Exporting problem mac CS6

Hello-
I've been rendering and rerendering, reading options in forums and still am getting nowhere. I'm using CS6 on a Mac. Please help.....
Objective:
Export a high quality video file for Vimeo. I have read to use the h.264 codec, and that is what I've been using.
My imported footage:
720x540 @ 30fps square pixels, targa stacks from AE (progressive).
Premiere export settings:
720x540 @ 30fps, square pixels, progressive, h.264 codec, mV4, TV-NTSC, profile-high, level-4.1, render at max depth, VBR 2 pass- 10/20, keyframe dist-1, no multiplexer, max render quality, no frame blend
I can export the files (mV4 or mp4) but can't play them back in VLC, QT, etc. All I get when playing back is a message that says 'error'.  I can play it back in Premiere though. All software is updated. 
Question:
Should I be using a standard setting instead of my custom setting?
I read somewhere about re-scaling my footage at 90% and fitting it in a standard format, is this the best option?
Any ideas about what I'm doing wrong?
I'd like to preserve everything 'as is' if possible and create the highest quality video that I can upload to Vimeo.
Thanks in advance for any suggestions.....

Easiest one first:
bill501 wrote:
…Also, is there anyway to get rid of that canvas that's hiding my desktop?…
The only thing that has changed in this regard is that the Application Frame is now on by default.  You can turn it off in the Window menu of Photoshop.
As to the odd behavior of the document window, check your preferences to see what your settings are re "Zooms Resizes Windows".
If that doesn't help, you may have to trash your Photoshop preferernces by holding down Command Option Shift as you launch Photoshop until you see a box allowing you to delete your preferences.

Similar Messages

  • ProRes timeline/export on mac in Premiere CC

    I've posted about this earlier but thought it was worth another try. 
    Using Premiere CC on a Mac Pro (with Mountain Lion and Quadro 4000 Cuda card) - when in a ProRes timeline (whether it be 422 or LT), and trying to export to ProRes (whether "use preview files" is checked or not), Premiere consistently hangs on export whenever it hits a graphic file (tiff, psd, etc) or a Premiere generated title.  If I export into another format (h264, etc) - it exports fine (just takes awhile).
    In Premiere CS6, "use previews" never worked with ProRes, but you could still export to ProRes - it just didn't use the preview files.  Now with CC, you can't do either - at least not if you are using any graphics files or titles.  If you're just using video clips in the timeline, then it works fine (using previews or not).  I've tried this on 2 systems and have found other users on these boards as well as the Creative Cow forums that are experiencing the same issues.
    Being able to export with previews was perhaps the biggest reason I upgraded to CC, but instead I feel like its taken a step backwards (at least on a Mac in a ProRes environment). 
    Is anyone from Adobe listening??

    Since this is an export problem, you'll probably get more response on the AME forum. At the very least, staff members who visit that forum are more likely to know if this is a known issue.
    What are the dimensions of your still images and, for that matter, of the PPRO titles?
    If you have GPU acceleration enabled, please try encoding with it switched to Software-only (in Premiere; there's no switch for this in AME.)

  • Mac CS6 AAMEE and Deploystudio

    Hi all
    I am getting packages ready to deploy for the next semester and am having a problem with CS6. I am using the latest version of AAMEE to package up the various different versions I need. I am disabling the Adobe Air components and all seems to build OK. When it comes to deployment I am using Deploystudio to image and am adding the package to a workflow. The install fails and just sits seemingly forever saying "installer:PHASE:Running package scripts …installer%38.903333" (Picture athttp://www.flickr.com/photos/mikmac1/9266286395/). I have tried this as a postponed install, and not but it fails either way. I had the same problem last year but did not have time to troubleshoot it and ended up installing the package after install with ARD. I have seen a few people around various forums (fora) but no solution. I would like to resolve this issue before I have to move to AdobeCC.
    Regards
    Mik

    you need:
    Multicore Intel processor
    Mac OS X v10.7, v10.8, or v10.9
    2GB of RAM (8GB recommended)

  • PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

    Dear Adobe Community,
    I got my first imac a few days ago, and i decided to install Adobe CC.
    When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
    And I also have a problem with Premiere, when i want to export a project says that premiere must close.
    This is the try version, is this a problem of Adobe or Apple? i'm very worried
    Help!
    Thank you!
    Ivana

    Muchas gracias!!! Ha funcionado!
    El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
    Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
    created by Federico Platon in Foros de usuario a usuario - View the full discussion
    Confirma que se trata de una cuestión de permisos.
    Por cierto te aconsejos actualices la 9.1  a 9.2, posiblemente se habría arreglado así también.
    Bueno los pasos son:
    2. Select Go from the Finder Menu.
    3. Select Computer.
    4. Select Macintosh HD.
    5. Select Users.
    6. Select your user profile.
    7. Right click on user profile. Select Get Info.
    8. Go to bottom and unlock with admin password to make changes.
    9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
    10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
    Creo que no se necesita traducción.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Foros de usuario a usuario at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Hi Expert , crystal report export problem. system not responding

    Hi,
    crystal report export problem. system not responding.
    Thanks
    Rajkumar Gupta

    Dear Raj,
    Please try this
              Try
                Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
                Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
                Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
                Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
                Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                rptDoc.Load(rptPath)
                rptView.ShowExportButton = True
                rptView.ReportSource = rptDoc
                For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                    oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                Next
                For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                    For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                        If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                            oSubReport = rptObject
                            rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                            For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                                oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                            Next
                        End If
                    Next
                Next
                'Setting Paper
                Dim rawKind As Integer = 0
                Dim printSet As New System.Drawing.Printing.PrinterSettings
                For i As Integer = 0 To printSet.PaperSizes.Count - 1
                    If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                        rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                        Exit For
                    End If
                Next
                Dim MyTest As New SaveFileDialog
                rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
                rptDoc.ExportToStream(ExportFormatType.Excel)
                'rptDoc.SaveAs("C:\TBKING.xls", True)
                '''How to export the report
                Try
                    Dim CrExportOptions As ExportOptions
                    Dim CrDiskFileDestinationOptions As New _
                    DiskFileDestinationOptions()
                    Dim rename As String
                    rename = rptName.Replace(".rpt", "")
                    Dim CrFormatTypeOptions As New ExcelFormatOptions
                    CrDiskFileDestinationOptions.DiskFileName = _
                                                "c:\Report\" & rename & "_Export_File.xls"
                    CrExportOptions = rptDoc.ExportOptions
                    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = ExportFormatType.Excel
                        .DestinationOptions = CrDiskFileDestinationOptions
                        .FormatOptions = CrFormatTypeOptions
                    End With
                    rptDoc.Export()
                Catch ex As Exception
                    MsgBox(ex.ToString)
                End Try
                '' end by kevin shah
                rptView.Show()
                rptView.ShowExportButton = True
                Dim oFrm As New System.Windows.Forms.Form
                rptView.DisplayGroupTree = True
                rptView.Dock = System.Windows.Forms.DockStyle.Fill
                rptView.Location = New System.Drawing.Point(0, 0)
                oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
                oFrm.Controls.Add(rptView)
                oFrm.Name = "Report Viewer"
                oFrm.Text = "Report Viewer11"
                oFrm.ResumeLayout(True)
                oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
                oFrm.TopMost = True
                oFrm.ShowDialog()
            Catch ex As Exception
                objMain.objApplication.MessageBox(ex.Message)
            End Try
    By pressing this button XLS file be generated on C:\report\
    Hope this will resolved the issue
    Thanks
    Kevin

  • CS4 Audio Export Problem

    Hi
    I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
    Any help would be greatly appreciated.
    Thanks and regards
    Videoman 1
    SA

    Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
    Thanks to you all.
    Regards Paul ( Vryheid, South Africa )

  • Export Problem in LR 3.5

    Hi folks,
    I have been working with LR 2.7 for a while now and was happy with it.
    PC - Win XP - LR3.5
    Photo's stored on external hard disk (K:)
    The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
    I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
    The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
    I tried with a photo from an older folder of my usual camera and everything works fine there.
    The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
    Anybody any ideas to help me out?
    Thanks and grts
    Nil

    @ web-weaver:
    Of course they go to a different folder and they also get different
    titels/names once processed in LR. The originals are always RAW (NEF) and I
    export them as jpg or tiff files depending on what more I will do to them.
    @ ssprengel:
    I get the message when I have renamed the file in the export window, set
    the folder it has to go to and hit export.
    In the 2.7 version I got it already when I tried to import.
    As I said, this only happens with the Nikon (NEF) RAW files. With the
    Olympus (ORF) RAW files I have no problem at all and had no problem in LR
    2.7 either.
    I cannot see anything wrong in the Export panel nor in Preferences.
    Plug in is Metadata Wrangler and has been updated to the latest version >
    no joy...
    I tried import/export with jpg files and no problem there.
    Yesss! Got it! What I had overlooked was a question mark next to the folder
    in Library (sooo small). A rightclick and telling LR where it was solved
    the problem. Strange, though, as it has never done this before... the main
    folder and the path are still the same as the ones that work perfectly with
    Olympus exports... just a different subfolder named Nikon and another named
    Test... Also strange that if I started off with jpg, it was no problem
    either...
    Anyway, thanks a lot for shaking my senses for me
    Nil
    2011/12/10 web-weaver <[email protected]>
       Re: Export Problem in LR 3.5  created by web-weaver<http://forums.adobe.com/people/web-weaver>in
    Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4075999#4075999>

  • InDesign PDF Export Problem

    PDF Export in InDesign CS6 yields thin, light text. I need accurate rendering in pdf for hardcopy publication. Quality is imperative. Can you please help?  I use Creative Cloud applications.

    If you are using Acrobat or Reader try toggling Enhance Thin Lines and/or Smooth Line Art in the preferences

  • Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?

    Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?
    When I export a PDF from InDesign CS6 with specific margins, Acrobat does not recognize the Art box. (I have PitStop Pro 11 for page box view)

    Thanks Steve,
    We are exporting PDF's as you indicate. I see the same thing. The boxes are all the size of the original InDesign document. The PDF art box should be predicated by the margins in InDesign. When we had CS3, this worked great. Now, it seems that there is a disconnect between the two Adobe products honoring the page box size. I have contacted the Adobe techs via chat, and they had no clue what I was referring to. I find it mystifying that Acrobat can not interpret the art box set in InDesign as margins.

  • Export problems- it's renaming my MOVs to strange things and they're huge!

    Hey guys,
    strange fcp export problem. I have a 10 minute anim compressed fcp project, 1920x1080, 30fps on a top-of-the-range macbook pro with external terabyte HD. I did a test export a couple of days ago, because our deadline is really soon, and that all worked fine - a 10 minute quicktime, 100% anim codec, was 26GB. That was fine. I did another test clip, just a spinning bitmap for 10 mins, from AfterEffects with similar, succesful, results and file sizes.
    Now, however, when I export, it comes out as 60GB, and FCP changes the filename to something which is the first half of the filename I chose, and a strange number for the second half which is different each time I try it. Something like "filena#CF342.mov", for example. This file seems to have video in it OK, but it's 3 times the size, and the data rate is much higher, too high to play back.
    The only changes I've made since my successful test are replacing many of the low res previews with hi res versions, and adding 1 minute to the end. And I changed my QMaster setup, not sure if that's anything to do with it.
    Anyone got any ideas? I'm getting pretty worried.....
    thanks in advance....

    Thanks for the quick reply! No, don't think that's the problem. The new render doesn't have an alpha channel - it's Animation 100% Millions (not Millions+), and I don't think that would add more than 25% to the file size anyway. It also wouldn't account for the strange renaming of filenames. And the increase in length is only 10%. The file size has tripled!
    The final delivery format was going to be animation, 1920x280, because it's going to projected on a 30m wide cinema screen and live TV tomorrow night but our playback solution (while it handles the test files ok) can't handle the data rate of these strange new files: it's 800mb/s, which is pretty ridiculous.
    The renaming of the files suggests (to me at least) some kind of bug/error, but it doesn't report any kinda error in either fcp or quicktime.
    Plan B is to recompress the strange big file using h264 which gives an ok quality and is 10% of the size. Reason I'd like to do it animation is I need to do several versions with different gamma, so I need to do further processing on the rendered file after it's dumped from FCP.
    Any thoughts? I'd like to get to the bottom of this.
    one thought - I didn't tick "recompress all files" and some of the source DOES have alpha - would it be taking the alpha channel even though I didn't ask for it?

  • Export Problem Solved (new problem)

    I had posted earlier about export problem it was a silly mistake as i had kept hide extention on dats y it happened
    Now problem is when i export the exported video has some pixcels and it hangs in between dunno wats wrong

    What's a pixcel?
    Pixel?
    All video has pixels.
    Seriously, your question is completely incomprehensible.

  • I am having the following problems with CS6 *NOT CREATIVE CLOUD*

    So I purchased an upgrade for CS5 to CS6 and I did NOT purchase the Creative Cloud Option. I am having this host of problems:
    • Illustrator CS6 Crashes on Quit
    • Once launched Illustrator CS6 refuses to open new and existing documents unless I quit and restart.
    • Once Illustrator CS6 is launched and managed to open an new document, Illustrator CS6 refuses to import a link into a new or existing document unless I quit and restart.
    • From time to time, Illustrator CS6 will refuse to copy and paste from one document to another or within the same document until I quit and restart.
    • Illustrator CS6 ignores all my UI preferences. This happens every time I restart. This never happened with CS5 when I was running it and I am seriously considering going back to CS5
    Has anyone else experienced these problems as well?
    I am running my CS6 on OS X 10.9.5, 2.6Ghz Intel Core i7 with 16gb 1600 MHz DDR3 MacBook Pro.
    Please help.. there are only so many crash reports I am willing to fill out and send to no one because I get no response.

    Sounds like permission problems to me. Go to HD/Users/<yourname>/Library/Application Support/Adobe Illustrator CS6 and do a Get Info on that folder. Make sure that the permissions are set for Read/Write for you.

  • White line appears on jpeg export in indesign CS6? How to get rid of the same?

    White line appears on jpeg export in indesign CS6? How to get rid of the same?

    Please find attached actual jpeg and the screen shot of settings at which the jpeg is exported.

  • Mac CS6 Sympathy Card Template

    I want to create a sympathy card using Mac CS6 containing a small collage of photos. I would like to find a suitable CS6 to use as a starting point. Anyone have advice on where to download one?
    Thanks
    Mike

    Your printer should need only one card in the correct proportions. He will do the layout for printing.
    For the guidelines, Show Layout and Rulers and then click in the ruler and hold as you drag out the guideline.
    Walt

  • CS4 Export Problem

    I have an external hard drive to which I export my encoded CS4 video files once I have finished editing.  The problem is that, in doing so, space seems to be used also on my C drive.  I need to find and delete these files on my C drive once my PP project files are rendered to my external drive.  I have looked in temp files but they not there.  Can anyone advise me on this?

    That's done it S.V.  Many thanks!
    Lewis B.
    Date: Mon, 13 Sep 2010 11:13:53 -0600
    From: [email protected]
    To: [email protected]
    Subject: CS4 Export Problem
    I'm a newbie so don't take my word as gospel buuuuttt....
    If you're using Vista you might be making the same mistake as me. Go edit>preferences>media, hover the mouse over the media cache files location (i.e. C:\yadayada) and TYPE that into the bar at the top of the my computer. Don't click through and try and find it, TYPE it like you would an internet address in a web browser.
    Silly Vista.
    >

Maybe you are looking for