Exporting media creates two files.

I am trying to export an AVC HD video file I imported off my video camera and edited. I go to File >> Export >> Media and select MPEG2 Blue-ray as that is the HD format I want to export the file into and later burn to a disk. It says it is going to export the file as an .m2v file, which it does just fine. However, it also creates a second .wav file for the videos sound. The video file does not have any sound in it at all. I looked through the settings on Premiere Pro to see if there was some setting that was causing this. I did not find anything.
Hopefully someone has a fix for this.
Thanks
Sean

If you want a muxed file, you will need to also set the multiplexing in the Multiplexing tab. What is it set to now?
Good luck,
Hunt

Similar Messages

CS4 Save as creates two files

When "saving" or "saving as" legacy files two files get saved. One has the suffix added as "-01". Is there a preference to turn off because I have to keep going back to kill the duplicate file.
Mac OSX 10.4.11
Illustrator version 14.0.0 (CS4)
Thanks in advance, Bob

do you have more than 1 artboard? Uncheck the option of saving artboards. But think, if you do this, you are going to save the current artboard and lose the others....

Saving a PDF creates two files - one I named and one with a gibberish name

I'm hoping someone can help me. I got a new HP laptop (Windows 7) and downloaded Acrobat Standard 9 from the Adobe website when I couldn't find my install disc. When I save a PDF, it saves correctly. However, a second file is created with a gibberish name composed of three letters and five numbers (i.e. aab05176). When I try to open the mystery file, my laptop asks what program it should use. If I choose Adobe, it will open and the mystery file is a copy of the PDF that's also saved under the name I told it to Save As. So, essentially, when I save, I get two copies every time, and always in the same destination folder.
Can anyone help me fix this? When I'm working on a PDF, I like to save often, so my work won't be lost. When I'm done, I have tons and tons of these gibberish files to delete.
Thank you in advance!

The filie with the funky name is a temp file that is created that is eventually made into the file you are saving as a pdf. You do not say where the file is being stored, the it should be in a temp folder that periodically gets cleaned out. However, sometimes one does have to manually cleanup the temp folder.

Logger creates two file...why ?

Hello,
actually I'm working on a program and I want to log the errors occuring during several runs. To log the errors I'm using a Logger object in combination with a file handler so all logging messages are written to a .txt file. Now I have two problems:
1) the .txt is in XML-format which isn't really bad at all...but I'd better like to create a 'real' .txt file without the XML-tags.
2) there are always 2 files created: the .txt file and a LCK-file. Can anybody explain me where I need the LCK-file for, because it's always empty. Do I need this file because all information I want to lock appears in the .txt file and if no, how can I avoid the creation of this file ?
Thank You very much,
Findus

I'm looking for a solution to the .lck file problem too.
Changing the log file format is easy, just install a different Formatter on the handler that's generating the file:
fileHandler.setFormatter(new java.util.logging.SimpleLogFormatter());

Using H.264 to export to create mpeg file?

When I want to burn a FCP project to DVD SP I export it to Compressor and then choose the "DVD Best quality 120 (or 90) minutes" setting.
But, when I export for the web I use H.264 compression which gives me really good results.
Is there anyway of creating an MPEG file to be used in DVD SP which uses H.264 compression quality?
Thanks,,

Hi,
a good reading for you, check out the second part of this article (from F paragrapher onwards):
http://www.apple.com/quicktime/tutorials/h264.html
G.

Can someone tell me how to stop itunes from saving my media to two files?

I know the answer is simple...but I can't seem to find it in plain english!
So i bought a new used computer (lol) and took all my backed up music from my external drive and dumped it right into my computer. Put the whole MUSIC file into finder, under the "Music" section...then when that was done I dragged it into iTunes.
Well lo and behold my 500G hard drive is almost full! AGH! So i tediously went through files on my itunes, deleting all I could. Everytime it asked me if I wanted to move the files to the trash and I said YES!
Ok...so after hours of that, i look in my Music file in Finder (which now has a new folder from my external called MUSIC) and lo and behold...every file i deleted is still there!
So, I'm no dummy. I guess iTunes makes a new folder of iTunes media, something like that? Doubling everything?
I will gladly delete everything and start over if I must, but can someone please tell me how I can put music files on my computer without them doubling, or how to delete them and have them actually delete? Settings?!
help! Thank you!

orianaaa wrote:
So i bought a new used computer (lol) and took all my backed up music from my external drive and dumped it right into my computer. Put the whole MUSIC file into finder, under the "Music" section
Adding music to iTunes will copy it into the iTunes mdia folder.
Put it into /Music/iTunes/iTunes media/Automatically add to iTunes older.
This will move (not copy) the media.
You can delete the files you originally copied into the Music folder.

Error while trying to use Export to create dump-file....................

I am trying to export my portal PAGEGROUP plus other objects under it i.e. pages etc. and followed the instructions listed in:
http://download-uk.oracle.com/docs/cd/B14099_11/portal.1012/b14037/cg_imex.htm#i1030999
but when I run the .cmd script generated through portal after export I get the following error:
Verifying the environment variables...
Verifying the Oracle Client version...
export Mode Selected
Verifying the portal schema passed...
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0751: Unable to connect to Oracle. Exiting SQL*Plus
Error: Could not connect. Invalid Portal Schema, Password or Connect String
Export/Import aborted.Eventhough I successfully logged-on as a portal user through SQLPLUS / JDEVELOPER and em console. And am giving the same username/password when I run the script but somehow keeps giving me the above error. Here is my export command that I am using:
C:\Export>exportscript.cmd -mode export -s PORTAL -p <portal_password> -pu <portal_username>
-pp <portal_usernamepassword> -company <companyname> -c ORCL -d <dumpdfilename>
here ORCL is the connect_string.
Any help is appreciated.
Thanks

I got it working so please disregard actually the PORTAL password wasn't correct I retrieved the password using the following:
C:\Export>ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w <password> -b "cn=IAS
Infrastructure Databases,cn=IAS,cn=Products,cn=OracleContext" -s sub "orclResou
rcename=portal"and used the value for orclpasswordattribute as a portal password and it worked fine.
Thanks

Export PDF creates 0kb file and Print Error.

By "Print Error", I mean a simple pop-up window with the pages logo and the sentence "Print. Error while printing" even though I haven't asked for anything to be printed. The resulting pdf file is zero k in size and useless.
I had this problem in iW '06 and thought that '08 might fix it. No dice though.
Deleating prefs did not fix the issue. ['06 or '08]
Anyone? Thanks.
CSK
Burbank, CA

I suspect that you've turned off a couple fonts with Font Book (or perhaps removed them from the Fonts folder). Pages expects certain fonts to exist - even if we don't use them or even want them.

Export, Media, = please describe the 25 options/uses in Premiere Pro CS5

Please explain the possible applications of each of the following export formats found in Adobe Premiere Pro CS5 Master Collection (Teacher & Student Edition)
UNDER *FILE *EXPORT *MEDIA
Audio Interchange File Format
Microsoft AVI
Windows Bitmap
DPX
Animated GIF
JPEG
MP3
P2 Movie
PNG
Quick Time = Vimeo uploads,
Targa
TIFF
Uncompressed Microsoft AVI
Windows Waveform
MPEG2 MXF
Audio Only
FLV/F4V
H.264
H.264 Blu-ray
MPEG4
MPEG2
MPEG2-DVD
MPEG2 Blu-ray
Windows Media

Excellent - great information guys! I love the links to write ups.
preface: (This whole project was shot with Canon 5DM2 - I don't remember if the cameras were set at 24 or 30 fps ) so as i am learning about the export options i am also learning (the hard way) about the seq settings.
Right now on my current project (fashion show) I have 9 designers that walked the runway, so i am creating 9 timelines in a project. for each designer/tl i will output (.mov)vimeo and facebook seg for each one. i have edited 4 designers so far and i think i have some issues and i need to learn more about seq settings and also output options.
I am also delivering a physical dvd. I created a FINAL tl that i am dropping each (nested) designer segment onto. when i created this tl i must have set it up as dv ntsc - (out of habit)-and i think that is the choice for going to physical dvd?not sure?.
the first 2 designers i set the seq settings at dv ntsc and they fit (nested ) on the "final" tl, ///however i think i had to resize all those clips (I didn't know why they weren't right. - honestly i can't remember///
ANYWAYS, Designers 3 and 4= i had set the seq settings at canon xf mpeg2 1080i/p
Should all the designers seg be set at canon xf mpeg2 1080i/p (i selected 1080p30) but i really don't know if it was 24 or 30 (is that information in clip info somewhere?)
Can I change a seq setting once the timeline is edited on? = please don't tell me i have to re=edit. yikes What should the correct settings be?
Is there a work around to put designers 1&2 (dv ntsc settings) on same tl with 3&4 (canon xf mpeg 1080p30) ?
Finally what setting should that final (NESTED FINAL timeline all designers) be? - for output to physical DVD ( JVC-Taiyo Yuden )

Dynamic Configuration for two file adapters communication channels

Hello Experts!!!!!!
     In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
However the receiver service for both the communication channel are same.
In message mapping I am using multi mapping to create two files out a single message.
Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.
Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
Thanks & Regards,
Amol

Thanks for your prompt responses!!!!!
    Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
I mean if iam using say comm. channel A and B.
Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
and then do samething for comm. channel B in its dynamic conf.
Regards,
Amol

Using a for loop to create multiple files ???

I have the below code. I want to make a file for every element stored in the array. How do I do this?
Vector files = new Vector();
for (int i = 0; i<files.size(); i++)
//System.out.println(files.elementAt(i));
}

Not much. Are the files being created by processes on multiple hosts? If not, adding the host name and IP seem useless. Are the files being created by multiple processes and/or multiple threads on same host? If so, then the former isn't helpful. Is it possible for two threads or processes to create a file in the same millisecond - if not IMPOSSIBLE then it is possible and 99.99% chance that they won't isn't good enough. If so, then that won't work either. What if a single thread quickly creates two files in same millisecond - remember the millisecond value may not change for several milliseconds due to host system architecture.
So, I guess it depends on your requirements.

Premiere Pro CC crashes when exporting media

Rendering from a multicam sequence with in/out points set. Media consists of RED Epic 5K, Canon 7D, GoPro, and BWF sound. Output is for Vimeo 1080p 23.976. All cams and sound are set to 23.976.   Can anyone help me?
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Adobe Premiere Pro.exe
Application Version:          7.2.1.4
Application Timestamp:          52aed7f3
Fault Module Name:          mc_enc_avc.dll
Fault Module Version:          9.6.10.5101
Fault Module Timestamp:          528edcc2
Exception Code:          c0000005
Exception Offset:          00000000000e333c
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          ab6d
Additional Information 2:          ab6d8f3bdd4c5b9ba8f11cac7aa08978
Additional Information 3:          6904
Additional Information 4:          69042974d8876da55a506b3d59ff6217
[Thread title updated.]
Message was edited by: Jim Simon

Hi Jim,
I'm exporting Media into a file format suitable for Vimeo. The interesting thing is that when exporting directly from Premiere Pro CC v7.2.1, I experienced the crash, but when I queued the job in AME, it ran to completion. Trying to export directly from within PPro again causes it to crash, this time flagging ImporterREDServer.exe as the abending application.
Thanks.

HELP!EXPORTING FROM KEYNOTE TO QUICKTIME AND IT CREATES TWO DIFFERENT FILES

I made a presentation in keynote, adding music from my itunes library and need to send it to a client (who owns a PC) ASAP.
When I export my keynote file to QT, it creates two separate files on my computer. One is the project and one is the "soundtrack.mov"
1. Why does it create two separate files?
2. How can I send the ENTIRE presentation in one?
3. How can I send it to a PC user?
4. Why did it tell me on my last music selection that I added to keynote (After I exported) that I would have to open it in itunes???
Totally NEED HELP ASAP!
Thank you
ML

Yeah, me too. Bump. Can anybody explain this behavior?!?

Exported media file size issues Sometimes one size, Sometimes another without making any changes in FCPX?

Hi there
I'm having some strange issues with files sizes from
Share>Export Media
I'm not changing anything about the video (just moving an audio track forwards and backwards ever so slightly to try and get it to the correct timing), nor am I changing anything about the way I export the video.
I am always using the EXACT same settings
Sometimes finder states my video is 1.15GB, sometimes its states its 3.8GB
But then when I close Finder down and then go back into Finder again to find the file it states its gone from 1.15GB to 3.8GB
I'm not sure if this is a error with my system or Final Cut Pro X?
By the way I'm running 10.0.5
Thanks

Bob,
Well, the issue has gone to press and I have upgraded to Snow Leopard and CS5. Initial tests show that the problem still exists, and that it is related to the XML tags. The problem occurs both with legacy (CS4) documents and documents created from scratch in CS5. As I mentioned before, it only seems to happen when overrides are applied to paragraph styles.
Here is a sidebar as exported from InDesign. Overrides were applied to the two headlines to modify color, point size and baseline shift:
The file with XML tags, packaged and opened in InCopy CS5:
The same file with XML tags removed, packaged and opened in InCopy:
OK. Now is when things start to get really interesting.
I thought perhaps that exporting the InDesign file as an IDML document, then reopening it, might perhaps fix the problem. But, no. In fact, when I reopened the IDML file in InDesign, the font styles were broken in _exactly_ the same places as they were in InCopy. Apparently, whatever problem InCopy is having with the XML tags is being duplicated by the IDML export. (Do these processes share the same file format?)
For example, here is a title page from the magazine as a screen grab in InDesign. Overrides were applied to the top headline on a line-by-line basis:
The same file, exported as an IDML file and reopened in InDesign:
As with InCopy, when the XML tags are removed, the IDML file reopens in InDesign just fine. Unfortunately, removing the XML tags is not a option. We need them to repurpose the content after it goes to press.
This is a real bug, and for us it's a serious one. I'm surprised it hasn't come up before. Is there any way to draw this to Adobe's attention? I'd be more than happy to share any of these files if that would help.
Steve

Export Media in Premiere Pro CS6 ONLY produces an Audio File in Media Encoder

First, all the system info:
Windows 7 Home Premium Service Pack 1
Intel HD Graphics 3000 Display Adapter
I’m using Premiere Pro CS6 Version 6.0.5 (001 (MC: 264587)) “Mighty Kilt”
Version 6.0.3.1 (64 Bit) of Adobe Media Encoder CS6
Other Adobe applications installed: AIR, Creative Cloud, Download Assistant, Encore CS6 Library, Flash Player 12 ActiveX, Flash Player 12 Plugin, Help Manager, Premiere Pro CS6, Premiere Pro CS6 Functional Content, Reader XI
I’ve run check for updates on both Premiere Pro and Media Encoder and everything is up to date
I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments at lower quality levels as needed so everything would fit on the discs.
The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem for the last several months.
But now, two things happen:
1) AME automatically designates the "Output File" with an .aac extension (see attached)
2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
Huh?
Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
Format: MPEG2-DVD
Preset: NTSC Widescreen High Quality
Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
BOTH the "Export Video" and "Export Audio" boxes are checked (see attached screen print)
Filters Tab: left as is, don't do anything here
Multiplexer Tab:
choose the "DVD" button (vs the "None" button)
Bitrate Type: left as Variable which is what is selected as a default
Video Tab:
Codec: Reads MainConcept MPEG Video
Quality: increase it to the max of 5
TV Standard: NTSC
Frame Rate: 29.97
Field Order: None (Progressive)
Pixel Aspect Ration: Widescreen 16:9
Render at Maximum Depth box checked
Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
Audio Tab:
Audio Format: Dolby Digital
Codec: Dolby Digital
Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
I check the "Use Maximum Render Quality" box
I chose "Queue" for everything and then let it run overnight
And yes, the original media has BOTH a video track and an audio track that works (see Screenprint)
So... what am I doing wrong, helpful experts????

Larry, Mark, Jim & Bill -
It is 1 am Tuesday morning and I'd do a primal scream if my family weren't all sleeping upstairs.
Somewhere along the way, I either read or was given the advice to just skip AME, load my videos as timelines in Encore, and just do the transcoding there.
I spent almost a day trying to figure out how to get "buttons" for my menus I was building (they weren't appearing in Encore's library like they should) and eventually found a simply workaround.
So I then spent the last 24 hours or so building all my menus, creating small clips for my "motion menu" buttons, getting all that straightened away.
Got really excited earlier tonight since it seemed like I was nearly finished and coming down the home stretch.
I hit "build" in Encore, went away for a couple hours, and came back to find a big error message awaiting me telling me that "Encoding Failed."
I have read a lot of posts, and the outlook is not good, or at least the possible solution not simple or short from a time perspective.
I have a 100 families awaiting their DVD they've paid for that they initially were told they'd have by mid-February. I've been telling everybody that they would have it - guaranteed - by this weekend when there's a band festival that would be ideal for distribution. The DVD duplication company says they have to have it by Wed morning at the absolute latest. Meaning I've got about 24 hours to figure this out and burn my dual-layer masters of the two DVDs or once again tell people "I know I guaranteed you'd have it by this weekend, but I don't have it ready yet."
Almost as importantly, I can't afford to keep spending the hours and hours and hours on this that I have. It's impacting my personal and professional life.
Thus the primal scream.
The posts I read about the encoding failure all pretty much advise that I use AME to do all the transcoding work. Which of course brings me squarely back to my original problem: I cannot get a video file out of AME.
I'm embedding a screenshot of what I see when I click on the pull-down menu in the AME dialogue window. The problem: there is no MPEG2-DVD option listed to be chosen.
Although I'm relatively new to forums, I've read enough posts by now that it seems like most people are in crisis mode when they post. So I realize my situation is not all that unique. But from a newbie rookie in the field to you experts, I REALLY could use some assistance right now, because between this and the long, cold winter we've had, I'm about to lose it. :-)
P.S. Mark, in answer to your question about frame rates, I have 18 different videos/films/projects that I'm including in my two DVD-set. There have probably been nearly 6-7 different cameras that have contributed footage to one or more of those films by borrowing camcorders of different brands and types and quality levels from people. Nearly every one of those 18 films have multi-camera sequences in them. And many films are collections of sequences which themselves are "nested sequences" sometimes three deep. In otherwords, there is no way I can tell you all the various frame rates that may be represented among these 18 separate projects and I certainly can't go back and hope to change them all to the same one.
Help. Please. :-)

Exporting media creates two files.

Similar Messages

Maybe you are looking for