Exporting Prem Proj from AE gives an error when importing

When I export a .prproj from After Effects and then open it in Premiere, I get this puzzling error. Everything seems fine enough. But I can't find any reference to "desktop mode" in the Adobe help. Using CS5 of both versions and not using dynamic link.

It's called "Custom" in CS5.5
Create a custom sequence preset
The message you are getting only means that your Ae comp
does not fit exactly into one of the built-in sequence settings
that are in Premiere.
Can you still clear the message and open your Ae project?

Similar Messages

PP CS6 give "general error" when importing MXF files

Hi there,
I'm a videographer at a school and they recently purchased CS6 for me to use to edit footage. I shoot on a Sony PXW-X70.
However, anytime I attempt to import using Media Browser (or the input feature) any files from the camera, PP gives me an error (seen below).
The camera outputs XAVC files wrapped as MXF. I've tried importing files from this camera as well as from a Sony F5 and both sets of files don't work. I got the F5 files to import, but they don't play. However, I have also tried importing footage from a Canon XA10 and they did import correctly. So, it clearly has something to do with these MXF files.
I also downloaded a trial of PP CC and it imported the MXF's no problem. Adobe's literature seems to say that CS6 should import the MXFs without a problem.
Any thoughts?

Hi Brian,
Thanks, Kevin.
Interestingly I tried a live chat with Adobe and they definitely told me the support cycle ended for CS6 and I'd basically have to ask a question on the forums here. But I'll try again and say it's an installation issue.
I'll let you know how it goes!
Yeah, you have to be very literal about it being an installation issue. If you still get the runaround, let me know and I'll have an agent contact you.
Thanks,
Kevin

Launching iStore from jDeveloper gives Application Error

Hi All,
Launching iStore from Jdeveloper gives application error. I am new to this arena. Here is the actual description.
We are on 11.5.9 system however applied the RUP1 of Sales and Marketing for 11.5.10 which inturn gave us the 11.5.10 iStore.
I am using jDeveloper 10g with J2SE 1.4.2_06 as per the instruction. Intially all the test files for db , session worked fine as per the suggestions from oracle Metalink Note# 419887.1 . I could also load the login page initially though upon entering the login details it gets me to the same application error page. After some clearning of cache files and reloading the jdeveloper this time it does not even take me to the login page and gives the application error message.
Here is the acutal message : The application is currently not available or an unexpected error has occured. Please try again later.
If this message persists, please contact the system administrator.
I can login to the UI from the actual server but not sure why it does not work from the jdev. Please guide me and let me know what went wrong. Here is the sample guest log file.
15:40:4:391 [Session.checkContextValues] party id is null
15:40:4:422 [Session.setParty] Enter: party id=null
15:40:4:422 [Session.getCustomerId] Enter: GUEST
15:40:4:438 [Session.getCustomerId] Call stmt.executeQuery
15:40:4:469 [Session.getCustomerId] Call rset.next()
15:40:4:485 [Session.getCustomerId] Get customer id
15:40:4:501 [Session.getCustomerId] customerId is 82238
15:40:4:516 [Session.getCustomerId] Exit
15:40:4:516 [Session.setParty] partyId = 82238
15:40:4:516 [Session.getPartyType] Enter 82238
15:40:4:547 [Session.getPartyType] party type = PERSON
15:40:4:594 [Session.setParty] party type = PERSON
15:40:4:594 [Session.setParty] user is individual user
15:40:4:657 [Person.findByPartyId] query: SELECT PARTY_ID,PARTY_NUMBER,PARTY_NAME, PERSON_FIRST_NAME, PERSON_MIDDLE_NAME, PERSON_LAST_NAME,OBJECT_VERSION_NUMBER, STATUS, STATUS_CODE FROM HZ_PARTIES P, FND_USER F , JTF_UM_USERTYPE_REG UT WHERE P.PARTY_ID = F.CUSTOMER_ID(+) AND UT.USER_ID(+) = F.USER_ID AND P.PARTY_ID=:1 AND P.PARTY_TYPE IN ('PERSON','PARTY_RELATIONSHIP')
15:40:4:797 [StoreProfileCacheLoader.load] Enter
15:40:4:813 [StoreProfileCacheLoader.load] val = nul
15:40:4:813 [StoreProfileCacheLoader.load] Exit
15:40:4:829 [IBEUtil.getStoreProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:860 [IBEUtil.getSpecificProfile] Enter; profile=IBE_DIAG_EMAIL_ADDRESS applId=null respId=null
15:40:4:876 [IBEUtil.getSpecificProfile] Exception caught: Exhausted Resultset
15:40:4:876 [IBEUtil.getSpecificProfile] value=null
15:40:4:891 [IBEUtil.getSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:891 [IBEUtil.getStoreSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:891 [ibeCZzdError.jsp] Email: null
15:40:4:907 [RequestCtx.end] PERF: REQUEST STOP
Thank You
Srikanth

You're in the wrong forum. This one is dedicated to Oracle forms. Try either the eBusiness-forum, or the JDeveloper-forum.

When i export a movie from imovie08 i get error 36. What to do?

when I export a movie from imovie08 i get error 36. What to do?
it is to export to a large file to an external hard drive what should i do to get it exported?

I am having the same problem and its only one movie, all my other movies will export. and it is even smaller than some of the ones I can export. Please I really want to show this clip to my friends from a vacation I went on. Any help would be most wonderful

Spectrum digital DSK5416 driver setup gives an error when test wizard is run.

Please help us with the following problem we are facing:
1.   Spectrum digital DSK5416 driver setup gives an
error when test wizard is run. A snap shot of the same has been
attached.
2.   The A/D module doesn’t pickup microphone signal or
an audio sample for loopback but the implementation of the same works
fine in CCS environment. (We are using Mic In and Speaker Out lines)
3.   When a real-time application has run successfully
and if you close the VAB environment the application starts running
automatically until you reset the board.
4.   We don’t find the flash program button enabled, so
that any real-time program can be burned into flash and demonstrate the
embedded feature.
Note:
We are using Windows Xp professional edition.
Program is developed using DSK5416

Hello, I have included some information that will help address your questions: (1) I couldn't see the attached image file (contained errors). The RIDE/VAB DSK5416 Driver makes use of a JTAG communication when reading/writing memory on the DSK5416 hardware. You will need to make sure that the JTAG transfer option has been selected in the Driver Setup dialog box. The memory test process may seem to take a long time due to the amount of memory being accessed. (2) The VAB RTDSKAD block component provides a one-channel A/D input that makes use of the line-in channel on the DSK5416 hardware. (3) VAB does not remove the downloaded DSP executable program from DSK5416 memory, and it does remain resident. That being said, I wouldn't expect that the program would begin execution when VAB is closed. I would recommend that you verify that the DSP program stopped properly upon selecting the VAB Stop command. Then, close VAB as normal. (4) The RIDE/VAB driver for the DSK5416 does not support programming of flash memory on the DSK5416 hardware. Regards, Steve

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

Error when importing CO Hierarchies from R/3 DEV to R/3 QAS

Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...

Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja

Error when importing from Excel in SAP

Hello experts,
My gets error when importing price list using the import form Xl menu :
(-1200) DBMCconnBase::EndTransaction SQLEndTran sqlState 08S01, nativeErr: 0, errText:[Microsoft][SQL Native Client] Communication link failure
This happens only when connected with SAP Client, it never happens when connected in terminal server directly on SAP server.
Server 2003, MSSQL 2005 SP2
SAP 2007 Sp01 PL08 HF01
This has always been working before, it has stopped working when he changed the motherboard 3 weeks ago. Nothing else have changed.
Any idea where to look at?
Thanks!
Chris

hello Gordon,
Thanks for your answer. that would have probaly fix the issue
my techs fixed the issue by doing the 2 following thinks, i don't know if only one of them would have fix it.
1. in the boot.ini file there was a /3G in the end, restricting the memory to 1G for the OS. The tech deleted it.
2. in management studio, the technician changed the memory reserved for sql from 9/12 to 14/16Gb
there was probably not enough RAM available for the import.
since that change it works well.
Thanks again!
Christophe

Export an animation from edge cheer up and when I get moment to muse that had the old animation anteriomente and just let me see the new animation when it in your browser

export an animation from edge cheer up and when I get moment to muse that had the old animation anteriomente and just let me see the new animation when it in your browser

Hi
Could you please elaborate your query and provide us with more details on the issue you facing?

ORA-907 ERROR WHEN IMPORT (COMMENT 처리)

제품 : ORACLE SERVER
작성날짜 : 1997-10-15
ORA-907 ERROR WHEN IMPORT (COMMENT 처리)
========================================
ORA-907: missing right parenthesis error
이 error 는 export 한 table 을 create 시 comment 를 사용한 경우 발생하는 ORACLE error 이다.
이는 version 8.0.4 에서 fix 되었다.
이를 해결하기 위해서는 미리 table create script 를 돌려 temp_table 을
create 하십시오.
이 때 comment 를 모두 뺀 상태로 create 한다. 또는 /* */ 는 괜찮다.
이후 INSERT INTO temp_table select * from original_table ;
을 실행합니다.
즉 original_table 을 temp_table 로 copy 한 후
drop table original_table;
rename temp_table to original_table ;
을 한 후 table을 다시 export해서 다른 machine으로 import한다.
또 이 -- 를 없애는 방법으로 아래의 C program을 이용할 수 있다.
/* file name : cnvt_dmp.c
* This program is to covert double dash remark expression
* C language stype remark expression.
#include <stdio.h>
#define MAXWORDS 4
char s_reserve[4][100]={ "NOT NULL", "CONSTRAINTS",")",","};
int dash2remark();
void main(argc,argv)
int argc;
char *argv[];
FILE f_in, f_out;
int i,j,lreserve;
int chr1,chr2;
char str1[100],str2[100],str3[100];
if( argc != 3 ) {
printf(" usage : cnvt_dmp infile.dmp outfile.dmp \n");
exit(0);
if( (f_in = fopen(argv[1],"r")) == NULL ) {
printf("could't open the source file.: %s\n",argv[1]);
exit(0);
if( (f_out = fopen(argv[2],"w")) == NULL ) {
printf("대상화일을 생성할 수가 없습니다.\n");
exit(0);
j = i = 0;
while( (chr1 = fgetc(f_in)) != EOF && !ferror(f_in)) {
if( chr1 == 'D' ) {
str1[0]='D';
fputc(chr1, f_out) ;
for(i=1;i<7;i++) {
chr1 = fgetc(f_in);
str1[i] = chr1;
fputc(chr1, f_out) ;
str1[7] = 0;
strcpy( str2,"DEFAULT");
if ( strcmp( "DEFAULT",str1) == 0 ) {
lreserve = 0;
i =0;
while( (chr2 = fgetc(f_in))!= ','){
if ( chr2 == ')') break;
str2[i] = chr2;
if ( chr2 == '-' )
lreserve = 1;
i++;
str2[i] = chr2;
str2[i+1] = 0;
printf(" lreserv => %d, str2=>%s\n",lreserve,str2);
if (lreserve) {
dash2remark(f_in,f_out,str2);
else {
for( i=0;i<strlen(str2);i++) fputc(str2,f_out);
else {
fputc(chr1, f_out );
fclose(f_out);
fclose(f_in);
return;
int dash2remark( f_in,f_out,str)
FILE f_in,f_out;
char *str;
int i,j,start_pos=-1,end_pos=-1;
for( i=0; i < strlen(str); i++ ) {
if ( str[i] == '-') {
start_pos = i;
for( j =0 ; j < MAXWORDS; j++){
if (strncmp(s_reserve[j],str+i,strlen(s_reserve[j]))== 0){
end_pos = i;
if ( start_pos > 0 ) {
for(i=0;i< (start_pos-1); i++)
fputc( str[i],f_out);
fputc('/',f_out); fputc('*',f_out);
for(i =i+2;i<(end_pos-1);i++)
fputc(str[i],f_out);
fputc('*',f_out); fputc('/',f_out);fputc(' ',f_out);
for(i;i<strlen(str);i++)
fputc(str[i],f_out);
else {
for(i=0;i<strlen(str);i++)
fputc(str[i],f_out);
return(1);
이상입니다.

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

"error when importing object" when selecting variant

Hello,
we recently migrated from 4.6 to 4.7.
For some programs, when selecting a variant, this gives a runtime error, like
Error when importing object "C131A2"
What is the cause of this? Because the values in the variant aren't valid anymore?
How can this be solved?
Thanks in advance for the help

Glad to help - you'll likely have to run it after every upgrade (for different reports).
Rob

CL_SFW_SYSTEM_SETTINGS error when importing SPs

When we want to import the support packages SAP_BASIS, SAP_ABA, SAP_BW,
PI-BASIS untill packages level 7 ( we come from level 4) and the HR
untill package level 26 we run into the short text error when importing
the basis, aba, pi-basis and bw package.
I tried to use the following notes:
1281321 but this gives the error: DEQUEUE_ENQBADIIMPL_ENH
1483283 but this fails also as when I perform tp unlock_EU <SID>
pf=/usr/sap/<sid>trans/bin/TP_DOMAIN_<SID>.PFL it tells me it need to be done
via SE03.
1532661 this one sents me to note 1414700 and 1366282 but the last ones
sents you back to 1483283 and note 1414700 when I want to implement it
with snote it tells me I need to use transaction SE03 for system settings.
Is there any other option to get this issue fixed? as we need to upgradesome other systems aswell with these support packages
Dump message is:
Runtime error          SYNTAX_ERROR
Datum en tijd          27.06.2011 14:05:47
Korte tekst
     Syntax error in program "CL_SFW_SYSTEM_SETTINGS========CP ".
Wat is er gebeurd?
     Error in the ABAP Application Program
     The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program
      "CL_SFW_SYSTEM_SETTINGS========CP " in include
      "CL_SFW_SYSTEM_SETTINGS========CCIMP " in
     line 215:
     "Type "SFW_BF_STATE_CHANGE" is unknown"
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
      terminated because it has
come across a statement that unfortunately cannot be executed.
enanalyse
The following syntax error was found in the program
CL_SFW_SYSTEM_SETTINGS========CP :
"Type "SFW_BF_STATE_CHANGE" is unknown"
Startpunt van runtime error
    Programma                               CL_SFW_RO_FACTORY=============CP
    Include                                 CL_SFW_RO_FACTORY=============CCIMP
    Regel                                   1.889
    Moduletype                              (METHOD)
    Modulenaam                              INIT
1862           obj = obj.
1863   ENDMETHOD.                    "create_object
1864
1865   method get_instance_for_locals.
1866     create object reg.
1867     reg->obj_factory = factory.
1868   ENDMETHOD.                    "get_instance_for_locals
1869
1870 ENDCLASS.                    "lcl_sfw_obj_registry IMPLEMENTATION
1871
1872
1873 ----
1874 *       CLASS lcl_sfw_system_settings IMPLEMENTATION
1875 ----
1876 *
1877 ----
1878 class lcl_sfw_system_settings implementation.
1879
1880   method get_instance.
1881     if ( singleton is initial ).
1882       create object singleton.
1883       singleton->init( ).
1884     endif.
1885     instance = singleton.
1886   ENDMETHOD.                    "get_instance
1887
1888   method init.
>>>>>     me->system_settings = cl_sfw_system_settings=>get_instance( ).
1890   ENDMETHOD.                    "init
1891
Edited by: C. Bults on Jun 27, 2011 2:35 PM
Removed customer system name

The following is the solution.
Symptom
When you import the Support Packages SAP_BASIS 7.00 Support Package 14 and
Support Package16 in a queue, the runtime error SYNTAX_ERROR occurs in
class CL_SFW_SYSTEM_SETTINGS (program CL_SFW_SYSTEM_SETTINGS========CP).
More Terms
Syntax error, CL_SFW_SYSTEM_SETTINGS, SPAM, SYNTAX_ERROR,
CL_SFW_SYSTEM_SETTINGS========CP
Cause and Prerequisites
This problem is due to a program error.
Solution
Option 1:
Import Support Package 14 and Support Package 16 in separate queues.
Option 2:
After the error mentioned above occurred, regenerate the enhancement spot
SFW_SWITCH_CHANGED in transaction SE18.
To do this proceed as follows:
1. Call transaction SE18.
2. Enter the enhancement spot SFW_SWITCH_CHANGED.
3. Choose "Display".
4. Choose the menu option "Enhancement Spot -> Activate".
You can now import the queue using the Support Package Manager

Org.apache.jasper.JasperException; JCO error when Importing SAP Roles in C

Hello experts,
I have installed BOXI 3.1 SP3, Integration kit SP2, BW/BI 7.0 and ECC 6.0 on Windows 2008/64bit.
My goal is to import the roles into CMS from SAP BW/BI but getting the follwoing errors:
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc
C:\Windows\SysWOW64\sapjcorfc.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform.
java.library.path [C:\Windows\SysWOW64\;D:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\]
org.apache.jasper.JasperException
I followed the note 1292144 - JCO error when Importing SAP Roles in CMC,but unfortunately without success.
I installed SAP JCo Release 2.1.9 (64bit)
Best regards
Lutz
Edited by: Lutz Heinrich on Aug 12, 2010 4:17 PM

Install the 32bit version of the Java connector. BOBJ is 32bit so even on 64bit Windows you need the 32bit version of the Java Connector.
Regards,
Stratos

Error when importing object P_lis

Hello Experts ,
I have a task assigned to me where i have to write a program to get all the reports and their variants( variants without space and non obselete variants)
When i am trying to access the variant SDCAS_ADRSEL , I am getting a dump "Error when importing object P_lis ". It has got only one variant JOJO1 in the vari table . Please help me out with this.

Hi Aditya,
You might need to provide a few more details on the dump.
I.e.
Exact details of the error that occured.
Where the error occurred
You can grab these out of the dump in ST22. That should help people out, to help understand what you are doing, as it's not really clear from your current description.
Cheers,
Katan

Exporting Prem Proj from AE gives an error when importing

Similar Messages

Maybe you are looking for