Exporting multiple audio channels from Premiere Pro CS6 in MXF OP1a

I have a Premiere Pro project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. I make sure that none of the channels are muted.
Result:
The rendered file contains 8 channels as I want it to, but only the first two channels contains audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
Any ideas what I can do?
Thank you for your help!

Hey Guys,
I'm having problems exporting an 8 channel audio mxf for a broadcast client. The mix they want is as follows:
Track 01: Full Programme Mix L
Track 02: Full Programme Mix R
Track 03: International Sound L
Track 04: International Sound R
Track 05: Music and Effects L
Track 06: Music and Effects R
Track 07: VO Mono
Track 08: Interview Mono
I have setup the sequence following this video on vimeo and am fairly confident I have the sequence settings correct. https://vimeo.com/38501157
I also can export a multichannel mxf. But all my tracks are exported as mono and I am therefore not maintaining my L and R as set up in my sequence
The problem is on exporting that since Tracks 01 and 02 are bounced down to 1 + 2 it means that my Track 01 (Panned L) is getting bounced down onto my Track 02 aswell and thus it does not remain seperate. Has anyone delivered a similar format for a broadcaster and come across this problem with Premiere Pro and know a solution?
Any help would be much appreciated
Thanks
Eamonn

Similar Messages

Media Encoder CS6 Not Exporting all Audio Tracks From Premiere

I'm working with DSLR footage, 2 Channels of .WAV audio from an exernal recorder (H4N), and a 1 channel .WAV Music track. 3 Channels total of .Wav audio.
I can export from Premiere Pro CS6 to H.264 just fine, but if I try to send it to Media Encoder, it only track 3, which has the music.
I can't figure out this issue, and haven't found an answer on any forums. This problem effectively makes Media Encoder useless to me, so I would prefer it to be solved, rather than find a work around.
Thanks in advance for your help!
Mark

I'm having the same problem. But even worst.
For the test, I take a 10 min .mov or mp4 file, simply modify the "scale", and hit the export.
a 10 min file is taking 4 hours to render.
This is on a:
2012 MacBookPro i7 2.3Ghz, 16 GB 1600 DDR3, SSD disk. - Mac OSX 10.7.5
and a:
2011 iMac i7 3.7Ghz, 16 GB 1333 Mhz, 7200 RPM HD - Mac OSX 10.7.5
The CPU stays at 90% idle the whole time.
I know this is an old thread, but maybe someone could give me a hand.

Audio not transferring to Encore from Premiere Pro CS6

I'm trying to export a sequence through the Adobe Dynamic Link from Premiere Pro CS6 to Encore and the audio is not transferring with video. The video is 30 minutes long with multiple video and audio tracks. The video came through fine, but no audio track. However, I also brought a timeline into the project that was less than 3 minutes and the audio track came with it. Any suggestions/help much appreciated! Thank you!

Yes--that is correct. Audio track in Premiere but no audio track present in Encore. I believe the audio format in Premiere is Stereo. It is HD footage shot on a C-100 camera. The sound was recorded into the camera and all brought in together. I did end up doing the work around that was suggested and just exported an MPEG2-DVD and pulled the audio in manually. But, would love to try to figure out how to make it work directly using Adobe Dynamic Link. Any suggestions are greatly appreciated!

Exporting multiple audio channels Final Cut 6

Does anyone know how to export multiple audio channels out of Final Cut Pro 6 from one quicktime export?

You want a multichannel QT, or AIFF files of the individual channels with one step?

Editing Multiple Audio Clips From Premiere in Audition

Hi there,
I am working with video/audio in Premiere that has frequent cuts (although the audio is derived from two files) and I need to edit all the audio files at once, rather than one by one, in Audition. I was hoping to this by nesting the audio in Premiere but I am not able to edit the nested file in Audition after this.
If anyone has any ideas of how to work with and apply the same properties to multiple audio clips from Premiere in Audition I would greatly appreciate it.
Thanks...

Hi everyone, I also have a trouble with cs6. I just record 3 tracks in the early today, then when I got home, I saved as sexs file ( wrong decision). After that, I went back and try to open the file, it can't file the recording tracks. The only one thing still exist is my beat, what should I do to recovered it? thanks for helping me out of this.

Problems exporting mpeg 2 videos using Premiere Pro CS6 and Media Encoder

Using a Mac, I'm trying to exporting an mpeg 2 video from Premiere Pro CS6 using the queue process that opens the Media Encoder but when the process begins, it freezes and doesn't end.

Using a Mac, I'm trying to exporting an mpeg 2 video from Premiere Pro CS6 using the queue process that opens the Media Encoder but when the process begins, it freezes and doesn't end.

Audio and video not synchronized when exporting from Premiere Pro CS6

Hi
We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
We have 2 audio lines activated and sounding on this project.
The question is:
When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
And Inside Premiere Preview audio is preety correct.
Does anyone here are getting such problem?
Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
Thank you for the help
Gustavo.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Exporting AVCHD for BluRay in Premiere Pro CS6

Hello,
I have AVCHD files taken with a HD camcorder at its highest quality settings (HD FX - 1920 x 1080 - 24Mbps - H.264AVC). I am looking for the most appropritate workflow to edit these in Premiere Pro CS6 and burn them over to BluRay using Encore, while maintaining the original quality of the AVCHD files. Currently when I import the files into Premiere Pro, and preview the video clips in the sequence, the video appears as it does in the original files. In PrPro, the properties of the AVCHD files indicate that they are at 29.97 fps, 1920 x 1080, with square pixels (1.0). However, after exporting the sequence from Premiere Pro (via Media Encorder) to Encore, the video appears to have some jagged edges with some loss of video quality, and I would like to resolve this issue. For the export settings I am using the H.264 BluRay default settings. Please provide details on the correct/most appropriate settings that should be used to export the PrPro sequence to Encore with the above mentioned AVCHD files to Encore for recording onto BluRay while maintaining the original file quality. Thanks.

Seaspray - I will let the experts correct any bad advice here and perhaps I am adding nothing you already don't know or are doing. I recently went through the same exercise being new to PP CS6. Is that footage interlaced? I first drug a sample clip to the New Item button to create a matching sequence. I had some issues when I wasn't being careful about sequence settings matching, particularly putting interlaced in a progressive sequence. When I was ready to export, I chose the H.264 Blu-ray preset closest to my source footage. I made sure the key video characteristics matched - frame size, frame rate, progressive vs. interlaced, if the latter upper or lower, PAR, etc. etc. In some cases I tweaked VBR vs. CBR and bit rates. I then produced separate .m2v and .wav video/audio files. Then I imported those files as assets into Encore. You should then see Encore tell you it does not need to encode the video or audio after analysis. Unfortunatley, this process does require one encoding, but I don't believe there is anyway around that matter as PP CS6 apparently does not support "smart rendering". However, I think with just one encoding you are not going to see your footage noticeably degraded. Agreed, none of the monitors in PP or Encore should be used to judge quality. I also noticed major differences playing back files on my PC with various media players vs. PS3 + big TV.

Encore CS6 crashes when importing from Premiere Pro CS6

When sending a project to Encore as a Dynamic Link from Premiere Pro, Encore hangs then a message pops up that it has stopped responding then closes. How do we get this to work?
The computer has an Intel Core i7 processor, 16GB of RAM and is running Windows 7 Pro x64 with Service Pack 1. Adobe CS6 Master Collection is installed. The computer is joined to a Windows Server 2012 domain and the user of the machine has local administrator rights.
The Adobe suite has been uninstalled and re-installed multiple times without success. Sometimes after re-installing, sending a Dynamic Link to Encore will import as expected once, but then after restarting the computer, the problem will occur again. This has been tried with and without installing any Adobe updates. The system has also been wiped and had Windows and all software clean installed on it again which has not resolved the problem.

More below... may not help, but does say that the programs are not designed to work on a network, and may not
Some? versions of Premiere do not work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-http://helpx.adobe.com/premiere-pro/kb/networks-removable-media-dva.html

Exporting to OMF files from Premiere Pro CS3

How do I export audio files on Premiere Pro CS3 to OMF files?

I dont think you can.
Audio-only formats
• AIFF-C for 5.1 channel mapping (Mac OS only)
• Dolby© Digital/AC3 (requires Minnetonka SurCode)
• MPG
• PCM
• RealMedia
• Windows Media Audio (WMA) (Windows only)
• Windows Waveform (WAV) (Windows only)

Audio Playback Issue Premiere Pro CS6 with AJA IO Express

I am running Premiere Pro CS6 on PC Windows7 64Bit with AJA Io Express. The video is playing back fine no issues there but the audio is struggling to playback. Sometimes it plays back fine but 90% of the time doesn't.
When I play it back it sounds as if I am moving forward frame by frame! Very strange.
I have already installed the latest drives for AJA Io Express.
Premiere Pro Version 6.0.3
AJA Io Express version 10.3.0
Anyone has been expereince the same issues please let me know or anyone that know what's happening or any kind of suggestions again let me know pls
thanks

Since it worked with CS5.5, check with Blackmagic to see if they have updates for CS6
I know from other discussions that an nVidia driver update was needed for at least some people upgrading to CS6

Strange audio problem in Premiere Pro CS6

Hi
I have encountered a very strange problem. I am editing a documentary film in Premiere Pro. All material has been shot on the Sony FS 100 camera - imported into PP with the Media Browser. In one interview the last part of a clip has corrupted audio. At one point on the timeline the audio stops playing, and it sounds like a scratch on a vinyl record - two words repeating themselves to the end of the clip (See screenshot of timeline). The images are as they should. When I open the Avchd source clip in VLC the audio is working. When i Import the clip into Final Cut 7 using Log and Transfer the audio is working. My only other option would be that there is a software problem with Premiere Pro CS6. Any ideas of how to fix this issue?
Version PP: 6.0.1
Source footage: MPEG-4 AVCHD (1080/25p - Sony FS100)
Version mac: OS x 10.8
Model Name:     Mac Pro Mid 2010
Processor Name:     Quad-Core Intel Xeon
Processor Speed:     2.4 GHz
Number Of Processors:     2
Total Number Of Cores:     8
Memory: 20 GB
Graphics Card: NVIDIA GeForce 570 GTX
Third-party I/O: Matrox MXO2 with Max
Mercury Playback Engine: Software mode

One similar, potential problem, that can develop, is when the Conforming process is interrupted, before it completes 100%.
A quick way to rule that out, would be to navigate to the Media Cache files, and Delete the CFA and PEK (Waveform Display) for that Clip, outside of Premiere Pro. Then, when you launch PrPro and Open your Project, the program will recreate both of those files. There is a little progress bar, that many do not notice. Let it complete 100%, before even touching the computer. Test.
I hope that it is as simple as that.
Good luck,
Hunt

No Audio File in Premiere Pro CS6

I have a Sony NX30. I use the sony media importer to get the files on my computer and then use the files in Premiere Pro CS6. Everything works fine.
I have a new desktop computer. Same windows OS. I installed the exact same sony media importer and the exact same Premiere Pro CS6. But on the new computer, when I import a video (using the sony media importer) there is no sound in Premiere Pro. Not even an audio file. Just the video file.
Here is what I learned while trouble shooting:
I can play the video files using the windows media player and I can hear the sound. The sound is there.
I tested some older video files previously imported on my old computer and they worked just fine on the new computer. I could hear the sound and there was a sound file in Pr.
The files I originally tried to import onto the new computer (that had no sound in Pr CS6) I imported on the old computer and they played just fine in Pr.
The newly imported files on the old computer will not play sound when I try them on the new computer (I put the files on an external hard drive and move them on the new computer.)
FYI: the sony media importer has no settings, you just click import amd it works.There are no options to change anything.
Anybody have a clue what could be the problem?
Thanks,
Steve

Adding to what Jim said...
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
-http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

Deleting Plural Eyes extension from Premiere Pro CS6

Hello,
Months ago I was running a trial version of Plural Eyes Software and through Adobe Extension Manager, I installed it into my Premiere Pro CS6. Well, that trial is now over and I want to get rid of the option of using it in my PrP CS6 but I don't know how to do that. I tried to do that through Adobe Extension Manager but remove extension is greyed out.

Hi Maurice,
Extension Manager didn't find your "Plural Eyes" extension( the extension list in the right panel is empty ), so you cannot remove it. Did you install this extension by Extension Manager? Was there any warning/error dialog popped up? After this extnesion was installed, did you remove some files( like .zxp, .mxi ) from your file system? When the extension was installed, did you launch Extension Manager to check if it was showed in the extension list in the right panel?
Anyway, you can install this extension again, and check if it can be listed in Extension Manager. If yes, then you can remove it from Extension Manager. If no, let us know. Thanks.
Xiaoyi

Migrate from Premiere Pro CS6 to Premiere Pro CC Installation

I am a Creative Cloud subscriber. When I initially downloaded Adobe Premiere Pro, I downloaded CS6. I know nothing about the program as I am a Final Cut Pro X user but I installed it so that I can start learning the software but have only just gotten around to finding the time to start learning it. However, I would like to install the CC version but want to know the best steps to take in order to do this? I downloaded the CCCleaner tool to resolve a different issue but can I use to uninstall Premiere Pro CS6 and then just download the CC version or do I need to do something else? I had not really started using the program so I don't have any preferences or anything that I need to retain. Thanks.

Do NOT uninstall Premiere Pro CS6 until you read all of these links!
CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
-also http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5

Exporting multiple audio channels from Premiere Pro CS6 in MXF OP1a

Similar Messages

Maybe you are looking for