Exporting QT with 6 individual aduio tracks

What is the procedure to export a quicktime with full quality 5.1 mix as the sound source? I want to maintain all 6 tracks as seperate channels within the QT. Is this something that is done through the sequence setting in the audio output tab? I don't want to mix or downmix anything. I simply just want my Quicktime to contain the 6 tracks of audio in their mixed form.
Thanks.
PowerMac G4 quicksilver 800mhz 1.25gig RAM Mac OS X (10.4.5) 20' Apple Studio Display

Where is the project going for final display?
DVD, Digibeta, the web, ipod or ... ?
x

Similar Messages

Export Video with Multiple Audio Tracks

I need to be able to export video with audio on multiple tracks. I have moved to CS6 from FCP 7 where this was rather easy to do. I can make a preset in AME with more than enough mono tracks but after the encode the video is always smashed to one mono track. I am not doing a 5.1 mix, there are different mic's on each track that need to remain independant of one another and mixing them down within Premiere is not feasable. Are there no options to just have the audio 'pass through' like Compressor? Sorry if there are other posts but I have been searching forever and can not find a simple answer on this topic.
Also, is there no way to have the source timecode burn in? Putting a filter on the video in a sequence is unacceptable, I am very displeased to find that this doesn's seem possible in AME or Premiere, it has been part of Apple's suite for years.
Example of my preset from Compressor:
Name: Apple ProRes 422 (Proxy)
Description: QuickTime movie with Apple ProRes 422 (Proxy) and audio pass-through
File Extension: mov
Estimated size: unknown
Audio: multi-track pass-through
Video Encoder
          Width: (100% of source)
          Height: (100% of source)
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: Apple ProRes 422 (Proxy)
          Multi-pass: Off, frame reorder: Off
          Automatic gamma correction
Progressive
          Pixel depth: 24
          Spatial quality: 50
          Min. Spatial quality: 0
          Temporal quality: 0
          Min. temporal quality: 0
Timecode Generator
          Position: Lower Right--Title Safe
          Alpha: 1.000
          Label: Source Timecode
          Start Timecode at 00:00:00:00 false
          Text Color: r:0.0000, g:0.0000, b:0.0000
          Font: Helvetica, 36

Hi James,
For exporting a multitrack .wav file, you have to start a project with a multichannel audiomaster (3-16 tracks).
Copy and paste your complete edit to the new editsetting.
Now in the audiomixer you can route your audiolayers to the multichannel you like.
(CH1+2 pan to left is channel 1, pan to right is channel 2 and for a stereo track pan to center : channel 1 for left and channel 2 for right.)
Then you export your project to a 3-16 tracks multitrack .wav file.
When you need mono tracks you can import your multitrack .wav file in premiere. Then send it to Audition (edit in Audition) and then adobe will convert the file into mono tracks.
You'll find the mono tracks in your audio capture folder or can premiere search for then by 'reveal in explorer'.
The multi track .wav file has got timecode within the file.
When exporting in QT you can also choose for a multitrack audio file. It also contains your timeline timecode.
.avi or .mp4 video files cannot be exported with more than 5.1 channels of audio
MXF OP1a in XDCAMHD can also be exported with max. 16 channels of audio. It also contains your timeline timecode.
Hopefully you can get further with Premiere Pro with this info.
Succes with it!!
gr. Mano

Exporting quicktime with 4 audio tracks for broadcast

Hi,
Does anyone know how to do this? i need to get a program out to a broadcast quicktime file with sync on 1&2 and M&E on 3&4, i have the sequence setup correctly as did a digi playout for the same thing which was fine. However, if i do 'export quicktime' with sequence settings i only get two audio chanels. If i go to quicktime conversion then all the drop down menus for multiple audio chanels are greyed out.
Any ideas?
Best,
GK

if i do 'export quicktime' with sequence settings i only get two audio chanels
how are up you assessing this? QT Player has only 2 playback channels and additional channels will be mixed down to those ... but if you press Cmd-J to open the movie properties you should see all 4 channels are there, or if you reimport your exported file back into FCP you'll see it contain the 4 audio tracks as exported ... if not then your export settings are not correct :/

Export EDL with 20 audio tracks

Hi all!
I´ve a sequence with 20 audio tracks (original files / stereo mixes / 5.1) that i have to export to a audio house via EDL.
The EDL limits my track export (total of four).
Any of you guys exported to PTools using XML?
I know that version HD 7.2 is capable of using this files... any experience?
Do you have other way of doing this, via fcp project (?) any tip?
Thank you all!
HBars

Hi Tallguy!
Thank you for your msg...
Yes, that´s my "fight" with the guy from audio house... he say AAF, i say OMF...!
I´ve 1hour 40min sequence and with omf i´ll have to separate all tracks (groups of two!), bah!
And what about XML...?
Thank you!
HBars

Exporting Quicktime with discreet audio tracks

How in FCP do you export a quicktime file with more than two channels of audio that are discreet?

Hi -
For FCP 7:
Click on your timeline.
Type Command - 0 (Zero) and click on the Audio Outputs Tab.
Change the number of outputs you want, and set the track pairs up as stereo or dual mono, as you want.
Click OK, a warning dialog box will come up that you can dismiss.
On the timeline, Option-Click on each audio track right below the auto-select toggle icon, and from the drop down menu, route the track to the desired output track.
When done, export the Quicktime movie.
The only way you will verify that all the tracks are there is to either open the exported quicktime in Quicktime pro and menu Window > Show Movie Properties. You'll see the additional tracks listed there -OR- just import the exported movie back into FCP and bring it up in the Viewer, you'll see all the audio tracks.
Make sure you restore your sequence back to two channel ouput, if you want, when you are done.
Hope this helps.

Can you export a Quicktime with multiple audio tracks?

I have a video with split audio tracks.
I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
have they just not been integrated yet?

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Can't export quicktime with 5.1 audio track - help

I have a very unusual problem that I am running into.
A festival has asked for a Pro Res Screener vs a DCP like I am used to with a 5.1 audio mix.
No problem I figure, I grab the 6 individual audio tracks from our sound guy, mastered as 5.1 L,R,C,LF,SL,SR.
I create a new sequence, lay in my Video track and the 6 audio tracks from track 1 - 6 in the same order as above.
I setup my sequence the first time to be a 5.1 sequence, with 5.1 tracks.
I set each track according to it's placement with the little 5.1 diagram in each track.
I export using pro res, and set the audio to 5.1, L,R,C,LF,SL,SR
I figure at this point all should be good. I bring the renderd file back into premiere to check the file and create a new sequence directly from the new file.
I get 1 video track with a 5.1 audio track.
This is where things get weird. There are 5 channels in the track, however the left and right tracks have a mixture of L,R,and C, there is no audio in the C track, no audio in the LF track, very slight audio in the SL track and no audio in the SR track.
What is going on?
I have tried exporting this now about 10 different ways. Figuring that the audio tracks were all mono tracks I tried to set them up as individual mono tracks 1-6 and I just end up with a 5.1 track that has mixed L,R and no audio in any of the different channels.
I've searched the web and I'm going crazy with this. i'm about to send the project off to have it digitally mastered by someone else. this is quite ridiculous.
Has anyone experienced this problem before? I figure I have to be setting up something wrong? but what? how come there are no 5.1 templates in premiere to work from?
Thanks in advance to anyone who can help. I really hate to send this project off to someone else for such a seemingly simple task. Seriously, this is making DCP creation like a walk in the park!

Richard, thank you so much for that link. That seems to have done the trick, at least 95%. I have successfully routed all tracks to a single 5.1 file that can now be successfully exported... however, even after following his invert track trick, I am still getting nothing in my LFE track. How on earth do you rout that LFE track? Has it changed in premiere CC 2014?

Why does iTunes show tracks that I've ripped from a single CD as individual tracks with individual albums all with the same album name?

I've looked all the data about each track in terms of album name and other seemingly relevant pieces of stuff, but whenever I look at my songs by albums, it still shows these tracks individually. It's like the same album is repeated over and over instead of the album appearing once with all the tracks listed beneath it.

Chip86 wrote:
EG. A CD upload has all of the tracks appearing as indivual alumbs. But as its not physically on the computer anymore I dont seem to be able to do anything about it. Is there away for me to access cloud and rectify this? or manage it from a device?
Thanks
You can edit the "metadata" of the tracks in the cloud just as you would if the tracks were physically on your computer. Hightlight the tracks of the album you want to edit, do a Get Info..., edit "metadata," click OK.

I want to export a video file with 6 mono track for surround sound and the 7th track to be stereo.

I want to give my friend a video file, so when he imports it into avid, premiere, final cut etc. he would recieve 6 mono tracks (L,R,C,LE,Ls,Rs) and the last one to be stereo. but every time i export it comes as 7 mono tracks. and in the setting thats the only option

i think you would have to go with 8 mono tracks, 6 for the 5.1 mix and 2 more for the stereo. that or try to use 4 stereo pairs, but that would combine parts of the 6 mono (5.1 mix).
The Video Road – Multichannel Audio in Premiere Pro

Export H264 pass-through movie with embedded text track QuickTime Pro 7 Windows?

Using QuickTime Pro 7 for Windows, I add a text track with closed captions to my H264 .mp4 videos.
The text track works great until I try to export it. After I've added the text track, the text track is displayed as long as the track is selected to be active using the Movie Inspector track GUI.
My movies are encoded as H264 for cross-platform compatibility, and need to remain in this format. The only way to save them in QuickTimePro 7 for Windows is to Export Movie to MPEG-4. I select Pass-Through mode to retain the resolution and bandwidth parameters that I initially encoded the video with.
Unfortunately, after I export to MPEG-4, the caption track is lost. It disappears. When I open the newly exported MPEG-4 caption file, and select Movie Inspector, the caption track is missing. Inspector only shows video and audio tracks.
If QuickTime Pro 7 for Windows correctly exported my text track with the video and audio tracks, then users would be able to view the closed captions upon playback in QuickTime Player by selecting View--> Show Closed Captioning (Ctrl+Alt+T).
Anyone been able to export to MPEG-4 pass-through movie with embedded text track QuickTime Pro 7 Windows?
Thank you!

Sorry here is the code
<body>
div id="myAlternativeContent"
a href="videofolder/video.mov"
img src="videofolder/video-poster.jpg"
/a
/div
</body>
videofolder/video
Message was edited by: SFlocation
Message was edited by: SFlocation

Export to Quicktime with multiple Audio Tracks?

Hi all --
I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
Can anyone help?
Thanks!

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Export MXF Op1a XDCAMHD with one stereo track?!

I need a MXF Op1a XDCAMHD with only one stereo track as a master file.
If i choose "stereo" in the export settings I always get two mono files.
I know, that it is not a standart in a MXF with XDCAM to use stereo, but
I know that there are some broadcaster out there who use such a file as master file.
Does anyone know how to create it? That would be very helpful.

That's right I checked the file in the VLC Player.
I exported an MXF IMX30 file and it worked with stereo file, in VLC as well!
I send the "stereo" MFX XDCAM to a broadcaster and he said it is not a MXF with a stereo track. So the same like I recognized after my export.
So it seems to be possible to export MXF's with stereo files, but not in XDCAM.
Does anyone use it? Or has a similar problem / workflow?!

Exporting 6 channel discrete mono tracks (5.1 mix) I only get 2 tracks with compressed audio and 4 empty track on my output.

Exporting 6 channel discrete mono tracks (5.1 mix) I only get 2 tracks with compressed audio and 4 empty track on my output. I'm using Premiere Pro CC14, sequence settings and export setting pasted below. Please help need to export feature trailer for iTunes release next week. Yikes!!!

Thanks for the notes. Im almost there but not quite. I create my sequence 5.1 like you said
then map the dots and LFE. But when I go export media is only give me the option of 1 track 5.1 not 6 discrete channels.
I check my settings and they LOOK right
then I go into my modify clip settings and I see the number of audio tracks as 1 so maybe thats why Im getting only 1 channel 5.1.
But when I select different settings in modify clip environment I can get it to LOOK correct to me
everything seems to be assigned correctly. But when I go back to export it only still gives me the same option of exporting with 5.1 as a single track.

Export animation with mp3 track to .mov file...movie sound tinny, hollow with a little reverb. How to fix?

I'm exporting a 1 minute piece of animation with a great mp3 sound track to a .mov file. The .mov file's sound track is tinny, hollow with some reverb. I've used most high quality quicktime setting and all exports versions were not good. I using FlashCS6 and am on a iMac using OSX 10.9.5. I have also converted the mp3 to a .wav and aiff file and exported both with the animation with the same results. Any help help or workaround to solve this problem would be greatly appreciated. Thanks in advance.

Thanks for the info Rob. The sound plays fine in Flash. The export settings are: 16-bit stereo 44.100kHz H264. Could the video H264 compression be the problem? Without the H64 compression the video triples in size. Something I'm trying to avoid. I will give no audio compression a try.

Export MXF with multiple audio channels for broadcast

Hi,
I work at a broadcast company as an editor. We always used FCP with the free sony xdcam plugin to export. This plugin seems to be one of the rare ways to export an MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.
Since our workload has grown enormously the last few months and it will only become more we are optimizing our workflow. We also work with a lot of different endboards in After Effects and we made a nice template to work with. And since AE and Premiere can make a dynamic link we are considering changing from FCP to Premiere.
Now comes the question!: The only obstacle we could not find an answer to is exporting it with 4 audio channels as an MXF from Premiere CS5. Will there be some development on this level regarding CS6?
A solution to this should save us a lot of time!
Any help will be highly appreciated!
I also attached an example for the usual MXF files we export

I have the same problem. I have a project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. None of the channels are muted.
Result:
The rendered file contains 8 channels, but only the first two channels contains any audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
I don't understand your answer to wleoni75's question. Could you please help me further?

Exporting QT with 6 individual aduio tracks

Similar Messages

Maybe you are looking for