Exporting/Importing customized rack settings' values - Soundbooth

Has anyone ever found a way to export your customized Soundbooth rack settings, like in the case where you'd be uninstalling Soundbooth from one machine to install it on another machine? Has anyone come across a way to export and then import your rack settings' values?
I tried one Adobe Tech Support rep's direction which was, "... copy the same folder [C:\Program Files\Adobe\Adobe Soundbooth CS5 folder] of the old setting and paste into the same settings. C:\Program Files\Adobe\Adobe Soundbooth CS5 folder". That resulted in a error on launch of Soundbooth, preventing Soundbooth from opening at all following the folder copy-over.
So has anyone had any better success externally saving your custom rack settings and then importing them to another instance of Soundbooth?
Thanks so much.

I forgot to mention the versions that I had.
Portal 3.0.6.6.5 ( from 9ias 1.0.2.0.1)
Oracle 817
on solaris 8.
Richard,
Thanks for that information. Do you know if
there is any quick workaround for the problem
that I described above which I can use until
the patch gets released?
null

Similar Messages

Exporting/importing custom library objects

Dear,
When we made custom objects for in our library. They are available to all environments on my laptop, but not on a different machine.
Is there any way to export/import these?
Kind regards,
Frederik-Jan.

Hello,
These things are stored locally on your machine.
Note: On tab Library in your LCD click right arrow to get the library menu, mark your components tab (you need to export), right arrow opens the menu where there is the "group properties..." item. Here there is a path on your harddrive. My problem is I cannot locate the path I can see here. So I have looked for a workaround.
Workaround: create a folder on your desktop. Create a component group in you Library in LCD (new tab). Go to properties of this new group, set the path to your new desktop folder. Go to the component tab where you have your custom components. Select them, use move to..., select the new component group/ desktop folder. After completing this, check the xfo files in your desktop folder. You can now send them to another machines.
Note: In the library "right-arrow-menu" there is the item "shared library location". You can use this to share the components among all the machines you need.
Regards, Otto

How to export & import customer table space from non-unicode to unicode sys

hello all,
I have performed a migration of Single code to Unicode system. -
(ECC 6.0 SR2)
After completion of export & import i have noticed there is one customer table space which is missing.
eg - PSAPABCD
I have checked in source system & noticed that Table space is created by customer & not maintained properly as required,
therefore it is not either exported or imported.
Please advice me how should i manage to export tablespace from Non - unicode system & import in Unicode.
Is there any work out.
Thanks & rgds,
-rahul

Hi Rahul,
please have a look at
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f9f37c-be11-2a10-3baf-d5d7de5fb78d
point 3) f. and g.
However in order to keep consistency I would highly recommend to export and import all tables at the same time.
Best regards,
Nils Buerckel
SAP AG

Is there a way to import custom equalizer settings to in iPod Touch?

Well, I use a custom equalizer setting on iTunes, and I was wondering if I could import it to my iTouch (3rd Gen, iOS4). Syncing it does not add my custom equalizer setting it to the lists, and I cannot find out how to mess with the equalizer settings on my iTouch. Any help would be loved! <3

Custom EQ's don't transfer to the iPod, sorry.

Uregent Requirement, related with export & import of internal table values

Hello All,
According to my requirement
I created a copy program(ZRSEIDOC2)   which is copy program of RSEIDOC2attached in T Code WE02.
and I created another program ZXXXXXX.
Now what I am trying to do is
1.     I am trying to export the final output table/internal table to program ZXXXXXX.
Export I_listedidc to memory id SID.
2.     In Program ZXXXXXX, I used to submit statement & import statement for output table/internal table.
Submit ZRSEIDOC2 using selection-screen 1000.
Import I_Listedidc to memory id SID.
Which give the automated way to find out the output i.e. status,process,.
My Question is..
Is I_listedidc right table/itab, which I am using my statement?
Do I am writing the code in a right way?

use:
Export I_listedidc to memory id 'SID'.
Submit ZRSEIDOC2 using selection-screen 1000.
Import I_Listedidc from memory id 'SID'.
A.

ITunes Cant import custom EQ settings to IPOD mini

I am decide to create custom EQ preset list, but after update this list can not import to IPOD.
Please tell me this is a bug or IPOD mini doesnt support this function?

Well it hasn't happened in the updates since the iPod was introduced, and it would be wrong of us to speculate.
If you would like to suggest this to Apple, use this link.
http://www.apple.com/feedback/ipod.html

Export/Import Router Settings

I have just purchased a new WRT300N router and would like to export/import all my settings from my WRT54G.
Does anyone know how this can be accomplished??
Thanks in advance for any assistance.

Not sure if you can import it to the new router. I never tried this one.
You may try saving the backed up file configuration. You can do this by:
1. If your wrt54g has a config management option under adminisration tab. Try it there. Under the config management, click on back up and save it in your drive. [dont change the file name].
2. Open the wrt300n setup page. Go to administration, click on restore configuration and browse for the backed up file. not sure if this works, I never heard of importing settings from a different versions/router.

Export/Import classification categories/values in PI 7.11 Service Registry

Hello,
We are currently using SAP PI 7.11 EhP3. I have created a number of custom classification entries in our PI Development environment's Service Registry, for use in classifying services within the Registry. I need to apply the same categories and values into the Service Registry of our Quality and Production environments. Is there any export/import capability enabling that capability in this version?
Thanks,
-- Chris

Hello Gourav,
Thank you for this information; it is very helpful.
However - the export appears to only include the entries in the namespace http://uddi.sap.com/classification. Since that is a protected namespace I am not able to create my custom classification values there. (I'm also going to assume that this namespace gets overwritten during system upgrades, so I would not want my custom values in it anyway.) Subsequently my custom values are in a separate namespace that does not seem to be included in the export process.
Is there a way to configure this export utility so that it retrieves the data from my namespace, rather than (or in addition to) the standard SAP namespace?
Thanks again,
-- Chris

Migration manager forgets to import custom IAC channel settings

it looks after "migrating settings" from 10.5.8 to 10.6 that the Migration manager forgets to import custom IAC channel settings.
cananybody tell me where they are stored and which files i would have to manually copy or do i have to re-create those IAC channels by hand?
thanks for any input...

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

Transfer Foreign Trade Export Import values in Purchase Order

Hello SRM brothers and sisters,
I have a question regarding the transfer of the Import/Export data (Foreign Trade) in the PO from SRM to ECC in the Classic Extended Scenario.
Basically, in the SRM BBP_ECS_PO_OUT_BADI -> BBP_B46B_PO_OUTBOUND method where we map all the values, I try to fill in the CT_BAPI_POEXPIMPITEM table with the item's Import/Export values.
The way this is done is:
if nothing exists in this CT_BAPI_POEXPIMPITEM table for the PO item, add an empty line and assign the following fields ( PO_ITEM, EXPORT_IMPORT_PROCEDURE, COUNTRYORI and COMM_CODE).
This is then sent to ECC via the RFC BBP_PO_INBOUND function module - and inside I know that it assigns the X-structure of Export/Import Item. It then calls the BAPI_PO_CREATE / BAPI_PO_CHANGE and in the debugger the values seem to be correct.
This all seems to be very nice, however when I take a look at the PO in ME23n, the values of the Import/Export data are not there! In table EIPO there is also nothing... As for error messages, nothing comes up either.
So, has this happened to anyone? Am I doing something wrong? Is there an extra step I should do (ie, fill another structure/table/field)?
Cheers,
Adi

Hi Kishor,
Thanks for your reply.I need to some more inputs if you can...
As you mention :-You need to enter the special UOM according to the specifications in the index of goods or foreign trade statistics: can you give a example to get more clarification.and how Qtys. are converted to this unit for the export declaration.
You mentionwd : (FOr each item, you have to enter the amount of the unit of measure determined
in the index of goods. Eg: number of units) -can u explain with example. what is index of Goods.
Thanks in adavance.
Thank you.
Regards
Amar

How do you produce both Customs Export & Import documentation in an STO?

Hello All -
How do you produce both Customs Export & Import documentation in an STO scenario? For instance, if a company would like to create a STO in SAP to move materials from one plant to another and would like to produce both the Export & Import paperwork in GTS, what documents would be needed in R/3 to make this possible?
Would the following be needed, or is there some other way?
- STO
- Outbound Delivery & F8 Invoice to generate the Customs Shipment in GTS for the Export documentation
- Inbound Delivery to generate the Customs Declaration in GTS for the Import documentation

Thanks Sameer -
Yes, for the Import documentation, I think we will be declaring prior to Goods Receipt, so we will first use the Inbound delivery, and then the GR document later on once the materials have been received. (I believe you and I were talking about some of this in another thread actually.) Thank you for confirming this.
As for the Note, I have also seen this - but thought that this was to more or less give visibility to the sending plant up-front at STO of what export licenses might be needed. (According to the note, currently they would only be able to check if licenses were needed at the outbound delivery, and not on the PO)
Per the note: "Given a Stock Transport Purchase Order scenario: Plant A in Germany issues a STO PO against vendor plant US10 in the US. GTS looks at the PO in terms of importing from the US (departure country) coming into Plant A in Germany and performs compliance checks. Meanwhile, exporting plant US10 only has visibility at outbound delivery creation to see if am Export License is needed. Exporting plant US10 may want to know if they need a license to the country of destination, in this case Germany, at STO PO creation."
However with the proper country-level export/import activation of the legal regulations, I believe that you can still have the STO check export-related licenses even though it is mapped to GTS as IMPORD. I have done some testing on this and it appears to work (you just need to ensure that you are activating the relevant countries for export/import properly in the legal regulation, and you can have both export & import documents check the same legal regulation and deliver the correct license determination). I was just wondering if you had any experience with this that was contrary to what I have found, or if there is something you think I am missing..
Thanks

Table Values in Export/Import/Tables RFC calls

Hi
I know that using Adaptive RFC, the best practice is to use the Tables section of the function rather than the import/export.
However, in ECC6.0, when creating entries in the Tables section of the FM it tells me that this section is obsolete.
Should I start to use the export/import parameters instead?
Cheers
Ian

Hi Ashu
Thanks for the reply but there is no code snippet. It is a 'best practice' question.
The document <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de">Effective Web Dynpro - Adaptive RFC</a> details that table values should not be passed in the exporting/importing parameters of the R/3 RFC enabled function module. THey should always be added to the Tables section.
However, in ECC6.0, when adding entries into the Tables section of an R/3 function module, it says that this practice is obsolete.
Therefore, what is the current best practice for Adaptive RFC??
Cheers
Ian

Exporting/importing compressor settings

I have a number of render settings in FCP which I would like to share with another FCP user who has a separate license and machine. Is the a way to export/import these to another copy of FCP?
Pedro

You write of 'FCP render settings,' yet you've posted this in the Compressor forum so I'll go ahead an assume that you meant Compressor presets that you've created (the stuff in the User folder of the Settings window).
If that is correct, those presets are found in /Users/pedroparamo/Library/Application Support/Compressor, for instance. They'll be .setting files, or in the case of grouped presets, those folders that are not aliases (aka they do not have the little arrow in the corner).
If you need just one setting, select it in the Settings window and drag it to your desktop. That'll make a copy of the choosen setting.
Make sure you compress/archive what you're sending, then attach to an email.
Or did you mean something related to FCP?

Upgrading/installing ColdFusion 10 from ver 9 (export/import settings)

To start, I am not a ColdFusion admin, just a systems admin. I have gone through a few CF upgrades over the years, but have been in place. We are looking at moving to CF10, and since it is a now Tomcat, it is a new install. I am lookign for how to export jobs, data sources, settings, etc. from the CF9 server when we are not enterprise (so I cannot export a CAR file). I have looked onlione, but eveythign pionts to the enterpise export. Any thoughts?

Can you have 5min downtime? You can just remove the "standard" licence, which will revert it to "developer edition" which does allow CAR file exports. Then put the licence back on again ;-)
Adam

How to export and import custome functions...

Hi Biddies,
I am wondering is there any way the custome functions in an existed report can be exported.
If there is, how can I do it?
For example, "Custome Functions.rpt", which was distributed with Crystal Reports, has a custome function library. How can I export it from the report?
Thanks
Edited by: Jonas sun on Mar 18, 2009 7:13 AM

Hi,
Did you try exporting it ?
What format you are using to export it .
As I have seen you can export the custom functions contained report.
I had done it in pdf format for your references go to sample report folder
select featured example report folder in that open custom function report and export it to pdf format.
The report will exported with the field data of custom function.
Is this answer you wanted ? if not please explain me bit further.
Regards,
Neo.

Exporting/Importing customized rack settings' values - Soundbooth

Similar Messages

Maybe you are looking for