Exporting imovie problem to be solved!

Dear Support team,
I uploaded videos into imovie, because I assumed that I could from there convert it straight into Premiere or other editing software to edit.
However, when I export the imovie clips into a quicktime mp4 (ready to put into premiere), there is a frames per second problem - where the sound echoes, and the footage is completely jumpy and jittery. I use a panasonic camera with imovie '11. I understand that imovie '09 sometimes is uncompatibale with panasonic / cannon, but isn't imovie '11 different?
I would be delighted if you could help me solve my problem.
Thank you and kind regards,
Alexandra

For a bit of troubleshooting, if you have another charger and cord, give those a try. If the problem replicates then it could be the iPad, if it doesn't replicate then there is something with the cord or power brick (a likely culprit is the cord or the connector on the cord)
If you replicate it and that suggests that the issue is with the ipad, then I'd  have it checked out at your local apple store. THose 30 pin ports can go bad and the inconsistent charging could be a symptom.

Similar Messages

  • Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

    I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
    I don't know what to do any help would be greatly appreciated!
    By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    Free Space on Start-Up hard disk. How much ? (other disks do not count)
    AppleMan1958
    Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
    After you have optimized your Event, you should be able to Share with no problem.
    Lennart Thelander
    -108 mean you are running out of (free) RAM.
    Try restarting the computer just prior to sharing. That frees up RAM.
    from mynameisearl
    Final Entry
    Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
    The only work around I have found is to split the Original Project into two.
    What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
    What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
    This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
    Anyway - I hope all of the above at least proves useful for others.
    Good Luck

  • Exported iMovie audio out of sync by 1-2 secs?

    Hello,
    I actually have two questions that are sort of related (both dealing with odd audio glitches in the final exported iMovie):
    I just completed piecing together about 30 clips into a 55-minute movie. While I was watching the movie last night with my wife, I noticed that about halfway through something happened to the audio track and it was now about 1-2 seconds ahead of the video track (so, my wife would say something and 1-2 seconds later her lips would move...or you'd hear the car accelerate while the video of the car is standing still, and then the video would show the car accelerating about 1-2 seconds later). Any idea why this happened and how to fix it?
    Also, I went through the wave forms of all of the audio and reduced the volume to zero on audio portions that I didn't want in the final video (eg: certain people talking that I didn't want in the video). When I played the individual clip within iMovie, the zero-volume segment was perfectly in sync with the video. However, when I watched the main exported movie (that I mentioned above), the zero-volume section shifted. For instance, say that somebody on the video said the phrase, "Humpty Dumpty had a great fall". And let's say I found that section of audio and muted the words "Humpty Dumpty", but left the volume at normal level for "had a great fall". When I watched the final exported iMovie, the muted "window" (let's call it) shifted and I'd hear just "Humpty Dumpty...............fall"...iMovie somehow shifted the location of the zero-volume section to mute audio that I actually wanted, and allow audio that I didn't.
    Any ideas on either/both of these issues?
    I was wondering if, since I adjusted certain audio portions of all 30 film clips within the main movie, should I have exported all 38 clips seperately to "lock down" their audio. Then put them all back into iMovie and created the master movie from there. Would that make a difference?
    Thanks,
    Justin
    P.S. I'm using iMovie '11 (9.0.4)

    I have the same type of problem; same version of iMovie. Got my project done, it was perfect. Uploaded it to YouTube and MobileMe, both have the audio a bit behind the video. Went back to my project, and it is off now, too.
    I have no idea how to fix this, but my presentation is due in a few days. Help.

  • Mac Mini crashes when exporting imovie projects

    Hi.
    When I try to export imovie projects, my Mac Mini crashes. Not ever, just every two or three times.
    My system is 10.6.7 and imovie is 11. Can anyone help me? Thanks, I apologize for my bad English

    Thank you, I'll try!
    I hope you're right, because is boring to see out of the blue all the screen getting grey and the window that invites you to reboot, without hope... It happens, for example, after two or three succesful exporting projects, then I reboot and go on for another two or three projects and then again... I'm afraid it's a RAM problem, but I'll try to update system and software.
    Thank you again

  • PP CS5.5 FLV To MP4 Export Issues / Problems

    I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
    Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
    I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
    Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
    Jim

    What do you mean by a better routine?
    A better compression routine than H.264.
    Is the quality better than H.264?
    Yes.
    Does this use an MOV wrapper?
    Yes.
    Also, would it import correctly into PPro?
    Yes.
    we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
    I don't know anything about FCP.
    Sorry for all the questions, just want to get things right before diving into a new codec.
    It's harmless, and free.
    Download it and run some tests.

  • QuickTime problem or iMove problem?

    QuickTime or iMove problem?
    I have an iMac G5, 1,8 GHz, 1,25 GB RAM. Initially I had Tiger, now Leopard is installed. Playback from iMove is slow and the same applies any file played with QuickTime. There is a temporarily solution in iMovie: I connect my video camera (FireWire) and select to "play back the video project via my video camera". Then playback in iMovie becomes smooth. Now I can switch off the power on the camera and the playback remains smooth.
    Annoying! Any suggestion?

    How to solve this problem:
    http://www.macfixit.com/article.php?story=2008061714305657
    Problem solved.

  • When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

    When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

    I'm not sure I understand the question, is the message tone going more then once?
    Turn off repeat message alert here:
    settings > notifications > messages > repeat alert > never
    Some people have found this does not stop the repeat miessage tone,
    if you are one of those then I suggest you contact Apple:
    http://www.apple.com/feedback/iphone.html
    They may not respond, but hopefully will fix in uodate if enough people complain.

  • I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

  • TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    Greetings,
    Questions:
    1. What version of the Mac OS are you running (Apple > About this Mac)?
    2. What version of the iOS are you running (Settings > About)?
    3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
    4. Do other changes to synced information like Address Book content sync successfully back and forth?
    Based on your description it sounds like you have a 1 way sync issue.  Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
    Try:
    Backup your computer and iOS devices before doing anything else:
    http://support.apple.com/kb/HT1427
    http://support.apple.com/kb/ht1766
    Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
    Make separate backups of critical data:
    Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
    Backup your computer iCal: http://support.apple.com/kb/HT2966
    Reset syncing on your Mac: http://support.apple.com/kb/TS1627
    Reply back if that does not resolve your issue.
    Hope that helps.

  • My problem/Q not solved- how/what correct signal setting on the Macbook pro for ther PC config on Bravia defn

    Regrettably Shane mu Q/problem is not solved-how does one check the comptability of defn (1020x...) for the computer and Bracia?

    Don't know, I do know the TV has a higher refresh rate, check out SwitchResX online for more control options over HDMI.

  • TWO VERY TOUGH SUPPORT PROBLEMS FACED AND SOLVED IN REAL TIME

    pls any body post two very tough support problems faced and solved in real time.
    my id is: [email protected]

    Hi Priya.,
    For example client wants his customer legacy number in XD01 master data which is not there in Standard SAP.we can satisfy the requirement with USER EXIT
    2) If the client wants customer Phone number in the sales order we can use user exit to satify the requirement
    These are not provided in Standard SAP & we should work out on alternative way
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • What is command design pattern? what is the problem that it solves?

    Hi i have been reading few articles on command design pattern but was unable to understand what it is and what problem does it solve. As far as my understanding goes if there is a pre specified method in an object that could execute and perform the necessary activities then it is called as command design pattern. Why is it named as command design pattern, it is because in a shell we use commands to retrieve output. For example when we type "dir" in dos command prompt it returns the list of files. so here we have to remember a preexisting exe file named "dir" which does something when used. So here like we call it command because when "dir" is passed to the computers it returns something that is expected. may be the computer obeys the command issued and return something back. So like wise if there is a method that is defined as as the command, for example in struts framework the action class must have a method "execute()" which is called by the framework to execute the necessary action mapped to it. So if there is a predefined method like "execute" in struts then the object is said to be followed command design pattern. So what actually does it solve?
    What ever i have written is my understanding from the articles i have read about the design pattern. So kindly correct me if i am wrong. Help me understanding what actual problem does this pattern solves. Thanking you in advance.

    This is really off-topic for these forums. You might do better on StackOverflow.com. I'll just say that although the first Design Patterns book came as a revelation to me, it was more for (a) the nomenclature (decorator, factory, facade, etc) which is still with us and (b) about five of the original patterns, which told me things I didn't already know. I've never used any of the others, including Command, and the whole design patterns thing quickly degenerated into farce with what seemed like a sustained attempt to reduce the whole of computer science to design patterns, which really isn't the point. As an example, there is one in another book called Type Object, which is nothing but 3rd normal form, which can be defined roughly in a couple of sentences. This pattern went on for dozens of pages with a very artificial example. I wrote to the mailing list about it: 'Type Object considered hilarious'. I got a rude reply from the original author, which I guess I expected, but also an incredible response from the list owner, saying I should recast my objections in the form of a design pattern. That lost it for me. True story. Moral: don't take this religion, or any IT religion, too seriously. They come around every 18 months or so with the regularity of the next bit of Moore's Law. I've seen dozens of them come and go since 1971, all with something to say, all 90% nonsense.
    See here for a longer version of this incident.

  • I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times.

    I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times. What do I do?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • When i'm trying to opem Itunes, I get a message that I'm missing MSVCR80.dll on my computer. I have tryies to re-install Itunes, but the problem wasn't solved - what should I do?

    When i'm trying to opem Itunes, I get a message that I'm missing MSVCR80.dll on my computer. I have tryies to re-install Itunes, but the problem wasn't solved - what should I do?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99343)

  • My iphone 4s has stopped working the wifi, IOS 6.1.3, warranty ends,  my problem will be solved or if I have to fight in court to work this divice

    My iphone 4s has stopped working and the wifi warranty ends in 30 days, I spoke with Apple support in Brazil and all steps performed as the attendant handed me this afternoon. I want to know if my problem will be solved or if I have to fight in court to get what is rightfully mine and equipment that really works.
    Thanks, André Garzo

    I live in Brazil and ensuring the apple does not work here and the nearest town for a possible exchange of equipment is 150 miles away
    if the USA certainly already have a new device in hand
    tnk´s Templeton

Maybe you are looking for