Exporting out of FormsCentral

I am having issues when trying to Export to PDF out of FormsCentral...it just hangs. I can Export to Excel and CSV just fine, but really need the PDF option to work.
I am running Windows 7 Pro SP1 ( IE9) I ahve also tried Mozilla and Chrome and does not work for me.
I am also running the latest Adobe Flash with Acrobat X.
HELP!!!!!
-Eric

Hi,
Can you please share your form with me at wdu@adobe,com? I'd like to try out and see if I could reproduce it from here. Here is a doc on how to share a form: http://forums.adobe.com/docs/DOC-2462.
Thanks,
Wenlan

Similar Messages

ProRes 422 (HQ) QT Export out of FCP getting error on re-import

The quicktime exports I'm producing out of my FCP system need renders when I drag them back into the project, into a seq. with the same exact settings they had on export. Even if I drag my export into the same sequence it was exported from!
I'm trying to export a self-contained QT with current settings from a Pro Res 422 (HQ) 1920 x 1080 50i Sequence .
On creating a new sequence, I select the sequence preset Apple Pro Res 422 HQ 1920x1080 50i, then cut in the media-- the media is a 90 min Pro Res 422 HQ quicktime from an online house, also 108050i.
Predictably, no render required. The frame rate, frame size, pixel shape, field, codec match between the media and the sequence.
However, if I export out of that sequence (using File – Export Quicktime; Self-Contained, Current Settings), then re-import the Quicktime and put it back in that same sequence or another new sequence with the same preset settings, it needs picture render. This is only if my export selection from the sequence is at least a few minutes long. If I set an in and an out for a :30 sec selection and export that quicktime, I can play that back in the sequence with no render.
The fact that there's some difference between a 90 minute export from my computer and a 30 second export from my computer could be a clue.
Additional info-- I have tried creating a new sequence with the wrong settings preset to get the FCP prompt "would you like to conform the sequence settings to match the file?" Then I click yes to conform settings and my quicktime export goes into the sequence-- with a red render bar. But if I then cut in the Pro Res HQ QT from the post house it will not need a render. These two QTs appear identical when I compare their item properties in FCP. On playback, in the viewer window, my export will appear a little stuttery.
Can anyone tell me what this means and if I can export a quicktime that does not need to be rendered to be played back in FCP?
Many many thanks!
I'm running FCP 6.0.5 on a 2 x 2 GHz Quad Core with 11 GB Ram. Mac OS 10.5.6. I have media running off of 2 external drives, connected via eSATA. Drive Speed on the externals-- need to double check.

The Error I referred to in the title -- I am getting the message "clip settings do not match any sequence presets" when I try to cut my export into a sequence. Seems bizarre because it just came out of a sequence preset, not a custom sequence, using "current settings."

OMF won't export out of final cut pro.

Exporting a 93min 1920x1080 HD timeline to OMF
5 second handles tried 2 second handles as well.
OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
Final cut 6.0.6
Have deadline. Didn't see it on any forum. Help!! Thanks!!

Seems like a weird thing to not be able to do since it's called final cut PRO...
Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
Shane

How to export out the date into the csv file?

Hi, I had been trying to export out the value of the date to csv file.
This is the script:
$strADPath = 'LDAP://dc=test,dc=com'
function ConvertLargeIntegerToDate([object]$LargeInteger){
try
$int64 = ConvertLargeIntegerToInt64 ($LargeInteger)
if ($int64 -gt 0)
$retDate = [datetime]::fromfiletime($int64)
else
$retDate = $null
return $retDate
catch
return $null
$objSearch = New-Object DirectoryServices.DirectorySearcher
$objSearch.Filter = '(&(objectClass=user)(samaccountname=user1))'
$objSearch.SearchRoot = $strADPath
$objSearch.PageSize = 1000
$objSearch.SearchScope = "subtree"
$objResults = $objSearch.Findall()
$dateAccountExpires = ConvertLargeIntegerToDate $objUser.accountexpires[0]
Write-Host "date Account expires: " $dateAccountexpires
$objResults| ForEach-Object{
$_.GetDirectoryEntry()
} |
Select-Object -Property @{Name="sAMaccountName";Expression={$_.sAMAccountName}},
@{Name="cn";Expression={$_.cn}},
@{Name="name";Expression={$_.name}},
@{Name="manager";Expression={$_.manager}},
@{Name="givenName";Expression={$_.givenName}},
@{Name="accountExpires";Expression={$_.dateAccountExpires}},
@{Name="department";Expression={$_.department}} |
Export-Csv -Path 'D:\test44.csv'
This is what I get in PowerShell ISE:
This is what I had get for the csv file for the expire date:

hi FWN,
the code had giving me error saying that it could not call method on a null-value expression.
$temp = $_.Properties
the code had gave error saying that it could not call method on a null-value expression.
$properties | %{ $res.$_ = $temp.Item($_) }
the code had gave error saying that it could not call method on a null-value expression.
with lot of thanks
noobcy

Export out of DRM/Import into PeopleSoft

Hello,
Do any of you have experience creating an export out of DRM to go into the PeopleSoft system to create trees? The PeopleSoft system has a Tree Import; however a file needs to be in a certain format for the Import to work. I wasn't sure if DRM was capable of creating a file in the correct format that PeopleSoft needs or if DRM should just export it's tree data and let the formatting be done by a different tool (ETL, App Designer, etc.). We are on version 11.1.1.2.103.
Below is a high-level example of what the Tree Import file should look like. The 999 lines would be the header lines, and each of the lines underneath the header has a different format (which is fixed-length).
999TREE_VERSION
Tree Version Data
999TREE_STRCT
Tree Structure Data
999TREE_DEFN
Tree Definition Data
999TREE_USERLVL
Tree Level Data 1
Tree Level Data 2
Tree Level Data
999TREE_LEVEL
Tree Level 1
Tree Level 2
Tree Level N
999TREE_USERND
Tree Node Data 1
Tree Node Data 2
Tree Node Data N
999TREE_NODE
Tree Node 1
Tree Node 2
Tree Detail 1
Tree Detail 2
Tree Node 3
Tree Node 4
Tree Node N
Tree Detail 5
Tree Detail N
Thanks in advance for any help you can give me!

how much i understand below are some points:
1- for tree format can be used DRM Export option tabbed output(Export-Style-Tabbed output).
2- For fix length attribute could possible to use Export- Target-Fixed width
you need to do some workaround to generate file as per peoplesoft requirement. Like Different -2 exports as per 999* header lines to meet requirement , hard code header if needed , club all exports in Book to generate one single file.
Please explain more on file format so that can try to help you better.
Thanks!
Sandeep

When exporting out of lightroom the color of my picture channges significantly

I use windows 8 and tried exporting out of lightroom through firefox and this did not help either

Hi Shmuglak. Thank you for the information. I tried those things but did not work.    I just got windows 8 and just downloaded photoshop CC and Lightroom from the cloud.   My settings in Lightroom under preferences are :   Under jpeg preview it is checked on fast load data.   Under external editing the color space is prophoto.   Under additional external editor it is set to preset (Custom). Under Default Develop Settings the only thing checked is apply auto mix when first converting to BW.   Under export module:   Location:   set to same as original folder and no check mark on add to catalog.   Under Post Processing I have tried do nothing and tried firefox.
It is funny that when I export a picture from lightroom using firefox that picture pops for preview and the picture looks fine but then when I go to my email and try to email that same picture and use send with a file attachment the picture looks aweful on my desktop but when looking at it on the ipad or iphone the picture looks fine.
Any other suggestions would be great
thank you
Date: Thu, 12 Dec 2013 00:56:36 -0800
From: [email protected]
To: [email protected]
Subject: when exporting out of lightroom the color of my picture channges significantly
    Re: when exporting out of lightroom the color of my picture channges significantly
    created by shmuglak in Photoshop Lightroom - View the full discussion
I don't know if this is your case but I have a similar problem (and has been helped out by some kind soul on this forum). The change of color may happen if you are re-importing the exported pictures into the Lightroom catalog. If this is what you are doing, some import presets may be applied and this may cause the color change. I'm talking about this setting, sheck if it is enabled. If it is, disable it and see if it helps.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5923235#5923235
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5923235#5923235
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5923235#5923235. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why are my photos desaturated when I export out of Lightroom 5 and editing with VSCO Film filters?

I have been excited working with VSCO Film presets, however when I apply them and go to export out of Lightroom 5 on my Windows 8 computer, my images are previewing very desaturated and muted in color. Some images are below. I thought it was a Color SPace issue, but when exported as sRGB as well as in its original space of Adobe RGB1998 it is still desaturated. Any help?? In Lightroom the colors are right, but my preview application is different.
Thank you!
JPEG
Screenshot of Lightroom preview on Left and Pictures preview on the Right.

Hi ssprengel,
Here's some clarification:
Here's a screenshot of my raw image in lightroom without any presets:
Here is a screenshot of my raw image with the presets (the way I want it to look upon export):
Here is a of the jpeg exported out of LR:
(on my screen the jpg looks like what it should when I attach it, but I know once I post this it will not look like it. That's something I noticed when I posted my question previously)
I took you suggestion and re-imported the sRGB exported JPEG and it looks like how it is supposed to be with the correct saturation. Here's a screenshot of the jpeg reimported.
Here is a screenshot comparing the LR5 preview to the Photos preview on Windows 8. The LR5 (left) is more saturated, the correct way I want it:
I cannot use Windows Photo Viewer because this is how my photos look like in it:
Hope this all makes sense! Thank you so much in advance!

Question on exporting out to DV/DVCPRO - NTSC

I am trying to conform footage to my Easy Setup in Final Cut Pro and for some reason, it won't. My Easy Setup is based on the DV/DVCPRO - NTSC setup with the aspect ratio being 720x480. When I export the footage out, it gives me 720x480 (640x480). That's fine.
So I switch it to NTSC 720x480 4:3 and it still exports out as 640x480.
I try the custom option and type in 720x480 and it still exports out as 720x480.
What am I doing wrong? Is it trying to conform the aspect ratio to what the original video size is? Thanks.

What am I doing wrong? Is it trying to conform the aspect ratio to what the original video size is?
You are confusing the rectangular pixel encoding matrix (720x480) with the square pixel display dimensions (640x480). You must remember that DV was historically developed as a broadcast compression format to more closely reflect the rectangular pixel presentation of older CRT televisions having 720x480 rectangular pixels to display the equivalent of a 640x480 square pixel image.
So I switch it to NTSC 720x480 4:3 and it still exports out as 640x480.
I'm not quite sure what you saying you want to do here. If you were to display 720x480 rectangular pixels on a square pixel device (e.g., a computer monitor, HDTV, etc.), then at 720x480 square pixels the image would look somewhat squat with people and objects looking shorter and fatter than they should be because you have changed the aspect ratio from 4:3 (640x480) to 720x480 which would then have an actual square pixel aspect ratio of 1.5:1 (or 3:2) rather than 4:3.
As an aside, a 16:9 anamorphic DV file would also encode to the same 720x480 data matrix but (as long as the flag is not lost) actually play back at either 640x360 or approximately 853.3x480 depending on the application in use and you would see an entry of 720x480 (853x480) or 720x480 (640x360) on the player Inspector or Info window.
So, unless you are saying that your file has lost its anamorphic value (which can happen in some workflows), it sounds as if everything is working correctly.

Best way to export out of AE to burn in encore.

I have a screenshot of my AE comp settings. I'm done with the project and would like to export out of AE now and burn a disc. I'm not sure about a couple things.
1. What is the best export settings.
2. I have Encore, but I'm not sure what's the proper way to burn the disc.
Any help is really appreciated.

I'm using CS6 on MAC. Would you still recommend Quicktime Animation based on my deeper explonation below?
The AE project has images zooming in and out. Please see the screenshot below.
Once the image of the dolphins zooms in and takes up the whole screen, then it fades to other pictures. Those pictures pan and zoom. Then the image zoom out and the process starts over for the next thumbnail. It's basically a slideshow.
Once it cicles through all the thumbs it plays a video clip. Please see the screenshot below.
With all this said I want to burn a DVD of this project at the best quality possible. Please let me know what is better. Open the AE project in Encore and burn from there? Or Export out of AE as a Quicktime Animation and then burn with Toast or Encore?
Thank you for your advice!

Why do I loose sharpness when I export out of Aperture?

My images look almost blurred once exported out of Aperture 3.0. ! I am finding in my reading that others have been having this problem for years! Has Apple not fixed this yet? I may have to go to Photoshop, but really don't want to!!!

That doesn't sound right at all. My exports looks fine. I wonder if it could be some kind of glitch or something...
Just out of curiosity, what do your export preferences look like? What quality setting do you have for jpegs, and what dpi for external editor file format? How about the dpi in your export presets you've been using? How about your RAW Fine Tuning sharpness sliders? (although that would affect how your images appear in Aperture, although it is subtle)
Aperture has limited (but effective) sharpening options, and by default rendering the images are softer than what you might be used to if you used to process your RAW images with ACR (Photoshop, Lightroom). But I was able to match the default ACR rendering (in terms of sharpness, I mean) with Aperture by maxing out the sharpness sliders in RAW Fine Tuning and applying a Sharpen Edges adjustment with only mildly aggressive sharpening.
Oh, that reminds me, which sharpness adjustment are you using? Sharpen is from the previous versions of Aperture, and is included for legacy/compatibility purposes with images that were processed in Aperture 1 & 2. Sharpen Edges is much more advanced and is generally recommended over the other.
Doug

Subjects' faces look red from export out of Motion 4

Hello,
I am using Motion 4 and FCP 7 for a video project. When I export out of M4 into FCP 7, the subjects' face look reddish. I originally exported from FCP 7 into Motion 4 and added text and other graphics. When loading the video exported from Motion 4, I am having problems with the red faces. Any suggestions? Would appreciate your feedback.
Thanks,
Mike

This is a part of Final Touch that was lost when it got married to FCP as COLOR. The issue you now have is that COLOR doesn't actually create export lists, it modifies existing XMLs (and cut-lists) that are created at the time of SEND To... from FCP. I'm gathering you did a form of CMX 'import as cut-list' to get the media and event/clips into COLOR. And then there's no apparent way out.
If its a CMX-flow, it was probably a V1-only list, all cuts. If all the material was rendered back to 10-bit Uncompressed, then that media exists somewhere, all neatly tucked into individual folders numbered corresponding to their order in the cut list. In the old days, we would do a FinalGather which would herd all these clips into either a reference Quicktime or a folder where the clips were exposed in such a way that you could grab them all and drop them onto a Final Cut sequence. There are some automator scripts laying around here and there for pulling all the clips into a single directory... it'll take a bit of searching, or you can create your own.
If I'm on the right track with this, creating a new FCP timeline with the rendered media is as simple as selecting them all and dropping them on a new sequence, since they are oriented with names like 1_g1.mov, 2_g1.mov, and so on. Search for those with Finder if you haven't already, and then you'll know what to do. The tough part is that they, each individual clip, are all imbedded in their own folder which makes it a beeotch to wrangle them as a collection.
jPo

Premiere Degrading Quality (after rendering) of Animation Codec mov's and 4444 Codec mov's, which were made from SWF files, originally exported out of After Effects

I am making a cartoon, which was created in FLASH,
Then the SWF's were put into After Effects and exported out as MOV's. (I've tried both AppleProRes4444 and Animation codecs).
Then I put those Mov's into Premiere. Everything looks crisp until I render. Once rendering is done, the video quality degrades. Here's a screen shot of Premiere:
On the left is the source MOV (exported from AE), on the right is the timeline viewer (after rendering). The quality on the right is degraded. Help?
If I use MP4 versions, exported out of Flash, through Media encoder, quality is not degraded.
(Read on for additional info)
It was easy and quick to create my MOV's out of AE, which is why I did it this way. I'm exporting to MOV's so I can edit quicker in Premiere. I find editing to sound in AE really difficult, and I don't edit in Flash (employees provide SWF files to me).
Here is sequence settings in Premiere (these setting were created by dragging an MOV into the sequence and choosing "change settings" to match clip settings.
Help? Please?

I am making a cartoon, which was created in FLASH,
Then the SWF's were put into After Effects and exported out as MOV's. (I've tried both AppleProRes4444 and Animation codecs).
Then I put those Mov's into Premiere. Everything looks crisp until I render. Once rendering is done, the video quality degrades. Here's a screen shot of Premiere:
On the left is the source MOV (exported from AE), on the right is the timeline viewer (after rendering). The quality on the right is degraded. Help?
If I use MP4 versions, exported out of Flash, through Media encoder, quality is not degraded.
(Read on for additional info)
It was easy and quick to create my MOV's out of AE, which is why I did it this way. I'm exporting to MOV's so I can edit quicker in Premiere. I find editing to sound in AE really difficult, and I don't edit in Flash (employees provide SWF files to me).
Here is sequence settings in Premiere (these setting were created by dragging an MOV into the sequence and choosing "change settings" to match clip settings.
Help? Please?

Freezing while exporting out of premeire cs6?

I am having problems exporting out of premiere cs6. It completely freezes halfway, all of my settings match, does anybody know why this is happening?? please help.

Thank you Mr. Hunt, I found out that it was one of the clips in my TL it was a motion Jpeg,, I had to export it out as a H.264. Thanks for your help.
Date: Tue, 19 Feb 2013 16:01:47 -0800
From: [email protected]
To: [email protected]
Subject: freezing while exporting out of premeire cs6?
    Re: freezing while exporting out of premeire cs6?
    created by Bill Hunt in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
For that error, perhaps this Adobe KB Article will be useful? http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering -or.html Good luck, Hunt
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5086487#5086487
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5086487#5086487
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5086487#5086487. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Having An Issue exporting out an AAF from Premiere 8.1.0

So I'm working on a Documentary Feature Film and we're using Premiere . We are about 4 weeks away from Lock and i now have a full sequence in which i can test the AAF process, especially as this was one of the bugs which was supposed to be 'fixed' on this version. When exporting out the AAF it takes absolutley ages. I have split the Tracks up so i'm only doing 1 Track at a time, with 75 frame handles. The Film at the moment is about 2 hours and i don't think we'll be losing too much off it.
When i tried exporting out it went very slowly on the same clip. I then rendered and replaced the whole track so everything was AIF like audition converts it to anyway and repeated the process. It did the same thing so i though i'd let it go over night to see if it made it through the night. It had got further but was now having the same issue with another clip. So over 7 hours and still no AAF made.
The only way i have got it out at a reasonable rate is to send to Audition and export as an OMFI but not embedded as the file size was too large. I have a suspicion that the AIF format perhaps is causing the same issue with the AAF, although AAF shouldn't be as restricted as an OMFI. I have only ever used AAF's with Media Composer ( MXF's) and have worked on 90 minute shows and managed to send out all the tracks ( around 12) as an embedded AAF.
Is this a known bug, i looked across the forums but couldn't find anything on search. I would expect that Premiere could deal with this seeing as it has handled other Features.

I think i have found the reason for this and a workaround for it. However it would be good to be fixed in the next update !
So what i think it was was that some of the recorded sound came as a wav which was 5 mono tracks. When normally sending straight out as an OMFI or to Audition it was seeing these as a full 5 tracks each time therefore one track would be the equivalent of 5.
Workaround is as follows for future reference :
Working from a copy of the project
1)Delete all video tracks and then render and replace audio. This creates extracted audio which you then need for the next step.
2) Project manager the Sequence as it's just extracted audio it won't copy video files so should give a reasonable size folder.
3) Open the project managed project which will reference just the extracted Wav's but it also loses the tie between the combined tracks
4) Then one track at a time export out an OMFI embedded.
Weirdly the AAF was still having the same issues after this. So i believe that was a red herring. Premiere just seems to struggle embedding with an AAF. OMFI is fine though.
This is quite a roundabout way but works with no issues . Adobe please fix this, FCP and Avid work first time without all of this mucking around.

Can DVDSP export out QT files??

Hi
I having real troubles with getting the correct file from my captioning house for subtitles for a QT file for use via computer and data projector.
I wanted to be able to put subtitles on a file and export it out as a QT and also as WMV as my client uses PC.
They originally sent an XML, is this the best file to use? but it is not syncing up, their file is too long, but it may be something to do with the frame rate??
Anyway, they have now sent a .STL file, which also won't sync up in DVDSP. What they also said is, if this file works in DVDSP, then I would be able to export out a QT file. Is this possible from DVDSP, and if so, how do I do it??
Any help would be really appreciated as I'm overdue on this project and getting nowhere with just trying to put subtitles on a FCP project !!! silent scream.
Cheers, Margie

I believe you can export video including subtitles - but not as a quicktime file if it isn't already one. I've only ever worked with MPEG-2 files in DVD SP but my understanding is that it will not do encoding, only muxing and exporting videos as the existing file type they are already in.
Sorry to be the bearer of bad news, I hope this at least brings you a little bit closer to a solution!

Exporting out of FormsCentral

Similar Messages

Maybe you are looking for