Exporting Options in Final Cut Pro

At work I can Export a sequence out of final cut pro as a motion jpeg A or use sorensen 3.
At home I have The same version of FCP but do not have those options.
I'm Talking Final Cut Pro 6.
I can export motion jpeg through Quicktime Pro.
Any Thoughts?

In the QuickTime preferences pane in the System preferences, there should be an option for SHOW LEGACY CODECS. These are legacy codecs I believe

Similar Messages

Flash Video Exporter plugin for FInal Cut Pro

Does anybody know how to install the Flash Video Exporter
plugin for Final Cut Pro so it shows up as an option in FCP?
I want to create FLVs directly from FCP.
Thanks

http://www.adobe.com/devnet/flash/articles/flv_exporter_03.htm
Scroll Down - its about mid page
This is on the intro page:
Note: You must have Flash MX Professional 2004 installed on
your machine to use the Flash Video Exporter with your video
editing application. The only exception is using the exporter in
Demo Mode.

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

Can't Export Video from Final Cut Pro

After updated to OS Maverick, I can no longer export video from Final Cut Pro.
It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
ANYONE CAN HELP??

10.0.2, I think this is where the problem is.
I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

Command to Export project as Final Cut Pro XML from jsx script

Hi All,
Can somebody get me the command to export the project as final cut pro xml from jsx script.
I was using the extension builder script earlier for cs6 panel development, so we were using pjct.exportFinalCutProXML("pathname");
Now I am working for panel in Premiere CC so working on HTML 5 panel and qe dom scripting(.jsx).
In some jsx examples i got there is script to export sequence as final cut pro xml but cannot get the code for project export.
project.activeSequence.exportAsFinalCutProXML(entire_out_path);
Also please let me know if there are any kind of reference available about all the functions and properties in the pe dom scripting for premiere pro cc.
I am using premiere pro cc 7.1, windows 7, Eclipse Kepler.
Thanks in advance,
Anoop NR

When you reimport the exported project XML to FCP, do you get the full project or just the single bin/sequence? If you get the full project then it sounds like you need Premiere help, not FCP help ... have you tried asking on the Adobe forums? If you only get the single bin/sequence then it seems you might have inadvertently selected those prior to creating the project export. Try making sure that your FCP Browser window is active and that you have not selected anything within that window prior to using the File > Export > XML command. If that still causes issue then you might try using an earlier FCP XML version.
Hope it helps
Andy

OMF won't export out of final cut pro.

Exporting a 93min 1920x1080 HD timeline to OMF
5 second handles tried 2 second handles as well.
OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
Final cut 6.0.6
Have deadline. Didn't see it on any forum. Help!! Thanks!!

Seems like a weird thing to not be able to do since it's called final cut PRO...
Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
Shane

Export project from final cut pro to Avid

What are my options to create a workflow that implies doing my last trims on Avid (Adrenaline and Nitris?)
My idea is to create almost ended videos on Final cut Pro 5 by myself and expend a last day or two on an Avid Nitris to do the final touches, mixing audio and output the stuff...
the videos are industrial video and small budget commercials that requires more effects that Final Cut can offer me...
THANKS IN ADVANCE

First off, you'll need PRO EXPORT FCP>AVID from www.automaticduck.com.
Then you'll need to recapture all the footage used in the sequence into the Avid, since FCP and Avid capture media differently.
Shane

How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

Hi
I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
Here are the settings:
HD:
1 Video CODEC                 XDCAMHD50
2 Wrapper format           QuickTime Self-Contained
3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
4 GOP                                   Long GOP
                                             Closed GOP
5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
6 Movie version               UK Home Video Version
7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                          1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
2 Resolution                      1280 x 720
                                           1920 x 1080
3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
5 Chroma format              4:2:2
1 HD audio format           24 bits/sample 48 kHz sampling rate
2 Track layout                    Track 1 – 2.0 Stereo L mono
                                            Track 2 – 2.0 Stereo R mono
                                            Track 3 – L
                                            Track 4 – R
                                            Track 5 – C
                                            Track 6 - Low frequency effects LFE
                                            Track 7 – L Surround
                                            Track 8 – R Surround

First of all, what are your sequence settings? Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this). Do you have a surround sound mix?
You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs.
Do you understand about safe zones for graphics? If not, post back.
I don't see any option to set the GOP in xdcam in compressor. This may be built in to the xdcam format.
I don't see any option for 720 xdcam hd in compressor.
There are many other tools available for this kind of work, but they may be out of your price range. You might want to just find a facility with experience in deliverying this sort of thing.

No share option on final cut pro x

Hey everyone, very desperate here:
I have NO SHARE option on the top left side of my screen while using Final cut pro x!!! I've watched tutorials on "how to export from FCPX" but I can't even click that field because I DON'T HAVE IT...
I found a share option under File>Share then I want to export it to DVD but nothing happens when I click that option (and of course there's a raw DVD in the computer..)!!!
Please help me! How do I export my film / get the share option on my FCPX???

Visual Glitches in 720p HD Exported Footage on Final Cut Pro

Hi...
I'm working with Final Cut Pro, on a brand new Mac Book Pro. My footage has come from a Kodak Zi8 video Camera. It was shot at 720p, and the format is MOV.
I've cut up all my footage into a nice little video diary, with simple cross dissolves, and a few text overlays. Nothing fancy. But when I export it, my final file has a ton of visual glitches throughout the length of the video. A lot of the transitions it freezes on and then comes in after.
I'm exported as a self-contained MOV file. I've never had this problem with SD footage. Am I doing something wrong? Help please.

ok... How would i go about converting the footage, considering that the footage comes off the camera in it's raw state in that format. What program should I use... and what difference would it make.
My editing process ran smoothly... it was when I exported the file that I noticed the glitches.
I always export as a high quality quicktime format. Until I clicked the "recompress all frames" option, it wasn't rendering the transitions and text overlays correctly.
The final result looks great now... for a cheap "HD" non 3 CCD camera. See it here: http://www.youtube.com/watch?v=H4rNajjeURM
I have a Panansonic HVX, with a P2 card that I could shoot and edit at 1080i, but for simple video diaries, I need a quick solution for editing this footage. And imovie doesn't give me the versatility that FCP does.

16:9 Export trick from Final Cut Pro to iDVD

If this is posted, I have not seen it. I have spent years trying to get a decent photo quality video on my widescreen tv without peoples faces looking like 4 pixel blocks. I think I have found a pretty decent result.
This is for Photo Slide shows only. (If you are going to mix widescreen video with photos, you must have the video in the timeline before you change the sequence to Anamorphic.)
Create my widescreen project in Final Cut Pro
(Photos have already been custom cropped (16x9) and reduced to 960 px in height before importing. iPhoto does this easily)
Sequence settings in FCP: Use the default settings just check anamorphic. Also, best compressor for photos seems to be DVCPRO.
When project is ready to export, Export to Quicktime Movie
Setting: Custom (the Sequence Editor pops up)
In the Aspect Ratio drop menu select "HDTV 720p (16:9) This will change the aspect ratio to 1280x720. All other settings should match your sequence settings.
Export
Open the movie in QT Pro. Select the Video Track in the Movie Properties
Check Preserve Aspect Ratio
Change the Height to 480 (the width should automatically change to 853)
Close the movie and save changes.
(This step really does make photos clearer)
iDVD will read this as widescreen and create descent non pixelated SD quality on your Widescreen TV.
If you have a better way to do this, or can get better quality than this achieves, I would be interested to know.
Profe

Hey Mish.
I use 960 px because it is double the minimum 480. That allows me to use zoom animation or crop further without losing quality. I guess I would not have to go as high as 960 but its a number easy to remember.
As for your questions about my methods. I am one of those Final Cut Users that really does not understand how things work. I am just good at using it to create my movies. So what you say is Greek to me. Also, for some reason, I do not have Compressor application that so many people talk about in the forums. I just got so fed up with the crappy result I got with just exporting with the same settings as the sequence. The result was pitiful. If you think of a better result using different sequence or export settings, I'll try it.
I do a Highlights DVD project once a year. It's about 2 hours long (photos and video) and this method has given me the best ever result. It's my last year doing it so I don't want to invest in any software. My buddy would also tell me to use DVDSP and I've used it a couple of times but there is so much to it that I always forget what to do. So I have to "play nice" with iDVD
Profe

Export jpgs from final cut pro x

How do I now export jpgs from my final cut pro x?
They seemed to have changed it in the new version.

From the Share popup select Add Destinations. You see it in the Destinations preferences.

Export markers from Final Cut Pro X to DVD Studio Pro

Hello,
After finding out how to create chapters via markers in Final Cut Pro we wonder how to export these markers to DVD Studio Pro without having to create ourselves a .txt file and writing the names and the times of the markers in it to export it to DVD Studio Pro. Isn't there a way to make this happen automatically?
Unfortunately the new version of Final Cut Pro doesn't have an export to Quick Time Player and this is why this kind of solution falls out and we really need to create the markers first in Final Cut Pro and not directly in DVD Studio.
Is there a solution?
Thank you.

At present, you cannot add chapter markers in FCP X.
If you send the project to Compressor, you can add chapter markers there, or you can add them in DVD SP.
You can add the chapter markers in Compressor or DVD SP manually, or if you create a text file listing the exact timecode positions (from FCP X storyline) where you want the chapter markers to be (each on a new line) Compressor (or DVD SP) will automatically insert the markers when you point it to the text file.
Andy

I can't export video from final cut pro trial

I'm currently using final cut pro trial.
i have finished a project, and tried to export the video.
There's not "share" on tool bar, but there' one under "file" toolbar.
To share, i have to add destination, but I can't add any destination

The Share button is in your image. It's the last button in the toolbar and it appears active in your screen shot.

Exporting Options in Final Cut Pro

Similar Messages

Maybe you are looking for