Exporting ISSUES! Help

I am a relatively new user to lightroom. I haven't had any exporting issues until today. I am attempting to export a photo/photos to a specific folder with a custom name. When I do this it exports the WHOLE library and NOT the edited photo. What am I doing wrong??

Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

Similar Messages

Quuicktime Export Issues HELP

I'm having trouble exporting a Quicktime file from Flash. The
file I need to export must be 533% larger than my FLA (its for
stadium signage). I tmust be 15,30 pixels wide - huge, I know.
Whenever I export to Quicktime with these settings, I get a MOV
that only shows a poprtion of my FLA, play choppily with poor
images.
I've tried importing my SWF into After Effects and sizing it
up and rendering there too. Same problem.
Is this a quicktime issue? A Flash issue? Any help or ideas
greatly appreciated.

I recommend exporting as a PNG sequence - then bringing that
into After Effects to make a quicktime
from.
Chris Georgenes
Adobe Community Expert
www.mudbubble.com
www.keyframer.com
www.howtocheatinflash.com
jfoley wrote:
> I'm having trouble exporting a Quicktime file from
Flash. The file I need to
> export must be 533% larger than my FLA (its for stadium
signage). I tmust be
> 15,30 pixels wide - huge, I know. Whenever I export to
Quicktime with these
> settings, I get a MOV that only shows a poprtion of my
FLA, play choppily with
> poor images.
>
> I've tried importing my SWF into After Effects and
sizing it up and rendering
> there too. Same problem.
>
> Is this a quicktime issue? A Flash issue? Any help or
ideas greatly
> appreciated.
>
>
>

PP CS5.5 FLV To MP4 Export Issues / Problems

I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
Jim

What do you mean by a better routine?
A better compression routine than H.264.
Is the quality better than H.264?
Yes.
Does this use an MOV wrapper?
Yes.
Also, would it import correctly into PPro?
Yes.
we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
I don't know anything about FCP.
Sorry for all the questions, just want to get things right before diving into a new codec.
It's harmless, and free.
Download it and run some tests.

Reporting Export Issue from Taleo

Can anyone help? We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen. In one field we have Aggregated Agencies assigned to any particular Job Code. In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell. Has anyone found a workaround for this?

is there someway that it was reformatted by the Iomega drive being daisy chained to it?
No. That is not possible -anyway, reformatting erases everything on a drive.
You would have noticed that first.
You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

Bizzare export issue

Here is a very weird export issue. Windows XP.
Project is set at h264 1920x1080 mono audio 29.97 fps
I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
Anyone seen this before?
Is there a setting that could be incorrect?
-cablet

Weird, man. Not sure what might cause that.

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

Crystal JRC PDF Export Issue

We are experiencing a PDF export issue with Crystal JRC version 12.2.202. The PDF report shows 1 of 3 pages but ONLY the first page is generated. When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report. I can't find any errors in the log that would indicate what the problem is. To resolve the issue, I have to recycle the WebLogic application server that hosts the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
Any ideas on how to resolve this ?

Hi Ted,
Thanks for the response!
Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
Thanks.

Simple flash export issue

hello
I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
I have another file that I am able to export and it does not have this problem.
They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
Regards,
Tom

fixed the exporting issue.

Configurator 3 export issue

I developed a panel, exported it into photoshop cs6 and it worked fine. I have a good grasp of the concept....the problem is that I saved the panel, reopened it in configurator to change something and now it will not export....I have tried everything including deleteing the folder in panels and re-exporting. HELP!!!!
Here is the error that I get.....

Hi,
On Mac, are you using as a Non-Administrator user to run Configurator?
Yes, this problem occurs under this situation.
Could you please use "File->Export as CS Extension" feature to export the panel as a "ZXP" file to anothe place like "Desktop", then double click the "ZXP' file to make Extension Manager to installed into the products.
This is a new feature in Configurator 3.
Exman can install the "zxp" file to both Photoshop 32 bit and 64 bit once a time .
And the exported "zxp" files can be submitted to "Adobe Exchange" easily.
Or if you want to use "File->Export panel", then just like what you have done, you need export it into another place and then copy the exported folder into "Plugins/panels" folder.
Thanks
Xiaoyan

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Using 128bit key Blowfish and any export issues

Hi,
I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
Please let me know.
Thanks
RT
Here is a sample code
String ks = "123456789123456";
kb = ks.getBytes();
SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
Cipher cipher = Cipher.getInstance("blowfish");
// Initialisation of cipher object for Encryption.
cipher.init(Cipher.ENCRYPT_MODE, key);

1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
you can read the
'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
section of
http://java.sun.com/products/jce/javase.html
2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

InDesign CS6 - Exporting Issues, PDF being sent to Photshop and saving as a psd rather than the requested pdf? Please help!

Hi
I have an issue in InDesign CS6. It has been happening the last couple of days now.
When i export to pdf. regardless of quality instead of being saved as a pdf it is being sent to Photoshop which then saves the file as a psd...
I have updated InDesign to the latest CS6 update which helped the issue yesterday but today the same problem is back. Help please what could be the problem and how do I fix it?
Any advice is very appreciated.
Thanks
Sam

ExportPDF is a subscription service for exporting PDF files into Word and Excel, from Adobe Reader. I suspect you need the InDesign forum, as InDesign is the product here.

Export Issue - Adobe's Solutions Don't Help

I have an odd problem. I've been using Premiere Pro for a while now, with no problems whatsoever. I have used Adobe Media Encoder to render my projects and haven't experienced anything odd until this morning. I was working on a project that's taken me a few weeks and I tried to render it out so that I could watch it, and I got the following error: "Could not read from the source. Please check if it has moved or been deleted."
I obviously did NOT move or delete the source, I quit the encoder and got out of the project and started again, but to no avail. I restarted my computer, same problem. I looked up the problem (because so many people post on the forums instead of just googling), and I found two solutions - one said that the problem can be caused if I had Premiere CS3 installed and didn't uninstall it before installing CS4. I never had CS3 installed, so that's definitely not the problem. A second solution asked me to put a shortcut named Premiere in a certain folder, and I did that but it didn't help either.
I became so frustrated that I uninstalled the entire Master Collection, ran CCleaner, the CS4 Clean Script, and the CS3 Clean Script (I never had CS3, but just in case the Premiere CS3 thing was the problem somehow). I then reinstalled the Master Collection, and the problem is STILL HERE!
Now for the really odd part - my other projects still render. While I was searching for answers I found that the people the above solutions worked for couldn't render anything, but I can. I'm wondering if there are any file-specifc things that could prevent it from being rendered, maybe it's corrupted or something. However, when I open it it runs just fine, I can watch the entire video playback within Premiere and edit things. Only exporting this one project doesn't work.
I'm running Windows 7x64, 4gb RAM, 2.66ghz quad core. I don't think that information should matter much because other things render, so I don't think it's a hardware problem.
If anyone has any ideas please let me know, I'm desperate for some help!

I've tried that, I can edit the timeline just fine but nothing I do gets it to render. Other things I've tried include only trying to render a small portion of the timeline, and making a new project and importing the entire other project (I thought maybe one of the files used in the project was corrupted, so I thought maybe trying to import everything would give me an error with importing whatever is corrupt. No such luck, it worked fine.)
There is some hope though, I've found two ways to render it based on suggestions from others in other forums on rendering issues - one is to open After Effects, import the Premiere timeline, then render the AE composition because it uses the built-in renderer and not the Media Encoder. A second and slightly mind boggling way is, instead of exporting from Premiere into the Encoder, I can exit everything, open Media Encoder, click File -> Add Premiere Timeline, then navigate to the file and add the timeline to my render queue. When I do it through ME and not Premiere, it renders perfectly. I've already sent that render off to my client with a big thumbs up...but I'm very confused.
I've found a solution for this one, but is there anything I can do differently for next time? It can't be something with the project file if it does actually render...right? Sigh that's 2 hours wasted uninstalling and reinstalling the whole suite

EXPORT ISSUE! PLEASE HELP!

Hi! I have created an Ad Promo for a project I've been working on for a long time now. I created the promo in Keynote '08, and I have to give it to someone in A movie format (playable in QuickTime). I have exported it to QuickTime, but the motions are jerky, and some of the timings are off. (there is music in the show, and certain "builds" or "animations" are supposed to happen and certain points in the music, and they are off time.) I saw that there were more advanced settings for both the audio and video quality, but I don't know what any of those things mean. What can I do or settings I can change, or programs can I download to accomplish my goal? PLEASE HELP!!! I give my presentation tomorrow!!!!!! THANK YOU SO MUCH!

I did have the FaceBook Exporter installed with the previous version of iP
Have you removed it?
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Exporting ISSUES! Help

Similar Messages

Maybe you are looking for