Exporting .mov to H264 in Quicktime Pro not working for iPad!

Good morning All, Thanks for your help. When I take video's with my digital camera it records in Quicktime, however I have always had to export the videos with QuicktimePro in the H264 codec for them to transfer to my iPhone. What is happening with the iPad, is that when I export them to that or mp4 it says this movie could not be played on the iPad. The only work around I have found is to hit the advance tab in iTunes and convert it, then drag them out and back into iPhoto (because I want the videos with the event in Photos). Is anyone else having this issue? Any Suggestions? Thanks!!!

Who has similar problems. Who has workarounds.
Interesting... but wierder and wierder!
Not sure it is much of a workaround, but I just loaded my H.264/AAC M4V Harry Potter 7 file into QT 7 Pro and deleted chapers 2 through 30. While I agree that I cannot currently save the edited data as a standalone file, I could save it as a reference file that is non-compatible with QL under Mavericks. However, if I then open the reference file in QT 7 Pro, I could then use the "Movie to MPEG-4" option to "Pass through" both the audio and the video to create an MP4 file that will open in both QT X v10.3 and QT 7 and is QL compatible.
As to your subler workflow, while the MP4 file I created with subler did not open in QT 7, it did open in QT X v10.3 and the H.264 video track was QL compatible. I suspect the reason the MP4 file won't open in QT 7 and why QL won't play the Photo-JPEG track is that QT 7 and QL consider the secondary video track that is created by Subler to be "out of spec" for the MP4 file container. On the other hand, if I place the H.264/AAC data in an M4V file container, then it opens in both QT 7 and QT X v10.3 and both the H.264 and the Photo-JPEG tracks are QL compatible.
Nice catch on your part as I am still reviewing the QT X v10.3 forced conversions and had not even started looking as Subler. Also do most of my editing before conversion to H.264/AAC/AC3/Chapter output to M4V so it did not dawn on me to try and edit my M4V files. Thanks to your comments have learned that Subler does not like my AC3 DD5.1 audio track (now seems to cause an infinite loop in Subler due to Mavericks reading of AC3 audio track as having a 0 Kbps data rate) and QL now handles multiple video tracks. (Mavericks—one step forward and two steps back as far as QT is concerned.)

Similar Messages

The smtp outgoing server which works for Ipad will not work for iPad mini?

Why would the out going server which works for iPad not work on iPad mini

Mike found this from the website from your email provider make sure your using the imap server unless you want to use pop on your device.
Incoming Mail (POP3) Server:
pop.bellaliant.net
imap.bellaliant.net
Outgoing Mail (SMTP) Server:
smtp.bellaliant.net
imap.bellaliant.net
Incoming Mail Server Username
Your full e-mail address

Update to Quicktime Pro not working

Just bought the Quicktime Pro license key from the Apple Store. When I input my name and the key and click "Apply", a label states "QuickTime 7 Pro". However, this information seems not to persist: After closing the registration window and re-opening the same window later, it states "Buy Quicktime Pro...". All the menus still contain the "Pro" label and I am unable to save any movie.
I uninstalled Quicktime and re-installed it with a fresh download from the Apple site. To no avail.
Any ideas what I am doing wrong here?

My user account belongs to the local Administrators group. Nevertheless, I tried to use the function "Run as Administrator" function to make sure, Vista really runs Quicktime with all privileges. Did not work.
For the second time, I uninstalled the software, then I deleted manually the folder C:\program files\ (since QT Uninstall leaves tons of files there - no wonder I can't get past the problem).
I rebooted the system and downloaded the setup files again. Ran the installer "as administrator". Ran Quicktime Pro as Administrator. It still doesn't remember the Pro functions after having unlocked that functionality using the key obtained from Apple.
At this level, I have to give up. I spent two afternoons on this and I need to get things done. It's probably not a QT Pro problem and I might need to restage my computer in the future (I upgraded XP Pro to Vista Ultimate - instead of doing a fresh installation). However, since QT Pro is so far the only software giving me a headache, I am not really feeling the urge to re-install the operating system.
Maybe an upcoming QT release will fix the problem...

Export to Excel and File Upload is not working on ipad/IPhone

Hi
We have a site in ASP.Net 2008 which is running on browsers and devices. There is an option to export to excel and file uploadd, It is working in the browsers but not working in Devices like IPad and Iphone. we are creating xml file when export to excel. We have tried it on IPad1,IPad3 and iphone3.
can you please elaborate the causes of these issues? Pleas support to fix the issues.
Regards,
Manoj

How does your PL/SQL for the saving of uploaded files looks like? Where does this error happen? Does your process have an error message?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Digital AV adaptor not working for iPad 2

Dear all,
I have bought a digital AV adpator. It was orignally working well with the iPad 2 for months and i am able to see the mirror image on the TV. But recently, it's not. No signal is transmitted to the TV (no visual or audio).
I tested with my iphone 4S and it works well.
Can anyone tell me what's wrong?
Is it due to a software bug? Or some settings that i need to do on my iPad 2?
regards/thanks
k-square

Hi Diavonex,
Thanks. have done what you suggested, but it still does not work.
On the TV side, it says "incompatabile signal".. thought it was strange coz it was working with the ipad 2 previously.
regards/thanks,
k-square

IOS 8.02 guided access not working for Ipad 2

Will the next update for iOS 8 fix the issue for guides access for Ipad 2? Issue; function not working at all. And when will this update come?
We have now tried everything we can think of. Reset settings, totale factory reset etc. This doen both on the Ipad and thorugh iTunes.
For us the Ipad got useless with iOS 8 as we us it as a visitor kiosk using the app SIGN IN. We really regret updating.... please fix asap

I can confirm that this works on 3rd Generation iPads. But not 2nd Generation iPads. I have found that if Guided access was enabled prior to the upgrade it might reset in this process.
Turn off Guided Access in Accessibility / Settings.
Hard reboot. (Hold Home and Lock buttons for 7 seconds)
Turn on Guided Access in Accessibility / Settings. Reset Passcode.
Anyone have luck with a newer model?

Exported Movie looks good in Quicktime, but not in any other Player?

I Have noticed that the text that I have exported from After Effects were looking jagged in windows media and Kmplayer. At first I thought it was my render settings that were making it look low quality, but then I found that when played in Quicktime the movie look high rez. only problem is that quick time is extremely laggy when I open up my movies. Why is this happening?

Huh? That's simply hardware scaling. Your movie is not being viewed at 100% size.
Mylenium

Windows 7 64 bit and quicktime pro not working

Audio plays, but no video. Any suggestions?

Most likely QuickTime doesn't have a codec for the video. Open the movie, open Movie Inspector (under the Window menu) and post the information on format that should show. Someone should be able to tell you if there's a plugin available for that format, if it's not one QuickTime can handle natively.

One speaker on MacBook Pro not working for certain programs?

When I either receive or place a FaceTime call on my MacBook Pro, the left speaker cuts out audio and produces high static. The right speaker is fine. The receiving end can also hear the static feedback, but their two speakers work fine. I have all my iOS devices setup to receive and place FaceTime calls (iPhone 5s, iPad, and MacBook Pro 15 inch late 2011). If I place or receive the FaceTime calls on my iPhone or iPad, there is no problem.
I've tested the speakers, youtube, iTunes audio, streaming websites, netflix, etc... and all works fine on the MacBook Pro. Just FaceTime. I also went into system preferences and the speaker setup is correct (audio in and out - internal speakers).
I've also restarted, reinstalled Yosemite...still FaceTime left speaker problem.
I appreciate any troubleshooting advice and/or if others have experienced this problem.
Thanks!

The Troubleshooting FaceTime for Mac OS X:FaceTime for Mac: Troubleshooting FaceTime - Apple Support does not offer much in the way of help for the problem you are having.
Have you tried going to System Preferences, Sound, Output and playing around with the Balance to see if that makes any difference?
You might also consider going to FaceTime, Preferences and turn FaceTime OFF and then back ON.
And to have the system checked, you could take it to an Apple store genius bar and have the techs see if there is something hardware-wise interfering with FaceTime.

QuickTime StartTime not working on iPad

Not sure if this is the place to ask if not please advise.
The following code works fine on my desktop but on the iPad it ignores the the start time and starts the playback at the beginning of the clip.
For example on MAC desktop using Safari the following starts the video at 35.72 seconds in and stops 44.26 seconds in. On the iPad it starts at 0 seconds.
<object width="565" height="400" classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="QTplugin.cab"
id="qtmovie_object" style="behavior:url(#qt_event_source);" >
<param name="src" value="http://bucket.s3.amazonaws.com/1089.mp4">
       <param name="autoplay" value="true">
       <param name="loop" value="true">
       <param name="postdomevents" value="true">
       <param name="Scale" value="aspect">
       <param name="starttime" value="35.72">
       <param name="endtime" value="44.26">
        <embed id="qtmovie_embed"
                postdomevents="true"
                autoplay="true"
                loop="true"
                width = "565"
                height = "400"
                scale = "aspect"
                cache = "true"
                starttime = "00:00:35:21.6"
   endtime = "00:00:44:7.8"
   src="http://bucket.s3.amazonaws.com/1089.mp4">
    </embed>
    </object>

bobmagan wrote:
It fires on both onactivate and onfocus. I had to do that to work on the Mac clients. Look at the code:
onactivate="get_select_list_xml1(this,$x('P507_FORMS'),$x('P0_LOGIN_SCHOOL_YEAR'),this,'REFRESH_REPORT_LAYOUT_LOV');" onfocus="if((typeof this.onactivate)!='function'){get_select_list_xml1(this,$x('P507_FORMS'),$x('P0_LOGIN_SCHOOL_YEAR'),this,'REFRESH_REPORT_LAYOUT_LOV');}"What about just
onfocus="get_select_list_xml1(this, $x('P507_FORMS'), $x'P0_LOGIN_SCHOOL_YEAR'), this, 'REFRESH_REPORT_LAYOUT_LOV');"If not, supply the following information:
<li>Full APEX version
<li>Full DB version and edition
<li>Web server architecture (EPG, OHS or APEX listener)
<li>Browser(s)/version(s) used
<li>Theme
<li>Template(s)
<li>Region/Item type(s)
and the <tt>get_select_list_xml1</tt> JS code.
Post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.

ITunes 10.6.3 for Win7 64 bit does not work for iPad apps

I have downloaded and installed iTunes 10.6.3 64 bit for Window 7 four times - and re-installed 3 times. When it asks if I would like to repair, I way yes. This does not correct the problem. I have an iPad 2 w/ 3G and Wi-Fi.
My problem is that while the iTunes on my Windows PC (running Windows 7 Professional, w/Service Pack 1 - 64-bit) will start, and will show my iPad when the iPad is connected, when I click on the iPad listing, and then on the Apps tab - this feature is basically unusable. This screen shows the basic Home Screen - with all icons dimmed, and then smaller versions along the right side of the basic home screen and my 2 others I've created.
1. All of the home screens shown - and all icons - are dimmed.
2. There is no list of apps along the left side.
3. Clicking on any of the home screens or on any of the icons does nothing.
Therefore I'm not able to choose any apps to sync from the iPad to the PC - nor am I able to re-position any of the apps from one screen to another.
4. Clicking on the Sync Apps button on top left - says "All existing apps and their data on the iPad will be replaced with apps from this (the PC's) iTunes Library. In other words, the only thing I can do is sync from my PC to the iPad - thereby wiping out any new apps on the iPad.
5. Clicking on the Sync button in the lower left does nothing.
So basically, there is no syncing from my iPad to the PC -- period.
HELP!!!
(Oh - also when I connect my iPad, it says there is an update to the 5.1 operating system and would I like to update, but when I say Yes, it warns that I have purchased software on the iPad that has not yet been transferred to iTunes and I should do that first. But of course, since I can't sync, I can't do that first.)

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

Safari not work for iPad mini after updated to ios 6.1.3

After updated to ios 6.1.3, Safari just not response. I cannot input any web address. Do anyone has this problem? Do anyone know how to solve it?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

MCPE Servers Not Working For iPad Mini

So, my friend and I were calling each other in FaceTime, and we both tried to get on a minecraft pocket edition server but it didn't work, we tried many servers, none of them worked. So I thought, maybe it's because we're FaceTiming, so I called my friend on my iPad mini 1. I tried it on my iPad mini 3 which is what I called my friend on before, and didn't work again! So I called my friend back on my iPad mini 3, and tried it on my iPad mini 1, when I tried it on my iPad mini 1, it worked. Weird. My friend used an iPad mini 2, and my version was iOS 8.1.2, for both my iPad mini 1 and 3, I have no idea what my friend's version is.. (MCPE version 0.10.4 alpha)

Los 6

Quicktime X not working

My quicktime has not worked for several months and for a while I just dealt with it and used other software. Now, I really need to be able to use it to play certain footage I have captured. I'm not sure if there are missing codecs or what might be causing the problem. It does not open at all - not even the correct logo is showing up under my apps.
I have Quicktime X, and I can't find it anywhere to download a new version of it.

Still waiting for a response. Someone must know.

TROUBLE Converting .MOV to .WMV w-Quicktime Pro

I've been using the EXPORT feature to convert a .mov file to a .wmv file but it will only export 30 SECONDS of any .mov file I try!! I also tried converting to a .avi file first. That didn't work either.
I have Quicktime pro.
G5
MAC OS 10.3.9
I have Flip4Mac also.
Does anyone know how to resolve???
imac G5 Mac OS X (10.3.9)

Thanks for the info. Why is is that QT Pro advertises media conversion then if it needs an additional Flip4Mac purchase to deliver the promise ?QT supports the "native" conversion of QT compatible formats and, with certain caveats, limited support to some non-QT compatible formats. Here is the list of SUPPORTED FORMATS. I don't see such proprietary Windows based formats as WMV, DivX, XviD, 3ivX, MS-MPEG4 v1-4, etc. listed among them. QT is not a universal converter any more than GM is a universal maker of auto parts for all automobile manufacturers.
On a separate note, doesn't iMovie do everything that QT Pro promises to do ? If so, is QT pro not needed for people with iMovie ?With regard to conversions, yes, iMovie includes internal access to the same QT structures as the QT Pro Player with one possibly important difference. QT Pro can transcode directly between fully supported compression formats while iMovie must convert them to DV first. This does mean a "double conveersion" is required in most cases and does open the door to possible loss of quality. In addition, QT Pro is capable of a number of file presentation/playback manipulations that iMovie cannot duplicate.

Exporting .mov to H264 in Quicktime Pro not working for iPad!

Similar Messages

Maybe you are looking for