Exporting image to burn in another program?

Hello all and Merry Christmas...
I have been told that it is possible to export a project as an image in order to burn it in a different program, for example to be able to change the recording speed if needed... Could someone tell me how to do it please?
Thanks a lot...

Well I am not sure... What I mean by image is similar as what you do when copying a dvd or cd with Nero to a file... you obtain an image/file of the dvd that you can burn to a blank DVD.... Would that be a XML file?
My goal is to take the project outside DVDSP since I need to specify a recording speed...

Similar Messages

  • Why can't I place an image from Photos into another program like InDesign?

    This was never an issue with iPhoto but I just discovered that I can't place an image into InDesign from Photos. Or any design program for that matter. I only seem to be able to access Photo Booth which is useless. Using Yosemite 10.10.3 and a new iMac.

    Maybe Adobe need to update their package - the media browser works just fine from Safari, Pages, etc  - same as it did previously with iPhoto and Aperture except now there is the addition of Photos
    Contact their support and see what they have to say
    Certainly the export work around is more trouble
    LN

  • Unable to open pdf that was exported as a pdf in another program - Pro was downloaded today

    I have tried opening a pdf that was exported in ArcGIS as a pdf and I get the following error, "There was an error processing a page. There was a problem reading this document (110)". I saw in another post that this error deals with font. When I go to the document propterties and the fonts tab, 0% of font information was gathered. Pdf's that were already exported will open fine. I even re-exported a document that was already exported (and worked fine), but I get the same error. The only thing different is, I am on a new computer where pro was just downloaded.
    Does anyone have advice to this problem? Thanks.

    Active X controls go back to IE1. The error you're seeing is "Control name not valid" that means an ActiveX control is not working properly with IE... regardless of version. 
    Turning off filtering usually solves this. Repairing IE might do it too.

  • Exporting Images - no burn to DVD/CD option

    Why when I export and look at my post processing options is the option to burn to a DVD/CD not presented to me? I have an internal CD/DVD read/ write in my laptop and an external DVD burner plugged into a USB port. Yet, no option to burn? Any ideas?
    BTW, I am working on a PC, XP OS, if that helps.
    Thank you very much.

    Lots of discussion about this in the past. Do a forum search for "export burn option" for ideas.

  • Exporting Images and Burning to CD

    Each time I export versions of an image, the new folder shows up on my hardrive. However, there is nothing contained in the folder. I've tried multiple times. Any advice??

    http://www.adobe.com/support/photoshopelements/ Tutorials & link to PDF

  • Why can't I burn my slide show to DVD in photoshop elements 13. Do I have to buy another program update .?

    Photo shop elements make a nice slide show but will not let me burn it to DVD which makes it useless to me.
    How do I get the photoshop slide show to burn in another program.?

    Thanks so much for your possible solution. If I can pull this off , I will no longer curse adobe PSE 13.
    I'm still a long was off to accomplish this goal but I will surely give it a try. H264 (mp4) is still Greek to me.

  • If exporting images for backup, to reimport into a clean aperture or other program, is it best to use 72 dpi or 300 dpi, or does it matter?

    If exporting images for backup, to reimport into a clean aperture or other program, is it better to use 72 dpi or 300 dpi, or does it matter?  I want the best quality for any future unforeseen use. 

    I am somewhat reluctant to answer your questions after Frank Caggiano's excellent advice, but I really do not like to leave the question open, for there will be many occasions when you will need to export images and to understand how it works.
    But please, follow Frank's advice, right now you do not need to worry about pixels and dpi. That is exactly what I meant, when I suggested to you to make sure you keep a copy of your Aperture Library and to back it up with all your other data, before you erase your disk for a clean reinstall.
    DPI revisited:
    So, is the dpi setting only for exporting to print?
    The dpi settings are necessary to define the size of a digital image, since pixels don't have any dimensions. And since you cannot print or display an image without knowing its width and height, you will need to specify dpi when you are printing or scanning.
    If I leave it at the default 72dpi will there be any problems getting quality prints in the future from jpeg versions exported with that setting?
    Not if you export with the original size - the maximum number of pixels available. That will ensure the maximum print quality.
    The dpi settings are required to export versions; versions are derived from the masters and new image files are computed. When you export masters you get a copy of the original file that already may have a dpi setting.
    If I choose "export masters", will aperture will export my masters just as they are? 
    yes, and  you may add IPICT data if you choose
    Pardon my thick skull--I'm an old dog trying to learn new tricks in this digital world!
    No apologies necessary, we were all beginners once
    Here is another example, maybe that helps a little:
    I exported an image (jpeg) with three different setting: export masters, a version with 72dpi, a version with 300dpi and inspected the files in Graphic Converter:
    The master was exported like this:
    Notice, the master had already dpi settings, although I did not specify any on export.
    The size is 51,48 cm x 38,61 cm.
    The 72 dpi Version has larger dimensions, but also 10 Megapixels.
    and here the 300 dpi version: smaller dimensions, same amount of pixels.

  • I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

    I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

    At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
    When editing in Photoshop just add a box or mark on the image, for your tests.
    - If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
    - If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

  • I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

  • ITunes says my CD Burner is in use by another program? Please help!

    Hey everyone,
    When I try to burn a cd in iTunes, it says my CD burner is already in use with another program...however, I'm only running iTunes. Any advice? Thanks so much for your time, I greatly appreciate it. Cheers, Tim

    I am having same problem. Was fine until I downloaded latest version. Now I get this error 99.9% of the time. Once in a blue moon though it actually lets me burn. Also, wont let me burn ANY cd from Nero or Explorer (says no disc inserted when it is) either- like its locked the cd writer for some reason. Happens if I just re-boot then go straight to itunes or Explorer with no other application loaded or not. Did not try to re-install as it DID let me burn 2 cds after a zillion attempts (with no obvious difference to the steps I used). Hope you can help. Can I undo this upgrade as I was fine before and now have things I want to save to cd? Any help gratefully appreciated, Alex

  • Need Help With Exporting EPS Files That Will Be Opened In Another Program

    I am trying to export some files from Illustrator in EPS format, to be used in another program called "Blufftitler". Their documentation is pretty sparse and doesn't go into much detail. It only mentions the following:
    "Limited support
    BluffTitler has limited EPS support. It only imports filled shapes built out of lines and curves from uncompressed, unoptimized EPS files."
    No matter what settings I try in Illustrator when exporting the EPS file, it won't open in Blufftitler, and keeps throwing me errors. I tried Choosing "Illustrator 3" as the format, and turning off the preview option. I also tried "expanding" the shape itself several times too. Is there some other way in Illustrator to just export a bare-bones EPS files without any extras or other stuff that might cause problems with other programs?
    The funny thing is, when I create EPS files with another program, such as Vector Magic, they work fine in Blufftitler - it just seems to have a problem with EPS files created in Illustrator specifically.
    Any help would be greatly appreciated, thanks in advance!

    The main problem is with BluffTitler is it doesn't have a very good eps handler as it can really only import eps files that are about 10k each and are not overly complex. If you look at all the sample .eps files that come with it, each one is about 1 or 2k each. A simple circle in Illustrator, even when saved as v3 without a preview, is around 258k. The reason for the larger file sizes is due to the extra things being saved in the file that aren't even on the page, such as brush presets and graphic styles. The sample .eps files that come with BluffTitler don't have these presets so the files are already smaller.
    Something you may want to try is to open up one of the sample eps files and use that file for your vector work but save the file with a new name. I found that by doing this I could get the files down to a much smaller size. You may also want to setup any vectors in Illustrator first, save them, and then open the files in InkScape, http://www.inkscape.org. From what I've read, InkScape can get you fairly small file sizes so it's something you should check out.

  • What does the message "Another program has control of HP imaging device mean"?  I get this when I am trying to scan.

    What does the message "another program ha control of HP imaging mean when I am trying to scan something. How do i correct it?

    You may need to ask HP. I had the same issue with a networked (via ethernet) home HP multi-function. Sometimes the only way to get it to scan was to completely disconnect it from the network and connect it to only one Mac with a USB cable. Even that did not alwatys work.
    Eventually, Apple started pushing out HP printer updates via Software Update. One of those finally made that error message to go away.
    So run Software Update and see it there are new drivers that Apple made avaialble.

  • Exporting IMovie to Flash Drive vie IDVD for Burning on Another Computer

    I have made a slide show in IMovie and since my computer can't burn a DVD, I would now like to export the IMovie to IDVD and then onto a flash drive so that I am able to burn on another computer (probably a PC). Which is the best format to put the movie in for export via flash drive and how can I create the appropriate file after transfering the IMovie to IDVD. There didn't seem to be an export or share option for me on IDVD. If someone could help with the steps after sending the IMovie to IDVD. Thank you.

    to finish editting it onto another computer*

  • A client is curious to see if I export HTML from Adobe Muse, will he be able to edit the HTML in another program?

    A client is curious to see if I export HTML from Adobe Muse, will he be able to edit the HTML in another program?

    Thank you. I thought so, but just wanted to confirm. I appreciate the feedback.
    -Joe

  • Since update to 10.6.8 can't export images from powerpoint and also other programs

    Ever since I updated my software to 10.6.8 I can't export images from Powerpoint or from a graphing software GraphPad Prism.  It's really frustrating.  I had no problems at all until this update. Is there any way to revert my version to the old OS 10.6?
    I can't work when I can't put images into illustrator!
    Thanks, AOH

    I just contacted Final Draft and they helped me with it. If you have FD and are going to upgrade an OS, Deactivate Final Draft first then re-activate it once the new OS is installed.

Maybe you are looking for

  • 802.1x EAP-PEAPv0 (MSCHAPV2) with computer authentication

    I am a network administrator at seven schools, and a few of these schools are now using 802.1x EAP-PEAPv0 (MSCHAPV2) with computer authentication  only, for wireless security.  We are a mixture of 2008 and 2003 (Windows Domain) servers running IAS or

  • Username with privilege level 15 bypass enable

    Hi experts, I guess I never really understand the authentication process on Cisco routers and devices lol. Anyway I want users with privilege level 15 to be put in the enable mode right away after login without having to type in "enable" command and

  • Universal social media uploader

    I am a photographer, so I publish a lot of content to the internet often. My primary sites are Facebook and Flickr, but not limited to by any means. I should note, I don't use iPhoto Bridge CS6 & Facebook/Flickr uploading doesn't work anymore. Last t

  • I don't know how to put a server name in in order to set up mail

    Aol is what I use for email but when FF asks me to fill in n ingoing & outgoing server, I don't know what I should type. I simply want to email a video and can't seem to access a mail account.

  • Apps to iTunes transfer

    Hi everyone, I'm new to the iPhone world and I recently downloaded a bunch of apps to my phone via the app store. It seems like I'll be having to get a replacement phone though, sadly, so I wanted to know if there's a way to save my apps from my phon