Exporting Report definitions/source codes
Hi gyus,
I'm looking for a software or tool or an algorithm which I could use to export all the Report definitions and search in them. Especially I mean source codes of formulas and section-conditions. My "heritage" is a huge chaotic report and often I need to look for a specific thing which may be contained in any formula source code, any suppress condition, anywhere...
I know of .rpt Inspector, which is unfortunately too expensive for me ($400).
I know of the CR XI ability to export Report definitions to .txt files. But they aren't complete since they contain only condition source codes (those ones you type in via section expert), and I miss the formula source codes.
Thank you so much in advance for any help or tip
Regards
Martin F.
Hi, I do know about this feature. unfortunately, the resulting exported file doesn't contain complete report definition info. Especially formulas' source codes. So I can't search (CTRL+F) within these parts of source code.
Similar Messages
-
Missing setup statements when exporting to java source code
We are moving from Toplink 9i to Toplink 10g. (I know, we're a little behind the times). I saved the project in 10g checked to make sure all the settings were the same as in the 9i project. When I export the project to java source code, we're missing the following configuration setup statements.
Has anyone else run in to this issue? (login is a DatabaseLogin object)
// Configuration properties.
login.setUsesNativeSequencing(false);
login.setSequencePreallocationSize(50);
login.setSequenceTableName("SEQUENCE");
login.setSequenceNameFieldName("SEQ_NAME");
login.setSequenceCounterFieldName("SEQ_COUNT");
login.setShouldBindAllParameters(false);
login.setShouldCacheAllStatements(false);
login.setUsesByteArrayBinding(true);
login.setUsesStringBinding(false);
if (login.shouldUseByteArrayBinding()) {
login.setUsesStreamsForBinding(false);
login.setShouldForceFieldNamesToUpperCase(false);
login.setShouldOptimizeDataConversion(true);
login.setShouldTrimStrings(true);
login.setUsesBatchWriting(false);
if (login.shouldUseBatchWriting()) {
login.setUsesJDBCBatchWriting(true);
login.setUsesExternalConnectionPooling(false);
login.setUsesExternalTransactionController(false);These settings are all the defaults, so not required. The project code generation no longer includes defaults.
-- James : http://www.eclipselink.org -
Oracle Report lost source code
Hello Everyone,
I have one Oracle report 6i executable (REP) file without its relevant source file (RDF). Is there any way I can generate a source file from the executable file?
Regards
DharmeshIs there any way to do this in Forms?
We have a number of 6i forms executables with no source code.
Can you tell me what we would need to create the FMB's from the FMX's if there is a way -
How to export reports definitions?
Hello,
I would like to transfer my reports definitions to an other EM grid control, is it possible?
Thanks
Edited by: user4139871 on Feb 26, 2009 8:34 AMFinally it's not possible !
ANSWER FROM ORACLE
==============
No, this functionality is not available in current versions of the Grid Control product. If you want to see this capability included in future versions, a Product Enhancement Request needs to be opened. Reference the following Note available on My Oracle Support/Oracle MetaLink for more information on this process:
Note.214168.1 Logging an Enhancement Request -
After displaying result of report, my report goes back to source code edito
Hello experts,
I am currently having a big problem with my report. Here is the problem, after displaying the
result(write), when I press BACK button it is not going back to my selection-screen which is the
usual for reports. Now, what happens is that it goes back to the source code or worse, to the main menu of SAP.
What I want to do is that when I press BACK button it should go to either selection-screen 500 or
selection-screen 1500.
Here's a rough flow of what is happening in my report:
start report -> fetch records based on user input -> display results(not in ALV) ->
after displaying report, click 'BACK' button -> it goes back to source code
Now, here's what I want to do:
start report -> fetch records based on user input -> display results(not in ALV) ->
after displaying report, click 'BACK' button -> go back to either selection-screen 500 or 1500
or call again the transaction of my report.
Help would be greatly appreciated here.Hi guys,
Thanks again for the quick replies.Here is the source code:
REPORT zdealer_contacts NO STANDARD PAGE HEADING
LINE-COUNT 0
LINE-SIZE 255
MESSAGE-ID zz.
TYPE-POOLS: slis.
Data Dictionary Tables
TABLES: zts0001,
zsoemailid,
kna1,
zts_stpgeoloc.
Includes
*INCLUDE zun_globe_header. " Globe Telecom Report Header
Structures, internal tables and data declarations
TYPES: BEGIN OF t_upload,
kunnr LIKE zts0001-kunnr,
zaddress(100),
zcperson(30),
zcnumber(18),
END OF t_upload.
TYPES: BEGIN OF t_error,
kunnr LIKE zts0001-kunnr,
zaddress(100),
zcperson(30),
zcnumber(18),
END OF t_error.
TYPES: BEGIN OF t_kna1,
name1 LIKE kna1-name1,
END OF t_kna1.
TYPES: BEGIN OF t_zts0001,
kunnr LIKE zts0001-kunnr,
cdseq LIKE zts0001-cdseq,
zaddress LIKE zts0001-zaddress,
zcperson LIKE zts0001-zcperson,
zcnumber LIKE zts0001-zcnumber,
zactivated LIKE zts0001-zactivated,
name1 LIKE kna1-name1,
END OF t_zts0001.
DATA: it_upload TYPE STANDARD TABLE OF t_upload WITH HEADER LINE,
it_error TYPE STANDARD TABLE OF t_error WITH HEADER LINE,
it_kna1 TYPE STANDARD TABLE OF t_kna1 WITH HEADER LINE,
it_zts0001 TYPE STANDARD TABLE OF t_zts0001 WITH HEADER LINE.
DATA: it_ztstemp LIKE zts0001 OCCURS 100 WITH HEADER LINE,
it_ztstemp_gloc LIKE zts_stpgeoloc OCCURS 100 WITH HEADER LINE.
*AVH - start of insertion - 04/18/06
FIELD-SYMBOLS: <fs_zts0001> LIKE LINE OF it_zts0001.
**ALV Declarations
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
g_repid LIKE sy-repid,
gs_layout TYPE slis_layout_alv,
gt_list_top_of_page TYPE slis_t_listheader,
gt_events TYPE slis_t_event WITH HEADER LINE,
gt_print TYPE slis_print_alv.
CONSTANTS: gc_top TYPE slis_formname VALUE 'TOP_OF_PAGE',
gc_topsum TYPE slis_formname VALUE 'TOP_OF_LIST',
gc_ucomm TYPE slis_formname VALUE 'USER_COMMAND'.
*AVH - end of insertion
Variables
DATA: v_kunnr LIKE zts0001-kunnr,
v_title(100) TYPE c,
gc_kunnr(06) TYPE c,
v_compflag(1) TYPE c,
v_flag(1).
Selection Screen
*AVH - start of modification - 06/27/06
*if user is controller, selection-screen 500 will be called else,
*selection-scren 1500 will be called.
*selection-screen for controllers
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp2 USER-COMMAND ucomm1.
SELECTION-SCREEN COMMENT 2(20) text-007 FOR FIELD pr_upld.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(15) text-a11 FOR FIELD p_flnme.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:\'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list1 RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 500.
*selection-screen for non-controllers.
SELECTION-SCREEN BEGIN OF SCREEN 1500.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(22) text-002 FOR FIELD p_dcode.
PARAMETERS: p_dcode LIKE vbak-kunnr,
p_name1 LIKE kna1-name1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list2 RADIOBUTTON GROUP grp USER-COMMAND ucomm2.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_add RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(3) text-005 FOR FIELD pr_add.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_edit RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(4) text-006 FOR FIELD pr_edit.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(20) text-a12 FOR FIELD p_code.
PARAMETERS: p_code LIKE zts0001-cdseq.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 1500.
INITIALIZATION.
SELECT SINGLE kunnr comp_flag INTO (gc_kunnr,v_compflag)
FROM zsoemailid
WHERE bname = sy-uname.
IF sy-subrc <> 0.
MESSAGE i000 WITH
'You are not authorised to use this transaction'.
LEAVE PROGRAM.
ENDIF.
IF v_compflag = 'X'.
CALL SCREEN 500.
ELSE.
CALL SCREEN 1500.
ENDIF.
*AVH - end of modification
AT SELECTION-SCREEN OUTPUT.
PERFORM authority_check.
added by derick 050125
**-changed by weng rulloda 06012005
*AVH - start of insertion - 05/22/06
*no need to get value of kunnr from global memory
*since gc_kunnr would be filled via the select statement below
GET PARAMETER ID 'KUN' FIELD gc_kunnr.
*AVH - end of insertion
p_dcode = gc_kunnr.
*AVH - start of insertion - 05/22/06
**fetch the respective description of dealer based from p_dcode
**and put in parameter p_name1
SELECT SINGLE name1 FROM kna1
INTO p_name1
WHERE kunnr = p_dcode.
*AVH - end of insertion
*AVH - start of insertion - 05/22/06
**selection-screen parameters is based if user is controller or not.
**created new selection-screen conditions based from orig. code
v_kunnr = gc_kunnr.
LOOP AT SCREEN.
IF screen-name = 'P_DCODE'.
screen-input = '0'.
screen-output = '1'.
MODIFY SCREEN.
ELSEIF screen-name = 'P_NAME1'.
screen-input = '0'.
screen-output = '1'.
MODIFY SCREEN.
ELSEIF screen-name = 'P_CODE'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
IF pr_list2 = 'X' OR pr_add = 'X'.
LOOP AT SCREEN.
IF screen-name = 'P_CODE'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF pr_edit = 'X'.
LOOP AT SCREEN.
IF screen-name = 'P_CODE'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF pr_list1 = 'X'.
LOOP AT SCREEN.
IF screen-name = 'P_FLNME'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
*AVH - end of modification
AT SELECTION-SCREEN.
CHECK sy-ucomm = 'UCOMM1' OR sy-ucomm = 'UCOMM2'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_flnme.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_flnme.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
mask = ',.,..'
mode = 'O'
title = 'File Selection'
IMPORTING
filename = p_flnme
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_code.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_code.
DATA : BEGIN OF itab_list OCCURS 0,
kunnr LIKE zts0001-kunnr,
cdseq LIKE zts0001-cdseq,
zaddress LIKE zts0001-zaddress,
zcperson LIKE zts0001-zcperson,
zcnumber LIKE zts0001-zcnumber,
END OF itab_list.
DATA: tab_fields LIKE dfies OCCURS 0 WITH HEADER LINE,
tab_valuetab(100) TYPE c OCCURS 0 WITH HEADER LINE.
DATA: tab_dynnr TYPE sy-dynnr.
DATA: BEGIN OF tab_return_tab OCCURS 0.
INCLUDE STRUCTURE ddshretval.
DATA: END OF tab_return_tab.
DATA: progname LIKE sy-repid.
CLEAR: tab_valuetab[], tab_fields[].
SELECT kunnr cdseq zaddress zcperson zcnumber
INTO CORRESPONDING FIELDS OF TABLE itab_list
FROM zts0001
WHERE kunnr = v_kunnr.
tab_dynnr = sy-dynnr.
tab_fields-tabname = 'ZTS0001'.
tab_fields-fieldname = 'KUNNR'.
APPEND tab_fields.
tab_dynnr = sy-dynnr.
tab_fields-tabname = 'ZTS0001'.
tab_fields-fieldname = 'CDSEQ'.
APPEND tab_fields.
tab_fields-tabname = 'ZTS0001'.
tab_fields-fieldname = 'ZADDRESS'.
APPEND tab_fields.
tab_fields-tabname = 'ZTS0001'.
tab_fields-fieldname = 'ZCPERSON'.
APPEND tab_fields.
tab_fields-tabname = 'ZTS0001'.
tab_fields-fieldname = 'ZCNUMBER'.
APPEND tab_fields.
LOOP AT itab_list.
tab_valuetab = itab_list-kunnr.
APPEND tab_valuetab.
tab_valuetab = itab_list-cdseq.
APPEND tab_valuetab.
tab_valuetab = itab_list-zaddress.
APPEND tab_valuetab.
tab_valuetab = itab_list-zcperson.
APPEND tab_valuetab.
tab_valuetab = itab_list-zcnumber.
APPEND tab_valuetab.
ENDLOOP.
progname = sy-repid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'CDSEQ'
dynpprog = progname
dynpnr = '1000'
dynprofield = 'P_CODE'
TABLES
value_tab = tab_valuetab
field_tab = tab_fields
return_tab = tab_return_tab
EXCEPTIONS
OTHERS = 0.
START-OF-SELECTION.
IF pr_edit = 'X' AND p_code IS INITIAL.
MESSAGE i008 WITH 'Please specify a ship-to code.'.
LEAVE TO TRANSACTION 'ZDCONTACT'.
ENDIF.
PERFORM get_data.
IF pr_upld = 'X'.
PERFORM upload_file.
ELSEIF pr_add = 'X'.
PERFORM add_record.
ELSEIF pr_edit = 'X'.
PERFORM edit_record.
ELSEIF pr_list1 = 'X' OR pr_list2 = 'X'.
PERFORM display_alv.
ENDIF.
END-OF-SELECTION.
based from ALV PF-STATUS
IF sy-ucomm = '&F03'. "BACK
LEAVE TO TRANSACTION 'ZDCONTACT'.
ELSEIF sy-ucomm = '&F15'. "EXIT
LEAVE TO TRANSACTION 'ZDCONTACT'.
ELSEIF sy-ucomm = '&F12'. "CANCEL
LEAVE TO TRANSACTION 'ZDCONTACT'.
ENDIF.
*& Form authority_check
FORM authority_check.
CALL FUNCTION 'AUTHORITY_CHECK'
EXPORTING
field1 = 'TCD' "MDM
object = 'S_TCODE'
user = sy-uname
value1 = 'ZMEN'
VALUE3 = '01' MDM
EXCEPTIONS
user_dont_exist = 1
user_is_authorized = 2
user_not_authorized = 3
user_is_locked = 4
OTHERS = 5.
IF sy-subrc NE 2.
**-added by weng 04/28/2006
**-if user is not authorized to use dealer portal check if he is
**- authorized to use the tcode ZDCONTACT
CALL FUNCTION 'AUTHORITY_CHECK'
EXPORTING
field1 = 'TCD' "MDM
object = 'S_TCODE'
user = sy-uname
value1 = 'ZDCONTACT'
VALUE3 = '01' MDM
EXCEPTIONS
user_dont_exist = 1
user_is_authorized = 2
user_not_authorized = 3
user_is_locked = 4
OTHERS = 5.
**-weng
IF sy-subrc NE 2.
MESSAGE i000 WITH
'You are not authorised to use this transaction'.
LEAVE PROGRAM.
ENDIF.
ENDIF.
ENDFORM. " AUTHORITY_CHECK
*& Form get_data
FORM get_data.
*AVH - start of insertion - 04/19/06
**records selected from table zts0001 that has been marked as
**activated will be fetched otherwise, ignore.
IF v_kunnr IS INITIAL.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_zts0001
FROM zts0001.
ELSEIF v_compflag = 'X'.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_zts0001
FROM zts0001.
ELSE.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_zts0001
FROM zts0001
WHERE kunnr = v_kunnr.
ENDIF.
*AVH - start of insertion - 05/24/06
**fetch name based from kunnr and put in itab
LOOP AT it_zts0001 ASSIGNING <fs_zts0001>.
SELECT SINGLE name1 FROM kna1
INTO <fs_zts0001>-name1
WHERE kunnr = <fs_zts0001>-kunnr.
ENDLOOP.
*AVH - end of insertion
ENDFORM. " get_data
*& Form Upload_file
FORM upload_file.
DATA: lv_seq(5) TYPE n,
lv_ctr(5) TYPE c,
lv_kunnr LIKE it_upload-kunnr.
v_title = 'Upload from File'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_flnme
filetype = 'DAT'
TABLES
data_tab = it_upload
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE i008 WITH 'File does not exist.'.
IF v_compflag IS INITIAL.
LEAVE TO TRANSACTION 'ZDCONTACT'.
ELSE.
LEAVE TO TRANSACTION 'ZDCONTACT'.
ENDIF.
ENDIF.
CHECK sy-subrc EQ 0.
DELETE it_upload
WHERE zaddress EQ space
AND zcperson EQ space
AND zcnumber EQ space.
SORT it_zts0001 BY kunnr ASCENDING cdseq DESCENDING.
SORT it_upload BY kunnr ASCENDING.
LOOP AT it_upload.
lv_kunnr = it_upload-kunnr.
AT NEW kunnr.
AVH - start of insertion - 06/30/06
SELECT SINGLE kunnr FROM zsoemailid
INTO lv_kunnr
WHERE kunnr = it_upload-kunnr.
if it_upload-kunnr is not found in table ZSOEMAILID, it will
not be included in the upload.
IF sy-subrc <> 0.
DELETE it_upload.
CLEAR it_upload.
CONTINUE.
ENDIF.
AVH - end of insertion
READ TABLE it_zts0001 WITH KEY kunnr = lv_kunnr.
IF sy-subrc EQ 0.
lv_seq = it_zts0001-cdseq.
ELSE.
CLEAR lv_seq.
ENDIF.
ENDAT.
IF it_upload-zaddress IS INITIAL.
MOVE-CORRESPONDING it_upload TO it_error.
APPEND it_error.
CLEAR it_error.
ELSE.
REPLACE '"' WITH '' INTO it_upload-zaddress.
REPLACE '"' WITH '' INTO it_upload-zaddress.
REPLACE '"' WITH '' INTO it_upload-zcperson.
REPLACE '"' WITH '' INTO it_upload-zcperson.
CONDENSE it_upload-zaddress.
CONDENSE it_upload-zcperson
ADD 1 TO lv_seq.
MOVE: it_upload-kunnr TO it_ztstemp-kunnr,
lv_seq TO it_ztstemp-cdseq,
it_upload-zaddress TO it_ztstemp-zaddress,
it_upload-zcperson TO it_ztstemp-zcperson,
it_upload-zcnumber TO it_ztstemp-zcnumber,
'X' TO it_ztstemp-zactivated,
sy-uname TO it_ztstemp-zcreated_by,
sy-datum TO it_ztstemp-zchanged_date.
MOVE-CORRESPONDING it_ztstemp TO it_ztstemp_gloc.
APPEND: it_ztstemp, it_ztstemp_gloc.
CLEAR: it_ztstemp, it_ztstemp_gloc.
ENDIF.
ENDLOOP.
IF NOT it_ztstemp[] IS INITIAL.
INSERT zts0001 FROM TABLE it_ztstemp.
INSERT zts_stpgeoloc FROM TABLE it_ztstemp_gloc.
WRITE:/ 'List of Records Uploaded.' COLOR 1 INTENSIFIED ON.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE:/(020) 'Dealer Code' CENTERED,
(007) 'Code' CENTERED,
(100) 'Address',
(030) 'Contact Person' CENTERED,
(018) 'Contact Number' CENTERED.
FORMAT COLOR OFF.
WRITE:/(179) sy-uline.
DESCRIBE TABLE it_ztstemp LINES lv_ctr.
SORT it_ztstemp BY kunnr cdseq.
LOOP AT it_ztstemp.
WRITE:/(020) it_ztstemp-kunnr,
(007) it_ztstemp-cdseq,
(100) it_ztstemp-zaddress,
(030) it_ztstemp-zcperson,
(018) it_ztstemp-zcnumber.
ENDLOOP.
SKIP 1.
WRITE:/ 'TOTAL :', lv_ctr.
ENDIF.
IF NOT it_error[] IS INITIAL.
SKIP 2.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE:/(020) 'Dealer Code' CENTERED,
(030) 'Contact Person' CENTERED,
(018) 'Contact Number' CENTERED.
FORMAT COLOR OFF.
WRITE:/(070) sy-uline.
DESCRIBE TABLE it_error LINES lv_ctr.
SORT it_error BY kunnr zcperson.
LOOP AT it_error.
WRITE:/ 'With No Address.' COLOR 6 INTENSIFIED ON.
WRITE:/(020) it_error-kunnr,
(030) it_error-zcperson,
(018) it_error-zcnumber.
ENDLOOP.
SKIP 1.
WRITE:/ 'TOTAL :', lv_ctr.
ENDIF.
ENDFORM. " Upload_file
*& Form add_record
FORM add_record.
v_title = ''.
IF NOT v_kunnr IS INITIAL.
SUBMIT zdealer_contacts_add_edit AND RETURN
WITH p_kunnr = v_kunnr
WITH p_name1 = p_name1 "AVH
WITH p_cdseq = space
WITH p_flag = 'A'
WITH p_addr = it_zts0001-zaddress
WITH p_pers = it_zts0001-zcperson
WITH p_numb = it_zts0001-zcnumber
VIA SELECTION-SCREEN.
ENDIF.
LEAVE TO TRANSACTION 'ZDCONTACT'.
ENDFORM. " add_record
*& Form edit_record
FORM edit_record.
v_title = ''.
READ TABLE it_zts0001 WITH KEY kunnr = v_kunnr
cdseq = p_code.
IF sy-subrc EQ 0.
SUBMIT zdealer_contacts_add_edit AND RETURN
WITH p_kunnr = v_kunnr
WITH p_name1 = p_name1 "AVH
WITH p_cdseq = p_code
WITH p_flag = 'E'
WITH p_addr = it_zts0001-zaddress
WITH p_pers = it_zts0001-zcperson
WITH p_numb = it_zts0001-zcnumber
WITH v_controller = v_compflag
VIA SELECTION-SCREEN.
ELSE.
MESSAGE i008 WITH 'No record found.'.
CALL TRANSACTION 'ZDCONTACT'.
ENDIF.
LEAVE TO TRANSACTION 'ZDCONTACT'.
ENDFORM. " edit_record
*& Form display_records
*FORM display_records.
IF NOT it_zts0001[] IS INITIAL.
v_title = 'List of Dealer Contacts'.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE:/(020) 'Customer Number' CENTERED,
(007) 'Code' CENTERED,
(100) 'Address',
(030) 'Contact Person' CENTERED,
(018) 'Contact Number' CENTERED.
FORMAT COLOR OFF.
WRITE:/(179) sy-uline.
SORT it_zts0001 BY kunnr cdseq.
LOOP AT it_zts0001.
WRITE:/(020) it_zts0001-kunnr,
(007) it_zts0001-cdseq,
(100) it_zts0001-zaddress,
(030) it_zts0001-zcperson,
(018) it_zts0001-zcnumber.
ENDLOOP.
ELSE.
MESSAGE i008 WITH 'No records to display.'.
ENDIF.
*ENDFORM. " display_records
*& Form display_alv
FORM display_alv.
SORT it_zts0001 BY kunnr cdseq.
PERFORM f_build_layout USING gs_layout.
PERFORM f_init_fieldcat USING gt_fieldcat[].
PERFORM f_init_events USING 'BACK' gt_events[].
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_user_command = 'USER_COMMAND'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
i_save = 'X'
it_sort = gt_sort
TABLES
t_outtab = it_zts0001[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_ALV
FORM top_of_page *
FORM top_of_page.
*ALV Header declarations
DATA: t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
lv_title(60),
lv_user(60),
lv_date(10),
lv_time(10),
lv_time_n_date(30),
lv_dcode_n_name(150),
lv_dlr_n_desc(100),
ld_lines TYPE i,
ld_linesc(10) TYPE c.
Title
CLEAR: lv_title, wa_header.
MOVE sy-title TO lv_title.
wa_header-typ = 'H'.
wa_header-info = lv_title.
APPEND wa_header TO t_header.
CLEAR wa_header.
User
CLEAR: lv_user, wa_header.
CONCATENATE: 'Generated by:' sy-uname
INTO lv_user SEPARATED BY space.
wa_header-typ = 'A'.
wa_header-info = lv_user.
APPEND wa_header TO t_header.
CLEAR wa_header.
*Date and time
CLEAR: lv_date, lv_time.
WRITE: sy-datum TO lv_date MM/DD/YYYY,
sy-uzeit TO lv_time USING EDIT MASK '__:__:__'.
CONCATENATE: 'Generated on:' lv_date lv_time
INTO lv_time_n_date SEPARATED BY space.
wa_header-typ = 'A'.
wa_header-info = lv_time_n_date.
APPEND wa_header TO t_header.
CLEAR wa_header.
IF NOT v_kunnr IS INITIAL AND v_compflag IS INITIAL.
*Dealer code and name
CONCATENATE: 'Dealer:' p_dcode p_name1
INTO lv_dcode_n_name SEPARATED BY space.
wa_header-typ = 'A'.
wa_header-info = lv_dcode_n_name.
APPEND wa_header TO t_header.
CLEAR wa_header.
ENDIF.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
ENDFORM. " TOP_OF_PAGE
FORM f_build_layout *
--> %LAYOUT *
FORM f_build_layout USING %layout TYPE slis_layout_alv.
%layout-zebra = 'X'.
%layout-colwidth_optimize = 'X'.
ENDFORM. " F_BUILD_LAYOUT
FORM f_init_fieldcat *
--> %FIELDCAT *
FORM f_init_fieldcat USING %fieldcat TYPE slis_t_fieldcat_alv.
DATA: lc_fieldcat TYPE slis_fieldcat_alv.
CLEAR lc_fieldcat.
DEFINE m_field.
add 1 to lc_fieldcat-col_pos.
lc_fieldcat-fieldname = &1.
lc_fieldcat-outputlen = &2.
lc_fieldcat-seltext_l = &3.
lc_fieldcat-do_sum = &4.
lc_fieldcat-inttype = &5.
lc_fieldcat-hotspot = &6.
lc_fieldcat-fix_column = &7.
lc_fieldcat-ddictxt = 'L'.
lc_fieldcat-no_zero = 'X'.
append lc_fieldcat to %fieldcat.
END-OF-DEFINITION.
IF v_kunnr IS INITIAL.
m_field 'KUNNR' '5' 'Dealer Code' '' '' '' ''.
ENDIF.
IF v_compflag = 'X'.
m_field 'KUNNR' '5' 'Dealer Code' '' '' '' ''.
ENDIF.
IF v_compflag = 'X'.
m_field 'NAME1' '40' 'Dealer Name' '' '' '' ''.
ENDIF.
m_field 'CDSEQ' '05' 'Ship-To Code' '' '' '' ''.
m_field 'ZADDRESS' '100' 'Address' '' '' '' ''.
m_field 'ZCPERSON' '30' 'Contact Person' '' '' '' ''.
m_field 'ZCNUMBER' '18' 'Contact Number' '' '' '' ''.
IF v_kunnr IS INITIAL.
m_field 'NAME1' '40' 'Dealer Name' '' '' '' ''.
ENDIF.
m_field 'ZACTIVATED' '1' 'Activated' '' '' '' ''.
ENDFORM. " f_init_fieldcat
FORM f_init_events *
--> P_TYPE *
--> %EVENTS *
FORM f_init_events USING p_type CHANGING %events TYPE slis_t_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = %events
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc = 0.
PERFORM f_build_events USING: slis_ev_user_command.
IF p_type = 'TOP'.
PERFORM f_build_events USING: gc_top.
ELSEIF p_type = 'SUM'.
PERFORM f_build_events_sum USING: gc_topsum.
ENDIF.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_INIT_EVENTS
FORM user_command *
--> P_UCOMM *
--> P_SELFIELD *
FORM user_command USING p_ucomm LIKE sy-ucomm
p_selfield TYPE slis_selfield.
CASE p_ucomm.
WHEN 'E'.
CALL SELECTION-SCREEN 500.
ENDCASE.
ENDFORM.
FORM f_build_events *
--> %EVENT *
FORM f_build_events USING %event.
READ TABLE gt_events WITH KEY name = %event.
IF sy-subrc = 0.
MOVE: %event TO gt_events-form.
MOVE 'USER_COMMAND' TO gt_events-form.
MODIFY gt_events INDEX sy-tabix.
ENDIF.
ENDFORM. " F_BUILD_EVENTS -
How to download ABAP(report,module pool...etc) source code to client PC?
hi guys,
please advise how can i download/export ABAP(report,module pool...etc) source code to client PC?
thanks.hi
this report is to export to another server...
PROGRAM ZDOWNLOAD_SAP
LINE-SIZE 132
LINE-COUNT 62
NO STANDARD PAGE HEADING.
This program up / downloads from / to a local dataset
all the components of an ABAP - i.e TEXTS, the entire CUA
including statuses and menus, DYNPROS and source code.
Program documentation and variants are not handled.
INCLUDED programs are automatically handled both on upload
or download. INCLUDE selection can be excluded or generic
e.g only handle INCLUDES starting with ZIN*
INCLUDES within INCLUDES alos handled.
The only restriction is on UPLOAD the INCLUDED programs must come
from the same directory as the main program.
On Download of course the ABAP must exist in the library.
Note for LINUX and BATCH users
This program was originally designed as a one off tool for
getting ABAPS etc from a SAP R2 (IBM MVS mainframe system) into
an R3 test system minimising the need for a large amount of
mainframe sysprogs (anybody remember what they were !!) time
and support to say nothing of access problems from TSO /JES2 /
SAP R2. At that time network connections were patchy and the
transport systems largely incompatable and not very reliable.
This program was originally designed as a one off tool for
Must run on Windows front end ---- If you are running SAP with
LINUX on your work station you will have to change the WS_UPLOAD
and WS_DOWNLOAD functions to reflect the Linux file system. The
contents of the data sets themseleves do not need to be changed
Program can easily be modified to run in batch and store
the data on a UNIX host. Change the WS_UPLOAD and WS_DOWNLOAD
to read from and write to UNIX data sets (OPEN FILE etc).
You will also need to modify the parts of the program that get
the DOS directory and display the Windows file paths.
The actual abap data sets do not need to be changed.
Rel 4.0 names can now be up to 40 bytes long
Dynpros and CUA have changed from rel 3.1
Tabstrips now loaded and unloaded in dynpros
Please note restriction on 4.6 systems for users who
have ABAP names which include '/'s in their names.
Rel 4.6b, 4.6c Abap names can include the '/' in their names
e.g /CUST1/CUST2/ORDER
This causes problems when storing to a local file.
a solution is to change the name to %CUST1%CUST2%ORDER i.e / will
be changed to %. On upload the % should be changed back to /
again. This change still needs to be implemented.
If you don't use the / in the abap name then this is not a problem.
If file to be uploaded is in rel 3 format then names are only 8
bytes long.
program uses 3 datasets per abap
1) abapname.eee source, dynpr logic, texts, CUA stuff
2) abapname.hhh dynpr header
3) abapname.fff dynpro fields.
because of varying lengths and contents 3 data sets are used. The
complexity of combining all these to 1 data set would make the
program far too complex.
NOTE: This version of the program can only be used on
release 4.0 or higher. Once an ABAP has been converted
to rel 4.0 it cannot be converted back to rel 3.0
on a release 3/3.1 system. Release 4 CUA tables
are different. Use release 3 version of this program
for releases 3.0 and 3.1. Available on SAPFANS website.
Note that data to be uploaded must have been previously downloaded
by this program (any version since rel 2.0) - except for Initial
Load -- see end of these comments.
Dynpros and CUA statuses have changed since rel 3.1
This program will handle rel 3.1 format on upload but will
download in rel 4.0 format. To upload 3.1 format specify an 'X'
in the rel3 parameter.
If you have downloaded components in rel 4.0 format and you
want to re-load to a 3.1 system you will have to load
the source via standard upload and re-create dynpros and the CUA
manually.
As names can now be longer than 8 characters you can only
use this program if the SAP front end (SAPGUI) supports
long file names (WIN 95/98 or WIN NT). Windows 3.x will not
work as the underlying DOS system cannot handle long file names.
UPLOAD function and DOS directory.
When an ABAP is selected for UPLOAD then the DOS
directory is read into a table. A file called ABAP.BAT is created,
and down loaded to the 'C' drive and executed.
This file executes a DOS DIR command and pipes the output
into a dataset which is then uploaded into an internal
table on SAP.
Note on running DOS commands from ABAP
The first time this procedure is executed you will see a DOS window
which you will have to close manually. To get round this
use windows explorer to select the file ABAP.BAT and then
right mouse click on the file name. Select the
properties window. From this click the CLOSE on EXIT box. This
will then automatically close the DOS function after it has
executed. (Windows restriction).
The DOS function has not been tested using Windows 2000 so
it might not work. OK on W95,W98,WME and Windows NT (No Thanks)
If INCLUDE programs are wanted on UPLOAD only the specified
directory is searched.
Instead of entering path name manually you can click on
the path parameter. Because of Windows restriction you will
have to select ANY file in the relevant directory.
The path will then be copied on to the selection screen.
To do still : Merge 3 files to one and compress output to .ZIP file
fix 4.5 4.6 problem of abaps containing '/' in the name
possibility to automatically up / download referenced
function modules with selection criteria like INCLUDES
To load the ist time into a system.
Create program with ABAP editor and Upload the .EEE file.
Delete ist line (????SRCE) in the ABAP EDITOR --NOT THE DISK FILE
Delete all the source from the line that starts ????TEXT (towards
the end file) till the end so the last line in your source is ENDFORM.
DO NOT ALTER THE DISK FILE. DO THESE CHANGES IN THE ABAP EDITOR.
Save file and execute
Use following parameters (Note the ist time you won't get proper
text on the selection screen).
Function U
Path full dos path containing source e.g c:\abaps\
NOTE YOU MUST ENTER THE FINAL \ as above.
REPID the program name. e.g ZZJIMHXX
note that on the DISK you will see 3 files
ZZJIMHXX.EEE, ZZJIMHXX.FFF, ZZJIMHXX.HHH
just use the name before the dos qualifier - the
program will do the rest
ignore other parameters
The program will then load itself with all the texts etc.
It should now be ready for use.
Macros
DEFINE DEFINE_TABLE.
DATA: &1 LIKE &2 OCCURS &3 WITH HEADER LINE.
END-OF-DEFINITION.
DEFINE CLS.
REFRESH &1.
CLEAR &1.
END-OF-DEFINITION.
DEFINE INIT.
IF &1 NE SPACE.
SEARCH &1 FOR '. .'.
IF SY-SUBRC = 0.
WRITE '*' TO &1+SY-FDPOS(1).
ENDIF.
TRANSLATE &1 USING '*%'.
ELSE.
MOVE '%' TO &1.
ENDIF.
END-OF-DEFINITION.
end of macros
/ SAP standard tables */
TABLES: D020S, "Dynpro header
D020T, "Dynpro title
D021T, "Screen field keyword texts
TRDIR, "Attribute table
TADIR, "Dev. class etc.
EUDB, "CUA data
TSTC, "transaction data
TITLE, "CUA titles
RSMPTEXTS. "Function texts (rel 4.0)
/ Work tables to hold ABAP source etc, and dynpro */
/ contents. */
DATA: BEGIN OF H. "Header
INCLUDE STRUCTURE D020S.
DATA: END OF H.
DATA: BEGIN OF H1 OCCURS 10, "Header
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D020S.
DATA: END OF H1.
DATA: BEGIN OF H2 OCCURS 0, "Rel 3 dynp. header
CNAME(8) TYPE C,
CNUM(4) TYPE C,
NNAME(8) TYPE C,
NNUM(4) TYPE C,
FILL(51) TYPE C,
CDAT(6) TYPE C,
CTIM(6) TYPE C,
END OF H2.
DATA: BEGIN OF F OCCURS 250. "Dynpro Fields
INCLUDE STRUCTURE D021S.
DATA: END OF F.
DATA: BEGIN OF F1 OCCURS 500, "Dynpro Fields
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D021S.
DATA: END OF F1.
DATA: BEGIN OF OLD_F1 OCCURS 0, "Dynpro Fields (rel 3)
NAME(8) TYPE C,
NUMBER(4) TYPE C.
INCLUDE STRUCTURE D021SE_OLD.
DATA: END OF OLD_F1.
DATA: BEGIN OF F2 OCCURS 0, "Dynpro Fields (rel 3)
TFIL(284) TYPE C,
END OF F2.
DATA: BEGIN OF M OCCURS 3. "Match codes (if any)
INCLUDE STRUCTURE D023S.
DATA: END OF M.
DATA: BEGIN OF E OCCURS 0. "Dynpro Logic
INCLUDE STRUCTURE D022S.
DATA: END OF E.
DATA: BEGIN OF E1 OCCURS 0, "Dynpro Logic
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D022S.
DATA: END OF E1.
DATA: BEGIN OF T OCCURS 0, "prog name and dynpro nrs
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N,
END OF T.
DATA: BEGIN OF R OCCURS 56, "prog name and language
NAME(40) TYPE C, "rel 4
LANGUAGE(1) TYPE C,
END OF R.
DATA: BEGIN OF S OCCURS 3000,
TXT(180) TYPE C, "rel 4 was 132
END OF S.
DATA: BEGIN OF R1 OCCURS 50, "for include programs
NAME(40) TYPE C, "rel 4
INSTANCE(3) TYPE P,
END OF R1.
DATA: BEGIN OF S1 OCCURS 3000,
TXT(180) TYPE C, " rel 4 was 132
END OF S1.
DATA: BEGIN OF U OCCURS 100, "Text elements
TXT(180) TYPE C, " rel 4 was 132
END OF U.
DATA: BEGIN OF DIR. "ABAP Attributes
INCLUDE STRUCTURE TRDIR.
DATA: END OF DIR.
DATA: BEGIN OF DTXT. "Dynpro field keyword texts
INCLUDE STRUCTURE D021T.
DATA: END OF DTXT.
/ This data contains all the components of the */
/ CUA such as menus, statuses, Pfkeys */
/ As from rel 4.5 Tabstrips are automatically copied as well */
/ The rel3 parameter must be set however to load the */
/ correct version of the CUA tables if uploading rel 3 */
/ data to a rel 4 system. */
/ Rel 4.0B can convert 3.1 and earlier CUA's */
/ This could change later however. */
CUA Tables.
Key of CUA tables in EUDB data set. Name is len 40 in rel 4.0
DATA BEGIN OF EU_KEY.
INCLUDE STRUCTURE RSEU1_KEY.
DATA END OF EU_KEY.
Status
DATA BEGIN OF STA OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAT. " rel 4
DATA END OF STA.
Functions
DATA BEGIN OF FUN OCCURS 0.
INCLUDE STRUCTURE RSMPE_FUNT. "rel 4
DATA END OF FUN.
Menus
DATA BEGIN OF MEN OCCURS 0.
INCLUDE STRUCTURE RSMPE_MEN. "rel 4.0
DATA END OF MEN.
Menus (texts)
DATA BEGIN OF MTX OCCURS 0.
INCLUDE STRUCTURE RSMPE_MNLT. "rel 4.0
DATA END OF MTX.
Action Bar
DATA BEGIN OF ACT OCCURS 0.
INCLUDE STRUCTURE RSMPE_ACT. "rel 4.0
DATA END OF ACT.
Push Buttons
DATA BEGIN OF BUT OCCURS 0.
INCLUDE STRUCTURE RSMPE_BUT. "rel 4.0
DATA END OF BUT.
PF-Keys
DATA BEGIN OF PFK OCCURS 0.
INCLUDE STRUCTURE RSMPE_PFK. "rel 4.0
DATA END OF PFK.
Function sets
DATA BEGIN OF SET OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAF. "rel 4.0
DATA END OF SET.
Documentation
DATA BEGIN OF DOC OCCURS 0.
INCLUDE STRUCTURE RSMPE_ATRT. "rel 4.0
DATA END OF DOC.
Title codes with text
DATA: BEGIN OF TIT OCCURS 0.
INCLUDE STRUCTURE RSMPE_TITT. "rel 4.0
DATA: END OF TIT.
DATA BEGIN OF FTX OCCURS 0. "rel 4.0
INCLUDE STRUCTURE RSMPTEXTS.
DATA END OF FTX.
rel 3.1 CUA components.
Status
DATA BEGIN OF OLD_STA OCCURS 0.
INCLUDE STRUCTURE RSEU1_GEN. " rel 3.1
DATA END OF OLD_STA.
Functions
DATA BEGIN OF OLD_FUN OCCURS 0.
INCLUDE STRUCTURE RSEU1_FUN. "rel 3.1
DATA END OF OLD_FUN.
Menus
DATA BEGIN OF OLD_MEN OCCURS 0.
INCLUDE STRUCTURE RSEU1_MEN. "rel 3.1
DATA END OF OLD_MEN.
Menus (texts)
DATA BEGIN OF OLD_MTX OCCURS 0.
INCLUDE STRUCTURE RSEU1_TXM. "rel 3.1
DATA END OF OLD_MTX.
Action Bar
DATA BEGIN OF OLD_ACT OCCURS 0.
INCLUDE STRUCTURE RSEU1_ACT. "rel 3.1
DATA END OF OLD_ACT.
Push Buttons
DATA BEGIN OF OLD_BUT OCCURS 0.
INCLUDE STRUCTURE RSEU1_BUT. "rel 3.1
DATA END OF OLD_BUT.
PF-Keys
DATA BEGIN OF OLD_PFK OCCURS 0.
INCLUDE STRUCTURE RSEU1_PFK. "rel 3.1
DATA END OF OLD_PFK.
Function sets
DATA BEGIN OF OLD_SET OCCURS 0.
INCLUDE STRUCTURE RSEU1_SET. "rel 3.1
DATA END OF OLD_SET.
Documentation
DATA BEGIN OF OLD_DOC OCCURS 0.
INCLUDE STRUCTURE RSEU1_ETM. "rel 3.1
DATA END OF OLD_DOC.
Title codes with text
DATA: BEGIN OF OLD_TIT OCCURS 0.
INCLUDE STRUCTURE TITLE. "rel 3.1
DATA: END OF OLD_TIT.
dynamic function text
DATA BEGIN OF FDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_FDYN. "not req for rel 4.
DATA END OF FDN.
Icons
DATA BEGIN OF FIN OCCURS 1.
INCLUDE STRUCTURE RSEU1_ICON. "not req for rel 4
DATA END OF FIN.
dynamic menu texts
DATA BEGIN OF MDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_MDYN. "not req for rel 4.
DATA END OF MDN.
Symbol list
DATA BEGIN OF SYM OCCURS 0.
INCLUDE STRUCTURE RSEU1_SYMB.
DATA END OF SYM.
Status Short text
DATA BEGIN OF STX OCCURS 0.
INCLUDE STRUCTURE RSEU1_CTX.
DATA END OF STX.
Attributes for function key settings (menu bars) Rel 3.0
DATA BEGIN OF ATT OCCURS 0.
INCLUDE STRUCTURE RSEU1_HAT.
DATA END OF ATT.
Include-Menus
DATA BEGIN OF INC OCCURS 3.
INCLUDE STRUCTURE RSEU1_INC.
DATA END OF INC.
Last used numbers
DATA BEGIN OF LAST.
INCLUDE STRUCTURE RSEU1_LST.
DATA END OF LAST.
data for call transaction (SE41 to re-generate the CUA)
DATA: BEGIN OF T_BDC_TAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA. "BDC data
DATA: END OF T_BDC_TAB.
DATA: BEGIN OF T_MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF T_MESSTAB.
/ Program data */
DATA: NUMBER(4) TYPE N,
OLDNUM(4) TYPE N,
FILESIZE TYPE I,
NR_OF_BYTES TYPE I,
I(3) TYPE P,
IX(3) TYPE P,
J(3) TYPE P,
L(3) TYPE P,
CUA-FLAG(1) TYPE C,
CUA_RETURN(10) TYPE C,
DYNPRO_MESSAGE(160) TYPE C,
DYNPRO_LINE TYPE P,
DYNPRO_WORD(30) TYPE C,
NUM(3) TYPE N,
DYNNAME(44) TYPE C,
FN1(128) TYPE C,
FN2(128) TYPE C,
FN3(128) TYPE C,
W_ITERATE(1) TYPE C,
MAIN(1) TYPE C,
FUNC(1) TYPE C,
OLDNAME(40) TYPE C,
OLD-FUNC(8) TYPE C,
NEW-FUNC(8) TYPE C,
FOUND(1) TYPE C,
LANGUAGE LIKE SY-LANGU,
FIRST-TIME(1) TYPE C VALUE 'Y',
OK-CODE(5) TYPE C,
NAME(40) TYPE C, "rel 4
TXLINE(70) TYPE C,
LINE(132) TYPE C.
DATA:
UL_FILE(128) TYPE C,
DL_FILE(128) TYPE C,
DOSLINE(72) TYPE C.
DATA: BEGIN OF DOSDIR OCCURS 0,
TEXT(72),
END OF DOSDIR.
DATA: BEGIN OF I_PROG OCCURS 0,
NAME(40),
END OF I_PROG.
DATA: BEGIN OF I_PROGT OCCURS 0,
NAME(40),
END OF I_PROGT.
DATA: BEGIN OF I_INCLUDE OCCURS 0,
NAME(40),
HANDLED(1) TYPE C,
END OF I_INCLUDE.
DATA: BEGIN OF I_INCL OCCURS 0,
NAME(40),
END OF I_INCL.
DATA: BUFFER(1024).
DATA: WINSYS(3).
DATA: GLOBAL_FILEMASK_MASK(20), GLOBAL_FILEMASK_TEXT(20).
DATA: GLOBAL_FILEMASK_ALL(80).
DATA: T_FILENAME(128),
TMP_FILENAME(128),
T_MODE(1),
FIELDLN TYPE I.
DEFINE_TABLE I_DYNPFIELDS DYNPREAD 0. "dynpro fields to be updated
DATA: I_FLDS LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS: <F>.
/ Parameters */
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS REPID FOR TRDIR-NAME OBLIGATORY .
PARAMETERS:
FUNCTION(1) TYPE C OBLIGATORY, "Function
DSNAME(40) TYPE C, "Data set name
INCLUDES(1) TYPE C DEFAULT 'N', "Resolve Includes
IMASK(40) TYPE C, "Include Mask
CLASS LIKE TRDIR-CLAS,
AUTHOR LIKE TRDIR-CNAM, "Author
APPL LIKE TRDIR-APPL,
PATH(88) TYPE C DEFAULT 'A:\',
REL3(1) TYPE C.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK A1.
/ Check users workstation is running WINDOWS, */
/ WINDOWS 95, or WINDOWS NT. OS/2 no good for */
/ this application. */
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'WS'
IMPORTING
RETURN = WINSYS.
IF WINSYS(2) NE 'WN'. "Win 3.X no good either
WRITE: / 'Windows NT or Windows 95/98 is required'.
EXIT.
ENDIF.
/ Get names of programs to be handled. */
/ Name can be a single value, many values or ranges */
/ as per standard SELECT-OPTIONS on selection screen */
/ On Download read TRDIR and store program names in a table */
/ as per selection options. */
/ On upload read the specified directory for all files of */
/ type .EEE from specified directory */
/ compare file names with selection criteria */
MOVE FUNCTION TO FUNC.
MOVE 'Y' TO MAIN.
CASE FUNC.
WHEN 'U'. "Upload required
PERFORM READ_DOS_DIRECTORY.
PERFORM GET_RANGE_UL. "Get list of progs to process
WHEN 'D'. "Download required
PERFORM GET_RANGE_DL. "Get list of progs to process
WHEN OTHERS.
WRITE: / 'Function not performed due to user request'.
EXIT.
ENDCASE.
SORT I_PROG.
DELETE ADJACENT DUPLICATES FROM I_PROG.
For download INCLUDE handling can be resolved via function
module call.
All Includes within Includes are also resolved by the function
module call.
Note that this method does not work if program itself is of type
I (it's an include)
In this case we can still search the source.
IF FUNC = 'D'.
IF INCLUDES = 'Y'.
PERFORM GET_INCLUDES_DL.
PERFORM PROCESS_INCLUDES_DL.
ENDIF.
ENDIF.
Program list from selection criteria i.e excluding INCLUDES found
LOOP AT I_PROG.
MOVE I_PROG-NAME TO R1-NAME.
APPEND R1.
DESCRIBE TABLE R1 LINES I.
WHILE I NE 0.
PERFORM EXECUTE-FUNCTION.
ENDWHILE.
REFRESH R1.
ENDLOOP.
We need to check now for INCLUDES on DOWNLOAD when the INCLUDE
program itself is of type I. In this case the function call
will not return the INCLUDES. For example we could be
downloading ZTESTTOP (an Include itself) which as an include
ZTEST01.
The process fortunately is the same as the UPLOAD function
except of course we need to read the library instead of the
DOS directory
process INCLUDE modules for Upload
On upload the procedure is more complex as Includes within
Includes can only be resolved by scanning the code and
searching if the program exists in the directory.
To get all INCLUDES within INCLUDES entries in table I_INCL
that do not exist in I_INCLUDE are copied to table I_INCLUDE
after each entire pass of table i_INCLUDE and table is then
re-looped through. Programs in table I_INCLUDE that have already
been processed have a "Y" indicator set in I_INCLUDE-AVAIL.
if func = 'U'.
IF INCLUDES = 'Y'.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
WHILE W_ITERATE = 'Y'.
PERFORM PROCESS_INCLUDES_UL.
PERFORM LOOP_THROUGH.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
ENDWHILE.
endif.
ENDIF.
DESCRIBE TABLE I_INCLUDE LINES I.
IF I > 0.
SKIP 1.
WRITE: / ' Included Programs found'.
SKIP 1.
LOOP AT I_INCLUDE.
WRITE I_INCLUDE-NAME TO LINE(40).
CONDENSE LINE.
WRITE: / LINE(80).
ENDLOOP.
ENDIF.
/ Table R contains ABAP names to up / download. */
/ Loop through table R and perform up / download */
/ for each program. */
/ Table R1 contains INCLUDE names found (if any) */
/ As each */
FORM EXECUTE-FUNCTION.
LOOP AT R1.
MOVE-CORRESPONDING R1 TO R.
APPEND R.
ENDLOOP.
REFRESH R1.
LOOP AT R.
REFRESH : T, E1, H1, F1, S, U.
PERFORM PROCESS.
MOVE 'N' TO MAIN.
ENDLOOP.
REFRESH R.
DESCRIBE TABLE R1 LINES I.
ENDFORM.
/ Build file names for UP/DOWNLOAD */
/ 3 files are generated per ABAP. */
/ 1) ABAP Path\PROGNAME.EEE (ABAP, Attr,Texts) */
/ Logic Path\PROGNAME.EEE (Dynpro Source Logic) */
/ CUA Path\PROGNAME.EEE (CUA components - keys etc) */
/ 2) Header Path\PROGNAME.HHH (Dynpro Header) */
/ 3) Fields Path\PROGNAME.FFF (Dynpro Field definitions )*/
/ ( If alternate file name specified -DSNAME- this will */
/ be used instead. This is only valid for the main program. */
/ INCLUDED programs will have file names as specified */
/ above). */
/ By using this scheme it saves the user from having to */
/ be prompted for 3 file names. */
/ If you want multiple copies / versions on disk either */
/ rename the old versions or specify a different directory in */
/ the path parameter. */
FORM PROCESS.
MOVE PATH TO FN1.
CASE MAIN.
WHEN 'Y'.
IF DSNAME NE SPACE.
WRITE DSNAME TO FN1+66. "rel 4
ELSE.
WRITE R-NAME TO FN1+66. "rel 4
ENDIF.
WHEN OTHERS.
WRITE R-NAME TO FN1+66. "rel 4
ENDCASE.
MOVE FN1 TO FN2.
MOVE FN1 TO FN3.
WRITE '.HHH' TO FN1+124(4). "rel 4
WRITE '.FFF' TO FN2+124(4). "rel 4
WRITE '.EEE' TO FN3+124(4). "rel 4
CONDENSE FN1 NO-GAPS.
CONDENSE FN2 NO-GAPS.
CONDENSE FN3 NO-GAPS.
NAME = R-NAME.
CASE FUNC.
WHEN 'D'.
PERFORM DOWNLOAD_OBJECTS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been unloaded' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
DESCRIBE TABLE T LINES I.
IF I = 0.
WRITE: / 'No Dynpros were found for unload function'.
ELSE.
WRITE: / 'The following Dynpros have been unloaded : '.
PERFORM LOOP_THROUGH_T.
ENDIF.
WHEN 'U'.
PERFORM UPLOAD_OBJECTS.
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0.
WRITE: / 'No Dynpros were found for restore function'.
WHEN OTHERS.
WRITE: / 'The following Dynpros have been restored : '.
PERFORM LOOP_THROUGH_T.
ENDCASE.
IF MAIN EQ 'Y'.
CASE OLDNAME.
WHEN SPACE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
WHEN OTHERS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored - original name :'
TO LINE+55.
WRITE OLDNAME TO LINE+92.
CONDENSE LINE.
WRITE: / LINE.
ENDCASE.
ELSE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
ENDIF.
ENDCASE.
ENDFORM.
/ print progname + dynpro nrs that have been processed. */
FORM LOOP_THROUGH_T.
LOOP AT T.
CLEAR LINE.
WRITE R-NAME TO LINE.
WRITE T-NUMBER TO LINE+50.
CONDENSE LINE.
WRITE: / LINE.
ENDLOOP.
ENDFORM.
/ Download Objects */
FORM DOWNLOAD_OBJECTS.
PERFORM UNLOAD_ABAP. "ABAP source, texts, attr
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
IF TRDIR-SUBC = 'I'.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
ENDIF.
PERFORM UNLOAD_CUA. "CUA stuff
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
PERFORM BUILD_T. "Build table of all dynpros in ABAP
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0. "if no dynpros exist then cannot download any
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
WHEN OTHERS.
PERFORM UNLOAD_DYNPROS. "Get Raw dynpros from SAP
PERFORM UNLOAD_DYNPRO_COMPONENTS."Convert to table
PERFORM DOWNLOAD_DATA. "Download ABAP etc. to PC
PERFORM DOWNLOAD_BIN_H1. "Download dynpro header
PERFORM DOWNLOAD_BIN_F1. "Download dynpro fields
ENDCASE.
ENDFORM.
/ Split ABAP up into its component parts */
/ A) Program source (72) */
/ B) Texts (132) */
/ C) Attributes (117) */
/ D) CUA stuff (Various) */
FORM UNLOAD_ABAP.
/ Get ABAP language. Only required on download. */
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE TRDIR-RLOAD TO R-LANGUAGE.
READ REPORT R-NAME INTO S. "Get source into table S
MOVE '????SRCE' TO S-TXT.
INSERT S INDEX 1.
/ Text elements, Numbered texts, headings, selection texts */
/ Read text elements with logon language. If they don't */
/ exist read with the value taken from TRDIR. */
READ TEXTPOOL R-NAME INTO U LANGUAGE SY-LANGU.
IF SY-SUBRC NE 0.
READ TEXTPOOL R-NAME INTO U LANGUAGE R-LANGUAGE.
ENDIF.
DESCRIBE TABLE U LINES I.
CASE I.
WHEN 0.
WHEN OTHERS.
MOVE '????TEXT' TO S-TXT.
APPEND S.
LOOP AT U.
MOVE U-TXT TO S-TXT.
APPEND S.
DELETE U.
ENDLOOP.
ENDCASE.
/ Retrieve Attributes from TRDIR and add to table S */
/ Change language to logged on language */
MOVE '????ATTR' TO S-TXT.
APPEND S.
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE SY-LANGU TO TRDIR-RLOAD.
MOVE-CORRESPONDING TRDIR TO DIR.
MOVE DIR TO S-TXT.
APPEND S.
ENDFORM.
/ retrieve CUA stuff and append to table S. */
FORM UNLOAD_CUA.
MOVE R-NAME TO EU_KEY-NAME. "Program name for CUA
MOVE 'D' TO EU_KEY-SPRSL. "CUA seems to want D as lang
MOVE R-LANGUAGE TO EU_KEY-SPRSL. "Language "rel 2.2
IMPORT STA FUN MEN MTX ACT BUT PFK SET LAST INC STX DOC "rel 2.2
IMPORT STA STX FUN MEN MTX ACT BUT PFK SET LAST INC DOC "rel 3.0
ATT FDN MDN SYM FIN "rel 3.0
FROM DATABASE EUDB(CU) ID EU_KEY.
IF SY-SUBRC NE 0. "No statuses
EXIT.
ENDIF.
read titles in logged on language. If not present use
language from TRDIR.
CASE REL3.
WHEN SPACE. "(rel 4)
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = SY-LANGU.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = R-LANGUAGE.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
ENDIF.
DESCRIBE TABLE FTX LINES I.
IF I > 0.
MOVE '????FTXT' TO S-TXT.
APPEND S.
LOOP AT FTX.
MOVE FTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
WHEN OTHERS.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ SY-LANGU.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ R-LANGUAGE.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
ENDIF.
ENDCASE.
DESCRIBE TABLE STA LINES I.
IF I > 0.
MOVE '????STAT' TO S-TXT.
APPEND S.
LOOP AT STA.
MOVE STA TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FUN LINES I.
IF I > 0.
MOVE '????FUNC' TO S-TXT.
APPEND S.
LOOP AT FUN.
MOVE FUN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MEN LINES I.
IF I > 0.
MOVE '????MEN1' TO S-TXT.
APPEND S.
LOOP AT MEN.
MOVE MEN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MTX LINES I.
IF I > 0.
MOVE '????MTX1' TO S-TXT.
APPEND S.
LOOP AT MTX.
MOVE MTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE ACT LINES I.
IF I > 0.
MOVE '????ACTN' TO S-TXT.
APPEND S.
LOOP AT ACT.
MOVE ACT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE BUT LINES I.
IF I > 0.
MOVE '????BUTN' TO S-TXT.
APPEND S.
LOOP AT BUT.
MOVE BUT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE PFK LINES I.
IF I > 0.
MOVE '????PFKY' TO S-TXT.
APPEND S.
LOOP AT PFK.
MOVE PFK TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SET LINES I.
IF I > 0.
MOVE '????SETS' TO S-TXT.
APPEND S.
LOOP AT SET.
MOVE SET TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
IF LAST NE SPACE.
MOVE '????LIST' TO S-TXT.
APPEND S.
MOVE LAST TO S-TXT.
APPEND S.
ENDIF.
DESCRIBE TABLE INC LINES I.
IF I > 0.
MOVE '????INCL' TO S-TXT.
APPEND S.
LOOP AT INC.
MOVE INC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE STX LINES I.
IF I > 0.
MOVE '????STXT' TO S-TXT.
APPEND S.
LOOP AT STX.
MOVE STX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE DOC LINES I.
IF I > 0.
MOVE '????DOCN' TO S-TXT.
APPEND S.
LOOP AT DOC.
MOVE DOC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE TIT LINES I.
IF I > 0.
MOVE '????TITL' TO S-TXT.
APPEND S.
LOOP AT TIT.
MOVE TIT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
Next 5 tables are rel 3.0 specific (ATT, FDN, MDN, SYM, FIN)
DESCRIBE TABLE ATT LINES I.
IF I > 0.
MOVE '????VATT' TO S-TXT.
APPEND S.
LOOP AT ATT.
MOVE ATT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FDN LINES I.
IF I > 0.
MOVE '????VFDN' TO S-TXT.
APPEND S.
LOOP AT FDN.
MOVE FDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MDN LINES I.
IF I > 0.
MOVE '????VMDN' TO S-TXT.
APPEND S.
LOOP AT MDN.
MOVE MDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SYM LINES I.
IF I > 0.
MOVE '????VSYM' TO S-TXT.
APPEND S.
LOOP AT SYM.
MOVE SYM TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FIN LINES I.
IF I > 0.
MOVE '????VFIN' TO S-TXT.
APPEND S.
LOOP AT FIN.
MOVE FIN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
ENDFORM.
/ Upload Objects. */
FORM UPLOAD_OBJECTS.
PERFORM UPLOAD_EEE. "ABAP,texts,attr dynpro logic
DESCRIBE TABLE E1 LINES I.
IF I > 0. "Do dynpro components exist
PERFORM UPLOAD_HHH. "dynpro header
PERFORM UPLOAD_FFF. "dynpro fields.
PERFORM RECONSTRUCT_DYNPROS. "load + gen dynpros
ENDIF.
ENDFORM.
/ Build table containing dynpro names and numbers */
FORM BUILD_T.
SELECT * FROM D020S WHERE PROG EQ R-NAME.
T-NUMBER = D020S-DNUM.
T-NAME = D020S-PROG.
APPEND T.
ENDSELECT.
ENDFORM.
/ Split dynpros into constituent parts. */
FORM UNLOAD_DYNPROS.
MOVE 'Y' TO FIRST-TIME.
LOOP AT T.
REFRESH: F, E.
CLEAR: H, F, E.
PERFORM BUILD_HHH. "Dynpro Header
PERFORM BUILD_FFF. "Dynpro Fields
PERFORM BUILD_EEE_DYNP. "Dynpro Logic
ENDLOOP.
ENDFORM.
/ Header H length 284. */
FORM BUILD_HHH.
MOVE T-NAME TO DYNNAME(40). "rel 4.
MOVE T-NUMBER TO DYNNAME+40(4). "rel 4.
IMPORT DYNPRO H F E M ID DYNNAME.
MOVE T-NAME TO H1-NAME.
MOVE T-NUMBER TO H1-NUMBER.
MOVE-CORRESPONDING H TO H1.
APPEND H1.
ENDFORM.
/ Fields D021S Len 87. */
FORM BUILD_FFF.
MOVE T-NAME TO F1-NAME.
MOVE T-NUMBER TO F1-NUMBER.
LOOP AT F.
MOVE-CORRESPONDING F TO F1.
APPEND F1.
DELETE F.
ENDLOOP.
ENDFORM.
/ Dynpro Logic D022S E */
FORM BUILD_EEE_DYNP.
MOVE T-NAME TO E1-NAME.
MOVE T-NUMBER TO E1-NUMBER.
LOOP AT E.
MOVE-CORRESPONDING E TO E1.
APPEND E1.
DELETE E.
ENDLOOP.
ENDFORM.
/ Unload Constituent parts of dynpro. */
FORM UNLOAD_DYNPRO_COMPONENTS.
MOVE '????LOGC' TO S-TXT.
APPEND S.
LOOP AT E1.
MOVE E1 TO S-TXT.
APPEND S.
DELETE E1.
ENDLOOP.
FREE E1.
LOOP AT T.
MOVE 'N' TO FOUND.
SELECT SINGLE * FROM D020T "use logged on language
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU.
IF SY-SUBRC NE 0. "try original language.
SELECT SINGLE * FROM D020T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
ENDIF.
IF SY-SUBRC EQ 0.
IF FOUND = 'N'.
MOVE '????DTIT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE T-NAME TO S-TXT.
WRITE T-NUMBER TO S-TXT+8(4).
WRITE D020T-DTXT TO S-TXT+12(60).
APPEND S.
ENDIF.
MOVE 'N' TO FOUND.
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU. "logged on language
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS. "try original language
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
ENDCASE.
ENDLOOP.
ENDFORM.
/ Build the original dynpro component tables. */
/ Table H1 contains 1 entry for each dynpro. H1 contains */
/ the header for the dynpro prefixed by the program name */
/ and dynpro number. */
/ By looping round this table we can re-build the F */
/ (Fields) and E (Logic) components. By stripping off the */
/ program name and dynpro number the original tables are */
/ re-created. (Tables F1 and E1 also have a prefix of */
/ Program name and dynpro nr). */
/ After the original set of tables has been re-created we */
/ use R3 - SYSTEM-CALL (rel 2.2) to generate the screen */
/ and then get the next entry in table H1 to build the */
/ next screen. For releases 3.0 and higher use generate */
/ dynpro. */
FORM RECONSTRUCT_DYNPROS.
LOOP AT H1.
CASE MAIN.
WHEN 'Y'.
if h1-name ne repid.
IF H1-NAME NE R1-NAME.
MOVE H1-NAME TO OLDNAME.
ENDIF.
ENDCASE.
PERFORM RECONSTRUCT_F.
PERFORM RECONSTRUCT_E.
MOVE-CORRESPONDING H1 TO H.
IF MAIN = 'Y'.
move repid to h-prog.
MOVE R1-NAME TO H-PROG.
move repid to dynname.
MOVE R1-NAME TO DYNNAME.
ELSE.
MOVE H1-NAME TO H-PROG.
MOVE H1-NAME TO DYNNAME.
ENDIF.
MOVE H1-NUMBER TO H-DNUM.
WRITE H1-NUMBER TO DYNNAME+40(4).
EXPORT DYNPRO H F E M ID DYNNAME.
SYSTEM-CALL GENERATE-SCREEN DYNNAME. "Up to rel 2.2
GENERATE DYNPRO H F E M ID DYNNAME "R 3.0, 4.0, 4.5
MESSAGE DYNPRO_MESSAGE
LINE DYNPRO_LINE
WORD DYNPRO_WORD.
REFRESH: M, F, E.
CLEAR: M, H, F, E.
ENDLOOP.
ENDFORM.
/ Re-build Fields table */
FORM RECONSTRUCT_F.
LOOP AT F1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING F1 TO F.
APPEND F.
ENDLOOP.
ENDFORM.
/ Re-build Logic table */
FORM RECONSTRUCT_E.
LOOP AT E1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING E1 TO E.
APPEND E.
ENDLOOP.
ENDFORM.
/ scan for included files (Upload) */
FORM SCAN4-INCLUDES.
IF FUNC = 'D'. "Downloads - whole table needs to be scanned
LOOP AT S.
PERFORM SEARCH-FUNC.
ENDLOOP.
ENDIF.
IF FUNC = 'U'. "On upload scan line by line as we are re-building abap
PERFORM SEARCH-FUNC.
ENDIF.
ENDFORM.
/ scan for text INCLUDE xxxxxxxx */
/ reject INCLUDE STRUCTURE as structure not a valid */
/ program name */
FORM SEARCH-FUNC.
CONDENSE S-TXT.
SEARCH S-TXT FOR '.INCLUDE .'.
CASE SY-SUBRC.
WHEN 0.
IF S-TXT+8(9) EQ 'STRUCTURE'
OR S-TXT+8(9) EQ 'structure'
OR S-TXT+8(6) EQ '<ICON>' "rel 3.0c 3.0d
OR S-TXT+8(6) EQ '<icon>'
OR S-TXT+8(6) EQ '<type>'
OR S-TXT+8(6) EQ '<TYPE>'
OR S-TXT+8(9) EQ '<methods>'
OR S-TXT+8(9) EQ '<METHODS>'.
EXIT.
ENDIF.
IF SY-FDPOS EQ 0. "INCLUDE must be in pos 1 (by reason of condense)
PERFORM VALIDATE_INCLUDE.
ELSE.
EXIT.
ENDIF.
ENDCASE.
ENDFORM.
/ Validate INCLUDES . */
FORM VALIDATE_INCLUDE.
SEARCH S-TXT FOR '...' STARTING AT 9 ENDING AT 39.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS.
SEARCH S-TXT FOR '. .' STARTING AT 9 ENDING AT 38.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
ENDCASE.
IX = SY-FDPOS.
ASSIGN S-TXT+8(IX) TO <F>.
Now check for Include Mask for example if include mask was set to
Z* then only include programs whose first letter starts with a Z.
1) get length of the INCLUDE program name. Must be less than or
equal 40.
2) Compare it with the Include mask.
3) If Ok add include program name to include table
clear i_include.
move <f> to i_include-name.
CLEAR I_INCL.
SEARCH IMASK FOR '.*.'.
IF SY-SUBRC = 0.
CONDENSE IMASK.
ENDIF.
IF ( <F> CP IMASK OR IMASK = ' ' ).
READ TABLE I_INCL WITH KEY = <F>.
IF SY-SUBRC NE 0.
MOVE <F> TO I_INCL-NAME.
move 1 to i_include-count.
collect i_include.
APPEND I_INCL.
ENDIF.
ENDIF.
ENDFORM.
/ Download table S. */
FORM DOWNLOAD_DATA.
CLEAR TXLINE.
WRITE 'Downloading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+12.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
TABLES
DATA_TAB = S.
ENDFORM.
/ Download Binary files H1 */
FORM DOWNLOAD_BIN_H1.
DESCRIBE FIELD H1 LENGTH J.
DESCRIBE TABLE H1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = H1.
ENDFORM.
/ Download Binary files F1 */
FORM DOWNLOAD_BIN_F1.
DESCRIBE FIELD F1 LENGTH J.
DESCRIBE TABLE F1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = F1.
ENDFORM.
/ Upload data from file .EEE */
FORM UPLOAD_EEE.
CLEAR TXLINE.
WRITE 'Uploading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+10.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
MOVE 'Y' TO FIRST-TIME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = S1.
LOOP AT S1.
IF S1-TXT(4) = '????'.
MOVE S1-TXT(8) TO NEW-FUNC.
IF FIRST-TIME = 'Y'.
MOVE S1-TXT(8) TO OLD-FUNC.
MOVE 'N' TO FIRST-TIME.
ELSE.
PERFORM STORE_COMPONENT.
MOVE NEW-FUNC TO OLD-FUNC.
ENDIF.
ENDIF.
IF S1-TXT(4) NE '????'.
PERFORM REBUILD-COMPONENT.
ENDIF.
ENDLOOP.
PERFORM STORE_COMPONENT. "last component still to be processed
PERFORM REBUILD-CUA. "re-build CUA, statuses, pfk etc
ENDFORM.
/ Upload Dynpro headers (HHH) and fields (FFF) */
/ titles and dynpro logic is contained in file .EEE */
/ and has already been processed. */
FORM UPLOAD_HHH.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H2.
LOOP AT H2.
MOVE H2-CNAME TO H1-NAME.
MOVE H2-CNUM TO H1-NUMBER.
MOVE H2-NNAME TO H1-PROG.
MOVE H2-NNUM TO H1-DNUM.
MOVE H2-CTIM TO H1-TGEN.
WRITE '19' TO H1-DGEN(2).
WRITE H2-CDAT TO H1-DGEN+2(6).
WRITE H2-FILL TO H1+88(39).
APPEND H1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H1.
ENDCASE.
LOOP AT H1.
MOVE H1-NAME TO T-NAME.
MOVE H1-NUMBER TO T-NUMBER.
APPEND T.
ENDLOOP.
ENDFORM.
/ Upload Binary file F1 - Dynpro fields */
FORM UPLOAD_FFF.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F2.
LOOP AT F2.
OLD_F1 = F2.
APPEND OLD_F1.
ENDLOOP.
LOOP AT OLD_F1.
MOVE-CORRESPONDING OLD_F1 TO F1.
APPEND F1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F1.
ENDCASE.
ENDFORM.
/ Re-construct data from file .EEE */
FORM REBUILD-COMPONENT.
CASE OLD-FUNC.
WHEN '????LOGC'. "Dynpro LOGIC.
CASE REL3.
WHEN 'X'.
SHIFT S1-TXT+8 RIGHT BY 32 PLACES.
ENDCASE.
MOVE S1-TXT TO E1.
APPEND E1.
/ Load ABAP Source code, CUA, pfkeys etc to int tables */
WHEN '????SRCE'.
MOVE S1-TXT TO S-TXT.
APPEND S.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
if restoring / uploading rel 3.1 or lower different cua tables
are used. At generate CUA time these will be converted by the
system to rel 4.0
WHEN '????STAT'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_STA.
APPEND OLD_STA.
WHEN SPACE.
MOVE S1-TXT TO STA.
APPEND STA.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????FUNC'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_FUN.
APPEND OLD_FUN.
WHEN SPACE.
MOVE S1-TXT TO FUN.
APPEND FUN.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????MEN1'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_MEN.
APPEND OLD_MEN.
WHEN SPACE.
MOVE S1-TXT TO MEN.
APPEND -
Report for downloading the source code of a Program
Hi.
Need a code to download the source code of a Program in a text file and all the includes of that program in a separate coressponding files. <b>This should be with scan and read report statements.It should be with classe CL_GUI_FRONTEND_SERVICES but not with function modules.</b>
Thanks in advance.
Regards,
AshaHi Asha
Use the below program for your purpose.
Report: ZKBPROGS *
Function : Up/Download ABAP reports complete with texts *
Change Log : *
July 5, 1999 *
- Combined existing programs that did the upload and download into*
- one program. *
- Changed format that the reports are saved in to be compatible *
with Wolfgang Morgenthaler's upload/download program(YSTRASN00 *
at www.antarcon.de). Major differences between this program and*
Wolfgang's are:
- this program does not update TRDIR with the *
TRDIR entries that are in the program uploaded. Instead, *
current users stats are used. *
- this program allows selection of reports from a list or *
a single report can be tuped in and uploaded *
- this program also updates TADIR so that a development class*
is assigned to the program *
- this program checks to see if the program already has a *
TRDIR entry, and if it does, warns the user *
- this program will save/restore the program documenation too*
REPORT ZKBPROGS
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Declare Database Objects *
tables:
DOKIL,
TRDIR.
Constants*
CONSTANTS:
MC_TRDIR_IDENTIFIER(72) TYPE C VALUE '%&%& RDIR',
MC_REPORT_IDENTIFIER(72) TYPE C VALUE '%&%& REPO',
MC_TEXT_IDENTIFIER(72) TYPE C VALUE '%&%& TEXP',
MC_THEAD_IDENTIFIER(72) TYPE C VALUE '%&%& HEAD',
MC_DOC_IDENTIFIER(72) TYPE C VALUE '%&%& DOKL',
MC_TRDIR_SHORT(4) TYPE C VALUE 'RDIR',
MC_REPORT_SHORT(4) TYPE C VALUE 'REPO',
MC_TEXT_SHORT(4) TYPE C VALUE 'TEXP',
MC_THEAD_SHORT(4) TYPE C VALUE 'HEAD',
MC_DOC_SHORT(4) TYPE C VALUE 'DOKP'.
Declare Module level data structures *
DATA: BEGIN OF MTAB_PROGRAM_SOURCE OCCURS 0,
LINE(72) TYPE C,
END OF MTAB_PROGRAM_SOURCE.
DATA: MTAB_PROGRAM_TRDIR LIKE TRDIR OCCURS 0 WITH HEADER LINE.
DATA: MTAB_PROGRAM_TEXTS LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
DATA: MSTR_THEAD LIKE THEAD.
DATA: BEGIN OF MTAB_PROGRAM_FILE OCCURS 0,
LINE(275) TYPE C,
END OF MTAB_PROGRAM_FILE.
DATA: BEGIN OF MTAB_DIRECTORY OCCURS 0,
NAME LIKE TRDIR-NAME,
DESC(72) TYPE C,
SAVENAME LIKE RLGRAP-FILENAME,
END OF MTAB_DIRECTORY.
DATA: BEGIN OF MTAB_PROGRAM_DOCUMENTATION OCCURS 0,
LINE(255) TYPE C,
END OF MTAB_PROGRAM_DOCUMENTATION.
Selection Screen *
*-- Options for upload/download of programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_OPTIONS WITH FRAME TITLE TEXT-UDL.
PARAMETERS:
RB_DOWN RADIOBUTTON GROUP UDL DEFAULT 'X'. " Download reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_TRDIR WITH FRAME TITLE TEXT-DIR.
SELECT-OPTIONS:
S_NAME FOR TRDIR-NAME, " Program Name
S_SUBC FOR TRDIR-SUBC " Program Type
DEFAULT 'F' OPTION EQ SIGN E," Exclude Functions by default
S_CNAM FOR TRDIR-CNAM " Created by
DEFAULT SY-UNAME,
S_UNAM FOR TRDIR-UNAM, " Last Changed by
S_CDAT FOR TRDIR-CDAT, " Creation date
S_UDAT FOR TRDIR-UDAT. " Last update date
SELECTION-SCREEN END OF BLOCK FRM_TRDIR.
*-- Options for uploading programs
PARAMETERS:
RB_UP RADIOBUTTON GROUP UDL. " Upload reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_UPLOAD WITH FRAME TITLE TEXT-UPL.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(29) TEXT-SNG.
PARAMETERS:
RB_FILE RADIOBUTTON GROUP HOW DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(42) TEXT-FNA.
SELECTION-SCREEN END OF LINE.
PARAMETERS:
RB_LIST RADIOBUTTON GROUP HOW.
SELECTION-SCREEN END OF BLOCK FRM_UPLOAD.
SELECTION-SCREEN END OF BLOCK FRM_OPTIONS.
*-- Options for up/downloading programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_FILEN WITH FRAME TITLE TEXT-FIL.
PARAMETERS:
RB_DOS RADIOBUTTON GROUP FIL DEFAULT 'X', " Save to local
RB_UNIX RADIOBUTTON GROUP FIL, " Save to UNIX
P_PATH LIKE RLGRAP-FILENAME " Path to save files to
DEFAULT 'c:\temp\'.
SELECTION-SCREEN END OF BLOCK FRM_FILEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-LOW.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-LOW
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-LOW
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-HIGH.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-HIGH
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-HIGH
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-LOW.
PERFORM GET_NAME USING 'S_UNAM-LOW'
CHANGING S_UNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-HIGH.
PERFORM GET_NAME USING 'S_UNAM-HIGH'
CHANGING S_UNAM-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-LOW.
PERFORM GET_NAME USING 'S_CNAM-LOW'
CHANGING S_CNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-HIGH.
PERFORM GET_NAME USING 'S_CNAM-HIGH'
CHANGING S_CNAM-HIGH.
TOP-OF-PAGE.
IF RB_LIST = 'X'.
FORMAT COLOR COL_HEADING.
NEW-LINE.
WRITE: AT 3 TEXT-H01,
AT 15 TEXT-H03.
FORMAT COLOR OFF.
ENDIF.
AT LINE-SELECTION.
CHECK RB_LIST = 'X'. " only do in list mode
READ LINE SY-CUROW FIELD VALUE MTAB_DIRECTORY-SAVENAME.
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING MTAB_DIRECTORY-SAVENAME.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
Start of processing *
START-OF-SELECTION.
FORMAT COLOR COL_NORMAL.
IF RB_DOWN = 'X'.
PERFORM DOWNLOAD_REPORTS.
ELSEIF RB_UP = 'X'.
PERFORM UPLOAD_REPORTS.
ENDIF.
END-OF-SELECTION.
IF RB_DOWN = 'X'.
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_DIRECTORY
USING P_PATH.
ENDIF.
FORM UPLOAD_REPORTS *
FORM UPLOAD_REPORTS.
*-- Can upload a reports entered in selection criteria or
*-- select from a list. List can be from index.txt in same directory
*-- (created by the download) or by reading the first line of each file
*-- in the directory.
IF RB_FILE = 'X'. " Upload single program from a file
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING P_PATH.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
ELSEIF RB_LIST = 'X'. " Show list for user to choose from
*-- get list of report names/descriptions from directory text
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_DIRECTORY
USING P_PATH.
SORT MTAB_DIRECTORY.
*-- Write out list of report names/descriptions
LOOP AT MTAB_DIRECTORY.
WRITE:
/ MTAB_DIRECTORY-NAME UNDER TEXT-H01,
MTAB_DIRECTORY-DESC UNDER TEXT-H03,
MTAB_DIRECTORY-SAVENAME.
ENDLOOP.
*-- Process user selections for reports to upload.
ENDIF.
ENDFORM. " upload_reports
FORM DOWNLOAD_REPORTS *
From the user selections, get all programs that meet the *
criteria, and save them in ftab_program_directory. *
Also save the report to disk. *
FORM DOWNLOAD_REPORTS.
DATA:
LC_FULL_FILENAME LIKE RLGRAP-FILENAME.
*-- The table is put into an internal table because the program will
*-- abend if multiple transfers to a dataset occur within a SELECT/
*-- ENDSELCT (tested on 3.1H)
SELECT * FROM TRDIR
INTO TABLE MTAB_PROGRAM_TRDIR
WHERE NAME IN S_NAME
AND SUBC IN S_SUBC
AND CNAM IN S_CNAM
AND UNAM IN S_UNAM
AND CDAT IN S_CDAT
AND UDAT IN S_UDAT.
LOOP AT MTAB_PROGRAM_TRDIR.
*-- Clear out text and source code tables
CLEAR:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
REFRESH:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
*-- Get the report
READ REPORT MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_SOURCE.
*-- Get the text for the report
READ TEXTPOOL MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_TEXTS.
*-- Get the documentation for the report
CLEAR DOKIL.
SELECT * UP TO 1 ROWS FROM DOKIL
WHERE ID = 'RE'
AND OBJECT = MTAB_PROGRAM_TRDIR-NAME
AND LANGU = SY-LANGU
AND TYP = 'E'
ORDER BY VERSION DESCENDING.
ENDSELECT.
*-- Documentation exists for this object
IF SY-SUBRC = 0.
CALL FUNCTION 'DOCU_READ'
EXPORTING
ID = DOKIL-ID
LANGU = DOKIL-LANGU
OBJECT = DOKIL-OBJECT
TYP = DOKIL-TYP
VERSION = DOKIL-VERSION
IMPORTING
HEAD = MSTR_THEAD
TABLES
LINE = MTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ENDIF.
*-- Put the report code and texts into a single file
*-- Put the identifier line in so that the start of the TRDIR line
*-- is marked
CONCATENATE MC_TRDIR_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the TRDIR line
MTAB_PROGRAM_FILE-LINE = MTAB_PROGRAM_TRDIR.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report code
*-- is marked
CONCATENATE MC_REPORT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report code
LOOP AT MTAB_PROGRAM_SOURCE.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_SOURCE.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the report text
*-- is marked
CONCATENATE MC_TEXT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report texts
LOOP AT MTAB_PROGRAM_TEXTS.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_TEXTS.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the THEAD record
*-- is marked
CONCATENATE MC_THEAD_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
MTAB_PROGRAM_FILE = MSTR_THEAD.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report
*-- documentation is marked
CONCATENATE MC_DOC_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report documentation
LOOP AT MTAB_PROGRAM_DOCUMENTATION.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_DOCUMENTATION.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Make the fully pathed filename that report will be saved to
CONCATENATE P_PATH
MTAB_PROGRAM_TRDIR-NAME
'.txt'
INTO LC_FULL_FILENAME.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_PROGRAM_FILE
USING LC_FULL_FILENAME.
*-- Write out message with Program Name/Description
READ TABLE MTAB_PROGRAM_TEXTS WITH KEY ID = 'R'.
IF SY-SUBRC = 0.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = MTAB_PROGRAM_TEXTS-ENTRY.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME,
MTAB_PROGRAM_TEXTS-ENTRY(65) COLOR COL_HEADING.
ELSE.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = 'No description available'.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME.
ENDIF.
ENDLOOP.
ENDFORM. " BUILD_PROGRAM_DIRECTORY
FORM SAVE_TABLE_TO_FILE *
--> FTAB_TABLE *
--> F_FILENAME *
FORM SAVE_TABLE_TO_FILE TABLES FTAB_TABLE
USING F_FILENAME.
IF RB_DOS = 'X'. " Save file to presentation server
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
OTHERS = 4.
IF SY-SUBRC NE 0.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ELSE. " Save file to application server
OPEN DATASET F_FILENAME FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC = 0.
LOOP AT FTAB_TABLE.
TRANSFER FTAB_TABLE TO F_FILENAME.
IF SY-SUBRC NE 0.
WRITE: / 'Error writing record to file;' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDLOOP.
ELSE.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDIF. " End RB_DOS
ENDFORM. " SAVE_PROGRAM
FORM READ_REPORT_FROM_DISK *
Read report into internal table. Can read from local or *
remote computer *
FORM READ_REPORT_FROM_DISK TABLES FTAB_TABLE
USING F_FILENAME.
DATA:
LC_MESSAGE(128) TYPE C.
CLEAR FTAB_TABLE.
REFRESH FTAB_TABLE.
IF RB_DOS = 'X'.
TRANSLATE F_FILENAME USING '/\'. " correct slash for Dos PC file
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
IF SY-SUBRC >< 0.
WRITE: / 'Error reading file from local PC' COLOR COL_NEGATIVE.
ENDIF.
ELSEIF RB_UNIX = 'X'.
TRANSLATE F_FILENAME USING '\/'. " correct slash for unix
OPEN DATASET F_FILENAME FOR INPUT MESSAGE LC_MESSAGE IN TEXT MODE.
IF SY-SUBRC = 0.
DO.
READ DATASET F_FILENAME INTO FTAB_TABLE.
IF SY-SUBRC = 0.
APPEND FTAB_TABLE.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET F_FILENAME.
ELSE.
WRITE: / 'Error reading file from remote computer'
COLOR COL_NEGATIVE,
/ LC_MESSAGE,
/ F_FILENAME.
SY-SUBRC = 4.
ENDIF.
ENDIF.
ENDFORM. " READ_REPORT_FROM_DISK
FORM SPLIT_INCOMING_FILE *
--> FTAB_PROGRAM_FILE *
--> FTAB_PROGRAM_SOURCE *
--> ` *
--> FTAB_PROGRAM_TEXTS *
FORM SPLIT_INCOMING_FILE TABLES FTAB_PROGRAM_FILE
STRUCTURE MTAB_PROGRAM_FILE
FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
CHANGING FSTR_TRDIR
FSTR_THEAD.
DATA:
LC_DATATYPE(4) TYPE C, " Type of data, REPO, TEXP, RDIR
LC_PROGRAM_FILE LIKE MTAB_PROGRAM_FILE.
LOOP AT FTAB_PROGRAM_FILE.
LC_PROGRAM_FILE = FTAB_PROGRAM_FILE.
CASE LC_PROGRAM_FILE(9).
WHEN MC_TRDIR_IDENTIFIER.
LC_DATATYPE = MC_TRDIR_SHORT.
WHEN MC_REPORT_IDENTIFIER.
LC_DATATYPE = MC_REPORT_SHORT.
WHEN MC_TEXT_IDENTIFIER.
LC_DATATYPE = MC_TEXT_SHORT.
WHEN MC_DOC_IDENTIFIER.
LC_DATATYPE = MC_DOC_SHORT.
WHEN MC_THEAD_IDENTIFIER.
LC_DATATYPE = MC_THEAD_SHORT.
WHEN OTHERS. " Actual contents of report, trdir, or text
CASE LC_DATATYPE.
WHEN MC_TRDIR_SHORT.
FSTR_TRDIR = FTAB_PROGRAM_FILE.
WHEN MC_REPORT_SHORT.
FTAB_PROGRAM_SOURCE = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_SOURCE.
WHEN MC_TEXT_SHORT.
FTAB_PROGRAM_TEXTS = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_TEXTS.
WHEN MC_THEAD_SHORT.
FSTR_THEAD = FTAB_PROGRAM_FILE.
WHEN MC_DOC_SHORT.
FTAB_PROGRAM_DOCUMENTATION = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_DOCUMENTATION.
ENDCASE.
ENDCASE.
ENDLOOP.
ENDFORM. " SPLIT_INCOMING_FILE
FORM INSERT_NEW_REPORT*
--> FTAB_PROGRAM_SOURCE *
--> FTAB_PROGRAM_TEXTS *
--> F_TRDIR *
FORM INSERT_NEW_REPORT TABLES FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
USING FSTR_TRDIR LIKE TRDIR
FSTR_THEAD LIKE MSTR_THEAD.
DATA:
LC_OBJ_NAME LIKE E071-OBJ_NAME,
LC_LINE2(40) TYPE C,
LC_ANSWER(1) TYPE C.
*-- read trdir to see if the report already exists, if it does, prompt
*-- user to overwrite or abort.
SELECT SINGLE * FROM TRDIR WHERE NAME = FSTR_TRDIR-NAME.
IF SY-SUBRC = 0. " Already exists
CONCATENATE 'want to overwrite report'
FSTR_TRDIR-NAME
INTO LC_LINE2 SEPARATED BY SPACE.
CONCATENATE LC_LINE2
INTO LC_LINE2.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
DEFAULTOPTION = 'N'
TEXTLINE1 = 'The selected report already exists, do you'
TEXTLINE2 = LC_LINE2
TITEL = 'Report already exists'
CANCEL_DISPLAY = SPACE
IMPORTING
ANSWER = LC_ANSWER
EXCEPTIONS
OTHERS = 1.
ELSE.
LC_ANSWER = 'J'.
ENDIF.
IF LC_ANSWER = 'J'.
*-- Create the TADIR entry. (TRDIR entry created by INSERT REPORT)
LC_OBJ_NAME = TRDIR-NAME.
CALL FUNCTION 'TR_TADIR_POPUP_ENTRY_E071'
EXPORTING
WI_E071_PGMID = 'R3TR'
WI_E071_OBJECT = 'PROG'
WI_E071_OBJ_NAME = LC_OBJ_NAME
WI_TADIR_DEVCLASS = '$TMP'
EXCEPTIONS
EXIT = 3
OTHERS = 4.
IF SY-SUBRC = 0.
*-- Create Report
INSERT REPORT FSTR_TRDIR-NAME FROM FTAB_PROGRAM_SOURCE.
*-- Create Texts
INSERT TEXTPOOL FSTR_TRDIR-NAME FROM FTAB_PROGRAM_TEXTS
LANGUAGE SY-LANGU.
*-- Save Documentation
CALL FUNCTION 'DOCU_UPDATE'
EXPORTING
HEAD = FSTR_THEAD
STATE = 'A'
TYP = 'E'
VERSION = '1'
TABLES
LINE = FTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE: / 'Error updating the TADIR entry' COLOR COL_NEGATIVE,
'Program' COLOR COL_NEGATIVE INTENSIFIED OFF,
FSTR_TRDIR-NAME, 'was not loaded into SAP.'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ELSE.
WRITE: / FSTR_TRDIR-NAME COLOR COL_NEGATIVE,
'was not uploaded into SAP. Action cancelled by user'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ENDFORM. " INSERT_NEW_REPORT
FORM GET_NAME *
--> VALUE(F_FIELD) *
--> F_NAME *
FORM GET_NAME USING VALUE(F_FIELD)
CHANGING F_NAME.
DATA: LTAB_FIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
LC_PROG LIKE D020S-PROG,
LC_DNUM LIKE D020S-DNUM.
TRANSLATE F_FIELD TO UPPER CASE.
refresh ltab_fields.
LTAB_FIELDS-FIELDNAME = F_FIELD.
append ltab_fields.
LC_PROG = SY-REPID .
LC_DNUM = SY-DYNNR .
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = LC_PROG
DYNUMB = LC_DNUM
TABLES
dynpfields = ltab_fields
EXCEPTIONS
OTHERS = 01.
read table ltab_fields index 1.
IF SY-SUBRC EQ 0.
F_NAME = LTAB_FIELDS-FIELDVALUE.
refresh ltab_fields.
ENDIF.
CALL FUNCTION 'F4_USER'
EXPORTING
OBJECT = F_NAME
IMPORTING
RESULT = F_NAME.
ENDFORM. " GET_NAME
Regards,
Sree -
How to find the foreign function source code of srw.user_exit in report?
Hi,
We know that srw.user_exit can invoke a foreign function,for example SRW.USER_EXIT('FND SRWINIT').
But how can I find the source code of the foreign function in SRW.USER_EXIT(e.g. the source code of FND SRWINIT)?
Thanks in advance,Hi,
You build user exits when you want to pass control from Report Builder to a program you have written, which performs some function, and then returns control
to Report Builder.
So you will have to know the foreign function you want to invoke.
For information on writing a user exit, see the following note on Metalink:
179324.1
And the "Programmer's Guide to the Oracle Precompilers, 1.8"
Navneet. -
Issues with Exporting to Report Definition File
Post Author: dcasper70
CA Forum: Exporting
We just notices a strange thing happening when exporting to a report definition file. Hoping someone can explain it and/or offer us some kind of solution. We're currently about 25 deep into an extensive documentation phase involving 500+ reports, and just noticed this issue.
We assumed that ALL formulas that are being used in the report should be written out to the report definition file, either in section 4.0 (Formulas) or section 4.3 (Other Formulas). We have now noticed that in most reports this is not occurring.
In fact, in almost all cases, the RDF section 4.0 is completely blank, and section 4.3 has only a small fraction of the formulas in the report!!!
Is there some export option that we haven't found? Some setting somewhere we need to look into??? Does any detailed documentation on this type of exporting exist that someone can point us to?
Most search results that we've come across have implied or directly stated that ALL formulas/parameters/objects/etc will be exported. This clearly is not the case in our experience.
Someone please show me that I'm just missing something simple!!!!!
Running Crystal 10.0.0.533,
Database type = Oracle Server
Table Type = Stored ProcedurePost Author: JohnLouis
CA Forum: Exporting
Most likely, that is how it works, check out this article
http://www.bridgebuilder.com/bb_documents/newsletters/2003/08-03%20newsletter.pdf
Only formulas that are inserted directly in the report are reported, not referenced ones, or those contained within a text box. I have found ReportMiner, CrystalKleen and .rpt Inspector Professional Suite, but have not used any of them. If you try these, let me know if it works for what you are doing, I may need to do the same soon. -
About unprotect a report program's source code
Hi all,
I have protect the report program using a report program. In this process if i change/display a report program it doesn't displays its source code but it execute that program.The whole source code is Stored in an internal table.but the real problem is that when i open that program's source code it protected and doesn't appears.
I doing this by using '*@#@@[SAP]'. This is provided by SAP to protect a report program.
Now my query is ' there is any thing to unprotected that program' ?
Suggest.
Thanks
Sanket sethi.> <i>This is provided by SAP to protect a report program.</i>
That is an <u>incorrect</u> statement. That "feature" might be removed without any prior notice since it's causing more harm than it provides benefit. -
Waiting for aging report source code
Hi,
Please give the source code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.Look at transaction S_ALR_87012178.
Send the cash to Eric.
Regards -
How to set database location in the crystal report X1 from the Source code.
Dear All,
I am using Crystal report X1 for report generation.Now I am setting the database location manually in the crystal report. How can I Set the database location from the Source code.
Awaiting for your reply.
Thanks in advance.
Regards,
Rahaneef THere's a routine that also searches for subreports to set the log on info. Simply remove that aprt to set the main report logon info:
IDatabaseTablePtr pTable;
//get first table
pTable = m_Report->Database->Tables->GetItem(1) ;
long lTableCount = m_Report->Database->Tables->Count;
for( long lTable=1; lTable<=lTableCount; lTable++ )
pTable = m_Report->Database->Tables->GetItem(lTable);
pTable->ConnectionProperties->DeleteAll();
pTable->ConnectionProperties->Add("DSN", "Name of your DSN");
pTable->ConnectionProperties->Add("Database", "Demo");
pTable->ConnectionProperties->Add("Password", "sa");
pTable->ConnectionProperties->Add("User ID", "1Oem2000");
// Log on the tables of the subreports.
long lSectionCount = m_Report->Sections->Count;
for( long lSection=1; lSection<=lSectionCount; lSection++ )
ISectionPtr pSection = m_Report->Sections->Item[lSection];
long lSubreportCount = pSection->ReportObjects->Count;
for( long lSubreport=1; lSubreport<=lSubreportCount; lSubreport++ )
IReportObjectPtr pSubreportObject = pSection->ReportObjects->Item[lSubreport];
CRObjectKind crObjectKind;
pSubreportObject->get_Kind(&crObjectKind);
if( crObjectKind == crSubreportObject )
ISubreportObjectPtr SubReportPtr = pSubreportObject;
IReportPtr pSubReport = SubReportPtr->OpenSubreport();
long lTableCount = pSubReport->Database->Tables->Count;
for( long lTable=1; lTable<=lTableCount; lTable++ )
pTable = m_Report->Database->Tables->GetItem(lTable);
pTable->ConnectionProperties->DeleteAll();
//pTable->ConnectionProperties->Add("DSN", "dwcb12003");
pTable->ConnectionProperties->Add("Database", "CrystalEport_DB");
pTable->ConnectionProperties->Add("Password", "sa");
pTable->ConnectionProperties->Add("User ID", "1Oem2000");
If that doesn't work you need to tell us what is the error you are getting and paste in the code you are using. -
Create Global Class Definition using Local Class Source Code
I would like to be able to automate the creation of global class definitions using source code that is defined in a text file (one example: convert a local class def to a global class def).
Does SAP deliver this functionality? (I'm already aware of the various classes that can be used to create global classes and how those classes can be implemented in a program to generate new classes. I'm hoping to avoid having to create a custom solution.)
Thanks in advance!We have a winner!
Thanks Rich!
It's not a 100% solution - I was hoping to be able to generate global classes/interfaces using source code alone, without requiring user intervention.
It <i>is</i> however, a 90-95% solution because debugging SE24 reveals that by using a combination of the FM's SCAN_ABAP_OBJECTS_CLASSES & SEO_CLIF_MULTI_IMPORT, I should be able to <u>quickly</u> put together that custom application that I was trying to avoid.
I knew about the existance of SEO_CLIF_MULTI_IMPORT but I did not know about SCAN_ABAP_OBJECTS_CLASSES. I'm very happy to learn that I'm not going to have to write a parser! -
Source Code error for Report Shipping
Hello,
This is regarding Report Shipping.
As per SAP Report Shipping Implementation Guide
for 4.1Settings for the SD Interface: Shipping Docu-ments
Under Environment, Health & Safety> Product Safety> Report Shipping> Basic Settings for Shipping from SD Documents> Material Safety Data Sheet/Sales and Distribution Interface> Settings for the SD Interface: Shipping Documents> Output Determination--> Check Conditions.. it should be like below
Routine number: <26>
Description: Environmentally rlvt
Active: X (set)
Application: V2
Source code:
FORM KOBED_<Key>.
SY-SUBRC = 0.
CHECK KOMPB V2 -KZUMW IS INITIAL.
SY-SUBRC = 4.
ENDFORM.
FORM KOBEV_<Key>.
SY-SUBRC = 0.
CHECK KOMPB V2 -KZUMW IS INITIAL.
SY-SUBRC = 4.
ENDFORM
on the other had, i have check 2-3 standard Systems,
same for Settings for the SD Interface: Shipping Documents> Output Determination> Check Conditions..
it is like below
Routine number: <26>
Description: Environmentally rlvt
Active: X (set)
Application: V1
Source code:
FORM KOBED_<Key>.
SY-SUBRC = 0.
CHECK KOMPB V1 -KZUMW IS INITIAL.
SY-SUBRC = 4.
ENDFORM.
FORM KOBEV_<Key>.
SY-SUBRC = 0.
CHECK KOMPB V1 -KZUMW IS INITIAL.
SY-SUBRC = 4.
ENDFORM
so which one is Correct? Implementation Guide or Standard Setting of System.
Please guide me.
Edited by: Amol Joshi on Dec 29, 2010 4:42 PMHi Amol.
Both are correct.
The MSDS can be send with the sales order (V1) or with the delivery (V2), it depends of the logistic process configured in the system.
In SD the delivery may or may not be configured.
If the delivery is configured selects V2, in the other cases V1.
Regards.
JCD -
Hi,
I'm new in ABAP development. What is the fastest way to save the ABAP program source code?? Most of my program has dependency with other. I don't want to export it one by one in ABAP editor. Any suggestion??
Regards,
Kitsaving it in a package will ensure that you have a backup if something happens to the program
however if something happens to the server, then both the copies will be lost
a more complete approach would be to save it in a request, release the request and take the generated files with you (keep it on your personal PC for example)
1. go to tcode se80 and create a package
2. when it prompts to save create a new request and save this number
3. enter description and click on save and then ok
4. now go to se38 and create your program (or use the one you wish to backup) and assign the package created above and put the same request number
5. if the program already exists and is assigned to a local object/different package, then follow the path goto-> object directory entry and put the above created package and request number
6. go to tcode se09 and make sure that modifiable and released are checked and click on display
7. Do the syntax check and consistency checks on the requests and release
8. go to tcode cg3y and download the data and CO files to your local pc from the following paths.
--> Data: E:\usr\sap\trans\data\R903789.IEC
--> CO: E:\usr\sap\trans\cofiles\K903789.IEC
Ensure that your request is not a local request
ie: when the request is filled, the 'Target' field should be filled
If the search help does not return any results, you will need to contact your Basis team to allow you to create such a request
Also, the name I gave in the previous post was just an example
the format is...
Data file -> R<request number>.<system id>
Co file -> K<request number>.<system id>
This is for importing
9. Go to the Sever in which the request is to be imported
10. Go to transaction CG3Z and upload the data and co files to the respective folders on that server
11. Go to transaction STMS
12. Go to Overview -> Imports
13. Double click on the system (eg: CE6) <-- your sysid
14. Go to Extras -> Other Requests -> Add
15. Choose the request number (which will be the same as the one you created in the old server) and click on Ok
16. If a similar message is displayed as follows, click on Yes
Transport request IECK903 attach to import queue CE6
17. Your request number will get added to the list
18. Select it and go to Request -> Import
19. Choose your client (same as client on the current server) (you can fiddle with other options in the Options tab
20. Click on Ok and if a similar message is shown as follows, click on Yes
The import is being executed with the following options
Asynchronous:
Leave transport request in queue
Import transport request IECK903789 into system CE6
client 100?
21. A Truck symbol will be shown in the Status column
22. Click on Refresh till the truck changes to a yellow triangle
23. Right click on the request and click on logs to view any errors or messages
24. If no errors then transport is successful
Regards,
Chandru
Maybe you are looking for
-
The full error message is the following: XML Parsing Error: Undefined entity Location chrome://mozapps/content/downloads/unknown content type.xul Line Number 30, Column 18
-
When I open my hotmail or a website with FF and try to copy and paste to a MS Works document it tells me that MSWorks has stopped working and the availabe options only shut off MS Works. When I do the same thing with IE9 it copies and pastes just fin
-
When I open an application there is no dot in the dock.How do I get it back
When I open apps there is no longer a black dot in the dock. How do I get it to show up?
-
Problem loading data in cube 0REFX_C03
Hi all, Has anyone had problem with loading data to 0REFX_C03 cube? I am trying to load, but it just takes too long(predicted time of 10 days!!) and times out after a while.. Please advise if anyone has got any suggestions.. Thank you. Edited by: Sha
-
I can see songs on my iphone but can not see them in itunes
I have the IOS 7 and iphone is a 4. I can see songs on my iphone but cannot see them on itunes. I want to be able to see them so that I can move them to a playlist. thanks for any help.