Exporting QT file with multiple audio tracks

I'm trying to create a digibeta tape of my movie. The company who does it wanted a QuickTime file with the movie where there were 2 audio tracks (4 in sterio). One with the music and sound effects and another with narration and interviews. I'm not sure if this is possible or where to set the option for this. Can anyone help?

Command+0 (zero) to bring up Sequence Settings, go to the Audio Outputs tab and change the Outputs to 4 whilst keeping the Grouping as Stereo.
Back on the timeline, ensure your audio media is on the correct audio track for export, eg, all music on 7&8 , 9&10, VO on 5 and/or 6 , etc etc. Basically, keeping an organised timeline without spreading audio over random tracks really helps.
Ensure the audio tracks are assigned to the correct channels. To do this, on the timeline you see the 'destination buttons' A1 A2 A3 A4 A5 A6 etc etc... next to each button is a padlock, then you have the Toggle Auto Select icon. Control-click on this icon and you'll see the Audio Outputs setting, which shows which stereo pair that particular track is assigned to. In this case, you'll want to assign Music and Effects to 3&4, whilst keeping narration and interviews on 1&2.
Export Quicktime Movie.

Similar Messages

Export to Quicktime with multiple Audio Tracks?

Hi all --
I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
Can anyone help?
Thanks!

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Can you export a Quicktime with multiple audio tracks?

I have a video with split audio tracks.
I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
have they just not been integrated yet?

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

No audio on files with multiple audio tracks

All my files that have multiple audio tracks (e.g. stereo and surround) no longer have audio when I initially start up my Apple TV 2. When I manually change the audio track in the menu (from stereo to surround or vice versa), I get the sound back but I would have to do this with every single file and do this each time I start up my Apple TV. Anyone else notice this problem. This only started happening after the most recent update.

Hi,
AC'97 Audio for Vista/Win7 here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

.ts-files with multiple audio tracks / Premiere Elements 12

Hello forum,
once more I need a little help please.
I've created successfully a few DVD's, and by now I'm a master in creating my own menue templates , but now I have again some problems.
I imported a .ts file which I recorded on my Sat Receiver. This file contains a video track and 2 audio tracks:
1. German 6-channel AC3,
2. English 2-channel AC3 (I can add a screenshot of the file info's if needed).
Now my problem is that I only hear some kind of background sound, music and so on, no voices. So not really one of the tracks I mentioned above.
The file works good when I play them with VLC player, and I'm able to chose the 2 languages there.
What I don't really understand is, I created several DVD's with exactly the same file type, I mean the file info's are identical except the lenght differs for a few minutes.
Is there a way to chose the audio track in Premiere Elements like I can chose it in VLC player? Or is there another way to bring the voices in there?
Thanks in advance,
Jessie
My system is a Macbook Pro, 16 GB RAM, 2.5 Ghz, Premiere Elements 12

Hi ATR,
yes, that's what I meant. It worked without problems with a lot of files in different projects. I made a few screenshots, maybe they help to get it fixed.
This is the file that worked fine:
And this is the one that doesn't work:
By now I haven't changed anything in the settings as I don't know what I could change.
The files that worked came out with the german soundtrack, so I assume 5.1 channel.
I'm really out of ideas now :/
Jess

Exporting a project with multiple audio tracks changes the loudness level regardless of export format

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
After a bit of troubleshooting I found a workaround. I mixdown all of the tracks in adobe audtion to one track and then imported it into premeire.
Once I did this the audio loudness was not changed after exporting.
Workflow for when it didn't work.
I used edit in adobe audtion for the audio tracks from premiere.
Matched the audio to the loudness level I wanted, and then saved each track.
Export from premiere.
To Check Audio Loudness
Bring in exported file into new premiere project
Edit the audio in adobe audtion.
Drag the audio file into match audio to check loudness level.
I am using
Adobe Premiere Pro CC v8.1
Windows 7 on PC
Please fix this adobe.

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
I have never experienced that or had any need for a work around.
What did your Broadcast Quality Control pick up on?
Audio Levels and Loudness are two different things in this regard.

Working with multiple audio tracks

Hello,
I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
BTW I'm working in FCP 7.
Thanks,
Thien

One way:
Lock the video track.
Use the Edit Selection Tool to Select the audio transition points
This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
which gives me the displacement of all the tracks that I wanted:
You can use this quite quickly once you get used to it.
MtD

QT H.264 files with two audio tracks. Quicktime plays 2nd track first. ***?

I've been experimenting with H.264 (AVC) and my DVDs. Using Handbrake, I ripped a DVD to MP4 (H.264) and including the director's commentary as the second track.
When I play the MP4 with Quicktime Player, it plays the director's commentary instead of the main soundtrack. VLC, however, correctly plays the first track (main movie audio track) and it allows me to select the second track via a menu.
To get Quicktime to play the proper track, I have to open "Movie Properties" and manually uncheck the second track. This was never a problem with DivX/XviD encoded files with two audio tracks; Quicktime Player correctly played the first track.
Why does Quicktime ignore the first audio track in MP4s (but not AVIs) and is there a way to correct this?

I do have QT Pro.
H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

Export QuickTime file with new audio and maintain the file size and quality as the original.

I shot some footage for a client yesterday and ran into an issue. To make a long story short I have QuickTime mov files shot with my Panasonic GH4 that have a buzzing sound in the audio track. I have clean audio from a recorder that can be sync'd. Is there a way for me to do this for the client and deliver them as the same QuickTime file but with the clean audio and keep the file size close to the original and not have quality loss in the image?
If so I will probably put all of the spanned clips together from each interview and sync the audio before delivery. I am just not sure which codec will give the client the same quality footage compared to the originals and not have a massive difference in the overall file size. They did request that they be Quicktime MOV files though so that is a must.
I don't see this as an option in the codecs in the export settings in PP, but is there a way to export as ProRes or another MAC native codec that will save them from having to convert it on their end? I am on a PC with Adobe CS5.5 so I am not too familiar with MACs, but from what I understand they would need to convert the files if I sent them straight out of the camera.
I found some related search results for this but they pertained to "Best quality" for export. I am not sure how the varying options work but I don't want to create files that are considerably larger, just not less quality.
If anyone has experience with this it would be greatly appreciated.
Thanks,
Cole

Here's the workflow: I imported the video footage into iMovie '08 and did my edits. Then I exported it (share) to my desktop with compression set @ 740 X 480. Then I used QuickTime Pro to fix the audio track. The file plays perfectly with both audio tracks working. It's a QuickTime file (.mov).
I hope this jars any replies as to why the file when uploaded to my iWeb gallery drops the second audio track.
Hmm,
Jack

Issues with multiple audio tracks

Hello everyone. I need some help with my DVD Reel. … Please
I have a DVDSP project that I’ve been using and updating for the last year. It contains over 100 small 4-minute clips (Mpeg-2 Video + AC3 Audio) plus a lot of menus and buttons….
Everything worked nice and perfect… except that I added some surround clips last week (using stories)… so now I have one audio track (A1) with all stereo audio and a second audio track (A2) with my surround audio. Again, no problems until today when I used the same track to add a new clip with stereo audio only (A1)…. And it doesn’t want to playback on DVD Player (but it plays in the simulator)…
…. Now here is the question. Does the additional (surround) audio track have anything to do with this problem or is there any other reason why the stereo clip didn’t want to play after the surround clip? … or Do I need to create stories for my stereo clips from now on?
Some more information: I’m using Final Cut Pro and Compressor to crate my media… Intel Mac OS X… DVD Studio Pro Version 4.1.2.
Thanks for your help
Adriana

Got an almost kind of (but not really) similar problem. I have videos with multiple audio (AAC and AC3 passthru) in an m4v file. the AAC is always defaulted with the "enable" tick in the properties box. I've tried almost everything I can think of to enable the AC3 track by default so that frontrow or QT will play it. but everytime I save (even save-as) it defaults back to the AAC stereo.
Any ideas? is this a "feature" of 7.5.5?

Help importing WMV files with 4 audio tracks....

Hello,
I am using a PC to run a robot show. The show runs off of WMV files recorded with 4 audio tracks.
The "front" audio tracks are the left and right chanels for sound.
The "rear" audio tracks are the signals the show runs off of.
(If you want to see the show... it's here http://www.yorkmiss.com/Curtains.wmv
I run the audio files using the windows media player and as you can see... it works fine.
However, I would like to use the I-tunes player since I can then controld the show remotely using my I-Touch.
The problem is that every time I import one of the audio file into I-tunes, it converts it to a new type of file that "blends" the front and rear chanels of audio together.
I've tried every different option in the import prefrences list - and they all have the same result.
Does anyone know a way of playing the files "as-is" without converting them, or is there a way of converting them I do not know about?
Here's an example of one of the files:
http://www.yorkmiss.com/ShowbizKylesmom_504.wma
Any help or suggestions would be welcome and appreciated!
Thanks in advance,
Beth

Yes, I understand that now... but is there a way to convert to those file types while still preserving the 4 seperate audio chanels?
Thanks, Beth

Video with Multiple Audio Tracks-- IOS 4.2 Removes Way to Select Them

After upgrading to IOS 4.2 on my iPhone 4, I've found it no longer lets me select from among multiple audio tracks. The option and button is completely gone.
I encode my videos with AC3 audio as the first track (for my home media devices), and stereo audio as the second track (for the iPhone). Now the iPhone will just play the video, with no audio, and no way to select another track. This is extremely frustrating as I've encoded all my DVDs this way, and never had any issue with playback like this on any IOS device going back to the first gen iPod Touch.
Anyone else have this issue, and know of a work around? Thanks!

I too have the exact same problem for the exact same reason. Did you ever figure out a workaround (other than reencoding all your videos)?

Creating Video with Multiple Audio Tracks?

Not sure if this is the right place to post this question but I figured its compression/video codec related so someone might have an idea...
I've used Handbrake in the past to rip a DVD with an audio commentary that allowed for multiple audio tracks that could be played back in iTunes/Quicktime (though not on the iPod Classic for some reason... perhaps someone knows the answer to this?)
I was just curious as to whether or not this was possible to do WITHOUT first making a DVD with an 2ndary track? I was hoping to record audio commentary for one of my shorts, and put it up on the web, but wanted to avoid the step of going to dvd first then ripping it.
is this achievable in compressor? do I need to use a third party app? thanks so much.

ehmjay wrote:
is there any app (be it from apple or a 3rd party tool) that will allow me to add a secondary audio track for switching in quicktime/iTunes? if so could you point me in the direction of it (or even instructions)
I'm afraid I'm unaware of anything - outside of HandBrake - that does encode a second track of audio. But I haven't exactly had my eyes open since I haven't needed to do this for a client yet.
handbrake mentinos that its able to rip secondary audio for use with iPod Classic/Apple TV... however so far it hasn't worked for me. Does this mean that while handbrake is doing it properly its just my iPod itself that's having the troubles (like I said that alt. audio is there in iTunes/Quicktime just not on the iPod itself)
I am pretty sure that the issue is that the software for iPod Classics - as is the case with AppleTV and, even, QT Player - which won't allow you to switch over to the other track. But I haven't had to work with the Classic in a while, perhaps there is a setting in Audio (or Video) that gives you the pop-up option you're seeking?

Can Premiere Pro CC handle AVI files with multiple audio streams?

I have an AVI file with two audio streams and I am wondering if there's any way to access the second stream in PP? So far I can only get the first stream to play. I know I can extract the second stream in for instance VirtualDub, but it would be nice to not have to do that in the interest of an effective workflow.

Hello again Jim! Thank you for your reply, you seem to be working hard here on the forums! The info I have found from 2011 suggested that it wasn't possible then, but I was hoping maybe they added this feature.

How do I export from FCP to a QuickTime file with multiple audio channels?

I'm delivering a project where the first step is to generate an HD Cam SR master, which I will be doing at a post-production lab. They will then do a QC check for me. To generate this HD Cam SR master, they need to me to bring in my 98-minute long movie on a firewire hard drive, in five equal parts -- QuickTime files. From these five QT files, the lab will then be creating an HD Cam SR master that will have...
dialogue on tracks 1 and 2
effects on tracks 3 and 4
music on tracks 5 and 6
MY QUESTION
a) I don't see any way to separate these audio tracks accordingly in the FCP menu for QuickTime export. Does anyone have any experience doing this?
b) And does anyone know the most efficient way to combine timeline audio tracks for this purpose? I have my dialogue sitting on the first FOUR audio tracks, actually. To deliver this film, I'll need to crush these four audio tracks to two, as listed above. I could generate an AIFF file, I suppose, import it back onto the timeline, sync it up, and then re-export along with the visuals to make the final QT file, but this seems like a generation loss.
thanks,
Shanked
PS the movie is made up of footage from a Sony PMW EX1. I used the codec "XDCAM 1080 24p 35mbs VBR" for editing in FCP. I'll either export to QT using this same codec or switch to "Apple ProRes" if my machine can somehow maintain the sync.

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

Exporting QT file with multiple audio tracks

Similar Messages

Maybe you are looking for