Exporting movie from final cut express4 direct to apple tv

How can I export my completed movie from final cut express 4 to apple tv? This will be my first attempt. I have looked at the forum but cannot find a solution. I am fairly new to computing, (oap)!

Welcome to the  Discussion Forums.
The easiest method would be to export using Quicktime conversion and select the 'movie to Apple tv' option from the resultant dialogue box.

Similar Messages

  • TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

    when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
    i need to submit this movie for uni project tomorrow.
    any help/advice will help . thanks.

    According to Crash Analyzer
    -50 (QuickTime)
    This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
    good luck

  • How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

    Hi
    I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
    Here are the settings:
    HD:
    1 Video CODEC                 XDCAMHD50
    2 Wrapper format           QuickTime Self-Contained
    3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
    4 GOP                                   Long GOP
                                                 Closed GOP
    5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
    6 Movie version               UK Home Video Version
    7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
    1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                              1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
    2 Resolution                      1280 x 720
                                               1920 x 1080
    3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
    4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
    5 Chroma format              4:2:2
    1 HD audio format           24 bits/sample 48 kHz sampling rate
    2 Track layout                    Track 1 – 2.0 Stereo L mono
                                                Track 2 – 2.0 Stereo R mono
                                                Track 3 – L
                                                Track 4 – R
                                                Track 5 – C
                                                Track 6 - Low frequency effects LFE
                                                Track 7 – L Surround
                                                Track 8 – R Surround

    First of all, what are your sequence settings?  Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this).  Do you have a surround sound mix?  
    You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs. 
    Do you understand about safe zones for graphics?  If not, post back.
    I don't see any option to set the GOP in xdcam in compressor.  This may be built in to the xdcam format.
    I don't see any option for 720 xdcam hd in compressor. 
    There are many other tools available for this kind of work, but they may be out of your price range.  You might want to just find a facility with experience in deliverying this sort of thing.

  • Is it possible to export video from Final Cut X to DSR-PD175 mini DV camera

    Hi,
    Recently i buy on 27inch iMac with Final Cut Pro X installed.
    Also I buy Thunder bolt to firewire adapter & firewire cable from Apple.
    Now i am abel to capture my video from DSR-PD175 mini DV camera to FCP X.
    How can i export video from Final Cut X to DSR-PD175 mini DV camera?
    Please advise....
    Thanks & Regds
    Abin Thomas K.

    II'm afraid not.
    Not digitally anyway. Maybe by going to a monitor that has analoh AV output to the camera.
    Probably Premiere. Or old FCP7.

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • Exporting files from Final Cut Pro in Snow Leopard

    I am using Final Cut Studio 2. I recently upgraded to Snow Leopard. Before the upgrade when I would export files from Final Cut the dialog box would automatically go to the last used folder location. Now, each time it goes to the system hard drive. Is there a way to fix this?
    Thanks

    Fix what?
    Just choose the correct folder to which to export.

  • Can't Export Video from Final Cut Pro

    After updated to OS Maverick, I can no longer export video from Final Cut Pro.
    It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
    ANYONE CAN HELP??

    10.0.2, I think this is where the problem is.
    I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

  • Why they ask me get a compressor from App Store to export video from final cut since I use mavericks

    How can I export video from final cut can't do again since I have got maverick

    What happens when you have the project active in the timeline and press the Share button?

  • How to up the DPI on exported images from Final Cut

    Is there a way to export stills from Final Cut that are 300 DPI, I think they are exporting at 72 DPI? 
    Catherine

    DPI is a measure of density of pixels. It tells us nothing about the printed size of the image (width in inches x height in inches)
    A 1200 x 900 image @ 300 dpi yields a 4" x 3" image when printed.
    That same size (in pixels) image printed at 100 dpi will yield a 12" x 9" print.
    The number of picture elements (pixels) is exactly the same between the two prints but the one in 100dpi image are 3x larger - which will yield a softer image when viewed from the same distance as the 4"x3" 300dpi image.
    However, if you view the 300dpi 4"x3" print from 2' away and view the 100dpi 12"x9" print from 6' away - they will appear the same.
    Discussions of finding meaning in DPI is difficult without knowing how the final will be viewed.
    fwiw - I've made poster size prints at 75 dpi that looked just fine when viewed from 10-12'.
    x

  • When saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

    when saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

    I've shutdown, restarted and opened project and saved again. but it still reads the same...

  • What file type to export vid from final cut to studio pro

    Beginner here, the question I have is what is the best file format to export from final cut to studio pro so that I will play in a decent to good quality on a DVD that I make in studio pro. Thanks.

    For my FCS projects, I export DV_NTSC "anamorphic" (I use 16:9 format) to a "reference" movie: that is quite fast after all rendering is completed and the resulting file is pretty small. The only disadvantage to "reference" I've found is that you must keep all those FCS file around since those are what is referenced by the export.
    I export like that instead of exporting to compressor because for me, exporting directly to compressor is very slow; on my G5 Quad, my compression step is about 1:1 with real time.
    You can take those .mov files into DVDSP and let it do the compression using your defaults. I prefer to use Compressor directly so I can set the compression, Dolby, etc. parameters. Compress to mpeg2 and AC3 (Dolby Digital) and if you are just in stereo, just keep it in stereo, check the "no surround encoding" and make sure the highest audio level in either channel is -3db (or the compressor setting let you reduce the level by 3db). That prevents a downmix to mono (like on a cheap TV) from clipping (-3db + -3db = 0db. (zero plus zero = +3db and is clipping).
    Ed

  • .Mov from Final Cut Pro not playing on PC

    I've made a short video edited with Final Cut Pro. The file was saved as a .mov QuickTime movie. The demo looked great on a Mac but it has to go to people who only have PCs.
    Loaded the demo onto the hard drive of the PC, but the demo is showing poor resolution. It Loaded the latest releases of QuickTime, tried putting QuickTime in safe mode, tried re-setting the screen resolution and tried using different PCs. Still get the same fuzzy screen. Even tried saving the demo in different formats from Final Cut Pro, but still no better.
    Any suggestions? Thanks-- Foster

    I have the same problem and need a good solution. On 2 seperate PC's. I believe (but don't know 4 sure) that it is something to do with Quicktime not using the Windows direct X environment.
    You could try going into quicktime / Edit / preferences / quicktime preferences / advanced /tick the safe mode GDI only circle ... restart quicktime and try again.

  • Exporting video from Final Cut Express to be put on the internet

    Is there a way to export a flash file from Final Cut Express? I have a short video I am trying to put on my web site and I am finding that every format I try people who are using PC's are having trouble opening it. It all links back to Quicktime. Is there a way to not use Quicktime?

    It doesn't come with FCE. You need a Flash encoder. There are different ones of varying quality. Flash of course comes with one. Episode has Flash as an add-on. Do a google search for Flash encoders. Many encoders, after they're installed, will work directly from within FCE using the QuickTime Conversion function. There'll be a format option for Flash.

  • HT5148 export video from final cut pro x

    how can i export / share video from Final cut pro x (10.0.7)?  i have try different type and even use compressor, but did not see any final product.
    thanks

    I went into File and then share and then choose the format that i want (master file - default) then i choose a second hard drive in my computer.  and nothing happens at all

  • How to export videos from Final cut?

    I woud'l like to know what is the best way to export a video of 34min from Final Cut? after I'm gonna burn at Toast! and in Toast should I chose "dvd" or "video_TS"?
    I tryed already export with "sequence quicktime" and DV PAL 48 kHz and burn with "DVD", but didn't work.
    And export with "via le compression quicktime" in sequence quicktime, burn with "DVD and DivX" and didn't work too!
    Can somebody help me?
    thanks a lot

    my sequence is in Final Cut yet. The problem is, is an art work and every time I have to show somewhere, is diferents DVD players, so I tryed to play the one (exported by quicktime) in a dvd player quite old and actually worked but very bad, with errors! So, I trying to find a way more universal!! that I can play anywhere! Should I export by "compresseur" and Mpeg2 something like this, or "compresseur quitktime" and .avi??
    thanks
    Rafaella

Maybe you are looking for

  • Music not playing in itunes 8.02, seems like a constant pauze/freeze

    Hey, so lately I've been having he problem that my itunes has stopped playing music. I'd select a song and click play and nothing happens, and browsing to a different point in the song doesn't help - it never plays and the song seems frozen. Youtube

  • How to adjust individual RGB channels?

    Hi there, is is possible on a iMac to adjust the individual RGB channels? if so, how? if not, is there anyway to control the colour temperature of the screen? thanks

  • V$osstat and V$SYS_TIME_MODEL - how to get CPU time from instance

    Hi there ! I have a function osstat, which take stats from the os using v$osstat (credits for the procedure to a person, I regret to say, that I cant remember his name). But since we have 9 databases on the same server (and we dont have access to the

  • Why does Merge Join needs its sources to be sorted

    Hi, Can anyone explain why Merge Join needs its sources to be sorted ? I saw an explanation in another thread that this is the way to not load all the data to memory, but isnt the data that is about to be merged already all in memory becuase the SORT

  • Picking location determination for STO

    Hello All, Please i need help for the scenario described below: Material X exists on storage location 1234 and 5678 in Plant 1000. Also, this material can be transported to other Plants from any of this storage location. Currently, I have configured