Exporting in FCPX using quicktime compressor I get this error.

what is this error I am going to show you guys a screen capture.
I am using the share/export using compressor settings.

This error generally means that there's something on your timeline that FCPX doesn't like such as a corrupt clip, unusual codec, a DRM-protected audio track, CMYK image, etc.
From Crash Analyzer:
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
Suggested Actions
If you are using Final Cut Pro 7 and your sequence codec is set to a long-GOP codec such as HDV, H.264, XDCAM, AVCHD or MPEG-2, set your sequence codec to ProRes.
For best results, convert all long-GOP media to ProRes.
Make sure all images are RGB, not CMYK.
Ensure all images are less than 4000 pixels in width and height.
Use Corrupt Clip Finder to locate the corrupt clip.
After the corrupt file is located, use QT Repair or Media Salvage to fix it.
Make sure your files do not have Digital Rights Management (DRM) that prevent them being played outside of their intended application. Some files purchased from the iTunes Store will have DRM.
Make sure you are using AIFF or WAV audio files.
This can sometimes be caused by third-party codecs. Use System Toolkit to temporarily disable them.
More Information
System description for error -50: Error in user parameter list
Report generated by Crash Analyzer in Pro Maintenance Tools

Similar Messages

HT201210 Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

When i try to export a video in FCPX 10.0.3 i get this error message

When I try to export a edited video in FCPX I get this error message....
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
Any one know how i can export please? What and why am I getting this message.

You have to update the software.

HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

Whenever I use facebook I'm getting this error message [Java Script Application] Error: options is undefined whenever I click on a link. What can I do to fix this problem? Easy step by step instructions please.

When I use facebook, I keep getting this message [Java Script Application] Error: options is undefined whenever I try to return something, click on a link, or message, open a game, etc. ... I have Windows 7, addons of greasemonkey and better facebook (which seems to have disappeared)
== URL of affected sites ==
http://www.facebook.com/reqs.php#!/?ref=home

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

When using Craigslist I keep getting this error: Warning! Domain mapping upgrade for this domain not found. Nothing I do works to fix this.

When I use Craigslist, my personal list of things being sold, and I try and renew my listings, I periodically get this: "Warning! Domain mapping upgrade for this domain not found. Please log in and go to the Domains Upgrades page of your blog to use this domain." Usually rebooting my computer makes it go away for a short time, but today that isn't working and following the commands on the warning doesn't work either...is this truly a firefox issue? How do I fix it.

Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

No matter the website or browser i use. I keep getting this error message when trying to play any video. 'the adobe flash plug in has crashed' I had had theis prolbem well over a month, i have updated flash player and firefox. no change.

I have sent nearly a hundred crash reports. no change. adobe want money with no guarantee it can fix the problem. no matter the browser or website. the video never plays. I have update virus and anti-spam software. no other error message than the unhappy lego brick with error message stating adobe flash plug in has crashed. I have place a -1 in delay or some config in adobe. No change.

Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101    Tips & Tricks
See if this kb helps:   http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM.   Post back and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Have updated to F.F.6 I am still getting this error evertime I use it. Message: [Javascript Application] TypeError: Components.classes[@softage.ru/skype/SkypeFfExtension;1'] is undefined - HELP

Every time I use F.F. I get this error. TypeError: Components.classes['@softage.ru/skype/SkypeFfExtension;1'] is undefined
Does anyone else get this and or know how to remove it?
Many thanks for your help and support

This issue is caused by the Skype extension for Firefox.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

How can I use QuickTime SDK to get Compress format of Video stream?

I can get uncompress video stream like this:
QDerr = NewGWorldFromPtr( &m_hGWorld, k32BGRAPixelFormat, &rcMac,
NULL, NULL, 0, (char*)m_pVideoBuffer,
m_sAVFileInfo.sResInfo.ulWidth*4);
then the m_pVideoBuffer is uncompress video stream. How can I use QuickTime SDK to get Compress format of Video stream? I could change "k32BGRAPixelFormat" to other format,use other API or something?
Could someone have the method? Best Wishes!

Firefox, I would make sure you update your Desktop to Firefox 14.0.1, as the version you are running is quite old and out of date.
Then, do you have your Sync Recovery key, username and password? If you do, you can re-add Firefox Sync to your computer.

I am using CS6. When exporting layers to files in Scripts, I get an error message Error 519: Server

I am using CS6. When exporting layers to files in Scripts, I get an error message Error 519: Server Interface error. 'No component returned from CreateWidget'

Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.

How Long to Export 1080i Sequence using Quicktime?

I just received my first HD footage from a client to transfer to DVD using iDVD. I'm wondering what other people have experienced exporting 1080i footage using Quicktime (as a reference file - not self contained). My sequence is 1.5 hours long.
I first tried to export it using Apple Intermediate Codec 1080i60 and it said it would take over 40 hours! After reading some other posts, I looked at the sequence settings and changed something (field dominance perhaps?) from Upper to None. This has brought the time down to a mere 9 hours!
Is this time normal for exporting such a long movie? I want to know so I can budget time into future projects!
Thanks. Sorry to appear such a novice, but its my first foray into this type of footage!
Jenny

This project was on a Dual 2 GHz Power PC G5 with 6 gigs of RAM. The whole thing finally finished -- but, wow, I was not prepared for a 9 hour export (which, in reality, turned out to be about 5 hours).
Thanks for any feedback you can provide on processing times.
Jenny

I can't export and get this error message...

So I've been working on a video project for several weeks now... but when I go to export the file to any format, or site like Facebook, Vimeo, Youtube, etc I get this error message...
(com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
I have no idea what it means or how to fix it. I tried just googling some answers but no luck. Anyone here able to help?
Cheers

If you are using the original version 10.0 with Mavericks then you simply update to the newer FCP X 10.1.1.
Be aware that this new version is very different in some ways particularly with the way media is managed.
There is now the Library method of storing Projects and Events within Libraries.
Older Projects and Events require an internal FCP X UPDATE process.
See here for the basics:
FCP X setup
Al

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

I'm trying to export a list to Excel and I'm getting this error: "unable to download owssvr.dll"

Hi,
Help, please.
I’m trying to export a list to Excel and I’m getting this error: "unable to download owssvr.dll"
Thanks in advanced.

Hi,
According to your post, my understanding is that you got the error "unable to download owssvr.dll" when exporting a list to Excel.
owssvr.dll is the module given by Microsoft to read the data from SharePoint Lists using remote procedure call.
You can find the OWSSVR.DLL in SharePoint 2010 Server Physical Path: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI.
Please check whether it exists in SharePoint 2010 Server Physical Path.
Please check whether you export a list to Excel correctly.
Generally, the issue is caused by the brower. Please reset the IE to check whether it works.
In addition, you can repair the Office to check whether it works.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5f471d53-e980-4acc-a6cb-7c8722571ec0/problem-with-export-to-spreadsheet?forum=sharepointgenerallegacy
More information:
SharePoint RPC Protocols Examples Using OWSSVR.DLL
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Exporting in FCPX using quicktime compressor I get this error.

Similar Messages

Maybe you are looking for