Exporting Multiple Projects at a Time

Hi!
Can you please help me on how to export
(called back-up in P3)multiple projects at a time?<br
/>I tried to look for other alternative but I failed. I
can only export one project at a time only.<br
/>
Did anybody can share this to me?<br
/>
thanks.

HI...
YOU NEED TO OPEN ALL
AVAILABLE PROJECTS THAT YOU WANT TO BE EXPORTED AS
BACKUP. THEN PERFORM EXPORT AND SELECT ALL PROJECTS
WHEN PROMTED WHICH PROJECTS YOU WANT TO EXPORT.<br
/>
HOPE THAT THIS WILL HELP

Similar Messages

Aperture cannot export multiple projects for original files

i want to export projects (original files) to time capsule folder for sharing
i can only go into the individual projects, select all, then export to my desire location
but i cannot select multiple projects and do it at once, as i have 100+ projects
it will be a nightmare if i go projects by projects

Tks for the reply , the reason I wrote (original) means I want each project name will be a directory name
That is what the Export settings in my screenshot should give you, if you select the images from several projects at once and export using "File > Export > Originals".
Only you have to select the images inside the projects, not the projects in "Projects" view. Move the projects to a containing folder and select all images in the folder, or select all photos in the "Photos" view.

Exporting multiple projects from FCP timeline hangs

When rendering multiple projects from Final Cut Pro's timeline through compressor, I get varied results. I am rendering 3 files - Apple Pro Res, MPEG-2 (VBR Highest quality for Blu-Ray), & 48khz AIFF audio file.
Typically we will set up 3 projects for one night to render overnight (30 minutes to 1 hour for each project). In the morning when we come in compressor will sometimes show up as 90 hours remaining, sometimes it will still be cranking out on the last project with 12 hours remaining. If we leave it going it will eventually finish. However when we shut everything down, reboot computer, start export from timeline and it completes the render in HALF the time compressor stated remaining before we closed it. Each project typically takes 6-8 hours to get all three files (pro res, MPEG-2, AIFF) we allow 18 hours for render.
Drive space should not be an issue. We have a 5 TB array (typically has 2 TB free for 4 projects), system drive has 350 GB free and the 4 projects rendered out will take up approximately 300 GB. The project reads, and writes to the array for everything.
Any help on trying to figure out why compressor slows down over time. Once restarting compressor goes as expected.
Thanks for the help in advance.
Don
All software is up to date latest versions of FCP and Compressor.

This is like an EDL...Edit Decision List. This basically is a metadata rich document that is used to transfer clip information between systems. You can export an XML from FCP 7 to FCP 6 so that you can open a sequence, or a project. Export an XML of the sequence and open that up in Excel to have clip name, reel and timecode information for tracking footage.
No media is enclosed in this file.

How can i export multiple sesssion at a time

Hi,
My requirement is to write an equivalent query for the sap standard program RSBDCDAT_NEW which will export a particualr session information into a flat file. I have to modify this program to export multiple bdc sessions at a time in one go. the session names will be given as an input from a flat file present in application server.
An any body give me any idea regarding this requirement.
thanx in advance.
Regards,
Maqsood

You can't from the phone.
If they are iCloud contacts you can sign into iCloud.com with Your Apple ID from a web browser on your computer. Click Contacts, select the contacts you want to delete, click the gear icon on the bottom left then delete.

Exporting multiple clips at one time

Hi, My school has asked me to convert old videos onto DVD media for archiving and for distribution amongst all teachers in my department. Yes I am sure some will mention legal stuff here but the videos are no long made and what we have is being held together with cellophane tape or cracking laserdisc videos (remember those?).
So far I have been able to import all the videos into iMovie. Each clip is about 1 minute or less in duration. I am now exporting one clip at a time into the requested WMV format but I can only export 1 clip at a time and I have several hundred to to. Is there a way to select multiple clips and export them one at a time without me having to select and export on clip at a time?
thanks in advance now back to exporting....

Never mind I am doing it one clip at a time. The school seems really happy about this since these video discs are no longer available for repurchase. Thanks.

Export multiple resolutions/formats/versions in single export preset

I would like to be able export multiple resolutions of a project at the same time into separate folders. I can kind of do this now by having multiple export presets and running each of them right after the other and then letting them export simultaneously. Even though the export preset has a folder name specified, I have to manually type in the unique project name into each export preset. Unfortunately this becomes a little bit cumbersome as I often use 3 or 4 export presets for each project, and I may be exporting multiple projects at the same time. Obviously it makes sense to just type the unique text once (or have it automatically read from metadata) to avoid typos and make it easier on me.
I think there are two parts to make this work. The first is using metadata to name the folder name (to ensure unique foldernames), and the second is to allow "export preset groups" that export multiple presets together.
Here is my scenario:
I have three export presets:
600px saves to subfolder "project 600px for web"
2400px saves to subfolder "project 2400px for print"
600px watermark saves to subfolder "project 600px watermark"
So I have to type the real project name, replacing "project" three times for each project. This information could be easily entered automatically because lightroom already has that metadata in the folder name, or collection name.
This could be entered for the folder name in the same way custom file naming is done with the Filename Template Editor.
Another option would be use the Custom Text field in the Filename Template Editor to manually enter the project name if it's not already in some metadata field.
All of this already works great with the file name options, it just needs to be applied to the folder name as well.
Once the folder naming is taken care of, just group multiple presets into a preset group, or allow to select multiple presets at once, and exporting multiple resolutions/formats/versions of a group of images is made easy.

Thanks Rob
Your export plugin does allow running multiple export presets in a single group, however it still doesn't address the folder naming issue. Using your tool, I can easily initiate my multiple presets in a single export, however I am stuck using the generic foldername that I specified in my original export preset. This means that after the export completes, I still have to rename the folders to the particular project name. I would save the time of typing the project name into lightroom, but then just have to repeat that same task later outside of lightroom. It also prevents me from exporting two projects at the same time (or one after the other) because both projects would end up in the same generically named folders.
That said it is a useful plugin that I will likely use under the specific scenarios where it does work.

Exporting several projects at once

Is there a way to export multiple projects at once, or to create an export list such that it'll automatically export every project on that list sequencially?

I just Send To Compressor for those.
Or, export them all as QT files (Cmd+E) then use Compressor on those all at once.

Export multiple folders while keeping folder structure

I want to export multiple folders at one time. I select the folders in LR and then all the photos in those folders. When I look at the exported photos they're all lumped together (and the keywords are gone, if I do one folder at a time the keywords remain)
Any way to keep the folder structure while exporting multiple folders?
Thanks

You can use a publish service such as this one: Jeffrey Friedl's Blog » Jeffrey’s “Folder Publisher” Lightroom Plugin

How to update project number for multiple projects in 1 go?

Hello Experts,
I wanted to update the project number for 100 odd projects? is it possible ? what is impact ? How would I do it in one go?
Please help
Thanks
:-)

Hi Siddhartha,
After some research i found a way, just put more references on the "collection".
Here's a sample to export all domain projects :
collectionList = ArrayList()
refs = ALSBConfigurationMBean.getRefs(Ref.DOMAIN)
it = refs.iterator()
while it.hasNext():
ref = it.next()
if ref.getTypeId() == Ref.PROJECT_REF:
collectionList.add(ref)
collection = HashSet(collectionList)
To export multiple project, just put multiple projects refs in an arraylist and create a Set from the arraylist with "collection = HashSet(collectionList)".
Regards,
Adrien

Is multiple project export possible ?

it would be nice to be able to set multiple projects up for Media Browser Export !
perhaps an apple script or an automator script .
i have a couple projects ready to render in Large and Medium size !
but its time consuming and it is a waist of time to do them at one time.. i set one up it takes about an hour.
i would love to be able to set up let say 4 projects to export in medium and large size overnight so when i get up i have them all ready for iDVD instead i have to spend more time during a day to export them one at the time ( i'm not in front of my computer all the time )
anybody has some hints or could build a nice Automator for it ?

Hi f
Just as Karsten writes.
a. You need an external hard disk:
• HAS TO BE - formatted as Mac OS Extended - NOT AS - UNIX/DOS/FAT32/Mac OS Exchange
• Should be a FireWire one - USB/USB2 performs badly
b. You keep Your program on Your internal (start-up) hard disk and store Your
movie project (icon with a Star on it) on the external one.
c. less than 10Gb free space on the internal (start-up) hard disk often gives
problems of many kinds. I try to free up 25Gb to be able to work confortably.
Yours Bengt W

How do i export multiple full resolution movie files at the same time in final cut pro 6?

I've been using Final Cut Pro since version 3 came out, know the program well, have even had jobs consisting of just operating the program. I'm currently running version 6 because that's the latest one that works on my computer. Back in verison 3, there used to be an option under Export to export a "Final Cut Pro" movie, which was really a Quicktime movie but appeared with a FCP icon and defaulted to opening in FCP, but the important thing about it is that it was a full resolution copy of the movie with no compression. Now, that option seems to have been changed to "export Quicktime movie." In my opinion that change is kind of stupid since it is so much less specific and is even less of an implication that one is exporting a full resolution file. But in fact you are.
One also has the option of using Compressor to export a version of a movie, and therein there are so many different options that if you are not confused by it I think there's something wrong with you. Moreover, it would appear that there is no equivalent of exporting a full resolution version of a file in Compressor. Fair enough: a full-resolution file involves no compression so is not appropriate for "Compressor." BUT, suppose you want to export multiple uncompressed, full-resolution movies at once. When you use Compressor, you are able to create batch lists and export many things at the same time, for instance, lists that will take many hours to complete so you can go to bed and get the results the next day. But as far as I can tell there is no way to do this at full resolution without compression. Instead you have to sit at the computer waiting for each one to finish and after each one, manually go to the next and select "export Quicktime movie." Even if there is a way to do this I would complain that such an obviously desireable thing is so unaccessable. In fact, the only reason I've typed out my question at such length is because I'm stuck here waiting for each one of my movies to export.
Anyway, all my complaints aside, anyone know how to do this?

what you're missing to export multiple files is the batch export command available in the file menu or by control clicking on the items in the browser. You can export multiple sequences/clips at full resolution with this.
This has been available in fcp for a long long time.
Wow, you are right. Now that you mention it, I can't believe I never noticed that. Thanks.
Only if you have the 'Self-Contained' box checked. Otherwise you'll end up with a reference movie.
Correct. That box is typically checked by default. There are other default settings you could change that would not result in a full-quality version, but what I meant was hitting that option from the pull-down menu, then changing nothing and hitting ok.

Can I export multiple folders at the same time, keeping the album structure

I'm exporting all of my photos from 2010 so far. Is there a way to export multiple folders at the same time, while keeping the existing album structure? It seems that when I try it, iPhoto exports them all to the same folder.
I really don't want to do this one album at a time, and here's why -
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.

Check out [iPhotoToDisk|http://www.iphototodisk.com/index.html]
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.
Why not upload to Walmart from iPhoto? Check out the first option here:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Use of MS Project Management 2010 to Manage Multiple projects over a given time period

Is there some information (article/s) I can research about using MS Project Management 2010 for managing multiple projects over a given time period? I'm being asked by a potential client to take a job as a Program Manager to manage five projects all
at once. Each of the projects has it's own MS Project Management software, project leader, and project team. An overall project plan has to be put together to manage this large project. There are some dependencies with these projects inorder to complete
on a specific date.
Thanks

SSCDML --
In order to manage this program of five projects using Microsoft Project 2010, I would recommend you do the following:
Create a shared resource pool file containing the resources in all five projects.
Connect each of the five projects as sharing files with the shared resource pool file to share the resources.
Create a master project for the program containing each of the five projects as subprojects.
In the master project, set cross-project links as needed to show dependencies between projects.
Hope this helps.
Dale A. Howard [MVP]

Exporting Multiple Images from Library - Resized CP4 to CP5 Project

I am getting corrupt files when attempting to export multiple images at once:
OS: Occurs on both Win 7 and XP
Source: CP4 project imported to CP5. Original CP4 project was captured at 1024x768 and later resized to 1024x738.
1. Open Library Backgrounds folder.
2. Select more than one background image
3. Right-click over selected objects
4. Click Export from the context menu
'Browse for folder' dialog appears.
5. Select a folder
6. Click OK
Files are created in folder, but are corrupt. When exporting the same images individually, they come out fine. Individual image export file size ends up ~ 2MB each. Multiple image export file sizes end up ~60kb. All are exported as .bmp (not given a choice when exporting multi-select).
Multiple file export works fine in a new CP5-native project.
I've reported it as a bug.

What version of Aperture do you have? This is simple with AP3. Fle -> Export -> Project as New Library. At the far end, Import Library....
Regards
TD

Multiple Project Scheduling for the project at a same time

Hi Experts,
Is it possible to schedule multiple projects together at a same time. As my client is having more than 5 customer project running all together and he wants to schedule all the projects together so that there is no dates overlapping for similar activities for multiple project. As the activities are dependent on labour and machine and at one particular time the resource could be devoted either on one activity of the project.
I look forward for your revert
Thanks and Regards
Simon

Hi
One more thing, when i am changing the dates of the activity due to delay from customer end, then where can i see the comparison of old dates and new dates.. though i can see the report in CJ29 but when i change the date in the activity then in the report it shows new date in the new and old date column and does not display the old date in report in the old date column..
Please let me know if i need to do any configuration for that
Regards
Simon

Exporting Multiple Projects at a Time

Similar Messages

Maybe you are looking for