Exporting one clip as multiple clips from timeline?

I've got one piece of media that has half a dozen shots on it.
I cut the shots on the timeline.
Is there a way I can export those 'individual' shots separately from that same sequence, or using batch export maybe?
Or do I have to put each in a separate sequence and then batch export the sequences?
I did simply make the cuts, drag the separate clips to the bin, and try a batch export ... but of course each separate clip, when exported, became the full piece of media (with all six shots) again.
I've got a lot of shots to extricate from large chunks of media, so I can run them as separate shots through Color. I noticed when I 'sent' the separate clips (though still all from the orginal chunk of media) into Color, Color couldn't process them as separate clips, kept getting confused (or it seemed like that was happening).
Any suggestions would be most appreciated,
Ben

Yes! Thank you Shane. For some odd reason I haven't had to make sub-clips for years. I'd forgotten all about that. I created individual sequences, batch exported from the sequences, but was getting odd results, unpredictable. Then I exported each clip singly, right from the original timeline ... and had odd problems. Aha! So I rebooted FCP ... and everything was working again. Bad news, trying to do something unfamiliar and FCP has got itself tied in an inivisible little knot.
Still, the subclips look like the way to go. Coz then I can batch export ... and go do something else more profitable in the meanwhile, like now, like lunch for instance.
Thank you Shane, much appreciated...
Ben

Similar Messages

How do I apply color correction from one clip to multiple clips?

Hey Everyone,
I coming to find out that I'd like to apply the color correction from one clip to multiple without clicking, dragging, and punching in every setting clip by clip. Does anyone know how? This would be a total time saver! Thanks in advance.
Mike Diaz

Grizzly,
You are too awesome! Thank you so much my friend.
Mike Diaz

Trouble exporting To HD with multiple clips

Can I export my iMovie project if I'm mixing videos from my HD camera and my iphone? After going the the hour nog process of exporting twice now, it gives me and Error 49 at the end and won't export the movie. Is the reason because some of my videos are from my iphone?

I assume that your video was converted to AIC for editing in FCE ?
With all FCE projects destined for iDVD the advice is the same.
For videos up to 65 minutes, open iDVD preferences and select "Best Performance". For longer ones up to 2 hours you must choose either "Best Quality" or "Pro Quality", but these take 2 and 4 times longer to encode than "Best Performance".
Then click on your FCE timeline and select File>Export>QuickTime Movie. Do NOT use QuickTime CONVERSION . . . . . . that is mainly for internet videos.
You can deselect the "Make Movie Self-contained checkbox unless you are moving the file to another computer for burning.
That's all, apart from clicking the "Save" button.

Compound Clips - possible to move from timeline to event?

Hi,
I know that I can create compound clips in the timeline or the events browser.
But is it possible to MOVE a compound clip created in the timeline to an event?
This would be very useful for syncing clips in the timeline first and moving them to the events browser later.
Thanks!

Create an empty Compound Clip in the Browser, and then copy and paste the relevant clips from the timeline into that CC (open the CC in the timeline first).
Andy

How export one table along with data from one location to other location

Hi All,
I'm new in export/import practice.
Can anyone plz tell the steps along with commands to do the following:
1. I want to export a table with data from one location(computer) to other(computer) that are in same network.
2.Also from one user to another user.
I'm using oracle 10g.
regards
Sonia
Edited by: 983040 on Feb 19, 2013 11:35 PM

First of all read documentation
Oracle Export/Import : http://docs.oracle.com/cd/B19306_01/server.102/b14215/exp_imp.htm
Datapump Export/Import : http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_overview.htm
If you are using Datapump or Traditional Export/import you need to follow following steps
*1) Take User dump via EXPDP on Computer A .*
For EXP
exp username/password owner=Test file=D:\test.dmp log=D:\test.log
For EXPDP
expdp username/password schemas=TEST directory=TEST_DIR dumpfile=TEST.dmp logfile=TEST.log*2) Copy that to Computer B*
*3) Import dumpfile.*
For IMPDP Use remap_schema optionhttp://www.acehints.com/2012/05/data-pump-impdp-remapschema-parameter.html
For IMP use fromuser and touser option
one user to another user imp

How export one table along with daya from one location to other location

Hi All,
I'm new in export/import practice.
Can anyone plz tell the steps along with commands to do the following:
1. I want to export a table with data from one location(computer) to other(computer) that are in same network.
2.Also from one user to another user.
I'm using oracle 10g.
regards
Sonia

Wrong forum. This is a database query not an Oracle Secure Backup issue.
Thanks
Rich

Export to Quicktime HD 1080i fails from timeline in Premiere Pro CC

I have AVCHD files in my timeline and need to export Quicktime HD 1080i for a client. From the export settings, I choose Quicktime with the preset for HD 1080i and click on OK. The dialog box export with the progression bar just hangs there. Eventually, I force close Premiere Pro and Premiere Pro will not start again until I restart the computer. What gives?

Here is more information: I use Premiere PRo CC 7 and the taped based media in the bins are from a Canon HV30 taped based catured to PP directly in a MPEG format. I have already used some edits from this media as well as my captures from digital, which isnt causing any problems. When I mark the taped based media in the source window and attempt to drag it into the timeline the hand gets a circle and slash line on it and will not let me place it into the timeline. Yet I can still load my digital stuff into the timeline and edit normally. I need some footaghe from the tapes but cannot get it into the timeline from the source monitor even after updating, shutting down and reopening. No avail still when trying to drag the hand with the circle slash still exist not allowing it into the timeline. Previous footage on the timeline works no problem. This started yesterday.

Is it possible to export part of the FCPX Project from timeline

Is it possible to export a selection from the FCPX timeline or do I have to export the entire project and then edit it in another program.

andynick wrote:
Goldfish wrote:
FCP7 was much better for this:
Yes - but you don't mention the billion ways in which FCP X makes FCP 7 totally obsolete.
Andy
I didn't think it was relevant to the thread.
I'm simply encouraging the return of a few features that were left on the cutting room floor - no harm in that.
I O markers and chapter markers are a few of them and routinely a topic of discussion. It's not just me.
For the record I'm a big Fan of FCPX. It has many of the features that I said, for years, should be added to FCP7 - and I took a lot of heat over the years for pointing out the deficiencies in FCP7.
When a new editor comes to the forum and asks "why can't i do this really simple thing" , I think it's better to acknowledge his observation and encourage constructive feedback to Apple rather than implying that he was stupid for knot figuring out a convoluted work-around for something that should exist in the program.
If your post had started with "here's a work around…." rather than " takes seconds…"
and you had finished with "…hopefully we'll see I O markers in a future update…"
Rather than "…Ctrl+Zs to get back to previous state." you never would have heard a peep from me.
I just find the apologist mentality difficult to ignore. No offense intended.
best regards,
g
PS - I also think "totally obsolete" is a bit of a stretch.

How do I export one page to a PDF from a multipage spreadsheet?

I have a multi page spreadsheet ported over from an Excel workbook. I use this for billing and just add a page at the end for a new invoice. I need to make a PDF of the current invoice to send to my customer. I've tried all permutations of the export command and the result is the same all 24 pages or sheets are converted and I have to open the PDF with another piece of software to delete the unwanted pages. Any ideas on how to simplify this process?

In the print dialog select the "From ... To..." option
Then select the PDF button at the bottom left corner to export a pdf directly to email

Automated way to overlay one image over multiple images from a folder?

I need to overlay a transparent image of a tablet over about 50 images from a folder - is there any automated way to do this? I can use either Photoshop or Illustrator
Thanks
Jamie

Have you tried makig an aciton yet. Should not be too difficult since you want to to use the same image , you can copy once, and use paste during the action.
Make sure when you run the action as a batch, that you choose your destination. As a folder is safest, so you do not write over your original file.

How do I export a folder containing multiple photos from iPhoto? I can't get it to export anywhere- no matter what I try!

I'm having trouble exporting a folder containing many folders out of iPhoto. How do you do it?
I just get error messages...

Re-sync your device to iTunes and uncheck Sync under Photos.

How to apply Time Remap to multiple clips simultaneously

Quite often after trimming many different clips for a wedding video I will then want the majority of them slowed down to a 50% speed. I know how to apply the Time Remap Speed % change in the Motion Tab, but have yet to figure out how to make the change to multiple clips simultaneously.
Thanks for your help!

You can apply a speed change from one clip to multiple clips by copying the first one, then pasting attributes (option + V, then select speed from the list) onto as many clips as you have selected.
Just be aware that this will ripple your timeline by extending all of your clips. FCP keeps the original out point of the source clip, not the out point of each cut on the T/L.
Tim

Export a only a Movie Clip

I am building an interactive website as my final project for my Webmastering class and need to know one thing. First I'll give you my setup. I have four Movie Clips in four seperate layers on my main timeline. I want to export one of those Movie Clips as an avi file. When I use export>movie, it exports the main timeline. I figured it would do that. So then I opened up the Movie Clip that I want to export and tried the same thing again. No luck. Anyone have any ideas on how to remedy this situation. I have five days to do this and have spent about four days of my life working on this if you add up all the hours that I have spent working on this. I really really need help. I don't want it all crashing down on me because I can't simply export a movie clip...
Thanks in advance,
Darth Haxor

Create a new blank document with the same parameters - size, fps, etc. - as the one the movie clip you want to export is on. Have both documents open at the same time. Select the new document by clicking on its tab, and then open the library window.
On top of the library window is a drop down list of all libraries that belong to currently open documents. Go there and select the library of the original document. From that library grab and drag the movie clip you want to export onto the stage of the new document you created. Position it where it belongs. Now you can export this new document, containing only the one movie clip you want to export.

Can't add more than one title over single clip

This is the first time I'm using a clip that is unedited apart from a title card over black at the beginning that dissolves into the clip and a dissolve to a still photo at the end of the clip. So far I have only been able to add three titles: the first over black, the second over the actual clip, and the third over the still photo.
The clip lasts around a minute so I want to add titles as it progresses. For example, the first title can last for 5 seconds, then a gap of 10 secs. and then another title for 5 seconds, etc. Every time I try to drag the title
Every time I try to drag a title into the project, it doesn't "take." Does iMovie not allow a string of titles if there are no edits within the actual clip?
Thanx.

This applies to iMovie 08:
1) It appears that when you drag a photo or a title to a long clip, then by default, it thinks you want a long photo (or title). It seems like it wants to make the photo 25% or more of the length of the clip. This is why it is hard to drag multiple photos to a clip. The last photo you drag is trying to take up 25% plus of the clip, and there may not be room.
I found a good workaround. I added a dummy clip that was 4 seconds long to the end of the project. (This clip to be deleted before sharing the project). When I drag a new photo to the project, I first drag it to the dummy clip. Now the photo has a duration of exactly four seconds, and I can drag it to the place I really want it. It fits now, because it is only four seconds.
2) I confirmed that when you put over 4-5 photos into a single clip, they will start behaving erratically. One will not show up, and another will show up twice.
The solution is to split the long clip into multiple clips. I had a long clip. I split the long clip into 30 second chunks. To do this, I imported the entire clip several times. Then, in the first instance I selected from frames 00:00 to 30:00. In the second clip I selected frames 30:01 to 1:00:00. Then 1:00:01 to 1:30:00. etc. This way, I did not lose any footage, but I had multiple virtual clips, where before there was only one. Now I was able to add multiple photos to each of these shorter clips with no trouble. And I only needed four photos per clip. It worked great.

How do you apply an EQ filter to multiple clips at once?

i need to EQ a VO and rather than apply the filter to each clip serparately, is there a way to apply one filter to multiple clips at once?
thanks
carl

apply your eq effect to one of the clips and adjust settings as required, then select every other clip that you want to apply this eq to, and then drag and drop the effect (from the viewer) onto one of those selected clips ... it will apply to all those selected.
another way, if its the only effect on the clip, would be to apply and adjust the effect, select the clip with the applied effect and press cmd-c to copy, then select all the other clips you want to add the eq to and press opt-v to paste attributes ... in the window select audio filters (only)

Exporting one clip as multiple clips from timeline?

Similar Messages

Maybe you are looking for