Exporting Multichannel MXF: Difference between adaptable and standard tracks

Hello:
I have to export a mxf file with 4 channels:
-1st channel: program stereo (L)
-2nd channel: program stereo (R)
-3rd channel: program stereo (L)
-4th channel: program stereo (R)
I have a master stereo .wav, when creating the sequence, what is the difference between these two options?
1:
-Making all the tracks standard, putting the master both in 1st and 2nd tracks
-A1: output 1+2, A2: output 3+4
2:
-Making all the tracks adaptable, putting the master only in 1st track
-A1: output 1+3, A2: output 2+4
I don't understand what does Premiere do with adaptable tracks, how does it distributes the master's two channels?
Thank you very much

Ok, interesting update!
I opened two new projects in CS5, and imported the "problem" CS3 P2 export footage. One project was preset to 1080p 24, the other set to 1080i 60. Still pixelated in the 1080p, but clear in the 1080i project, only when paused. Still pixelates when playing, even though resolution in the project window is set to full during both playback and pause. That's good enough for me! It would appear that even though the footage was shot in progressive mode, it still needs to be a 1080i project. Also, simply opening the CS3 project in CS5 and allowing automatic conversion opened the door to failure. I read somewhere that CS5 is more strict about formats than prior versions, and it appears to be true.
Also, I've read that DVCProHD footage out of the HVX-200P is not really progressive, regardless of 24p mode settings. That also seems to be true, based on this experience.
I'm still going to burn a BD-R just to make sure, and if I feel like blowing a second BD-R, I'll test the 1080p project export as well. Hopefully, this thread can help others with similar footage. I'm still curious what changes in the CS5 coding manifests this issue, where it didn't in CS3. I imagine that will only be answered by one of the developers that wrote the code, or another Adobe employee that knows via said developer.

Similar Messages

What is the Difference Between Adapter and Proxy

Hi Master,
I want to know the Difference Between Adapters and Proxies.
And when we are using proxies and Adapters....
Regards,
SReddy

Adapters are part of the Adapter Framework. Adapters provide the technical connectivity to enable the integration of SAP and non-SAP applications through XIs Integration Engine.Again, Adapters are used for connectivity from and to external systems with XI that cannot communicate via proxies.Adapters are only required in SAP systems older than 6.20 and external systems.
Systems based on 6.20or higher can communicate directly with proxies.
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages.
Proxies are generated from Message Interface in IR.
The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with. The Proxy Runtime currently has the following components available: 1. ABAP Proxy Runtime Communication using XI or Web Services a. Web Service Runtime 2. Java Proxy Runtime Communication using XI (J2EE) The objects that the Proxy Runtime then controls are created via Proxy Generation, for both ABAP and Java. In the following sections a client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context). Conversely, a server proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).

Brightness differences between Menus and Video Tracks

I am trying to learn DVD Studio Pro 3.
My project has a "roster" menu that leads to several submenus. I want an animated transition from the "roster" menu, to each of the submenus.
I built each of the animations in After Effects. They all start with the same first frame -- the "roster" menu. Each animation has a different ending frame -- one of the submenus. I rendered the animations as QuickTime movies in After Effects.
Also in After Effects, I used the "Save frame as" menu to make a flat .PSD file of the first frame (for the "roster" menu,) and each end frame (for the submenus.)
I imported all the files into DVD Studio Pro. I laid out the menu structure, drew buttons, and connected them all the way I wanted. Each button on the "roster" menu points to the start of a track, and the End Jump of that track points to a submenu.
The logic of all this works the way I expect, both in DVD Studio Pro's simulator, and on a burnt DVD. However, there is a noticeable brightness difference between the video tracks and the menus.
How can this be, if they are derived from the same graphic source?
Mac OS X (10.3.9)

There could be a ColorSync issue with the PSD. Either take it into Photoshop and try no ColorSync (or a different setting), or take a single frame of the video and make it last a while, and use that as a motion menu.
I have cured these differences both by changing the ColorSync settings of the PSD, and also by setting the monitor to generic RGB. That was enough to make DVD SP ignore the ColorSync settings in the PSD I was using.

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?
What situations are better to export to to .PNG or .JPG?
J

iPad apps are designed specifically for the iPad and will not run on the iPhone or iPod Touch. iPhone/iPod apps will run on the iPad, but will only take up an iPhone sized portion of the iPad screen (though you get a 2x button which effectively doubles each pixel in both directions so may appear pixelated). There are also 'universal' apps (which have a '+' symbol against them in the store) which have processing in them to recognise the device that they are on and will tailor the display accordingly (so will make use of the iPad's larger screen).

In jdbc adapter what is the difference between insert and update insert

in jdbc adapter what is the difference between insert and update insert
Edited by: katru vijay on Mar 22, 2010 7:43 AM

Please refer to this Link [Document Formats for the Receiver JDBC Adapter|http://help.sap.com/saphelp_nw04/Helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm]
Hope this helps.
Regards,
Chandravadan

Difference between Report Template "Standard (PPR)" and "Standard"?

What is the difference between Report Template "Standard (PPR)" and Report Template "Standard"? What does PPR mean and what makes it different? Why would you use PPR rather than just standard?
Thanks,
Linda

Hello,
PPR (Partial Page Refresh) is just a term used to describe some AJAX pagination and sorting functionality, it's just a holdover from before the term AJAX existed.
You can just change the template and on your report to enable that functionality. In 3.0 it will just be on off switch in your pagination options.
Carl
Message was edited by:
Carl Backstrom

Difference between Adaptive RFC and Adaptive RFC2 model

Hi,
What is the difference between Adaptive RFC and Adaptive RFC2 model ?
Regards,
Sunaina Reddy T

Hi
Main difference are
1.JCo 3.0 to connect to SAP Systems
2.Improved connection management
3.Faster performance
4.Lower memory consumption
5.SystemLandscape API is no longer needed
6.Compatible to ARFC1 to allow easy migration
Check the thread for further input
1.[Whatu2019s New in Web Dynpro Java?|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8062c7d3-c86f-2b10-4894-a9a323da20b3]
Best Regards
Satish Kumar

Difference between Adaptive webservice and deprecated one

Hi Experts,
Plz anyone tell me the exact differences between Adaptive web service model and deprecated model.
Also plz explain how an adaptive web service is working.
Thanks in advance,
john

Hi John
In old webservice No support to import URL which requires authentication but in adaptive web service
Allows importing WSDL through URL which requires authentication
In old web service Logical Ports are available at design time
In adaptive web service Logical Ports are not available at design time
In old web service No direct support for nested structure, thus application programmer has to manually bind the
In adaptive web service Direct support of nested structure , no such manual binding is required
These are the diffreense between old web service and adaptive web service
Regards
Ruturaj

Difference between poh and pov in module pool programming

hi all,
                   pls tell me difference between poh and pov and how i check validation in screen

Hi,
POV gives you F4 help.
like:
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD f MODULE mod.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field f, the system calls the module mod belonging to the FIELD statement. If there is more than one FIELD statement for the same field f, only the first is executed. The module mod is defined in the ABAP program like a normal PAI module. However, the contents of the screen field f are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These alll have the prefix F4IF_. The most important are:
·        F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
·        F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The self-programmed value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT demo_dynpro_f4_help_module.
TYPES: BEGIN OF values,
         carrid TYPE spfli-carrid,
         connid TYPE spfli-connid,
       END OF values.
DATA: carrier(3) TYPE c,
      connection(4) TYPE c.
DATA: progname TYPE sy-repid,
      dynnum   TYPE sy-dynnr,
      dynpro_values TYPE TABLE OF dynpread,
      field_value LIKE LINE OF dynpro_values,
      values_tab TYPE TABLE OF values.
CALL SCREEN 100.
MODULE init OUTPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'CARRIER'.
APPEND field_value TO dynpro_values.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE value_carrier INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            tabname     = 'DEMOF4HELP'
            fieldname   = 'CARRIER1'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CARRIER'.
ENDMODULE.
MODULE value_connection INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT carrid connid
    FROM spfli
    INTO CORRESPONDING FIELDS OF TABLE values_tab
    WHERE carrid = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'CONNID'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CONNECTION'
            value_org   = 'S'
       TABLES
            value_tab   = values_tab.
ENDMODULE.
*POH gives you F1 documentation:*
like:
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
       VAR(4),
       INT TYPE I,
       LINKS TYPE TABLE OF TLINE,
       FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
    WHEN 1.
    VAR = '0100'.
    WHEN 2.
    VAR = '0200'.
    INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
       EXPORTING
            DOKLANGU                      = SY-LANGU
            DOKTITLE                      = TEXT-002
            CALLED_FOR_TAB                = 'DEMOF1HELP'
            CALLED_FOR_FIELD              = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
       EXPORTING
            DOKCLASS                      = 'TX'
            DOKLANGU                      = SY-LANGU
            DOKNAME                       = 'DEMO_FOR_F1_HELP'
            DOKTITLE                      = TEXT-003
       TABLES
            LINKS                         = LINKS.
ENDMODULE.
Regards,
Renjith Michael

What is the difference between ABAP and HR-ABAP?

Hi people,
Could u just tel me abt what is the difference between ABAP and HR-ABAP?
Thanks in advance,
Sanjeev K.V

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
Also,
HR:
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
For Personal Admn the Infotypes start with PA0000 to PA1999
Time Related Infotypes start with PA2000 to PA2999.
Orgn related Infotypes start with HRP1000 to HRP1999.
All custom developed infotypes stsrat with PA9000 onwards.
In payroll processing we use Clusters like PCL1,2,3 and 4.
Instead of Select query we use PROVIDE and ENDPROVIDE..
You have to assign a Logical Database in the attributes PNP.
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
And finally,
Few notes are below:
InfoSets in the HR Application
You can use SAP Query in HR to report on HR data. Queries are maintained as described in Creating Queries. The special features of queries created for HR are described in Maintaining Queries in the Human Resources Application. The maintenance procedure for HR InfoSets differs from the described procedure inasmuch as HR data fields are grouped together in infotypes.
InfoSet management in SAP Query is also used for InfoSet Query. For further information, see Functions for Managing InfoSets.
If you want to create InfoSets for HR, you can use logical databases PNP, PNPCE, PAP, and PCH (see HR Logical Databases). The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
The reports you can execute using InfoSets based on logical databases PNP (or PNPCE) or PCH are similar, but differ in that they can select different objects. The following table describes the connection between the logical database, and the infotypes you can include in an InfoSet. It also provides you with one or two examples of reports that you can execute using the appropriate InfoSets.
Logical database PNP/PNPCE* PCH PAP
Selection of Persons Objects from Personnel Planning Applicants
Infotypes that can be included in the InfoSet Infotypes for· Personnel Administration (0000-0999) · Time Management (2000-2999) · Payroll infotypes · Infotypes for Personnel Planning objects that can be related to persons If the object type is specified:· Infotypes for the object type · Infotypes for objects that can be related to the specified object typeIf the object type is not specified:· All infotypes · Infotypes for Recruitment (4000-4999)· Some infotypes for Personnel Administration (such as 0001 and 0002)
· Customer infotypes
Reporting examples · Selection of all persons who participated in a specific business event, output of prices for reserved business events · Selection of all persons assigned to a specific personnel area, output of qualifications held by these persons · Selection of all business events held in London in March, output of all persons who participated in these business events · Selection of all positions assigned to a specific organizational unit, output of all persons assigned to the positions · Selection of all applicants hired last year to work on special projects, output of addresses for the applicants selected
Logical database PNPCE (PNP Concurrent Employment) functions just like logical database PNP. The procedure for creating InfoSets is also the same. It only becomes significant if you work with Concurrent Employment.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the corresponding field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
§ Logical database PNPCE or PNP Personnel number
§ Logical database PAP Applicant number
§ Logical database PCH Object ID, plan version, and object type
6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using Drag&Drop.
7. To save the InfoSet, choose .
8. To generate the InfoSet, choose .
On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
sample code
START-OF-SELECTION.
GET pernr.
rp_provide_from_frst p0000 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0001 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0001-plans. " earliest.
endif.
endif.
rp_provide_from_last p0014 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0014 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0014-LGART. .
endif.
endif.

What is the difference between OEE and OSE

What is the difference b/w
Oracle8i Enterprise Edition and Oracle8i Standard Edition?
Which version I choose to install the Oracle Server?

The real difference between one and the another one are the options installed in the database. I have a document where you can see in detail what options have one and what options have the another one.
Which version I choose to install the Oracle Server?
r.- That is quite related to what options you need for your applications. Options like : partitioning, etc.
With this view you can see what options are available in your database.
SQL> select * from v$option;
PARAMETER VALUE
Partitioning TRUE
Objects TRUE
Real Application Clusters FALSE
Advanced replication TRUE
Bit-mapped indexes TRUE
Connection multiplexing TRUE
Connection pooling TRUE
Database queuing TRUE
Incremental backup and recover TRUE
y
PARAMETER VALUE
Instead-of triggers TRUE
Parallel backup and recovery TRUE
Parallel execution TRUE
Parallel load TRUE
Point-in-time tablespace recov TRUE
ery
Fine-grained access control TRUE
Proxy authentication/authoriza TRUE
tion
PARAMETER VALUE
Change Data Capture TRUE
Plan Stability TRUE
Online Index Build TRUE
Coalesce Index TRUE
Managed Standby TRUE
Materialized view rewrite TRUE
Materialized view warehouse re TRUE
fresh
Database resource manager TRUE
Spatial TRUE
PARAMETER VALUE
Visual Information Retrieval TRUE
Export transportable tablespac TRUE
es
Transparent Application Failov TRUE
er
Fast-Start Fault Recovery TRUE
Sample Scan TRUE
Duplexed backups TRUE
Java TRUE
PARAMETER VALUE
OLAP Window Functions TRUE
Block Media Recovery TRUE
Fine-grained Auditing TRUE
Application Role TRUE
Enterprise User Security TRUE
Oracle Data Guard TRUE
Oracle Label Security FALSE
OLAP TRUE
Heap segment compression TRUE
Join index TRUE
Trial Recovery TRUE
PARAMETER VALUE
Oracle Data Mining TRUE
Online Redefinition TRUE
Streams TRUE
Very Large Memory TRUE
File Mapping TRUE
48 rows selected.
SQL>
Joel P�rez

Difference between adaptive tracks & normal Mono

Sorry - I can get it.
Target is to export Multichannel MXF for broadcast use.
I have to put PGM Audio on Track 1+2 and international Feed on Track 3+4.
I can do that in two ways I guess and I don't understand whats the differece.
Creating a 4-Track Mutlichannel Sequence with Stereo Tracks - map Audio Track 1 (Stereo) to Channel 1+2 and Audio Track 2 (Stereo) to Channel 3+4. Done!?
Or - creating an adaptive Sequence with 4 Channels mapped to 1 - 2 - 3 - 4 and route every Track seperatly to it's corresponding Channel. Of course, that way I can handle every Track seperatly but is this better to get my MXF Export right?
Sorry, if my english is weird - it's not my native tongue.

If they both produce the desired results, use whichever you prefer.

No difference between High and Normal output sharpening

I was going to post a topic about how small is difference between screen output sharpening settings, when some tests revealed that in fact the difference is nil.
b Can anyone see any difference between Normal and High screen sharpening in applied at export?
I even stacked the two versions in Photoshop with the Difference blending mode on and a Levels adjustment layer amplifying the difference, and even the histogram was showing that I'be got big plain black rectangle.
Sharpening for paper seems to work fine.
Lightroom 2.3 Windows.

Just took the time to test this on my 'calibration' image and there is indeed no difference in Standard and High sharpening for screen.
Same result with and without resizing image; with and without jpeg compression; with both tif and jpeg files.
Lr 2.3 on XP.

Difference between GUI_UPLOAD and WS_UPLOAD

Hi,
Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
Thanks,
Satish

I would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES.   Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
         exporting
              filename                = filename
              filetype                = 'ASC'
         changing
              data_tab                = iflatf
         exceptions
              file_open_error         = 1
              file_read_error         = 2
              no_batch                = 3
              gui_refuse_filetransfer = 4
              no_authority            = 6
              unknown_error           = 7
              bad_data_format         = 8
              unknown_dp_error        = 12
              access_denied           = 13
              others                  = 17.
Regards,
Rich Heilman

What is the difference between avi and mov

Hi FCP users,
I am actually an audio guy, but I would like an answer on something.
I work with Logic, and usually use quicktime movies when I am working to movies. But I am working with a client who is an Avid user and swears by avi files. Can someone explain to me the difference. My client explained to me that avi's are better than mov files. He claims their file sizes are bigger, so therefore there quality is better. He said there is some form of compression on quicktime movies which lessen the quality to avi, even if the mov is uncompressed apparently the quality is still less than an uncompressed avi. If this is not true, could someone give me the real big difference between the two.
I thought is was more of a preference, like windows users prefer wav, and apple users like quicktime movies. Like with audio, there isnt a huge difference between aif and wav. Windows users prefer wav and apple users aif.
Thanks in advance for any information.

gazo wrote:
The vid guy has sent me some files to work with. So I am working in Final Cut to edit some of the video, and then sending it back to him. He is working on PC with Avid. What is the best. Should I convert the avi files he has sent to me to mov files. Then pull these into FCP, and then export it out as avi for him. Or should I export out as mov, and then he converts them to avi when he pulls it into Avid on his PC? Very confusing which is the best procedure between Mac and PC.
Thanks in advance for any help.
This is a disaster in the making. You can avoid being part of the train wreck by either renting an Avid, going to live at his house, or telling him to get a Macintosh.
You must find the lowest common denominator video format that will work on both of your systems. That could be conventional DV, dunno, never used Avid and never tried to edit anything on a PC. But I can tell you this with absolute certainty, it will be easier and, in the end, much less expensive for one of you to adopt the other's platform for the duration of this project. The time you waste transcoding, arguing, formatting your drives, buying secondary products, fitting round pegs into square holes, and trying to find a workable solution (that will keep changing as the project gets more complicated) will cost you much more in terms of money out of pocket and creative frustration than simply buying/renting another station.
bogiesan

Exporting Multichannel MXF: Difference between adaptable and standard tracks

Similar Messages

Maybe you are looking for