Exporting pdf's from InDesign

I'm looking for a simple and effective way to export my InDesign document as single page pdf files, with a specific filename suffix. I'm hoping that the file name suffix can come from the numbering and section options from my InDesign document.
To be specific, I have a 12 page document, each section being 2 pages or more. What I need is single page pdf files with the follwoing naming convention filename_sec[n].pdf. If I extract as separate pages through Acrobat, it will only make filename [n].pdf, not what we need.
I'm using InDesign CS3 and Acrobat 8, all part of Design Standard CS3. Any help is appreciated. Any direct specific questions or advice, please email [email protected]

"looking for a simple and effective way to export my InDesign document as single page pdf files"
You may have to define a custom page layout size in InDesign that can hold all of the content.
"hoping that the file name suffix can come from the numbering and section options from my InDesign document"
Not certain this can be achieved automatically or by a Preferences setting.

Similar Messages

  • Printing an exported PDF file from InDesign

    I have exported a few documents form InDesign to PDF. When I print the documents, some parts get cut off (top section or bottom section) but there is still room on the paper. I'ts like the printer decides not to print those sections. I am printing on 5x7inch paper and all my documents show their sizes as 5x7inches.

    Here is an image I think might help... When I choose any of the size options, (fit, actual size, shrink oversized pages, or custom scale) it prints the doument exactly how I see in the preview whether or not I have the "Choose Paper Source by PDF Page Size" box checked.

  • Why icannot export pdf file from other app to ibook (after update today)?. Please correct my problem. iPad 2, iOS 5.0.1

    Why icannot export pdf file from other app to ibook (after update today)?. Please correct my problem.
    iPad 2, iOS 5.0.1

    Why icannot export pdf file from other app to ibook (after update today)?. Please correct my problem.
    iPad 2, iOS 5.0.1

  • Exporting PDF files from SSRS 2012 - "There was an error opening this document. The file is damaged and could not be repaired"

    Good day
    I have the situation where we are exporting PDF files from reporting services in our website. 
    When dividing the data into sections, the report exports perfectly, but when exporting the entire set and trying to open the file, we get the following error in Adobe Reader:
    "There was an error opening this document.  The file is damaged and could not be repaired"
    We tried to repair the file, no luck.  We tried to use different PDF readers, no luck
    We then checked the file sizes.  When exporting the subsections, each section exports a file of about 2mb. 
    When exporting the entire set, the file is about 1.3mb. 
    Adding all the sections together gives me a rough estimate of 40mb.
    Exporting to TIFF works beautifully and returns a file of 41.5mb. Word and Excel formats also work well, only issue there is the page numbering and formatting.
     The problem we have is the clients are adamant about having it in PDF format.
    Any advice please?

    This was one of the temporary suggestions I gave the client...
    Unfortunately they do not like this as the page numbering and formatting in Word does not appear right.  We are talking about over 1300 pages.  I can't expect them to change the formatting with each export.  Additionally,  the data is
    constantly changing and each client has their own data.  The clients export the reports randomly.  I therefore can't post the reports back onto the server.
    Thanks for the speedy response though

  • How can I maintain multiple white spaces in a PDF written from InDesign?

    I need to have 2 white spaces maintained (within a part #) in the PDF I write, but when I open in Acrobat it converts it to one space.
    I've tried word spaces, set spaces and applying "no color" to a placeholder character and nothing is working!
    Any ideas or suggestions?

    I am talking about normal white space. Multiple fixed widt spaces are not a problem. How the space is handled in a PDF depends on how it is created.
    Viele Grüße
    Wilhelm Georg Adelberger
    Von meinem iPhone gesendet
    Am 21.08.2014 um 12:01 schrieb Peter Spier <[email protected]>:
    How can I maintain multiple white spaces in a PDF written from InDesign?
    created by Peter Spier in InDesign - View the full discussion
    It may not be a great idea to use multiple spaces, but it certainly is not prohibited and sometimes is necessary -- you might want a 2em space, or a thin space before and after a tab you underline in a form.
    I'm able to select the multiple spaces just fine in Acrobat 9 using the text touch-up tool.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6661037#6661037
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in InDesign by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6

    Hi..I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6. The problem is that I have got a financial report of about 100pages to export as EPUB, with lots of graphs etc..and when I export it, to EPUB 2.0, the following happens:
    1. The image quality is quite low (even if the original images are of high quality, and during export, i put the image to max quality)
    2. The graphs do not appear where they should be! All the imags in fact appear after the long paragraphs of text..meaning everything appear quite messy and in an unordered manner.
    I have read that images should be anchored, and doing so, the result is quite better, but still, some images appear at the end of the text!!d
    That is, the end result, in terms of pagination and graphics, is no way like it should have been, compared to the indesign file (page 5 is displayed after page 10, image on page 4 appears on page 9 etc..)
    PLEASE HELP..
    P.S :
    I am using Adobe digital edition to view my EPUB..I have also tried CALIBRE and SIGIL!! But I am not too sharp in eiting CSS codes etc...

    Hi Akshay,
    If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
    This is how you can specify a page break:
    1. Select the image
    2. Goto Object->Object Export Options
    3. Select EPUB and HTML tab
    4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
    Regarding your question about images:
    You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
    Regards,
    Pooja

  • PDF Bookmarks - Change Default Width When Creating PDF File from InDesign

    When creating a PDF file (from Indesign CS4) I automatically create the PDF bookmarks based on the InDesign document's Table of Contents.
    But by default the width in the bookmarks is always set at "Fit Page".
    Is there a way to change the default to "Fit Width" in Indesign before the PDF is created?
    It's too much trouble to change every bookmark in the PDF after it's created.
    Thanks for any help in advance!

    Thanks, Steve. I have actually previously done what "fogharty" suggests and it does work if I want to set the pages to "fit width" or a variety of other options. However, none of the options is inherit zoom which is what I, and many other from the sound of the thread, need and want. We want to respect our end users--not dictate how they must view our PDFs. Hopefully, Adobe will listen and make this option available soon.

  • "Save as pdf" button from InDesign

    Is it possible to make a "save as pdf" button from InDesign ?
    Best regards, Mette Louise

    Well, I'd say that, but if the button is to run Acrobat JavaScript it comes back to an Acrobat forum. But my question is: what would it do? The file is already a PDF.

  • PDF Files from InDesign much larger than Quark- Distiller, why?

    We've recently switched our publishing workflow for one of our pubs from Quark to InDesign, and are having issues with PDFs being really large. Previously, the pub would be PS'd out of QXP6.52 and then ran through our Distiller service at Press Ready quality settings. The resulting PDF files were 4-6mb (This is only a 2-page pub).
    Now, moving to InDesign, we PDF directly from InDesign (or I've also tried PSing and then Distilling), and using Press Ready Quality settings still -- the resultant PDF files are 15-16mb. Can anyone theorize as to what would create such a large difference between the two?
    This is using a few issues of the pub - not just one instance, as well.
    Thanks

    [email protected] wrote:
    7. Yes, the file and links are using transparency.
    This is probably the answer.
    Recreate the page in InDesign with no transparency (as a test). This means all links are tiff or eps. No use of opacity or blend modes. No drop shadows.
    This is how it would have been in Quark 6, which did not support transparency (the newer kind anyway)
    Note: if you had overlying drop shadows in Quark 6 they would have had to have been bitmap tiffs.
    I also should mention: transparency is a good thing. There may be a way to get the file size down without removing transparency. Possibly you could use Acrobat to do this.
    Also note I posted a couple of updates on my previous post, they may or may not be relevant.

  • How do I import and export PDF's from Ibooks

    How do I import and export PDF files from Ibooks on the IMAC running Mavericks?
    How do I sync my PDF files in IBooks to the IPAD when they were not purchased from the bookstore?
    I noticed that I could email the PDF and then add it to IBOOKS on the IPAD.
    Is there a 3rd party IBOOK type reader that will address this issue?
    When I upgraded Mavericks it moved all of my PDF files in ITUNES application to IBOOKS and removed all reference to those
    books in ITUNES. When I purchase a book from IBOOKS store on the IMAC, the books shows up in IBOOKS on the IPAD.
    All of my PDF files will not sync up with the IPAD.
    I do hope this is a problem that Apple will address and would like to know when the fix will be available.

    Hello,
    Thank you. I found that option you pointed out. I can now change it from 1080i to 1080p and I can chance the resolution. However I still can't change the frame rate. It still stays at 29.97.
    Could this be due to the camera? I am using a Canon VIXIA HF S100 with 30p and 24p frame rate options. I suspect that it does not really shoot at true 24p and only does 24p within 60i.
    Frankly, I don't really care about getting 24p support too much but it would be very nice to have the option.
    I'll keep toying with the program. Still, anymore ideas or thoughts would be greatly appreciated.
    Thank you Wild Giles.

  • Examples of interactive PDFs generated from InDesign

    Where can I find examples of interactive PDFs generated from InDesign? I offered it as a solution to a customer and they would like to see examples. All I am finding are tutorials. Thanks!

    AdobeAcrobatShowcase

  • Cannot overwrite PDF when exporting to Acrobat from InDesign CS6

    When exporting to Acrobat Pro X from InDesign CS6, there are times when I want to overwrite an exising file but I get an error msg that the file is in use (it is not--this even happens when I have closed the file and quit Acrobat) or i don't have permission. In the Info panel at the Finder, i see that "myusername (ME)" does have permission to read and write this file. As a test, I also changed the permissions for Admin and Everyone to Read & Write, but that did not help. I've checked Preferences in both InDesign and Acrobat Pro anc can't find a relevant setting.
    To save the file with the same filename as the pre-exisitng PDF, I have to close the pre-exisitng PDF and move it to the trash.
    I have no problem overwriting a PDF document from Acrobat. This only happens when I am exporting from ID.
    I am on a Mac running the latest version of OSX.
    Any ideas?
    Thanks!
    Carol Gunn

    Make sure that the PDF you are trying to overwrite is not selected in your finder. I've found that if it's selected in the finder then the preview tricks Indesign into thinking the file is busy

  • Urgent text shifting problem with pdf creation from indesign

    I have eps files placed in indesign and when some pages of my document are exported as pdf for press, the text moves slightly, like 1/16" or less, but enough to cause problems.  I'm using the original Indesign CS and eps files saved out of Illustrator 10.  Yup, old.....I know, but it's what I have to work with right now.  Some files are working fine but others are don't and they were all created/saved/exported the same, as far as I can tell.  Here's a small sample.  All the street name text is shifted down and to the left from the actually street.  Occurring with text on path as well as straight text.  Any ideas greatly appreciated.

    You might also try exporting to .idml form CS5 (see Remove minor corruption by exporting). We've had other reports of similar beahvior when working with legacy files, and exporting to .inx from the original version may work even better.

  • Why do colours change in PDF created from InDesign book?

    Please help.
    I've created a Book from 5 InDesign documents that have images text and some Illustrator drawings in.
    When I export the Book to PDF some of the colours in the Illustrator graphics are different (the graphics are all vector based maps with some text). Not all colours are changing, seems to be different blues showing as one green in the PDF.
    Same thing happens when I print the Book from InDesign.
    Could anyone tell me what I'm doing wrong.

    Help!  I too am having problems when creating a pdf in InDesign.  My colors are all Pantone process colors.  My specific problem is that when I export my book cover to a PDF, my process black is changing to gray.  This ONLY happens with pdfs.  When I save as a jpg things are fine.  It will print fine.  I have been scaling it down, but i prints black.  Help!  This is a project due for a typography class on Monday and must be printed and mounted for class.
    Mary

  • PDF Files from InDesign to larger

    Hi
    I just upgrade my acrobat pro to 9.3.3. And im running Snow leopard.
    So - now the ps (print postscript) option is also gone for me.
    I have som old files from indesign, i printet at ps file and used my
    distiller to make the pdf file.
    Result = 168 kb
    If i export this from indesign, CS4
    I use same distiller settings
    Result = 860 kb.
    If i export this from indesign, CS4
    I now use smalles file settings
    Result = 290 kb.
    WHY is it not possible to make smaller pdf files direct from indesign.
    Also Press files get very large.

    Here's an article explaining some of the things stripped from your document when you use Distiller, compared to the Export function in inDesign
    http://indesignsecrets.com/creating-pdf-export-or-use-distiller.php

Maybe you are looking for