Exporting Problems In Adobe Premiere CS 3
In Adobe Premiere CS 3 When I Export Video In Microsoft Avi With Video Compressor some codecs work like Wmv,Cinepack,Indeo 5.10 but the following Video codecs don't work properly They are as follows:
ffd video show
DivX
xvid
Mpeg 1 & 2 video
The only codecs mentioned above have problems as when i export videos the video gets choppy and gray and ffd video show even fails to compile this have been happening from the time the first adobe Premiere Version was released but now I thought to use it again as I thought that Adobe may have rectified the problems in Adobe Premiere Cs3 Can Any one help me to solve this problem...I am also using codec pack name K-lite 4.1.7 but the problem of this is not caused by the codec pack...too.So I need your suggestions...
Is this what you meant? im still stuck as to why the sequence is too zoomed in, I also saw that the codecs for the Video were not installed. So i downloaded K-lite codec pack and still doesnt work.
I appreciate your help
Similar Messages
-
Help! Exporting problem in Adobe Premiere & Media Encoder
Hi guys,
I have a problem for which I did not find any solution on the web. I am not a very experienced Premiere Pro user. Maybe you can help me!
I made a project using Adobe Premiere Pro.
It has only one Sequence, but I have multiple clips which I want to export in that sequence as separate videos (see video 1, video 2, video 3 in the image)
The problem is that when I open Adobe Media Encoder, I open the sequence and I export all the different clips, exported videos do not keep all the Effects that I've applied to the video (contrast and brightness adjustments, other different image adjustments / effects etc).
So, I can automatically export all the videos with Media Encoder, but with no color corrections or other adjustments. When I play the Sequence in premiere it all looks good. When I export all the videos using Media Encoder, they do not have any effects applied.
If I export the sequence directly in premiere as a long video, it keeps the effects, but I get only one single video, and I need all of them exported separately.
The only way it works is making different sequence manually and exporting each one at a time. But I have 200 of them. So it will take a lifetime
I assume there is a smarter way to do it.
Did it happen to you? Is it something that I don't do right?
What should I do to keep all the Effects that I apply when exporting from Media Encoder?
Is there another method which I could use to correctly export all the 200 videos in that sequence besides doing it manually?
Thank you!Did you happen to select clips from the Project panel in Premiere Pro and queue to AME? Can you export a timeline correctly (select a timeline > File menu > Export > Media > Click "Queue")? Effects are applied only on clips in timeline and not on media clips under the Project panel.
-
Problem with Adobe Premiere Elements 11
Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors. -
Problem with adobe premiere CS5 file not responding
I have a problem with Adobe Premiere software, some time ago I was given a file in Adobe Premiere project contains a hard drive to my revision. but when i try to do the project on my computer I was often faced with the problem of not responding. What should I do with this constraint. Thank you.
I would suggest your first action to be logging this question on the user forum for Adobe Premier, not this one for Adobe Captivate.
Try here... -
Problem with Adobe Premiere Elements 10 : error DW046
Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your helpAT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
Re: problem with Adobe Premiere Elements 10 : error DW046
created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Problem with Adobe Premiere Elements 12 using Scary Halloween template
I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme. My problem is the red line is default to Scenes. I would like it to default to Play. How can I do that? Is it a bug?
Side Note: Other template default to Play Movie
Thanksjeffrey caban
No bug. Just the way the .psd for the Scary Halloween template was put together.
You are going to have to get into the .psd for the Scary Halloween template and rearrange the
Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
do that.
You want the order of the Layer Sets to look like
That is what worked for me just now to get the disc menu Preview to open to the main
menu with the red highlight under Play.
We will be watching for your reply.
ATR -
Problem with Adobe Premiere pro cs3 3.0
Hello there! I have this odd new problem in adobe premiere cs3 that i havent encountered before and ive tried to solve it but cant =/
If i import a picture into the project it lies there like it should ready to be dragged onto the timeline, the problem is the preview of the picture and the screen when i drag it into the timeline is black.. i cannot get the picture to appear as it just keeps being black, ive tried diff sizes of pictures, the only pictures that ive found that works so far are the windows example ones..
Answers Asap are appriciated, its a wedding movie and has to be done by tommorow night..Can you download and install G-SPOT and run those problem files through it. Tell us what G-Spot tells you. That article, that John T. linked to, should have some details on G-Spot, IIRC.
It is likely that the CODEC is not one that is properly installed, or one that PrPro can use to edit. The good things about VLC Player is that it's free, good and carries most of its own CODEC's. The bad thing is that playing an AV file is not the same as editing that same file, and so a test in VLC will only tell you so much.
This ARTICLE will give you some background on CODEC's.
Good luck,
Hunt -
Why don't I have the DCP export option in Adobe Premiere Pro?
Why don't I have the DCP export option in Adobe Premiere Pro?
Premiere Pro CC v7.2.2I will reply to my own question!
I was on my Windows machine when I began producing my video. During Export, I wasn't able to package it. After a few hours of research I found that Wraptor DCP is not supported (yet) on Windows platforms. I switched over to my Macbook Pro and viola!
DCP'ing all day long now! -
Color on exported video on Adobe Premiere Pro Is a bit off from the original source video
I have both Cyberlink powerdirector 10.0 and Adobe Premiere Pro C6
I noticed that adobe premere cs6. when exporting the video.. colors are a little off.. never matching the same tones as the original
source
i took a screenshot so you can see what i mean.. Notice Adobe is a a little mor orange. is there a way to fix this? Cyberlink powedirector always matches the source color when you export it. except Adobe Premiere Pro CS 6
i have windows 7 64 bit (Nvidia GeForce GTX 670MThanks for answering. I ddi notice different media players show colors different. But on the screenshot i just showed you.. all 3 are from the same media player.
For some reason everytime i export a video from Adobe premiere pro the color is never the same as the source on media player. I tried it on 4 different videos. Other software programs like cyberlink power director export the video with no color change.
1)The original source from the picture is a mpeg-4 (avc)
2)i always use wmv codec to encode all videos. So the shot from Premiere Pro was using WMV codec. and the other shot (cyberlink powerdirector) was also wmv to encde.
3) I even tried to see if maybe i used a different video format to encode it would fix the slight color change. like h264 and mov.. but nope still same issue
4) I did what you told me to show the source and exported video on Adobe Premiere and really weird. the exporterd video from Adobe Premiere now shows the exact color as the source.. but the exported video from Cyberlinkpowerdirector shows the color a bit different.
Heres the media codec information
Original Souce Video
General
Complete name : C:\Users\User\Downloads\meh_1280x720.mp4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 358 MiB
Duration : 9mn 39s
Overall bit rate : 5 178 Kbps
Encoded date : UTC 2012-08-15 09:47:22
Tagged date : UTC 2012-09-19 02:29:56
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 9mn 39s
Bit rate : 4 918 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.223
Stream size : 340 MiB (95%)
Language : English
Encoded date : UTC 2012-08-15 09:47:21
Tagged date : UTC 2012-08-15 09:47:45
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 9mn 39s
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 17.7 MiB (5%)
Language : English
Encoded date : UTC 2012-08-15 09:47:21
Tagged date : UTC 2012-08-15 09:47:45
Codec Infomation after encoding video on Adobe premiere pro (WMV)
General
Complete name : C:\Users\User\Documents\Adobe\Premiere Pro\6.0\testmeg_1280x720.mp4.wmv
Format : Windows Media
File size : 498 MiB
Duration : 9mn 39s
Overall bit rate mode : Constant
Overall bit rate : 7 205 Kbps
Maximum Overall bit rate : 10.1 Mbps
Encoded date : UTC 2012-09-18 23:11:30.285
Video
ID : 1
Format : VC-1
Format profile : MP@HL
Codec ID : WMV3
Codec ID/Info : Windows Media Video 9
Codec ID/Hint : WMV3
Description of the codec : Windows Media Video 9 - Professional
Duration : 9mn 39s
Bit rate mode : Constant
Bit rate : 10 000 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 24.000 fps
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.452
Stream size : 691 MiB
Language : English (US)
NumberOfFrames : 13907
Codec information for exported video on Cyberlink Power Director
General
Complete name : C:\Users\User\Documents\Produce_251.wmv
Format : Windows Media
File size : 419 MiB
Duration : 9mn 39s
Overall bit rate mode : Constant
Overall bit rate : 6 055 Kbps
Maximum Overall bit rate : 6 371 Kbps
Encoded date : UTC 2012-09-18 22:45:31.348
Video
ID : 2
Format : VC-1
Format profile : MP@HL
Codec ID : WMV3
Codec ID/Info : Windows Media Video 9
Codec ID/Hint : WMV3
Description of the codec : Windows Media Video 9 - Professional
Duration : 9mn 39s
Bit rate mode : Constant
Bit rate : 6 000 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.217
Stream size : 415 MiB (99%)
Language : English
NumberOfFrames : 17366
Audio
ID : 1
Format : WMA
Format version : Version 2
Codec ID : 161
Codec ID/Info : Windows Media Audio
Description of the codec : Windows Media Audio 9.2 - 320 kbps, 44 kHz, stereo (A/V) 1-pass CBR
Duration : 9mn 39s
Bit rate mode : Constant
Bit rate : 320 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Stream size : 22.1 MiB (5%)
Language : English -
having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner. losing my work constantly cause of freezes and crashes.
sunchick116
Thanks for the reply.
Anytime I am getting too far ahead, then let me know and we can work together on putting the essentials together for this troubleshooting.
From your screenshot, you have a Windows 7 apparently 64 bit computer, lots of RAM. That computer would be great for Premiere Elements 11 Windows.
But Premiere Elements 8 is only a 32 bit application running in the 32 bit compatibility mode of your 64 bit system. So all that RAM is excessive in a 32 bit system with its limitation of max supported installed RAM being 4 GB (of which 3 GB or less of that are available).
So, the freezing and such could be explained by limited resources depending how much you have in the project when the freezing occurs and what formats are involved - like AVCHD. The burner not being recognized by Premiere Elements is probably another matter.
Let us start here....another place where you could be getting hit on the resource side of things....
1. Background Rendering and AutoAnalzyer features in version 8 are notorious for grabbing system resources. If you have them enabled, that could account for much of the program freezing. So, please make sure they are not selected.
a. Background Rendering. In the Premiere Elements 8 workspace, go to Edit Menu/Preferences/General, and make sure there is no check mark next to Background Rendering option.
b. AutoAnalzyer. In the Premiere Elements workspace, click on the Organizer tab in the row below the selected Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and uncheck all the option under that.
To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace go to File Menu/Exit.
For most of us, Premiere Elements 8 was unusable without the 8.0.1 Update. Did you install that? Have you ever worked successfully with your Premiere Elements 8 on the computer where it is now? And, was that with or without the 8.0.1 Update?
Let us stop here and see how we are doing.
Lots of other factors to get into including the burner recognition one.
Thanks for looking at the troubleshooting comments.
ATR -
Missing all export options in Adobe Premiere (can only export to final cut pro xml). Where are the options?
There never was a trial version of FCP7. The application was only ever sold as part of the Final Cut Studio suite of applications. You might still find copies on eBay.
-
I'm having a number of problems with Elements 13. One is that, while in "play" mode, the sound will just stop happening. I have to click "pause" then "go" again and the sound comes back. It also stops playing on it's own, I have to hit "play" repeatedly. Just got the software, have been using it extensively for a week or two, and this just started happening.dor
Now today, when I add text to a clip, it drops out of "auto color" while the text is visible in the clip, then back into auto color when the text is gone. Any suggestiosn?nikovichb
If we are looking at the same thing, you have called attention to one strange Premiere Elements 13 AutoColor/Titler interaction. This can be reproduced in the Expert or
the Quick workspace. I will demo this in the Quick workspace since that is where you have been working.
1. Import a still into the Quick workspace/Filmstrip.
2. With the still selected, go to Adjust Tab/Adjustments Palette/Color Panel expanded and just click on the Auto Color Tab. Close the Adjust Tab route.
3. Go to Text Menu/New Text/Default Text to open the project's Titler. When you do that you see the following and not the still over which the text title is to go.
And when you close the Titler, you then see the "Add Text" text title in the still.
The only solution that I can think of at this time is to create the text title and then apply the Auto Color to the still.
It is interesting that this only happens with the Auto Color in the Color Panel selected. If you do not click on
Color Panel and use the More options for Color adjustments, this behavior does not take place.
Deletion of Adobe Premiere Elements Prefs file does not correct this situation.
As for
I'm having a number of problems with Elements 13. One is that, while in "play" mode, the sound will just stop happening. I have to click "pause" then "go" again and the sound comes back. It also stops playing on it's own, I have to hit "play" repeatedly. Just got the software, have been using it extensively for a week or two, and this just started happening.dor
I think that here we need to explore project settings (project presets), properties of source media, and Timeline rendered and unrendered content prior to export.
Please review the above
a. verify if the Auto Color Text Title glitch that I saw is what you described in your situation
b. give the details of your project so that we can explore cause and effect for Timeline content playback irregularities as seen in the Edit area monitor.
Thanks.
ATR -
EASY WAY TO EXPORT PROJECT FOR ADOBE PREMIERE C4
Does anyone have another solution to export your video project from Adobe Premiere C4 other than going through Adobe Media Encoder and DVD.
We're looking for something as Simple as it was for Premiere Pro 2, export movie, AVI, then you had a quick and easy way to use the file in
many ways. It seems encore and Media Encoder has too many issues and take too long.
HELP.
Ernie Sigmon [email protected]If you're having a specific problem with the Adobe Media Encoder, you can try asking in it's forum.
http://forums.adobe.com/community/ame -
Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)
Hello
We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
Dennis
(Workstation: Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0) )
Mediainfo of the P2-Cards:
General
Complete name : \CONTENTS\VIDEO\0068T7.MXF
Format : MXF
Format profile : OP-Atom
Format settings : Closed / Complete
File size : 3.92 GiB
Duration : 2mn 28s
Overall bit rate : 227 Mbps
Encoded date : 2014-10-15 13:33:41.000
Writing application : Panasonic P2 2.0
Writing library : Panasonic P2 2.0
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High 4:2:[email protected]
Format settings, CABAC : No
Format settings, GOP : N=1
Format settings, wrapping mode : Clip
Codec ID : 0D01030102106002-0401020201323104
Duration : 2mn 28s
Bit rate : 227 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 50.000 fps
Standard : Component
Color space : YUV
Chroma subsampling : 4:2:2
Bit depth : 10 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 2.193
Stream size : 3.92 GiB (100%)
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Mediainfo Audio-Datei P2-Card:
General
Complete name : \CONTENTS\AUDIO\0068T700.MXF
Format : MXF
Format profile : OP-Atom
Format settings : Closed / Complete
File size : 13.6 MiB
Duration : 2mn 28s
Overall bit rate mode : Constant
Overall bit rate : 770 Kbps
Encoded date : 2014-10-15 13:33:41.000
Writing application : Panasonic P2 2.0
Writing library : Panasonic P2 2.0
Audio
ID : 3
Format : PCM
Format settings, Endianness : Little
Format settings, wrapping mode : Clip (AES)
Codec ID : 0D01030102060400
Duration : 2mn 28s
Bit rate mode : Constant
Bit rate : 768 Kbps
Channel(s) : 1 channel
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 13.6 MiB (100%)Hi,
we have the same problem!
It is not possible to play audio with the AVC-Intra100 Codec fluently.
Can anybody help?
Thanks,
Anja -
Another crash problem with Adobe Premiere Elements 4
another crash question! burned a dvd of project, saw something i needed to change as i watched the dvd, tried to get back into project, but crashed time and time again. have tried any and all suggestions in the forum for other crash problems, but cannot fix. can anyone help? below is error message and my equipment. using Windows Vista. I want to go back to Windows XP, never had a problem. thanks to anyone who has an idea.
Problem event name: APPCRASH
Application name: Adobe Premiere Elements.exe
Application version: 4.0.0.0
DEll XPS 420
Intel (R) core (TM)2
Quad CPU Q9450 @ 2.66GHz
4.0 GB
32 bit
Driver software: ACPIx86 based PC
Adapter ATI Radeon HD 3650I'm not sure what's up at this point, if doing a Save As and deleting your render files doesn't fix your glitch (and assuming you've got adequate, freshly defragmented room on your drives for the program to work).
You can also try working through Adobe's troubleshooting steps:
http://kb2.adobe.com/cps/514/cpsid_51427.html
Renaming the presets folder can help. (The program will automatically make a new one when you next launch it):
Windows XP:
Documents and Settings/[username]/Application Data/ Adobe/Premiere Elements/8.0/MediaIO/Presets/OTHERS
Documents and Settings/[username]/Application Data/ Adobe/Premiere Elements/8.0/Settings/Custom
Windows Vista:
Users/[Username]/AppData/Roaming/Adobe/Premiere Elements/8.0/SC/Presets
Maybe you are looking for
-
I brought my ThinkPads T400 one year ago. In this year, I brought Window 7 and installed in my laptop. After I installed all the drivers for the laptop. I can only use 2.99 GB memory out of 4GB. What is the problem? Do everyone knows? (Everything wor
-
Error Message while assigning resource to work orders
Hi All, We have the MRS tool integration with service work orders for scheduling. When we assign the resources with 9 hours as duration there is no error. When we allocate more than 9 hours for some resources, not all, we receive the error message as
-
App Not Launching, Problem Reported, Dev (F84Games) Not Responding, Refund?
Hi all, I really need help with the 'Railroad Madness' app purchased for my son's ipad (from F84Games in Los Angeles). When he tried to play/launch it the game just crashes immediately after the splash screen. Reporting the problem to Apple (through
-
Hi All Another interesting scenario for which I cant find many answers on SDN. How to track cost savings in standard SAP? Example: A company buys a material for $10 ea. General market price is $11 so its a saving of $1 per item. Every time a user pla
-
[svn:fx-trunk] 6196: ASDoc bug fixes for l10n
Revision: 6196 Author: [email protected] Date: 2009-04-22 10:59:05 -0700 (Wed, 22 Apr 2009) Log Message: