Exporting in Premiere Pro with a GTX 980 CUDA takes 4 hours

Okay, this problem has been plaguing me ever since I upgraded to a new PC with some very high end hardware. I'm trying to export a 25 minute h.264 encoded mp4 file from an AVI video and PCM audio source, however, exporting it using YouTube 1080p preset takes over 4 hours. This used to never happen before, even on my old laptop which had a GTX 675M card and would take 1.5 hours at most.
The source files I use through video capture is AVI with MPEG-1(VBR) 1920x1080 resolution with 29.97 frames/second. The audio source is PCM WAV 48.0KHz stereo.
The preset I have for exporting in Premiere Pro/AME CC 2014 is:
video: h.264 format, 1.0 square pixel, 29.97 frames/second, Progressive scan
bitrate: VBR(1 pass), target/max: 8.0 Mbps
audio: AAC 192kbps, 48kHz stereo
The hardware I am using is a Gigabyte x99 ud-4 motherboard with G.Skill Ripjaws 16GB DDR4 2400Mhz RAM, i7-5820K CPU 3.30 GHz, Windows 7 64bit OS, with an Nvidia GTX 980 card with CUDA enabled in both Premiere and the Nvidia Control Panel. Yet, I am still getting over 4 hours rendering time during my exports for a 20-30min video source? I am completely stumped on this and it's unbelievably frustrating to see my top of the line system take so long to render this file when my 2-3 year old laptop did the export in 1/3rd of that time? I do this as a hobbyist and any help on trying to get this fixed would be a major help to me. Thank you in advance!

Hmmm...
I did a quick test in your behalf with a test project with and without "alpha glow" applied to all of the media.
The results were actually kind of strange:
- export to .mp4 utilized all cores (6-core box w/ Hyperthreads) with a smooth 82% utilization for the whole export; memory usage (also from task manager) went up and once it hit a maximum, it stayed there
- export to .mp4 with "alpha glow" applied -> CPU usage started out pretty good, then memory usage maxed out and then actually cam down; after a bit, the CPU usage stabilized at around 22%, or about 25% of what it had been at the start of the export
Smells to me like an Adobe bug or design-flaw.
Anyway, good luck with your testing.
I totally agree with Bill's suggest to do a full PPBM7 test on your new rig and report the scores back here - and to the PPBM7 site of course. This will help you to have confidence in your new hardware and setup. Once your hardware and configuration (for Win7, drive caching, Premiere settings, etc.) are working fine, then your particular workflow, etc. can be a separate troubleshooting step.
Good luck!
Regards,
Jim

Similar Messages

My computer crashes when I export from Premiere Pro cc.? Also, is there a known problem with Panasonic HC-V720 footage?

Why does my computer crash when I try to export from Premiere Pro cc? Also, is there a known problem with footage from Panasonic Hc-v720?@

Ask in http://forums.adobe.com/community/premiere/content
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

After Effects export as Premiere Pro project weird PAL/NTSC problem

This post is not a question. It's here, because I've found a solution and want to share with You.
I've noticed a strange problem during export from AE to PR.
Ok, here I go.
AE = After Effects CS3
PR = Premiere Pro CS3
My AE project is D1/DV PAL Widescreen. It is a sequence of slideshow with some video effects applied. I needed that sequence in PR. I was happy to find a new feature - export as premiere pro project (new for me - i am pretty rookie ;). Thaks to this feature I have saved most of my disk space that is always to low. But, like every first try, this one was not perfect too. I had two problems.
Problem no 1.
I opened exported project in PR and saw message like "video effect AE.CC COMPOSITE not present".
Whole composition was working perfectly except that one video effect that was fundamental for this project.
*Solution was as easy as it can be. I've just copied that effect from AE plugin folder to PR plugin folder. It worked for this.
Problem no 2
Like says AE Help "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences."
Project settings in PR was exactly D1/DV PAL Widescreen. So where is the problem You ask?
Therefore why my Timeline works in NTSC 29,97 frame rate if all settings match PAL 25 frame rate?! I don't know.
*Solution to fix this annoying bug is to create a new project in PR with all settings for D1/DV PAL Widescreen in this case. Than just import that PR project exported from AE. Now timeline works like it should in PAL frame rate.
That's it.
I hope this post is helpful, because I didn't find any answer for this here in Adobe forum.
Adam

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Exporting from Premiere Pro CC 2014

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

Hi Maruf,
Maruf Noyoft wrote:
Kevin,
I reset as you suggested and it took care of it.
Great!
Maruf Noyoft wrote:
So, if you don't mind explaining me the cause of the problem that I had? Or
an article about it. It is just for me for getting to know better the program and the system.
Thank you very much and appreciate your help enormously.
Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
Thanks,
Kevin

Green Line on right side of exported video Premiere Pro

Hi, when I export my footage I am seeing a slight green line on the right edge of the frame, no matter the media player and is visible as well on youtube and vimeo uploads. I am making sure it is exported at 1280x720 as that is the aspect ratio I am recording at on my GH2. The GH2 are avchd files or .mts files natively, so when I import them I convert them using Adobe Media Encoder set to ProRes 720 60fps. This green line does not occur on every clip when I export, just the majority of them. I am also using Premiere Pro CC 2014 with the latest version updated. Please help!

Yes looks very similar to what I am getting with the cube transition.
It is probably something to do with the MPE and Direct X or Acc Graphics used to process the clips during the transition, only a guess for a non programmer like myself lol.
Yes, bet it is one of those bugs that has slipped through, when viewing as a screen shot it is hard to see it at stop so possible more so even in motion, but yes it is there and as I posted in my other thread, I am seeing it also, I am not green screening neither.
As say, for TV's then probably 99% of the time it will be hidden in the overscan area but for some and for Web Based viewing, I as you, would rather it not be there.
As say it is kinda like the feature in EDIUS Called enable transition handling in over scan, where the default for a new project is set at 3%.
Anyway, I have kinda solved my problem with the cube spin transition by subscribing to Red Giant Universe at $10 a month, they have a nice set of transitions that work well in premiere Pro CC, I am currently on version 8.0.1. Though I do plan on upgrading as and when to the newest one 8.0.2. Though doubt that the original issue has been fixed, but for now, I am using Red Giant.
FInally, I notice that if I click on the settings box in Red Giant Transitions, then it crashes Premiere Pro with this message, so I avoid doing that, but still work mentioning, probably should put this into a fresh post of submit bug report, I will also contact Red Giant to make them aware of it also.
Premiere Pro has encountered an error
[..\..\Scr\AESupport.cpp-86]
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Pro.exe
Application Version:    8.1.0.81
Application Timestamp:    5426694c
Fault Module Name:    MSVCR110.dll
Fault Module Version:    11.0.51106.1
Fault Module Timestamp:    5098826e
Exception Code:    40000015
Exception Offset:    00000000000740da
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    2057
Additional Information 1:    9bca
Additional Information 2:    9bca88f85e8c36e7d86179cefb863392
Additional Information 3:    e5c7
Additional Information 4:    e5c75cdca8ef833efce9f20f61f3f27a
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Losing audio quality when exporting from premiere pro

I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems. Let me know if I need to do screen shots I really want to figure this out.
Thanks for your help!

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

Export to Premiere Pro from Audition has stopped working...

Hello guys,
When I've finished an edit in Premiere I send it to Audition via Edit>Edit in Adobe Auditoin>Sequence.
But when I've finished in Audition and try to send it back via Multitrack>Export to Premiere Pro (sent as each track as a stem), Audition processes the session and then tries to send it back to Premiere.
The screen jumps back to Premiere as usual, but instead of seaing the pop-up window to insert new tracks as it should do, nothing happens. I've ran lots of tests to see what is going wrong, and can't find it. Somewhere on the journey into Premiere, the process stops and I really, really liked this feature.
Can anybody shed some light on why this has suddenly stopped working? I have made no changes to the installation of either Premiere or Audition, and neither have any plug-ins or extras.
Hope you can help,
Thanks

Hi,
I have the same problem to import files from audition. It save the work in .xml what I can load in premiere but automaticly it will not work.

Exporting from Premiere Pro into Story

Can the metadata etc be exported from Premiere Pro into Story.
For example in the process of roughing out a documentary idea I'm shooting clips and making subclips in bins and developing sequences in this rough style. It would be useful to document this in Adobe Story if such an interface exists thanks...
Many thanks

The closest I can find is here:
http://helpx.adobe.com/story/help/workflow-movies-script.html
Seems like there is a semi-manual solotion ... has anyone used this reverse workflow in anger I wonder and can describe their experience, the results and the potential?

Export to Premiere Pro

Hi all experts,
If I do an export to Adobe Premiere Pro:
1) Will it be rendered in Adobe Premiere Pro or Adobe After Effects ?
2) How I do I import the file in from Adobe Premiere Pro ? Just like importing a picture or video ?
3) I am thinking if I use Premiere Pro instead of Final Cut, will it cut down on input and output time ?
Thanks

After Effects always uses the AE Render engine to render files. If you export to Premiere Pro and then close AE the Render engine will open in the background to render from inside PPro. Dynamic link is similar to round tripping to motion from FCP. Personally, for most projects that require AE work I think the AE/Premiere workflow is faster than the FCP/AE workflow. Sometimes though, depending on the project, I'll use Automatic Duck to bring FCP elements into AE for FX work.
Hope this helps.

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

I used the CC Snowfall, but when I export to Premiere Pro it shows up as a grey background? Help!?

I used the CC Snowfall to create a snow effect for my video, once I export into Premiere Pro it just shows up as a grey background?

We can't tell what's wrong from your description. A nice screen shot of your AE project will be very helpful. Of particular interest: the effects pane for the snowfall effect.

Sending transcoded clip to Premiere Pro with Mono audio

Hi there,
I noted that others had asked this question around August 2013 but haven't seen any progress made on this issue, which is that we prefer to edit in Premiere pro with mono audio tracks, but we are unable to make transcoded material come over from Prelude with mono audio.
We need to have total control over our audio tracks and for us in a News/ENG environment that also means fast turnaround production. So we want to choose the part of the XDCAM clip that we want in Prelude, send it to Premiere Pro and put the interview grab (for example) down on track 1 of the Timeline with only talent mike audio (which was recorded on the camera's channel 1) and not have to pan it or worry about doing much else to it. Then we cut the rest of the overlay with sound effects that were recorded on channel 2 going straight to track 2 on the timeline. When we transmit it to head office we send them two discrete channels of audio: talent/VO on Track 1 and effects on Track 2.
We only have a problem when Transcoding is involved. With the audio prefs in PrPro set to "Mono" everything else is fine, its just that when Prelude transcodes a video it makes the audio a hassle for us, because it can only come over to PrPro as a stereo audio track.
Adobe, is there ever going to be the ability to just make a Preference in Prelude to send the clips with Mono audio, as there is in Premiere Pro??
Or has anyone figured this out and I am just missing something?

In Adobe Media Encoder, set up a new preset that has the video and audio settings you want to have your source footage transcoded to:
Then name and save that preset. The next time you launch Prelude, the preset will be an option for you to select to use for transcoding your material.
MtD

How can i buy Adobe Premiere Pro With the student discount but in one payment?

i want to buy adobe premiere pro with a student discount but i dont want to have to make multiple payments, how can i do this?

CS6 Education https://forums.adobe.com/thread/1585740 is pay once, own forever... IF you can use 3 year old software
Otherwise, the current version is by subscription only... which means that when you stop paying, the software stops working
Adobe Education... Start here https://creative.adobe.com/join/edu
Education Plan https://creative.adobe.com/plans?plan=edu
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html

File Export Adobe Premiere Pro Project

Which script (a line of code, probably) implements this menu item: File>Export>Adobe Premiere Pro Project?

This may be helpful:
http://aenhancers.com/viewtopic.php?f=8&t=889
Mind that even when you can activate a menu command by this method you may not be able to control the resulting dialog via scripting. That's one of the reasons why this method of accessing commands isn't published.
If there's a function in After Effects that you'd like scripting access for, feel free to send us a feature request (yes, they do get looked at!):
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Exporting in Premiere Pro with a GTX 980 CUDA takes 4 hours

Similar Messages

Maybe you are looking for