Exporting movie in final cut

if i have a project that i shot in 4:3 aspect ratio and i matte it out to either a 1:85:1 or 2:35:1, is there a way to export it where the outputted video is of that aspect ratio and not showing the black, matted out parts at the top and bottom? for example, ive played video in quicktime where u see the matted out areas. but in certain cases, it plays the video in 16:9 or 2:35:1 ratios in the whole quicktime screen without showed the parts that were cropped out. any help would be appreciated. thanks.

I've only been able to get this to successfully happen via Compressor. What I did (and it was to put clips online for my reel) was to do my normal compression settings (which was 320x240 for frame size) then under the Geometry pane I would manually pull in the crop handles in the preview window. Then I had to set the Frame Size to 50% of original, otherwise it would distort the image once the crop has been applied. There might be an easier way.....

Similar Messages

  • TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

    when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
    i need to submit this movie for uni project tomorrow.
    any help/advice will help . thanks.

    According to Crash Analyzer
    -50 (QuickTime)
    This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
    good luck

  • Exporting movie from final cut express4 direct to apple tv

    How can I export my completed movie from final cut express 4 to apple tv? This will be my first attempt. I have looked at the forum but cannot find a solution. I am fairly new to computing, (oap)!

    Welcome to the  Discussion Forums.
    The easiest method would be to export using Quicktime conversion and select the 'movie to Apple tv' option from the resultant dialogue box.

  • Exporting movie in final cut express to quick time movie

    Does anyone know what ERROR : Not enough disk space means when trying to
    export my movie to quick time movie?

    It means exactly what it says.
    Look in Finder, at the bottom of the window to see how much free space the drive you are trying to save to, has.
    What Sequence setting are you using and how long is your project?

  • How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

    Hi
    I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
    Here are the settings:
    HD:
    1 Video CODEC                 XDCAMHD50
    2 Wrapper format           QuickTime Self-Contained
    3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
    4 GOP                                   Long GOP
                                                 Closed GOP
    5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
    6 Movie version               UK Home Video Version
    7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
    1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                              1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
    2 Resolution                      1280 x 720
                                               1920 x 1080
    3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
    4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
    5 Chroma format              4:2:2
    1 HD audio format           24 bits/sample 48 kHz sampling rate
    2 Track layout                    Track 1 – 2.0 Stereo L mono
                                                Track 2 – 2.0 Stereo R mono
                                                Track 3 – L
                                                Track 4 – R
                                                Track 5 – C
                                                Track 6 - Low frequency effects LFE
                                                Track 7 – L Surround
                                                Track 8 – R Surround

    First of all, what are your sequence settings?  Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this).  Do you have a surround sound mix?  
    You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs. 
    Do you understand about safe zones for graphics?  If not, post back.
    I don't see any option to set the GOP in xdcam in compressor.  This may be built in to the xdcam format.
    I don't see any option for 720 xdcam hd in compressor. 
    There are many other tools available for this kind of work, but they may be out of your price range.  You might want to just find a facility with experience in deliverying this sort of thing.

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • Quicktime Export Components in Final Cut Server

    Our company has purchased a number of Elgato h264 encoders and we're loving them. They reduce our h264 compression times on average from 15-20 mins down to 2-3 mins. It usually compresses our videos faster than real time. Which as a news organization is great for us. These encoders work great on all our Macbook Pros & Mac Pro systems. I've now installed one onto our final cut server and set up a custom compressor setting. Under the 'encoder' tab the file format had to be set to "Quicktime Export Components" instead of "Quicktime Movie" to use the Elgato. And it works great when I send a single file threw compressor. BUT I can't get this custom preset to show up or work inside Final Cut Server. I have other custom settings that do show up and work (but they are all "Quicktime Movie" file formats). I've rebooted multiple times and looked under multiple Responses transcode settings, but the new one I've created to use the Elgato never shows up.
    Is it possible to use Quicktime Export Components in Final Cut Server?
    I couldn't find any mention of this in the FCS admin manual or any other posts in the forums regarding this.

    I have seen on MediaSilo.com a tip to get Elgato H.264 working with Compressor, but I can't seem to be able to find it. Basically, the trick was to create a duplicate setting in Compressor that Final Cut Server is able to read ( not as Quicktime Export Component), associate it with a Final Cut Server's compression setting and later reassign that setting in Compressor to Elgato.
    I will keep diggin' for this tip, it was actually a screen recording.

  • Correct way of importing an iMovie 6 movie into Final Cut Express?

    Hi,
    Many thanks in advance for your attention.
    Any correct way to import an iMovie 6 HD movie into Final Cut Express for further editing?
    I tried.
    1. I Exported the iMovie, at Full Quality and it made a Quicktime version of that movie.
    2. I then Imported this Quicktime version into Final Cut Express.
    3. The audio was smooth, but at regular intervals, the video freezes for a second (and then moves on).
    4. The movie plays smoothly back in its original iMovie incarnation and in its Quicktime incarnation. Only in Final Cut Express is there this intermittent freezing. Stop and start.
    5. I have Final Cut Express 3.5.1 and iMovie 6 HD.
    Thank you,
    - Ross

    "Full Quality" QuickTime export from iMovie gives you a DV stream which will need rendering in FCE. Rather than "Full Quality," choose "Expert Settings," and then the following:
    Video
    DV-DVCPRO - NTSC (assuming you're in USA)
    Sound
    48kHz
    16-bit

  • Is it possible to export video from Final Cut X to DSR-PD175 mini DV camera

    Hi,
    Recently i buy on 27inch iMac with Final Cut Pro X installed.
    Also I buy Thunder bolt to firewire adapter & firewire cable from Apple.
    Now i am abel to capture my video from DSR-PD175 mini DV camera to FCP X.
    How can i export video from Final Cut X to DSR-PD175 mini DV camera?
    Please advise....
    Thanks & Regds
    Abin Thomas K.

    II'm afraid not.
    Not digitally anyway. Maybe by going to a monitor that has analoh AV output to the camera.
    Probably Premiere. Or old FCP7.

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • Exporting files from Final Cut Pro in Snow Leopard

    I am using Final Cut Studio 2. I recently upgraded to Snow Leopard. Before the upgrade when I would export files from Final Cut the dialog box would automatically go to the last used folder location. Now, each time it goes to the system hard drive. Is there a way to fix this?
    Thanks

    Fix what?
    Just choose the correct folder to which to export.

  • Can't Export Video from Final Cut Pro

    After updated to OS Maverick, I can no longer export video from Final Cut Pro.
    It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
    ANYONE CAN HELP??

    10.0.2, I think this is where the problem is.
    I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

  • Command to Export project as Final Cut Pro XML from jsx script

    Hi All,
    Can somebody get me the command to export the project as final cut pro xml from jsx script.
    I was using the extension builder script earlier for cs6 panel development, so we were using pjct.exportFinalCutProXML("pathname");
    Now I am working for panel in Premiere CC so working on HTML 5 panel and qe dom scripting(.jsx).
    In some jsx examples i got there is script to export sequence as final cut pro xml but cannot get the code for project export.
    project.activeSequence.exportAsFinalCutProXML(entire_out_path);
    Also please let me know if there are any kind of reference available about all the functions and properties in the pe dom scripting for premiere pro cc.
    I am using premiere pro cc 7.1, windows 7, Eclipse Kepler.
    Thanks in advance,
    Anoop NR

    When you reimport the exported project XML to FCP, do you get the full project or just the single bin/sequence? If you get the full project then it sounds like you need Premiere help, not FCP help ... have you tried asking on the Adobe forums? If you only get the single bin/sequence then it seems you might have inadvertently selected those prior to creating the project export. Try making sure that your FCP Browser window is active and that you have not selected anything within that window prior to using the File > Export > XML command. If that still causes issue then you might try using an earlier FCP XML version.
    Hope it helps
    Andy

  • Why they ask me get a compressor from App Store to export video from final cut since I use mavericks

    How can I export video from final cut can't do again since I have got maverick

    What happens when you have the project active in the timeline and press the Share button?

  • OMF won't export out of final cut pro.

    Exporting a 93min 1920x1080 HD timeline to OMF
    5 second handles tried 2 second handles as well.
    OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
    Final cut 6.0.6
    Have deadline. Didn't see it on any forum. Help!! Thanks!!

    Seems like a weird thing to not be able to do since it's called final cut PRO...
    Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
    You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
    Shane

Maybe you are looking for

  • HT201304 how can I delete my card information from App *

    hello please, someone who can help me ? I wants to delete my Visa card information from App Store, but there is not an option. How I can do it ? thank you for your help.

  • Disable iPhoto auto launch w/ plist?

    I know you can disable iPhoto auto launch from the Image Capture app, but I would like to know where Image Capture saves its preferences so I can disable it by editing or replacing a plist. I need to change preferences on a whole lab of Macs, and I w

  • Use SSO with non-Oracle COTS?

    Can non-Oracle COTS software such as Maximo and Documentum be setup as partner applications in the SSO server? What about IIS applications?

  • Schema register ORA-01792 1000 column limit

    I am trying to load and register the XFORMS schema (from the W3C). It loads fine, but fails to register ERROR at line 1: ORA-31084: error while creating table "MM"."XT_SELECTMANY" for element "selectMany" ORA-01792: maximum number of columns in a tab

  • How to change password (bios)??

    Please help me to get bios password Compaq mini 110c-1020sl, CNU9271R2V. Tkank you very much!!!!!!!!! This question was solved. View Solution.