Exporting Inventory Data

Is it possible to export inventory data to a different application? We are
using Sybase. I would to have an in house custom developed application
retrieve data directly from Sybase. Is this possible? How?
Thanks,
Thomas

one simple way is to create a CSV file http://www.novell.com/documentation/...a/bqe95x3.html
Shaun Pond

Similar Messages

  • Zenworks Inventory Data Export

    I am trying to get a report of our current systems using the Zenworks
    Inventory Data Export as shown in edir.
    When I run the export it also shows systems we have deleted. I am
    running
    zfd 4.01 sp2.
    Is there a way to get a report on only the systems that are in edir or
    filter it for only current systems?
    Thanks,
    Paul

    paul,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • How to export a data as an XML file from oracle data base?

    could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
    Thankz in advance
    Bala

    SQL> SELECT * FROM v$version;
    BANNER
    Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
    PL/SQL Release 11.1.0.6.0 - Production
    CORE    11.1.0.6.0      Production
    TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
    NLSRTL Version 11.1.0.6.0 - Production
    5 rows selected.
    SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
    Directory created.
    SQL> declare                                                                                                               
      2    doc  DBMS_XMLDOM.DOMDocument;                                                                                       
      3    xdata  XMLTYPE;                                                                                                     
      4                                                                                                                        
      5    CURSOR xmlcur IS                                                                                                    
      6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",                       
      7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")              
      8                              ,xmlelement("EmployeeNumber",e.empno)                                                     
      9                              ,xmlelement("EmployeeName",e.ename)                                                       
    10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)                             
    11                                                      ,xmlelement("Location",d.loc)                                     
    12                                         )                                                                              
    13                   )                                                                                                    
    14     FROM   emp e                                                                                                       
    15     ,      dept d                                                                                                      
    16     WHERE  e.DEPTNO=d.DEPTNO;                                                                                          
    17                                                                                                                        
    18  begin                                                                                                                 
    19    OPEN xmlcur;                                                                                                        
    20    FETCH xmlcur INTO xdata;                                                                                            
    21    CLOSE xmlcur;                                                                                                       
    22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);                                                                           
    23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');                                                                  
    24  end;                                                                                                                  
    25  /                                                                                                                      
    PL/SQL procedure successfully completed.
    .

  • Inventory data not matching with R/3

    Hi,
    In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
    We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
    But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
    1.What could be the reason?
    2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
    Pls help us with your suggestions.

    We have followed as per the How to handle inventory managment document.
    The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
    But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
    In RSDV validity table date maintained from 1999-Dec'200.
    We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
    Pls help with your inputs.
    Thanks
    Soujanya

  • When I tried to Mail Merge for Data is is not exporting any data.

    HI,
    EBS-12.1.3
    DB-11gR1
    OS - RHEL 5.6
    [With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
    Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
    I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
    Problem:
    But Problem is when I tried to Mail Merge for Data is is not exporting any data.
    ====================================================================
    Steps
    1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
    2. Enter the New Request. as
    Letter Name "App. Letter Contract Site",
    Automatic or Manual = Manual.
    Select the Name from the LOVs for the Request for Detail Block.
    3. Press the "Export Data" icon.
    4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
    5. Select the "Word 2003" from the View List. and Reporting is Checked.
    6. Review the Folowing Enteries as:
    Integrator Appointment Letter - Contact Site
    Viewer Word 2003
    Reporting Yes
    Layout App. Letter Contract Site
    Content XXHR_MBE_APP_LET_CONT_SITE_V
    Session Date 2011/08/02
    Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
    7. Press "Create Document" Button.
    8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
    9. It open the Mail Merge Letter but no Data is Display.
    ===========================================================
    Note:
    a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
    b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
    ===========================================================
    Thanks
    Vishwa

    Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
    Thanks,
    Hussein

  • Reg: Exporting the data into excel in ADF 11g application.

    Hi All,
    We have developed an application in ADF 11g which retrieves the data from database in the form of table. Now we have a requirement to export that data into an excel sheet.
    Can anyone please help us regarding this.
    Thanks,
    Harsha

    Hi Harsha,
    you can use <af:exportCollectionActionListener /> component to do that. Set the exportedId property to point to of the table. You have options to export all rows or only selected rows.
    <af:commandToolbarButton text="Export All Rows to Excel" immediate="true"
                                                   id="exportAll">
    <af:exportCollectionActionListener type="excelHTML" exportedId="table"
                                                     filename="export.xls"
                                                     title="ADF Faces Export - All" exportedRows="all"/>
    </af:commandToolbarButton>
    <af:commandToolbarButton text="Export Selected Rows to Excel" immediate="true"
                                            id="exportSelected">
    <af:exportCollectionActionListener type="excelHTML" exportedId="table"
                                                     filename="export.xls"
                                                     title="ADF Faces Export - Selected Rows"
                                                      exportedRows="selected"/>
    </af:commandToolbarButton>Good Luck,
    Luc Bors

  • Deploying custom report for custom hardware inventory data.

    Hi!
    I want do the following:
    1) Extend Hardware Inventory using my own *.mof file. Like,
    #pragma namespace ("\\\\.\\root\\cimv2\\SMS")
    [ SMS_Report (TRUE),
    SMS_Group_Name ("My Inventory"),
    SMS_Class_ID ("CUSTOM|My_Inventory|4.0") ]
    class My_Inventory : SMS_Class_Template
    [SMS_Report(TRUE)] string SerialNumber;
    [SMS_Report(TRUE)] string SomeData;
    2) Extend Reporting system with my own report that will use data from custom hardware inventory. For example, joins inventoried data with SCCM resources.
    3) Deploy 1) and 2) programmatically to any sccm installation. So, report should not be linked to concrete data source or report server url.
    If you know the tools that may help me, it will be very helpful! Many thanks!

    You should ask the .rdl part from the SQL Reporting services forums, you should get better answers from there, because this isn't purely a ConfigMgr issue.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices

  • How to extract Inventory data from SAP R/3  system

    Hi friends How to extract Inventory data from SAP R/3  system? What are report we may expect from the Inventory?

    Hi,
    Inventory management
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
    How to Handle Inventory Management Scenarios in BW (NW2004)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Loading of Cube
    •• ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
    http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
    Non-Cumulative Values / Stock Handling
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
    Non-Cumulatives
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
    Here you will find all the Inventory Management BI Contents:
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    2LIS_03_BX- Initial Stock/Material stock
    2LIS_03_BF - Material movements
    2LIS_03_UM - Revaluations/Find the price of the stock
    The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
    detailed level (material, plant, storage location and so on). At this moment, the opening
    stock is the operative stock in the source system. "At this moment" is the point in time at
    which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
    documents are to be posted during this run and so the stock does not change during this
    run, as we will see below). It is not possible to choose a key date freely.
    The second DataSource (2LIS_03_BF) is used to extract the material movements into
    the BW system. This DataSource provides the data as material documents (MCMSEG
    structure).
    The third of the above DataSources (2LIS_03_UM) contains data from valuated
    revaluations in Financial Accounting (document BSEG). This data is required to update
    valuated stock changes for the calculated stock balance in the BW. This information is
    not required in many situations as it is often only the quantities that are of importance.
    This DataSource only describes financial accounting processes, not logistical ones. In
    other words, only the stock value is changed here, no changes are made to the
    quantities. Everything that is subsequently mentioned here about the upload sequence
    and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
    This means a detailed description is not required for the revaluation DataSource.
    http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
    These are the standard data sources used for Inventory extraction.
    Hope this helps.
    Thanks,
    JituK

  • Questions on Subviews and Import/Export in Data Modeler v3 EA1.

    I have a few questions about the capabilities of Data Modeler v3 EA1:
    1) Is it possible to rename subviews? Would like more meaningful names then Relational_x - Subview_x.
    2) Is it possible to save documents at subview level?
    3) Is it possible to import/export subsets of data?
    4) Having problems importing Erwin 7 .xml file, is there known problems with this import?
    Judy

    Hi Judy,
    1) To rename a subview just right click on it in the browser tree and select "Properties". In the properties dialog change the name and click OK button.
    2) You can save a subview as new Data Modeler design - from the File menu select Export -> To Data Modeling Design. In the newly opened dialog select the subview you want to export and click OK button.
    3) After saving a subview as new design (see answer #2) it can be imported in some other design (File -> Import -> Data Modeler Design).
    4) What kind of problems do you have with import of Erwin 7.* xml file?
    Regards,
    Ivan

  • I need to be able to export the data from health kit and read it in something.  Anything.

    I've tried pretty much everything from Excel to downloaded and online apps.  I'm done downloading crap to my brand new computer.  My problem is that I need to be able to export the data into a readable format so that I can give it to my dr(s).  Is there ANY WAY that this is possible?  I'm kind of at my wits end here.  All help/suggestions are appreciated.
    What I've done:
    1.  Exported data.  It creates an xml file that can be opened in excel but gives raw data that no one but egghead developers can read (and I use that term in the best possible way.)
    2. Tried to download an excel add on.  Didn't work.
    3.  Tried several online applications.  Same result as Excel.
    Somehow this data has to be able to be read by someone other than myself, on my phone.
    Thanks to one and all for the many, many suggestions that I'm about to get.

    sam.loomis1234
    The only way out of Premiere Elements 11 is via export in video format (except for jpegs or audio under Publish+Share/Computer/Image or audio).
    The video is whole, not in a project file (project.prel).
    And, the Premiere Elements 11 project.prel does not appear to be an After Effects supported project format
    http://helpx.adobe.com/after-effects/kb/supported-file-formats-effects-cs4.html#main_head1
    Have you asked this question in the Adobe After Effects Forum regarding supported formats?
    http://forums.adobe.com/community/aftereffects_general_discussion
    ATR

  • How can we export table data to a CSV file??

    Hi,
    I have the following requirement. Initially business agreed upon, exporting the table data to Excel file. But now, they would like to export the table data to a CSV file, which is not being supported by af:exportCollectionActionListener component.
    Because, when i opened the exported CSV file, i can see the exported data sorrounded with HTML tags. Hence the issue.
    Does someone has any solution for this ... Like, how can we export the table data to csv format. And it should work similar to exporting the data to excel sheet.
    For youre reference here is the code which i have used to export the table data..
    ><f:facet name="menus">
    ><af:menu text="Menu" id="m1">
    ><af:commandMenuItem text="Print" id="cmi1">
    ><af:exportCollectionActionListener exportedId="t1"
    >title="CommunicationDistributionList"
    >filename="CommunicationDistributionList"
    >type="excelHTML"/> ---- I tried with removing value for this attribute. With no value, it did not worked at all.
    ></af:commandMenuItem>
    ></af:menu>
    ></f:facet>
    Thanks & Regards,
    Kiran Konjeti

    Hi Alex,
    I have already visited that POST and it works only in 10g. Not in 11g.
    I got the solution for this. The solution is :
    Use the following code in jsff
    ==================
    <af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="text/csv; charset=utf-8"
    >filename="test.csv"
    >method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
    ></af:commandButton>
    OR
    <af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="application/vnd.ms-excel; charset=utf-8"
    >filename="test.csv"
    >method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
    ></af:commandButton>
    And place this code in ManagedBean
    ======================
    > public void test(FacesContext facesContext, OutputStream outputStream) throws IOException {
    > DCBindingContainer dcBindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    >DCIteratorBinding itrBinding = (DCIteratorBinding)dcBindings.get("fetchDataIterator");
    >tableRows = itrBinding.getAllRowsInRange();
    preparaing column headers
    >PrintWriter out = new PrintWriter(outputStream);
    >out.print(" ID");
    >out.print(",");
    >out.print("Name");
    >out.print(",");
    >out.print("Designation");
    >out.print(",");
    >out.print("Salary");
    >out.println();
    preparing column data
    > for(Row row : tableRows){
    >DCDataRow dataRow = (DCDataRow)row;
    > DataLoaderDTO dto = (DataLoaderDTO)dataRow.getDataProvider();
    >out.print(dto.getId());
    >out.print(",");
    >out.print(dto.getName());
    >out.print(",");
    >out.print(dto.getDesgntn());
    >out.print(",");
    >out.print(dto.getSalary());
    >out.println();
    >}
    >out.flush();
    >out.close();
    > }
    And do the following settings(*OPTIONAL*) for your browser - Only in case, if the file is being blocked by IE
    ==================================================================
    http://ais-ss.usc.edu/helpdoc/main/browser/bris004b.html
    This resolves implementation of exporting table data to CSV file in 11g.
    Thanks & Regards,
    Kiran Konjeti

  • How can I export my data to a 3D-CAD IGES-File?

    Is it posible to export my data from an array to an IGES-File? I want to show my Data in an Unix-Catia 4.2.2 System.

    > Is it posible to export my data from an array to an IGES-File? I want
    > to show my Data in an Unix-Catia 4.2.2 System.
    do you really need IGES ? if you are happy enough with polygons I recommend
    the STL format whihc is much simpler.
    How is your data "array" organized ? If you have only points, you'll need to
    mesh them first. Have a look to http://www.dynabits.com/sw/point_cloud.htm
    for a free software that does it.
    If you already have a triangular mesh, I suggest STL format instead of IGES.
    If you have 3D surfaces, I was considering doing this one of these days.
    I can help you on this, for free if it remains simple and general purpose...
    Philippe Guglielmetti - www.dynabits.com

  • How can we export the data from OAF Page to Excel instead of .csv or .txt

    Hello,
    How can we export the data from OAF Page to Excel instead of .csv or .txt
    When i click on the export button it is exporting to txt file, But i need to export the data into Excel by default
    Please help me
    Thanks in advance
    Thanks,
    Raju
    We have changed the below profile option to get the data in excel by default
    Profile Name Export MIME type
    Profile Code FND_EXPORT_MIME_TYPE+
    Existing Value: text/tab-separated-values+
    Change as: Excel
    Thank you,
    Raju
    Edited by: 1006649 on May 21, 2013 10:55 AM

    We have changed the below profile option to get the data in excel by default
    Profile Name Export MIME type
    Profile Code FND_EXPORT_MIME_TYPE+
    Existing Value: text/tab-separated-values+
    Change as: Excel
    Thank you,
    Raju

  • Export is not exporting the data from Page. It always gets the data from VO

    Hi,
    I have got a critical issue, where I am Not able to export the current data from the page.
    I have an export button and the VO is attached to it.
    1) My page will execute the VO and I do some calculations to remove some rows, add the grand total etc.
    2) The export button just re-executes the query and exports, which is not that, I want. I would like to export the current contents of the VO, which I manipulate and it is shown on the page.
    To give an example -
    My VO query is executed, when I click the Report button. I then adds Grand Total row to the VO and it gets displayed on the Page also.
    Now, when I click the export button, it just exports the data which is coming from the VO SQL query, whereas I want the data from current state of VO i.e. with the grand total, which I added and is coming on the page also.
    I will be really grateful, if someone can help me with this as it is really urgent.
    Thanks for your help.
    Shiju

    Hi Shiju,
    Is the export to csv opening fine with the data showing in individual columns when opening from internet explorer. What version of IE are you using? For us the export works fine from Firefox but does not work well in IE. From IE, the data shows with the commas in a single string. Appreciate your response as it will help us understand if our issue is local to our environment.
    Thanks.

  • How to export the data from table to excel sheet

    hi experts i have some problem am trying to export the data fro table to Excel sheet  in the view controller i have created one button wit public void onActionCLEAR(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActionCLEAR(ServerEvent)
       //wdContext.nodeBapi_Salesorder_Getlist_Input().
       //wdContext.nodeBapi_Salesorder_Getlist_Input().invalidate();
        //@@end
      //@@begin javadoc:onActionExporToExcel(ServerEvent)
      /** Declared validating event handler. */
      //@@end
      public void onActionExporToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActionExporToExcel(ServerEvent)
         try{
         FileOutputStream fos=new FileOutputStream("Test.xls");
          PrintStream ps=new PrintStream(fos);
          ps.println("<html><body><table border=1>");
          int size=wdContext.nodeBapi_Salesorder_Getlist_Input().size();
           Iterator attributes=wdContext.getNodeInfo().iterateAttributes();
           ps.println("<tr>");
           while(attributes.hasNext()){
            ps.println("<th>");
            DataAttributeInfo attrName=(DataAttributeInfo)attributes.next();
            ps.println(attrName.getName());
            ps.println("</th>");
           ps.println("</tr>");
          for(int i=0; i<wdContext.nodeBapi_Salesorder_Getlist_Input().size();i++)
            attributes=wdContext.getNodeInfo().iterateAttributes();
            ps.println("<tr>");
            IWDNodeElement ele=wdContext.getElementAt(i);
            while(attributes.hasNext()){
              ps.println("<td>");
              DataAttributeInfo attrName=(DataAttributeInfo)attributes.next();
              ps.println(""+ele.getAttributeAsText(attrName.getName()));
              ps.println("</td>");
            ps.println("</tr>");
           ps.println("</table></body></html>");
           ps.flush();
           ps.close();
           fos.close();
          catch(Exception e){
           wdComponentAPI.getMessageManager().reportException(e.getMessage(), false);
          finally{
         //return("Test.xls")  ;
        //@@end
      }h action and i have return the code
    its running sucessfully but am not able to perform the action plz help me

    Hi,
    You shouldn't use DataAttributeInfo as it is an internal object, if I'm correct.
    Use IWDAttributeInfo instead of DataAttributeInfo and it should work
    (See also API doc of IWDNodeInfo.iterateAttributes() at http://help.sap.com/javadocs/nwce/ce711sp02/wdr/com.sap.wdr/com/sap/tc/webdynpro/progmodel/api/IWDNodeInfo.html#iterateAttributes())
    Cheers,
    Robin

Maybe you are looking for