Exporting internal table in a oops

hi friends,
I have to pass internal table to a method and export that internal table.
now when i am passing this internal table i am getting the last value of the table..
i am enclosing code here please go through and modify me regarding this..
REPORT ZTEST_ABAP_PROXY.
DATA PRXY TYPE REF TO ZCO_MI_PROXY_OUTBOUND.
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,
ERNAM LIKE MARA-ERNAM,
END OF I_MARA.
CREATE OBJECT PRXY.
DATA IT TYPE ZMT_PROXY_OUTBOUND OCCURS 0 WITH HEADER LINE.
TRY.
    SELECT MATNR ERNAM INTO TABLE I_MARA FROM MARA UP TO 10 ROWS.
    LOOP AT I_MARA.
      IT-MT_PROXY_OUTBOUND-MATNR = I_MARA-MATNR.
      IT-MT_PROXY_OUTBOUND-ERNAM = I_MARA-ERNAM.
      APPEND IT.
    ENDLOOP.
    CALL METHOD PRXY->EXECUTE_ASYNCHRONOUS
      EXPORTING
        OUTPUT = IT.
    COMMIT WORK.
CATCH CX_AI_SYSTEM_FAULT .
    DATA FAULT TYPE REF TO CX_AI_SYSTEM_FAULT .
    CREATE OBJECT FAULT.
    WRITE :/ FAULT->ERRORTEXT.
ENDTRY.
i need to pass all the values of internal table to output at once..
Thanks and Regards
Vijay

Hi Vijay,
I think the problem is with the output parameter.
Might be I'll give you the background and then explain you the problem. This may help.
In the older release of ABAP there used to be Tables as one of the tabs where one could import/export tables to/from the FM. The problem was that it would difficult to identify what table are being imported and what are bein exported.
So with later releases of ABAP this tab was removed and currently there are Exporting/Importing/Changing tabs. You can use changing in your case if you are passing the table to modify the same.
Now the problem.
As stated above the OUTPUT is a line type (means structure) while IT is a internal table with header lines. So the record in the wa of this table is only transferred to OUTPUT.
What needs to be done.
You need to change the type of the OUTPUT to table type. I am not sure if you know about table type.
You can create a Table Type is se11 under Data Type.
I hope this helps.
Regards,
Saurabh

Similar Messages

Problem while exporting internal table to memory id using EXPORT

Hi friends,
Iam facing a following problem.
I have 4 line items in my va01 tcode.
now when i give material number and quantity and hit enter the processing for that line item starts.
iam moving that current line item to a internal table lt_vbap in userexit_check_vbap.
now for the 2nd line item also i have to move to internal table lt_vbap.
but my problem is that in internal table lt_vbap iam not getting all the line items.
every time the current line item is being processed the the previous line items are being refreshed.
from lt_vbap internal table.
how can i export internal table.
code
move vbap to lt_vbap.
append lt_vbap.
export lt_vbap to memory id 'ZXYZ'.

>
Prakash Pandey wrote:
> Hi Priyanka,
>
> The internal table lt_vbap will always be empty unless you import it from the Memory ID (in your case ZXYX).
>
> Use the code this way:
>
> IMPORT lt_vbap FROM MEMORY ID 'ZXYX'.
>
> move vbap to lt_vbap.
>
> append lt_vbap.
>
> export lt_vbap to memory id 'ZXYZ'.
>
> Regards,
> Prakash Pandey
The memory id shud be same in both cases

Export INTERNAL TABLE to shared buffer

Hi all,
My requirement:
Export INTERNAL TABLE to shared buffer or SAP Memory.
Any help will be appreciated.
Can SET/GET parameter be adopted for internal tables?
Thanks,
Tabraiz

EXPORT (OBJ_TAB) TO MEMORY ID 'ABCD'
also refer to
http://help.sap.com/saphelp_45b/helpdata/en/34/8e73a36df74873e10000009b38f9b8/content.htm

Import/export internal tabl

Hi,
This is regarding import/export internal table to 2 different prog, somehow when i execute in prog ztest_hl7, it doesnt work. Please help.
report ztest_hl7.
TYPES:
BEGIN OF tab_type,
para TYPE string,
dobj TYPE string,
END OF tab_type.
DATA:
id TYPE c LENGTH 10 VALUE 'TEXTS',
text1 TYPE string VALUE `IKE`,
text2 TYPE string VALUE `TINA`,
line TYPE tab_type,
itab TYPE STANDARD TABLE OF tab_type.
line-para = 'P1'.
line-dobj = 'TEXT1'.
APPEND line TO itab.
line-para = 'P2'.
line-dobj = 'TEXT2'.
APPEND line TO itab.
EXPORT itab TO MEMORY ID id.
submit ztest_hl6 and return.
report ztest_hl6.
data : id TYPE c LENGTH 10 VALUE 'TEXTS'.
TYPES:
BEGIN OF tab_type,
para TYPE string,
dobj TYPE string,
END OF tab_type.
DATA: itab TYPE STANDARD TABLE OF tab_type,
wa_itab type tab_type.
IMPORT itab FROM MEMORY ID id.
loop at itab into wa_itab.
write:
wa_itab-para,
wa_itab-dobj.
endloop.
Edited by: Hui Leng Yeoh on Jun 26, 2008 11:25 AM

Hi There are few syntax errors. Comment ur code and Paste this code and check. It is working fine.
report ztest_hl7.
TYPES:
BEGIN OF tab_type,
para TYPE string,
dobj TYPE string,
END OF tab_type.
DATA:
id(10) TYPE c VALUE 'TEXTS',
text1 TYPE string, " VALUE `IKE`,
text2 TYPE string, " VALUE `TINA`,
line TYPE tab_type,
itab TYPE STANDARD TABLE OF tab_type.
text1 = 'IKE'.
text2 = 'TINA'.
line-para = 'P1'.
line-dobj = 'TEXT1'.
APPEND line TO itab.
line-para = 'P2'.
line-dobj = 'TEXT2'.
APPEND line TO itab.
EXPORT itab TO MEMORY ID id.
SUBMIT z7569411 AND RETURN.
data : id(10) TYPE c VALUE 'TEXTS'.
TYPES:
BEGIN OF tab_type,
para TYPE string,
dobj TYPE string,
END OF tab_type.
DATA: itab TYPE STANDARD TABLE OF tab_type,
wa_itab type tab_type.
IMPORT itab FROM MEMORY ID id.
loop at itab into wa_itab.
write:
wa_itab-para,
wa_itab-dobj.
endloop.
Thanks,
vinod.

Exporting Internal Table from Methods

Hi Experts,
I wanted to export an internal table from Methods and I am using below syntax and its not working.
METHODS get_data IMPORTING value(s_matnr) type mara-matnr
exporting it_tab TYPE STANDARD TABLE itab.
Please let me know what is the proper syntax.
Thanks
Basanagouda

Hi,
Define itab as a 'table type' of standard table.
Example: TYPES: t_sflight TYPE STANDARD TABLE OF sflight.
METHODS : get_data IMPORTING s_carrid type sel_carrid
EXPORTING e_tab type t_sflight.
ENDCLASS

How to export internal table and pass the internal table to another screen?

Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*"     REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
Rayden

Hi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*"      OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden

Export internal table to memory in User Exit FM

Hi all,
My scenario here is to export an internal table in one user exit FM and import it back in another user exit FM.
I was trying to use
Export lt_table to memory id 'LABEL'.
then
Import lt_table from memory id 'LABEL'.
But then i hit error in the import statement. How can I rectify this?
Thanks. Answer will be rewarded.

Refer to the below related threads
Export an internal table to memory and import from memory into an internal
http://help.sap.com/saphelp_erp2005/helpdata/en/fc/eb3bf8358411d1829f0000e829fbfe/frameset.htm
Regards,
Santosh

Export internal table to Excel file pressing a new button created in ALV

Hello, I am trying to implement the functionality to export to excel file inside a button that i have created into my ALV. I don't want to use FileDownload UI.
The code I have set for event handler of this button is the following:
METHOD attach_files .
TYPES:
    BEGIN OF tipo_alv_tab,
      tipod    TYPE objid,
      descd   TYPE p1000-stext,
      begda   TYPE begdatum,
      endda   TYPE enddatum,
      pernr     TYPE pernr_d,
      nombre TYPE ad_namefir,
      email     TYPE ad_smtpadr,
      posicion TYPE p1000-stext,
      uodesc   TYPE p1000-stext,
    END OF tipo_alv_tab.
DATA:
    i_alv_tab    TYPE TABLE OF tipo_alv_tab,
    conv_out     TYPE REF TO cl_abap_conv_out_ce,
    content      TYPE xstring,
    lv_filename TYPE string,
    xml_out      TYPE string.
Fill values from memory
IMPORT name1 TO i_alv_tab FROM MEMORY ID 'ZCA'.
Build XML file with internal table information
CALL TRANSFORMATION ('ID') SOURCE tab = i_alv_tab[] RESULT XML xml_out.
Build XSTRING with XML
CALL FUNCTION 'CRM_IC_XML_STRING2XSTRING'
    EXPORTING
      instring   = xml_out
    IMPORTING
      outxstring = content.
Format XSTRING
conv_out = cl_abap_conv_out_ce=>create( encoding = 'UTF-8' ).
Convert data
conv_out->convert( EXPORTING data = xml_out IMPORTING buffer = content ).
Save file
CALL METHOD cl_wd_runtime_services=>attach_file_to_response
    EXPORTING
      i_filename      = 'Excel File.xls'
      i_content       = content
      i_mime_type     = 'application/msexcel'
      i_in_new_window = i_in_new_window
      i_inplace       = i_inplace.
ENDMETHOD.
When pressing the button, the file created is without extension, and with a rare name. When trying to open the file, it seems to be corrupted.
Does anyone know what am I doing wrong???
Please, help is really really appreciated!!!!

Hi Jorge,
The export data to excel functionality is available inbuilt in ALV and you dont have to write any implementation. However, if you want to create your own button for it, you can do so as below.
data:
lr_button type ref to cl_salv_wd_fe_button,
lr_function type ref to cl_salv_wd_function.
CREATE OBJECT lr_button.
lr_button->set_text( 'Export to excel' ).
lr_button->set_tooltip( 'Export data to excel' ).
lr_function = l_alv_model->if_salv_wd_function_settings~create_function( id = 'EXCEL' ).
lr_function->set_function_std( IF_SALV_WD_C_STD_FUNCTIONS=>EXPORT_EXCEL ).
lr_function->set_editor( lr_button ).
Now, you have created your own button, created a user defined function for the ALV and set this button as editor for the function. And using the set_function_std method, we have just mapped the functionality of your new button to the existing export to excel functionality in ALV.
Hope this is what you are looking for.
Regards
Nithya

Export Internal Table to XML in Background

Hi
I need to export a internal table into xml file in background using open dataset. The file is getting created but i am not able to open the file using IE/XML editor . When i open the file uisng wordpad i can see some charcters at the end of file which prevents it from opening in xml editor. if i delete the characters(box like) and save the file. i am able to open the file
When i downalod the same internal table via frontend using ws_downlod it works pefectly. no junk charcters are appended in the end. and hence files opens perfectly
below is the extract of program
START-OF-SELECTION.
   PERFORM get_data.
   PERFORM create_xml.
FORM get_data.
   REFRESH accesos.
   CLEAR accesos.
   MOVE: '45050' TO accesos-socio-numero,
                 'MOISES MORENO' TO accesos-socio-nombre,
                 '0' TO accesos-socio-reposicion.
   APPEND accesos.
ENDFORM.
i am using the following function modules
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
        EXPORTING
             name         = 'ACCESOS'
             dataobject   = accesos[]
        IMPORTING
             data_as_dom = l_dom
CHANGING
             document     = m_document
        EXCEPTIONS
             illegal_name = 1
             OTHERS       = 2.
       CHECK NOT l_dom IS INITIAL.
w_rc = m_document->append_child( new_child = l_dom ).
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
document      = m_document
IMPORTING
xml_as_string = w_string
size          = w_size
TABLES
xml_as_table = it_xml
EXCEPTIONS
no_document   = 1
OTHERS        = 2.
LOOP AT it_xml INTO xml_tab-d.
     APPEND xml_tab.
   ENDLOOP.
The following syntax for open datset which does not work
lv_physcial_file = '
hdat03\test.xml'.
OPEN DATASET lv_physcial_file IN BINARY MODE   FOR OUTPUT MESSAGE l_msg.
   LOOP AT xml_tab.
     TRANSFER xml_tab TO lv_physcial_file.
   ENDLOOP.
The ws_download function works
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
               BIN_FILESIZE = W_SIZE
               FILENAME = GK_RUTA
               FILETYPE = 'BIN'
TABLES
               DATA_TAB = XML_TAB
EXCEPTIONS
               OTHERS = 10.
many thnaks

Hi Chetan,
Can you just try changing the syntax to the following, I not sure if that will help but just try and see.
OPEN DATASET lv_physcial_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Regards
Mohamed

Export Internal table by calling static method

Hi friends,
Can u please tell me how to get internal table in export parameter by calling static method.
OR can u tell me how to declare internal table in method parameter.
Thanks in advance

Raja's method will work for all tables irrespective of the structure and is the best possible approach. However, if your requirement is simple and you do not have to deal with a lot many tables,
1. Create a Type-Pool, suppose ztypl
2. Within the type pool, declare a Structure type,
TYPES: BEGIN OF ztypl_struct1,
         "Place your fields here
       END OF ztypl_strict1,
       "Create a table of type ztypl_struct1 here
       ztypl_table1 TYPE TABLE OF ztypl_struct1.
Use "ZTYPL_TABLE1" as the "Associated type" in your method's Parameter definition in SE24.
eg.
IT_TABLE      TYPE     ZTYPL_TABLE1
If you are writing your class in an include,
    METHODS my_method1
      IMPORTING
        it_table1   TYPE ztypl_table1.
Do remember to include
TYPE-POOLS: ztypl.
in your class's Constructor / Include program.
Please award points if helpful.
Regards,
Ryan
Message was edited by:
        Ryan Cannel

Export internal table from report to web-dynpro

Hi,
I am trying to export an internal table from a report to my web dynpro pragram however its not working.
Statement used in my report -
EXPORT it_ordbk FROM it_ordbk TO MEMORY ID 'ZORDBK'.
Statement used in my web dynpro program
IMPORT it_ordbk to it_ordbk FROM MEMORY ID 'ZORDBK'.
This dynpro application is being called in HTML container on the screen.
Kindly help.
Cordially,
Danish

Hi Danish,
do not use export or import in Webdynpro.
try to create a class with global variables and in the report or at the place of Export fille the data .
and next in the place of Import memory to to call the global variable in the webdynpro and fill the internal table
go to se24> create a zclasss-> methods initialize>create a ztable same as export table and also declare in glaobal vairaible
--> next in the webdynpro program -->call the method retrive and push the global data to internal table.
Prabhudas

Exporting internal table to memory variable

I need to extract some data within a program into an internal table. Then I need to export the internal table into a memory variable
Then in another program i need to import this memory variable into another internal table
How to do the import export into a memory variable

See the simple example :
REPORT ZTEST_AMEM1.
tables : lfa1.
data : begin of i_lfa1 occurs 0 ,
       lifnr like lfa1-lifnr,
       name1 like lfa1-name1,
       land1 like lfa1-land1,
       end of i_lfa1.
start-of-selection.
select lifnr
       name1
       land1 from lfa1
       into table i_lfa1 up to 100 rows.
Export
export i_lfa1 to memory id 'SAP'.
submit ztest_amem2 and return.
write:/ 'hello'.
*& Report ZTEST_AMEM2
REPORT ZTEST_AMEM2.
data : begin of j_lfa1 occurs 0,
       lifnr like lfa1-lifnr,
       name1 like lfa1-name1,
       land1 like lfa1-land1,
       end of j_lfa1.
start-of-selection.
import i_lfa1 to j_lfa1 from memory id 'SAP'.
loop at j_lfa1.
write:/ j_lfa1-lifnr,j_lfa1-name1,j_lfa1-land1.
endloop.

Problem in exporting internal table to memory

Hi,
I have to export two internal tables (thead and titem) from a report (RFTBCF00) to memory which i will import in my function module can anyone letme know hw it cud b done .
Points will b assigned
Thnx,

You can take the help of this example:
report z_82235_test1                           .
types: begin of tab1,
         a(1),
         b(1),
       end of tab1.
types: begin of tab2,
         c(1),
         d(1),
       end of tab2.
data: itab1 type table of tab1,
      wa1 like line of itab1,
      itab2 type table of tab2,
      wa2 like line of itab2.
wa1-a = '1'.
wa1-b = '2'.
append wa1 to itab1.
clear wa1.
wa1-a = '3'.
wa1-b = '4'.
append wa1 to itab1.
clear wa1.
export itab1 to memory id '001'.
export itab2 to memory id '002'.
submit z_82235_test2 and return exporting list to memory .

Export Internal Table To E-Mail via attachted html or PDF file

i have an ALV display report for which the data is in the internal table.
Can anybody tell me how can i attach the simple internal table as an attachment to the mail ...
give me example code if possible
Maximum points will be given
thanks in advance.

here is the sample code but this code gives you two attachemetns as .xls files you try analyse and try it for PDF
you have to change in the packed_list parameter that is passed to the FM.
REPORT ZDOC_AS_EMAIL_3.
*& Report ZEMAIL_ATTACH *
*& Example of sending external email via SAPCONNECT *
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: l_t_objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
*Retrieve sample data from table ekpo
PERFORM data_retrieval.
*Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
*Populate message body text
perform populate_email_message_body.
*Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                    tables it_message
                            it_attach
                        using p_email
    'Example . xls documnet attachment'
                                 'XLS'
                            'filename'
                    changing gd_error
                          gd_reciever.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
*Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
*Build data table for .xls document
FORM build_xls_data_table.
*CONSTANTS: con_cret(2) TYPE c VALUE '0D', "OK for non Unicode
*con_tab(2) TYPE c VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
*Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                       using p_email
                                            p_mtitle
                                            p_format
                                          p_filename
                                    p_attdescription
                                    p_sender_address
                                p_sender_addres_type
                                    changing p_error
                                          p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
*Fill the document data.
w_doc_data-doc_size = 1.
*Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'REPORT'.
w_doc_data-obj_descr = ld_mtitle . "mail description
w_doc_data-sensitivty = 'F'.
*Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
*Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
*Create 1st attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 0.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
**Create 1st attachment notification
*t_packing_list-transf_bin = 'X'.
*t_packing_list-head_start = 0.
*t_packing_list-head_num = 1.
*t_packing_list-body_start = 1.
*DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
*t_packing_list-doc_type = ld_format.
*t_packing_list-obj_descr = ld_attdescription.
*t_packing_list-obj_name = ld_attfilename.
*t_packing_list-doc_size = t_packing_list-body_num * 255.
*APPEND t_packing_list.
**Create 2nd attachment notification
data: x type i.
DESCRIBE TABLE t_attachment LINES X.
append lines of it_attach to t_attachment.
data: start type i,
      end type i,
      cal type i.
start = X + 1.
describe table t_attachment lines end.
cal = end - start.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 0.
t_packing_list-head_num = 1.
t_packing_list-body_start = start.
t_packing_list-body_num = end.
*DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-obj_descr = 'Eng Change'. "ld_attdescription.
t_packing_list-doc_type = ld_format.
*t_packing_list-obj_name = 'Eng' .
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
*Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
object_header = l_t_objhead
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
*Populate zerror return code
ld_error = sy-subrc.
*Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
*Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 " WITH mode = 'INT'
"WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
*Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
Edited by: S@N on Jun 13, 2008 2:06 PM

Export internal table to Excel during debugging.

Hi Experts
I have put a debugger( old debugger ) on a certain line of code where we are checking the data of an internal table having around 10000 entries and I want to export this internal table data to an excel for analysis during debugging itself.
Is there a way to export this ? The new debugger does not work in IFD. ( 6.40)
Regards
Sukanya.

Hi
In application menu follow the path
Select the internal table then
Goto->Display Data Object -> Structure Editor
This will show only part of the internal.
Goto List-> Display entire list.
You can print the list or send it to excel sheet.
Regards
Navneet

Exporting internal table in a oops

Similar Messages

Maybe you are looking for