Exporting into wav and/or 320 kbps aac...

i'm using garageband '08 and i'd like to export song into disk in wav format or at least in aac but at 320 kbps.. for the latter i saw that you can set that (personalize) but once i select 320kbps it returns into aac-good quality at 64 kbps...
what can i do?
thanks
m

You have to convert it in iTunes afterwards.
Right. Once you've exported from GB to iTunes at best quality you can use the Import Settings button on the General panel in iTunes Prefs and set it to WAV encoder. Then right-click on your track and choose Create WAV Version.

Similar Messages

AAC Encoder at 320 kbps...

Hello all,
I'm new to the forum. I've had to erase my hard drive and ipod of everything so I've lost over 3,000 songs and have to re-import all of my music
The question is: I am assuming AAC Encoder at 320 kbps is the absolute best sound quality that I am going to get? I will be playing my music through my vehicle speakers and I want near CD sound quality!!!
The other question is: What can you tell me abou the other selections of encoders for importing?... I've searched the forums and haven't found anything, nor did I find a itunes manual.
Thank you all!!!

WAV and AIFF both are uncompressed audio formats.
WAV is mainly used on the Windows platform and AIFF on the MAC platform.
These formats can be read and edited by virtually all players and audio editors.
There's one disadvantage. They produce huge files of about 10 MB/minute of audio.
To reduce file sizes, people invented compression techniques.
Some of them succeeded in creating a codec (encoder/decoder) that will retain all audio information but reduce the file size to about half the size of WAV and AIFF.
Examples of these are Apple Lossless and FLAC (not supported by iTunes).
Your iPod (except the iPod Shuffle) supports WAV, but it will quickly fill up with those huge files.
Like Chris suggested, you should rip a song at different bit rates and try to determine what is best for your situation.
It all depends on your ears (hearing) and your playback system.
In my car, I can't even hear improvements above 128 kbps AAC.
M

Serious CS5+6 Audio out of sync on MP4 and Quicktime HD (AC3/AAC) export problem

Hello,
while exporting our video files and importing them into our projects to check the sync we noticed that if we export in MP4 1080p H264 format the audio is 1/2 video frame out of sync compared to the original. This happens with both original audio files attached to the original clip as well as other random audio files combined with the clip.
If we export the WAV file and import it again into the original timeline this is 100% in sync, but if we export that clip with the imported WAV file it's again out of sync.
please check the pic:
as you can see the "edit_1080p_1.mp4" files is the exported and re-imported clip, which is 100% synced to the video (from timecode 0:00:00:00) and the our of sync is about half a video frame.
This also seems to happen in CS5 as we just have tested on another old system.
Addon: It also happens with Quicktime HD Export.
If exported in AVI there is no out-of-sync, so this problem seems only to be on Dolby Digital and AAC encoded and multiplexed files.
As we found out if exporting clips with any CS5 or CS6 Version in mutiplexed AC3 format eveytime after re-importing those files back into Premiere the audio is about 1/2 videoframe delayed! So this means if you work with multiple temporary exported files, e.g. MP4 HD HQ formats your audio gets more and more out of sync.
But we also found out that if you simply convert WAV to AC3 there is also a slight delay on the AC3 file, although not noticeable on the first view, but if you switch to audio frames view it's about 1/10 frame.
I think this is a very serious error and needs to be fixed as soon as possible.
Nachricht geändert durch pinklemos

And another, even worse, update:
we did several tests with just converting the H264/PCM multiplexed file to different format, MPEG2/MP2, MPEG2/AC3, MP4/AAC (both CS6 and CS5) and we just encoded the file with Procoder in H264/AAC (orange colored). And the result was, that ALL Adobe encoded files are not correctly synced to the original but the Procoder file is! Even with CS5 this was already not working.
I am shocked, that nobody really seems to have noticed that elemental error until now...
So the only working workflow at the moment is to export all files into Quicktime H264/PCM format and then user other encoders to create the final files needed, if they need to have compressed audio formats like MP2, ACC or AC3.

How do you export logic projects, and into soundcloud without ruining any quality?

I export a song, and it lost alot of volume. I found a way around that by adding adaptive limiter to the entire mix. It helped alot. Now I post it to soundcloud and then some of the instruments quality degrade. And when i play it in iTUNES or even the finder window, it is how i want it to sound. When I hear it on soundcloud, its quality and volume degrades. Is there a way around this???
please help! Thanks!

Just to clarify before I make any suggestions is that what most DAWs call exporting isn't called exporting in Logic, it's called Bounce. If you use the export command in Logic it will give you seperate WAV files for each track and .midi files for any midi tracks you have in your project. The Bounce command is right below the export command in the file menu, though.
The settings you choose when bouncing really depends on your preferences and how big of a file you care to have. If you have no mastering or mixing left to do you should choose PCM saved as WAV or AIFF (I'm honestly not sure of the pros and cons of the two), but you can bounce the project as more than one file format at once so you don't really have to choose only one.
If you bounce to an MP3 go ahead and choose the highest settings which I believe is 320CBR (320 constant bitrate). You can also bounce as AAC, which I prefer because Apple Lossless results in a fairly small file (compared to WAV) while maintaining good quality. You can also manage the file's metadata from this menu so your ID3 tags are good to go.
Like I said it's really up to your preferences and what you are going to use the file for.

Help me! Audition always failing exports to wav, mov, and Premiere Pro! WHY???

Hello,
I am sound editing and mixing a picture locked 25 min short film. When done with the mix and ready to export the mixdown, the export always takes forever (the project is 12GB large total) I mixdown to stereo file wav, but when I open the file, both VLC and Media Player don't play, with WMP saying its corrupt. I bring the same file into Premiere, and it says that it cannot import "because of a header problem"! What is that? I tried the same with the export to Quicktime (mov) format, and I got the same result. Go up to the window and choose Export to Premiere (you know, directly into Premeire) and it says it it will take 12 hours. I don't remeber cs5.5 taking this long. HELP PLEASE, I need to export this by tonight!!!
Export settings(both formats):
Convvert to 48 khz
Convert to 24 bt (32 with mov; only option)
tried both RF64 and Legacy Chunk whatever
Premeire Pro freindly setting on in Preferences
Windows 7 64 Pro
INtel Core i7 930
16GB RAM
GeForce GTS 250

I don't think a file of that length should exceed 4GB, but be aware that Audition CAN export wave files larger than that due to the RF64 support (vs. 'legacy chunk'), and Premiere can't yet open RF64 giga-wave-files!
Now, other than telling you that this shouldn't be happening, we'll need more information before we can track down what's wrong. Best thing is to detail for us what your export settings are, precisely.

What is the difference between 256 kbps and 320 kbps, as far as storage is concerned?

how many 320 kbps M4A's would take up 8 GB, and how many 256 kbps would take up 8 GB? Also, would I be able to tell a difference betwen the two with my Apple EarPods?
thanks,
noah
Message was edited by: the_official_noah

the_official_noah wrote:
how many 320 kbps M4A's would take up 8 GB, and how many 256 kbps would take up 8 GB?
You would get 1/4 more with 256kbps. (100 songs @ 320 = 125 songs at 256)
Also, would I be able to tell a difference betwen the two with my Apple EarPods?
No. Doubtful you could tell the difference between 256 kbps AAC and 128 kbps AAC using earpods and iPhone.
Perhaps if you were sitting it a soundproof room and doing nothing else but paying specific attention to the music. But everyday use, you won; notice.

When I export a playlist and then open in excel, do whatever sorting I want, I then save the file and reimport into itunes but not all the songs are there. It appears to be from "comma's" in the song name. Any solutions?

I see songs such as "Monday, Monday" or "Paint It, Black" or even the artist name such as "Fireballs, with Jimmy Gilmer" which have comma's in them, being a problem when I try to do the following:
1. Export a playlist which contains songs which are all there and play fine, but some have comma's in the title such as listed above.
2. I then open that file in Excel and bring it in as a Tab-delimited file. Everything lays out fine, and all the songs are thing (including those with comma's).
3. I then sort the varoius fields I want (which I can't do in i-tunes because i-tunes won't sort it properly), and resave the file as a newly named file, which is also a .txt file.
4. I then import that playlist into my itunes. It is exactly the same songs that I just had exported but i-tunes says some of the songs can't be found.
I have traced this problem to comma's in the file name of the song such as listed above. There must be a solution to this either as the file is opened in excel or in how it's saved or some other solution short of having to rename song/artists without using comma's.
Thanks.

The additional problem is the file name of the song itself. Even if I were able to delete the commas or replace with a space for example, changing the file name would result in itunes not being able to find the file. I would have to go through each file (out of about 15,000+ songs) to find any that have titles such as described in this thread and change not only the song and artist in the fields, but changing the mp3 file itself.
I fear that I am really pretty much going to have to start with a list of songs that have no comma and then do a file compare to find those songs with commas and then just physically moving them into a new playlist I'm trying to create, but this is a royal pain as I want to be able to create a variety of playlists based on these chart dates/peak positions.
I'm trying to sort the songs in this manner: I use different fields in itunes so that I can put the "peak position" of each song based on Billboard charts, as well as the date the peak position was acheived. I use the "comment box" for that. I use the "grouping" field for my peak position.
So I end up with something like "10/14/1980" in the comment box as the peak position for a song which is in the grouping field, and so forth. If I try to sort the comments column in itunes for example, it won't sort properly. If I sort the Grouping field, it will bring up all the "1's", but that's followed by "10", 11, ...19, then "2", etc. This is why I want to export the playlist and sort it as I want, and then reimport the playlist into itunes.
What I'm ultimately trying to achieve is a year-by-year peak position playlist so that I end up with every #1 song (in this case) from, say, January 1st 1980 and then every #1 song in sequential order for the rest of the year falls in line. I have chart position dates from 1955 through 1999. I have entered in all the data from Billboard books I own so I can really create some amazing playlists, but these commas are problematic. Had I known this ahead of time I would have made "Monday, Monday" as "Monday Monday" and not included commas, but it's too late for that.
Any suggestions?

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

Can you export the date and user to Excel that appears into a Comments field in a tracking list?

Hi everyone,
Can you export the date and user to Excel that appears into a Comments field in a tracking list?
When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
In the Comments field appears also, besides the comment text, the user and date from who and when the comment is added.
Is there a way to export also the user and the date?
Thanks
Wim

create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
updating that field with the new comments (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
Please refer few more links: Hope they will help
http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
http://community.office365.com/en-us/f/154/t/278560.aspx
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Problems exporting rollover 'states' into Dreamweaver, and loss of font formats

Hi
I am quite new to Fireworks and am having a little difficulty with some aspects of it.
I am building a miltiple page site, and am exporting using the the 'export CSS and Images' option from Fireworks CS4 to Dreamweaver CS4.
I have applied some 'swap image behaviour' to the links on the Master Page.
However When I try to export to Dreamweaver I get the following message:
"Only sliced images from the current state will be included in this export. Hotspot and behaviour attributes will be ignored."
Obviously I want the states (swap image) functionality to be exported so that the javascript rollovers work. Any ideas how to resolve this?
Also, when I export the pages into Dreamweaver, I have noticed that the font formatting is lost e.g. <h1> format style etc So an orange <h1> font title, with black outline, will not retain that formatting in Dreamweaver (it actually renders as white, which is the same as the <p> font elements.). I do know how to alter the CSS to render a different colour in Dreamweaver: but its the character outline that I cannot reproduce by manipulating the CSS (I don't know how to anyway....).
Also, once a 'Master' page has been created, will all other pages within the document automatically inherit the functions and settings as per the Master Page. Or do I need to link each page to the Master Page in order for them to inherit its functionality and settings? I'm particuarly thinking about the states/rollover issue again here i.e. Will I need to set under/over states on each individual page or do I just need to set it once on the Master page?
Thanks for your help.

Q1: There. Is no way to resolve this in Fireworks. You'll have to export the other states manually and build the rollovers in dreamweaver.
Q2: Again, *if* there us a widely supported CSS option fir text outlining you have tomanually apply it to the code in Dreamweaver.
Q3: Hyperlinks and graphics on the master page should be applied to all child pages.
Fireworks is not a true web page editor. Keep this in mind. It is a graphics tool fulirst and foremost. The CSS and HTML features are not nearly as robust as Dreamweaver. Hope this helps

Subtitle workflow. Is it possible to import srt files into premiere and then export to Encore?

Hi, I'm editing a series of short documentaries that wil be published in DVD with subtitles, and I'm wondering if there's any way to import srt files into Premiere and then export the project to Encore.

You can easily (and better, IMHO) do what you want in Adobe Prelude. It's part of the CC subscription, and may have been included with CS6.
Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips. Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting. Don't select the Transcode option.
Cheers,
Jeff

Show Repeated key values in Reports and Export Into Excel

Hi Experts,
Currently I am working on the BW3.5 version. Our client requirement to display the repeated key value in web and export same into excel. I have followed the steps in web template which mentioned below to achieve the requirement.
1) In my web template, add the following line to the Template Properties object tag (the tag at the very top of the web template in HTML mode):<param name="SUPPRESS_REPETITION_TEXTS" value=""/>
After the change web template change, Myself execute the report in web, Its fine web. But I export into excel, again the key values are suppressed. So I have followed the steps in query. Then its fine. I mean, I can export into excel with repeated key values.
2) In my query, in Properties and on the Display tab, unchecked "Hide Repeated Key Values".
But do we have any other option without changing query properties to achieve the requirement.. I am fine with the web template change("SUPPRESS_REPETITION_TEXTS"). But I do not want to change the query properties.
Please help me to fix the issue. Thanks in advance.
Thanks,
RR

Hi Experts,
I have come across one of the suggestion in the below location. Could you plz help me to implement it.
http://www.sapfans.com/forums/viewtopic.php?f=16&t=118185
Suggestion:
You can do exactly what you want, but it will take either a button changing the properties of the web item or a javascript function added to the context menu getting the properties of the table item and changing it to "X" or "". These are just two examples, there are other ways to do this. This is the actual code that sets the suppression for the repeated texts. Hope this helps.
SAP_BW_URL item=âu20ACu2122TABLE_1âu20ACu2122 SUPPRESS_REPETITION_TEXTS=âu20ACu2122Xâu20ACu2122
Thanks,
RR

Import data from few tables and export into the same tables on different db

I want to import data from few tables and export into the same tables on different database. But on the target database, additional columns have been added
to the same tables. how can i do the import?
Its urgent can anyone please help me do this?
Thanks.

Hello Junior DBA,
maybe try it with the "copy command".
http://download.oracle.com/docs/cd/B14117_01/server.101/b12170/apb.htm
Have a look at the section "Understanding COPY Command Syntax".
Here is an example of a COPY command that copies only two columns from the source table, and copies only those rows in which the value of DEPARTMENT_ID is 30:Regards
Stefan

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

HT2513 how do i import and export HOMEAWAY calander and AIR BNB Calendar into my ICLOUD Calendar??

how do i import and export HOMEAWAY calander and AIR BNB Calendar into my ICLOUD Calendar??

If these calendars are listed under On My Mac on your Mac, follow Roger Wilmut's instructions here: http://www.wilmut.webspace.virginmedia.com/notes/icloudmovecalendars.html under "To move 'On MY Mac' calendars to iCloud".

Exporting into wav and/or 320 kbps aac...

Similar Messages

Maybe you are looking for