library into it. "Move" is the operative word; I didn't want to use up too much disk space so my photo library now exists only in Aperture. What I didn't realize, at the time I was happily deleting my Photoshop Album library, was that Aperture creates its own universe, and the actual photo files are no longer easily accessible, buried as they are, so to speak, within Aperture folders containing proprietary tags, etc.
Is there an easy way to recreate the folders with just the jpegs, tiffs, raws photo files and nothing else? I realize of course that I could do this photo-by-photo, but it would take an awfully long time. I have tried exporting the projects, but they just export as aperture projects, so that didn't work. I also tried using Photoshop Album (on the pc side), hoping that it would just import the photo files and ignore all the aperture stuff--that didn't work either. A wonderful Apple Script program called "Aperture iPhoto Sync" did work somewhat, but it kept giving me errors before it was finished, and I couldn't keep track of what had copied and what had not.
Learning from my mistake (the story of my life!), I have realized that I would like to keep the photo files accessible to a PC as well. I keep thinking I am missing something really simple here. Any thoughts would be appreciated.
Karen
imac 24" Mac OS X (10.4.9) 2.15 GHz Intel Core 2 Duo, 2 GB ram

May I humbly and quietly suggest to read the manual before doing anything drastic.
It would have been better to import all your images as referenced masters. Images would have stayed in the location they were in and the Aperture library would only have contained links or references to them. This would not have used up extra hard drive space.
A good site for Aperture is the Bagelturf site.
Have a look at this article in which Bagelturf explains "relocate and consolidate" of images.
http://homepage.mac.com/bagelturf/aparticles/ref/refrecon/refrecon.html
Considering your objectives, using referenced masters is the best option for you.
success
Berend

Saving After Effects CS 6 projects for use in CS 5.5

Hello all,
I'm a university student who has the academic version of After Effects CS 6 for use in my media classes. It works wonderfully and has the potential to be a real time-saver... I live off-campus and can't always get to the lab to work on my projects. That being the case, there's a problem in transferring the work to the lab machines... they have Adobe CS 5.5 installed, not CS 6. When I tried to work on the project from home on the lab computer, it throws up a compatibility error and doesn't open.
If I can't open the projects at school, then the point of using CS 6 at home is moot. How do I save projects on my CS 6 machine as to be able to open them on CS 5.5 machines?

You can also use pt_OpenSesame, a script by Paul Tuersley, to convert a project to a version that can be opened by previous versions of After Effects.
http://aescripts.com/pt_opensesame/

Problem exporting FXG file for use in Flash

I have a simple rectangle with a 3D-bevel effect built in Illustrator that I need to export as an FXG file for use in Flash.
When I export from Illustrator to an FXG format, it creates bitmaps and embeds those in the FXG file.
if i import directly into Flash CS5 there are transparent gaps (and the symbols created are very complex), and it warns me that the objects aren't compatible with flash and they should be converted to bitmaps first.
Is there a way to export the object to an FXG file and keep it in a vector format?
if not, and this may be an Illustrator question, is there a way to create the same kind of effect so that I can get an end FXG object that will work in Flash?
An example of what I am seeing is posted here: http://idg-partners.com/flash_issue.html
Thanks in advance.

Is there a way to export the object to an FXG file and keep it in a vector format?
Create the bevel edges as separate objects with gradient fills. not sure why you need AI, though. You can do that jsut the same directly in Flash...
Mylenium

Creating DVD Templates buttons for use in Premiere Elements

I have tried to create buttons for use in the "DVD create template" function.
Everything goes fine apart from the fact that, when I add the button (within the wizard) it becomes part of the background.
Does anybody out there know if it is possible to create new buttons in PE4.0 and, if yes, how to do it?
Thanks

Even though this function is in PS Elements 4, I suggest that you look in the Premiere Elements forum where you might find an existing thread on this topic. If not, ask your question there because the primary audience for this function is people who have both products.
http://www.adobeforums.com/cgi-bin/webx?14@@.3bb574e6
Barb O

How to record screen shots for use with Premiere Elements...

I am putting together a tutorial on how to navigate and use my company's web-site. How do I video record my navigation of the website for import into Premiere Elements? I am thinking it is something easy I am missing. Do I simply shoot a video of my computer screen as I am navigating the site, or can my computer record in video format what I am doing on the screen? I am using Vista on a Toshiba laptop.

pgnd wrote:
I am putting together a tutorial on how to navigate and use my company's web-site. How do I video record my navigation of the website for import into Premiere Elements? I am thinking it is something easy I am missing. Do I simply shoot a video of my computer screen as I am navigating the site, or can my computer record in video format what I am doing on the screen? I am using Vista on a Toshiba laptop.
It's been a while but, in the past, I've used both the free 'CamStudio' and 'Wink' software (I think I found Wink the better of the two).
Adobe also selll their own video capture software 'Captivate'.
Or here's a whole page of video capture software: http://capture.software.informer.com/download-capture-video-and-record-screen-action-in-av i/.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Exporting HDV project for use in Premiere

Similar Messages

Maybe you are looking for