Exporting MiniDV (SD) Projects to hard drive from iMOVIE & then use them to burn DVDs

I am trying to export all my MiniDv files I have already uploaded to iMovie creating multiple projects. I wanted to export the best quality movie possible that is also great for burning DVDs. I have been using h.264, but haven't much success. Should I be using mpeg4 (h.264) or Quicktime (h.264)? Also, the bite rates have been throwing me off as well. I have tried 5000 kbits/sec and that was so so. I went down from there to 3000 to 2000 and it got worse. I am currently trying out 20,000 kbits/sec as we speak. I also selected CD/DVD-RAM in the export settings over Download & Stream. Not sure if that makes much of a difference?
Most of the MiniDV tapes are standard SD (4:3), but a few are SD wide screen.
I would love to get a master setting to use, so I am not worrying if the quility of the export will come out ok!
I have 50, so time is an essence. This can take me a long time to get through all the tapes.
**** I am NOT using these export files to edit. Just to view
Thanks,
Jason

Just to be clear on this.(Yes I know that AppleMan has already asked this question above)
Are you just wanting to transfer what is on your Tape onto DVD without adding any Titles, transitions etc etc?
In other words when you watch the DVD you want it to be identical to watching the MiniDV tape with nothing added or removed or adjusted ?
If this IS the case then try this.
Via Finder navigate to the required iMovie Event Folder.
In this folder you should see either --- " iMovie Movie Cache" OR " iMovie Cache" OR both.
Now in these folders you should see " Cache - 25 .mov " or " Cache.mov " respectively.
Open iDVD and drag either one of these in.
If you want to put more than one Event on the DVD then drag the other Cache-25.mov or Cache.mov from the other Events in.
Select in iDVD Preferences > Projects > Encoding = Professional Quality for up to 2 hours video including menu on single sided .
This will be much better than exporting to h.264 and quicker.
Also I don't think that the Single Field Processing "debate " comes into this workflow, could be wrong????

Similar Messages

I am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac. I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email

i am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac. I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email. Please help

Post your question in the MS Mac forums since it's their software you're having issues with:
http://answers.microsoft.com/en-us/mac

I'm trying to clone a internal hard drive from another mac using a usb connection.

I'm trying to clone a internal hard drive from another mac using a usb connection to an external drive so that I don't lose the file before reinstalling the software but I keep on getting a message:
"Restore Failure
Source volume is read-write and cannot be unmounted, so it can't be block copied."
Any advice on how to make a copy of this internal drive?
Thanks!
....also the internal hard drive i am trying to copying run on a mac os x 10.5 and i'm reinstalling the software because the computer is not starting and only shows a grey folder with a question marks inside.

I've had my Maxtor external OneTouch 250GB for about 18 months now and it hasn't skipped a beat. I have hear of people having their Maxtor drive just up and die but you will probably find that goes for all manufacturers.
By the way, Maxtor is, amongst others, an OEM supplier to Apple.

How do I remove an external hard drive from airport extreme using airport utility 6.2

I want to remove an external drive from my airport extreme but unsure how to do so (apart from just unplugging it). I need to take it away and hopefully plug it back in later. Any advice would be appreciated.

Unfortunately, AirPort Utility 6.2 does not provide you with the option to "unplug" a drive.
If the drive is mounted on your desktop, simply drag its icon to the Trash.....or.....right-click the disk icon and choose the Eject option.
Now you can disconnect the hard drive from the AirPort Extreme.
If the drive does not appear on the desktop, then you can simply physically unplug the drive.

How can I copy projects and events to an external hard drive from iMovie 10?

I have created a project in iMovie 10, which I would now like to share with a colleague, in a form in which he can edit just like I can. I do not see a way to copt projects and events to an external hard drive, the way I could from previous versions of iMovie. Any suggestions?

You can copy an iMovie 10 library to an external volume (HD, Thumb drive etc.) with the Finder so as to share it with a colleague. You may find the following link helpful:
http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
Before copying the library you have to make sure that all media is in the library. Media from iTunes, iPhoto and similar are by default linked to my iMovie and not copied to the library. To resolve this you may need to consolidate media before you copy the library. See for details:
http://help.apple.com/imovie/mac/10.0/#mov882dee351
Note that your colleague has to be using the same version of iMovie. Even different minor updates may cause problems.
I hope this helps.
Geoff.

My iTunes library has too much on it. is there a way to export it to an external hard drive and play movies from there?

I have nearly filled up my hard drive with movies on itunes. i know i can export everything to an external hard drive, but is there a way to export only the movies, delete those from my hard drive, and then play the movies with the external hard drive connected?

If they don't contain DRM, use a program such as Switch. If they do, you can't.
(59769)

How to read external hard-drive from all users

Hello everybody !
I have a Lacie Porshe Design external hard-drive for my Mac.
I have 2 user accounts which both are "admin".
Since yesterday, when I plug my external hard-drive, I cannot read the files on it unless I'm on the first "admin" account. I want to read the files from all the users account. There's a little red stop sign on the files and it tells me I have not the permission to view the files when I'm on the second user account.
Why does it work only with the first "admin" account and not the second one ? How to I disable this ?
It worked perfectly yesterday and I have no idea why.
Thank you very much guys !

I am sorry for the confusion.
The technician fresh-installed all the programs needed on a session they created called admin. On it there is all the programs but nothing else.
In case of trouble with the programs and licenses, the techicians asked for us to leave this ADMIN session untouched and to do our project and personnals things on our own new session.
So I got
ADMIN - only the programs installed by the technicians, admin status enable first
PERSONNAL - all my personnal files and the programs installed by the techicians, admin status enable later
When I read my Lacie Hard-Drive from the PERSONNAL account, I do not have the permission to read my old Time Machine backup files from my previous mac even thought the PERSONNAL account got the admin status enable. But when I read the Hard-Drive from the ADMIN account, I can read those files.
Hopefully this is clearer.
Thank you for your time !

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

I have an external hard drive, from Iomega. However, I cannot copy or save any file to it. On my PC it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?

I have an external hard drive, from Iomega. that I can open and see my files. However, I cannot copy or save any file to it. On my PC I have it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?
Also, Im a photographer, so I like to name a lot of files at the same time (used to do in on PC and it was very usefull.) cannot find out how to do it on my Mac. Really appretiate if some one can give me a solution! Thanx

Your drive is formatted with the NTFS file system. OS X can read but not write to the NTFS file system. There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition. I have not tried them and don't know if they work.
The only file system that OS X and Windows can both write to natively is the FAT32 file system.

I have Mountain Lion OS Install CD downloaded onto my external hard drive, how do I use this to upgrade from Leopard

Current computer that I just bought used is operating on Leopard 10.5.8
I have Mountain Lion OS X CD installation files downloaded on my external hard drive from another Mac that I have owned.
How do I use my external HD to download and Install Mountain OS X wizard.
Is the only way to do this to buy a copy of snow leopard and then once upgrading to that, plug in my external HD and then access the Mtn install file as I would if I had the installation CD?
When I try to access the install file from my external HD, i get to the installation window and then when I am to select a hard drive to install it on I receuve a red exclamation mark error that says it can not be written to the HD. Why is this? Because I'm not on snow leopard but rather leopard?

As you have the installer on a DVD, you can do a trick that consists in formatting the hard drive, and then, install Mountain Lion.
First, make a backup of your files with Time Machine > http://support.apple.com/kb/HT1427 I recommend Time Machine because it will be easier to restore your files later.
Then, insert the DVD with Mountain Lion and hold the C key while your Mac is starting, so you will see a window with different options. Open Disk Utility, choose Macintosh HD in the sidebar, go to Erase tab and erase the drive.
After erasing the drive, you can install Mountain Lion. Close Disk Utility and install it. During the initial setup, it will ask you to restore your files, so plug the external drive with the backup and follow its steps. Note that PowerPC apps aren't compatible

Can i copy my entire hard drive from one computer to another?

I am buying a used ibook 900gh 640ram 40gb hd using 300mh clamshell now - i would like to copy my entire hard drive from the clamshell to the new ibook OS and all so when i use it everything will look and work exactly like it does on the clamshell - can i do this easily? disc copy when booted from a CD?

Hi, not on Tiger at the moment, so I can't be certain, but...
I may be wrong, but I thought the Networked Mac only came about in Leopard's Migration assistant.
http://support.apple.com/kb/HT1554
Setup Assistant, included with computers that have Mac OS X 10.3.4 or later preinstalled, can transfer data (including account settings and home folders) from a previous Mac (that's using Mac OS X 10.1 or later) to your newer computer. You'll need a FireWire cable to connect the two computers together. The Assistant offers to transfer (or "migrate") data from your older computer when you turn on your new computer for the first time. Make sure the older computer's firmware is up-to-date first.
The only way I see this is going to happen is with a USB/FW external drive, and painfully Clone the Clamshell via USB 1.1 to the external drive, move the drive to the iBook and connect via FW.
More info...
http://www.oreillynet.com/pub/a/mac/2005/05/17/tiger.html

How can I remove the hard drive from an iMac g4 before recycling it?

How can I remove the hard drive from an iMac g4 before recycling it?

There are take-apart guides online. For example
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
However, you can also consider securely erasing the hard drive instead. You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive. If this is a viable option, please post back (include Mac OS X version on installation disc).

Can I transfer a hard drive from one macbook pro laptop to another?

I have a 2009 Macbook pro with a cracked screen and a messed up track pad (laptop A), but a fully functional hard drive. I have another 2009 Macbook pro (laptop B) with a blown hard drive, but everything else seems to be fine.
I removed the blown hitachi 320 hard drive from laptop B and set it aside. Then I removed the seemingly good Seagate 500 hard drive from laptop A and put it into laptop B. When I turn on Laptop B with the hard drive in it I get the folder with the question mark screen.
HELP. I am not tech savvy at all. But I can follow directions. Thanks.
Monica
*Please let me know if you need additional information from me.

Restart the computer with the Option key held down.
If you see the drive, click on it and then select it in the Startup Disk pane of System Preferences.
If you don’t, insert a Mac OS X install DVD, press C if needed, and either repair the drive or install an OS onto it.
(110094)

How do I put my photos from a hard drive to my mac using different versions of Iphoto? It is saying I can't because of the updated version.

Hello,
I am trying to move photos from my hard drive to my mac. Mac is using an updated version of Iphoto and is denying the transfer.
How do I get around this? Do I download the order version? or can I not get my photos? If anyone can help please do.
You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
Thanks Carol

I copied my photos onto my hard drive from my mac about 3 months ago. I just plugged my hard drive in to put my pictures back onto my mac but it is giving me a message when trying to open up the photos from the hard drive that states
Like I said we need to know exactly what you did
THere are lots of totally different ways to "copy your photos" onto a hard drive
Exactly how did you do that? The correct way to move an iPhoot library is to verify that the hard drive is formattted Mac OS extended (journaled) and then to drag the iPhoto library intact as a single entity to it - reverse to bring it back - just drag it from the EHD to the pictures folder (default location) on your computer
Why are you doing this?
you can try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database - depending on what has been going on this might resolve things
LN

I borrowed a hard drive from a friend that contains many thousands of songs. Somehow when tranferring these to iTunes I managed to get several copies of each song. How can i do a bulk delete of all the copies leaving just one version of each song?

I need help please. I borrowed a hard drive from a friend which contains many thousands of songs. When adding them to my iTunes library I somehow managed to make multiple copies of each song. Is there a way to do a bulk delete of all the duplicates? If I have to go one by one it will take a lifetime.

I have the same problem. I keep backups on a home server and this is where my library pointed to. I changed it to the local drive and now I have two copies in the library. I need to either bulk delete or clear the library (without deleting the files) and then rebuild. How do I do either of these things?

Exporting MiniDV (SD) Projects to hard drive from iMOVIE & then use them to burn DVDs

Similar Messages

Maybe you are looking for