Exporting only part of the Sequence

I do not have any in and out points on my sequence, but when I export, only part of the sequence exports. I have chosen numerous encoding presets, tried placing in and out points at the beginning and end, but it still does not work.

I've tried exporting through DV NTSC and DVCPRO720p60.
Say if I had a 10 minute sequence, then it'd only export 3/4th of it.

Similar Messages

IMovie '08 exports only part of the project

I use iMovie '08 (7.1.4) and I want to export a 28 min. project to .avi.
After the export, without producing an error message, it turns only the first 4 minutes or so have been exported. The quality of those 4 minutes is fine, but I have no clue why it does not export the rest:
- I can't find anything wrong with the project or the files in it; the last frame of the (failed) export is in the middle of a fragment.
- I have about 28 GB of free space on my HD so that shouldn't be a problem (I even tried exporting to my external HD with 600 Gb free space, same problem)
- I export via QuickTime and use the same settings I always have and which worked fine until now.
Anyone got any clue what the problem could be?

In my case, the culprit was backups and disk-related software eating large amounts of CPU.
I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
Now GB runs fine, even with multiple tracks unlocked.
Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
~2010-vintage iMac, 8GB RAM, GB '11

How to export only part of animation?

In the case of a big animation (tens of thousands of frames), is there a way to render (using Export Movie) only part of the animation, e.g. frames 100-500 and nothing more? That way, loss of time would be reduced.

Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
Thanks
Steve

How to send only part of a sequence to Encore?

Hi
I'm new to CS5.5 and I've been trying to figure out how to send only part of a sequence to Encore from PPro. I see in the Help file that it says this can be done but it doesn't explain how to do this (or I haven't been able to find where it's explained). When I use "send to Encore" with dynamic link it sends the whole sequence even though I've tried marking in/out or marking the section I want with the work area bar. Is it not possible to do this using dynamic link?
Thanks!
Steve

Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
Thanks
Steve

How do I export only part of a pdf?

how do I export only part of a pdf?

Hi eannablack,
The only way to export part of a PDF is to remove the pages that you want to export. And to do that, you need Acrobat. You are welcome to try Acrobat for free for 30 days. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara

Exporting a part of a sequence to Quicktime movie!

Is there a way to export a part of a sequence to quicktime movie in FCP?
I come from Premiere world. In premiere there is a work area bar in the timeline; During AVI export it can be set to export clips within work area. That kind of ability seems to be missing in FCP. When I try to export, its exporting entire sequence. Is there a way to limit export area within a sequence?
Thanks for your help.

Thanks henners, I just figured that out myself. Thanks for your help anyways.
Another question, Is there a set-up that I can make so that the clips that are exported to quicktime movie, automatically imported into the project. I know I can manually import the clip. Again, Premiere had the ability to do this. I looked through the preference set-up, didn't find anything.
Thanks.

Display only part of the STRING field, but search ALL field

Hi all,
I have a field VARCHAR2(4000) that holds a lot of text.
When I make a report in APEX, it shows in each row, ALL text, so the report is very "ugly".
I want to limit the display of that column for only the first 60 characters.
I tried to use the SUBSTR function, that worked, but the search option will search for the text only in that 60 lenght characters, and will now search in the rest (not displayed) part of the field.
Is there a way to do this full search and display only part of the field?
Thanks

You can have the 'substring' column displayed to the user, but have another column which shows the full text lets say it has an ALIAS of "*SEARCH_LARGE_TEXT*" in the report definition(and is among the displayed columns).
You can hide the large text column(SEARCH_LARGE_TEXT) using JS as
$('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
Note: ^= syntax used to match data column even when break formatting used
You can make sure that the column stays hidden even after an IR filter or refresh by binding it to the refresh event of the IR by
$('#apexir_WORKSHEET_REGION').bind('apexafterrefresh', function(){
$('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
change the string "SEARCH_LARGE_TEXT" with your column's alias
Hope it helps

Syncing only part of the playlists

Hi,
Is it possible to sync only part of the playlists? It seems that if I remove some of the songs from my hard drives, iTunes removes the files from my iPod as well. For example, in my iPod I have a playlist called ABC that contains a song DEF and GHI. If my hard drive no longer has these songs and the playlist's removed in PLAYLISTS, playlist ABC and the songs in my iPod will be deleted after I do a sync. How do I keep the songs in my iPod when they're no longer in my hard drive?
Thanks,
Sun

If I select just one of the many playlists I want to update, it seems to update just that playlist and remove everything else.
iTunes won't remove anything from the iPod if you are Manually managing your music.
To remove songs from the iPod, YOU have to select the songs and delete them yourself.
Just like if you want any songs on the iPod, YOU have to select them and drag them to the iPod.
So it doesn't do incremental synchronizing?
If you are manually managing your music on the iPod, it doesn't do ANY syncing.

Thunderbolt connection to projector doesnt work: only part of the screen is projected. Solution??

When I hook up my air to a LCD screen only part of the image on the air is projected. Solution anyone?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

How do I export only a part of the sequence? (storyline)

In FCP 7 it was simple to export only a portion of the sequence. How in the world do I do that in X?
Later.
Tom

If you have Compressor 4 then I think you can still export just a selected range of your timeline ... if not, or if you don't have Compresor 4 then you should be able to quickly convert a selected range to a Compound Clip, then right click that and Open in Timeline, then export that timeline (ie the original selection) ... then just step back into the main timline and Undo to get back to the pre-Compound Clip state if necessary.

Exporting only part of an iTunes library

My disk is full. I need to get my iTunes library off of it. Can I only export part of the library, say just the videos or music files, or do I have to export the whole thing?
Is it possible to export it to a network disk so that it will play over the wifi network?
Thanks,
Ira

For anyone who has this problem in the future - I have a solution!
I used iTunes to burn the playlist to two DVDs... then I imported the songs over on my MacBook.
It took about an hour to do all the burning/importing... but now I have all the songs that I want. =)

Import part of the sequence from another project

I'm working on about the fifth edit of a project and now want to move part of a sequence (about 40 clips) from one project to another. I understand I could import the entire sequence and then delete all but the portion I want, or delete all but the portion I want and then import it as the entire sequence - but this might take a while. Anyone know of a quicker way to import a portion of a sequence from one project to another. Many thanks

Thanks guys,
Would have reported back earlier but have been on other adventures. FYI, never get involved in filming medieval stuff, they're insane. But back to the project in topic, unfortunately the lasso / copy from one project to another certainly did not work in this instance. However thanks to Craig Howard @ # 1. This is probably the only method that will work in this example and even so I'll report on it's outcome later.
Thanks guys!

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page word document, some recipients get only one page. Also sometimes when I burn an image from iPhoto on to a disc, only part of the image appears. Why?

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

With 2 devices, how do I sync only part of the library on one device? That is, sync only music and not the podcasts.

Trying to sync part of a library on one device and all of the library on another. Not finding any options to select only parts of a library to be sync'ed. Any help appreciated.

In ipod menu in iTunes, tick the "manually manage music and videos" then select the items that you want to sync. Cheers!

How to copy only part of the music media folder and library to another Mac

Dear friends,
I run iTunes in Mac OS. The iTunes music media folder is now located in an external HD because it´s quite large (2T). The problem is that I´got a second Mac and I´d like to copy -in this second Mac, only part of my music using only its internal HD (300 Mb) . How can I do this copy while preserving art and play-lists?
Thanks in advance

tcynk00 wrote:
how I can transfer only selected pieces of music (all library will not fit anyway)
that's what playlists are for.
and how to maintain transfer process in future when I want to change the music on my nano.
add/delete track to/from the playlist you sync to your device.
JGG

Exporting only part of the Sequence

Similar Messages

Maybe you are looking for