Exporting image buttons

Hi,
I'm working on a Captivate project that I haven't created myself and I'm trying to extract the images used for some buttons. Is there some way to do that? I can't see the images in the library, so where are they?
The reason for all this is because when I copy the buttons in another Captivate project it works fine, but a copy of the button from the new project (so basically a copy of the copy) doesn't... and that puzzles me greatly. It might sound silly to want to do that... long story short, I need to give the buttons made by some service provider to the other without sending them the whole file.
Any ideas? I'm using Captivate 5.5 by the way.

Image buttons are stored in the Captivate install folder under Gallery > Buttons.
If the buttons you're referring to are not standard Captivate buttons but were custom made by the original developer then he/she may be the only one that has them on their system.
After you add these image buttons to a project they are stored internally and cannot be 'extracted' per se, though you can usually copy buttons from one project to another if you have them both open. As you've found, once you move beyond a certain point, the copy/pasted process seems to break down.
If you can get in touch with the original developer, they may be able to provide you with the original button images. That would be your best solution.

Similar Messages

Image button disappears in pdf output

I have converted an image into a clickable button in Indesign, but the image button disappears in the pdf output.
I also noticed that while I was creating the button and in the Button and Foam menu the "appearance" eye icon is greyed out.
Can anybody help? Thanks!

It looks like you used InDesign CS6 (because you called it the Button and Form panel).
It's OK that the appearance eye icon was grayed out. Here's how it should look:
When you export, did you choose File > Export > PDF (Interactive)?

Lightroom 5.3 bug with export images

Hi,
I can't export single images in Lightroom anymore. When I choose an image including the watermark the system exports all the latest imported images, but not a single one. Can anyone help me with that?
-jo

in your lr5.2, click help>updates...
bug fixes:
Issues when upgrading catalog from previous versions of Lightroom.
Incorrect photos are displayed after switching away from a Publish Collection.
Catalog optimization did not finish, and was not optimizing the catalog
Feather of clone spots is set to 0 after upgrading catalog to Lightroom 5.
Auto White Balance settings are not saved to Snapshots.
Sony 18-55mm lens is detected as the Hasselblad 18-55mm lens for lens correction.
Increased Update Spot Removal history steps when in Before and After view.
Slideshows start playing automatically even when the Manual Slideshow option is enabled.
Video playback stops when dragging on the scrubber.
Errors when publishing photos to Flickr through the Publish Service.
Option + drag on Edit Pin behavior is functioning incorrectly.
Black border appears around the exported slideshow video.
Catalog containing images processed with PV2003 were adding a post-crop vignette when catalog upgraded to Lightroom 5.
Pressing the “Reset” button while holding down the Shift key caused Lightroom to exit abruptly.
Output Sharpening and Noise Reduction were not applied to exported images that were resized to less than 1/3 of the original image size.
The Esc key did not exit the slideshow after right clicking screen with mouse during slideshow playing.
Import dialog remained blank for folders that contain PNG files with XMP sidecars.
Metadata panel displayed incorrect information after modifying published photo. Please note that this only occurred when metadata was changed after the photo was published.

Setting "Services" for exporting images to web

In Bridge there is a setting when exporting images to social media that is called "services". I cannot seem to active this selection so that I can set up my pw and login to send images directly from Bridge. Can anyone help me set this up?
In Bridge I get a window called "Add Preset"
There are two tabs: Destination and Image Options
Under Destination I have the option to:
The <button> Export is highlighted but when I select it I get this error:
Export Error
     Please authenticate with Facebook before continuing
                                        <button> OK
Sign In To Facebook with a button that says Sign In.
When I click that I get the following Error:
Facebook Error
      An error occurred while request facebook connection.
      Facebook Error:
                                              <button> OK
I have no idea just what to do.

Maybe this one: http://www.kahrel.plus.com/indesign/batch_convert_cs3.html
Peter

Better control of the placement of the copyright notice in exported image

When exporting from Lightroom and enabling the copyright overlay, the placement of the copyright notice depends on the original orientation of the camera, making it possible to end up in the top right of the image. I would like it to always end up in the same corner of the actual exported image. Also, some control over the font and color would be nice!

Is sort of annoying. Not sure if it can be changed. I known when I download movies and put them in iTunes it tries to sync and I wait for it to try and I click the little X in the status window to stop it. Reason being, I want to first add the Artwork and set some other tags. Then I go hit the manual sync button.
I agree it is a bit of a pain.

"Save image" button of Camera Raw does not save JPEG with modifications made.

I am using Bridge CC to process my RAW images and make modifications to some JPEG images as well. I have no need to further alter images in Photoshop at the moment, so I do all modifications in Camera Raw. After altering my images, I then press the "save image" button at the left bottom corner of Camera Raw and choose the settings to save in JPEG. However, when I upload these JPEG images to a website or when I email them, the image is uploaded without the modifications I had done! It seems to me that Camera Raw is saving JPEGs the same way it does for RAW images, in a non-destructive manner, only attaching instructions for the images to be displayed properly on Photoshop. But when I save an image in JPEG, I expect the image to be saved entirely with the modifications I made while still keeping the original RAW file. What goes on then? What is Camera Raw doing and how do I get to save a modified image in JPEG with Camera Raw? Would you please explain?
Many thanks for your help,
Beza

Hi,
What version of camera raw and operating system are you using?

Exporting Images to a folder on the hard drive

I used to be able to export images to a selected folder on my hard-drive without having to identify the folder for every image.
Now when I export I need to select the folder on my hard-drive for each image even thought I'm going to process 50+ images for that folder.
What is wrong & how can i fix it?
Can anyone help?
I'm using Lightroom 5.

Thanks for the quick reply.
I just tried it again and it seems to be working....
If it happens again, will use export with previous.
I was exporting the normal way through the library but my sub-folder was on my hard-drive.
ChrystiaC
www.chrystiachudczak.com

RE: [iPlanet-JATO] image button handling

Hi Todd,
from what I have seen so far on the Project they are just buttons on
the page.
In the interim, I modified RequestHandlingViewBase.acceptsRequest() to
handle the matching of parameter and command child names.
from
if (request.getParameter(commands)!=null)
return getCommandChildNames()[i];
to
if (request.getParameter(commands[i])!=null ||
(request.getParameter(commands[i]+ ".x")!=null ))
return getCommandChildNames()[i];
This fixed the problem with the image buttons in our cases.
Kostas
-----Original Message-----
From: Todd Fast
Sent: 10/27/00 6:21 AM
Subject: Re: [iPlanet-JATO] image button handling
Hi Kostas--
I wanted to get some feedback on the known issue of the
handleXXXXRequest method not being fired for buttons which have
images, due to the the browser submitting
the pixel coordinates back to the server like this:
Page1.ImageButton1.x=...
Page1.ImageButton1.y=...
As the ND conversion project we are currently working on heavily uses
image buttons we would like to get and indication if and when a patch
is planned for this.
Our current work around is to remove the src attribute from the JATO
tags in the JSPs.We are currently working on getting this fixed. One question--what is
the
relative type of usage of image buttons in your project? Are they just
buttons on the page (view bean), or do they appear in tiled views as
well?
Todd
[email protected]
[Non-text portions of this message have been removed]

OK, here's what I'm trying to do: We have, like you said, a menu
page. The pages that it goes to and the number of links are all
variable and read from the database. In NetD we were able to create
URLs in the form
pgXYZ?SPIDERSESSION=abcd
so this is what I'm trying to replicate here. So the URL that works
is
pgContactUs?GXHC_GX_jst=fc7b7e61662d6164&GXHC_gx_session_id_=cc9c6dfa5
601afa7
which I interpreted to be the equivalent of the old Netd way. Our
javascript also loads other frames of the page in the same manner.
And I believe the URL-rewritten frame sources of a frameset look like
this too.
This all worked except for the timeout problem. In theory we could
rewrite all URLs to go to a handler, but that would be...
inconvenient.

Exporting Images and Clipping Paths

I ran into a problem exporting images the was previously reported by Ruvan Fernando on Jan 25, 2006, but nobody had responded, so I'm trying again...
I'm using the SDK to open images and then save them back out with different colorspaces, resolution, etc. When I have an image that has a clipping path in it, when it's saved, the clipping path is missing.
I am copying all the source image attributes to the destination image attributes.
Any help would be appreciated.

I tried dragging it, and it gave the original version.
At Share there are; Print, Email, Desktop, HomePage, .Mac Slides, Order prints, Send to iDVD, Burn Disk, Export
I tried Desktop and it put the current image do my wallpaper.

Help with exporting images

HI
I have recently shot a wedding with two bodies. Forgot to sync the bodies before hand and so left with images at massively different times. in lightroom i then changed to view by capture time and amended all the wrongly timed images. i am then left with all images in order and looking as i want. I then put them in a catalogue and a collection to be on the safe side and exported both. Whatever i do i see the exported images in my pictures in the same order they were in before i changed the capture time. i have tried to research this until im sick of it. I just cant figure out what is going wrong. Just tried to save to dvd instead and saved but again in the order pre correction? please help

Hi did that this morning . I'm viewing in the exported named file in a
folder on the mac ... I've tried re naming , sort by capture time but the
minute I export , the exported file looks just the same as before I made
the capute time amendments .
Thanks
Kim

HT4007 How do I export images from Aperture to my iPad Mini?

How do I export images from aperture to my iPad Mini?
Berndpeter

I am going to give it a try.
Greetings from Mexico!

How do I get a "transfer images" button to show up in the solution center?

How do I get a "transfer images" button to show up in the solution center for my officejet 6500 709a on XP?
Scan buttons are displayed and work, as does print.

What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

Export images to a directory structure based on a collection tree?

A question:
Will lightroom have the capability to export images to a directory structure which mirrors a collections logical structure?
The reason I ask this is that when I create websites using third party tools (eg, Jalbum) I typically generate a flash or HTML based site with an menu structure for navigating the images.
So, the image interface is not simply a "flat-file" display as per the templates in Lightroom beta.
To do this, with previous image management tools (eg, iMatch) I create a hierarchy of images based on the categories (or collections) that the images are assigned to, export the images in a folder tree reflecting their categories (or collection), then use, say, Jalbum, to generate the website with the menu tree reflecting the folders/images.
This is extremely useful for more complicated image websites with categories and a large no of images.
If this function was built into Lightroom I guess it would be in the export function such that the "write to folder" box could take an argument {collection name} which would create a folder tree reflecting the collections logical tree which is being exported.
Apologies if this topic has been raised previously. But this function is extremely useful if you are using third party html tools or simply building websites by hand.
Regards
Alistair

I started simmilar thread in Lightroom Feature Requests few months ago, but can't find it anymore since new forum version...
What I can suggest as a new feature is export to directory structure from collections or second option from keywords. Probably more usable and easier to implement would be from collections.
What I need it to export many photos to different directories pretty often, and this would be great help since I could arrange them in collections and collection sets. Then select collection set and export it in a manner that collection set would be main export directory, and each collection within the set would be exported to its own folder within main collection set export folder.
This would be much appreciated feature in near future
Thank you for great product by the way

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
Here is a screen shot of the error message:
Message was edited by: Joseph Costanza, Jr.

See here for a solution.

Adobe premiere elements 12 - how to create menu bar action for my inserted image button

adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme

forbemag
I do not think that I am completely focused into this completely, so let us see if the following is going to help.
You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
In view of all that
Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
Let me give you an example
If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
Thanks.
ATR
Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption.

Exporting image buttons

Similar Messages

Maybe you are looking for