Exporting SD DV to FLV - pan has horizontal blink

Hello all,
Source: SD DV, VOB - DV
Premiere CS4
I have encountered this problem. I'm trying to export my project to an FLV file in many various settings. Everything was quite all right except some pan shots, shots with camera movements have some blinking horizontal lines, not too much but visible (I hope this is a good description). Those lines are not apparent in the source footage. Only after export.
I've tried:
all of the field options (deinterlace, remove flicker and all of the others), removing blending frames, different bit rates, frame size, frame size as a multiplication of 16, frame rate as source, 25 fps.
I'm still about to try f4v, 2 pass and CBR...
Perhaps if you add a slow motion effect, blur or anything else?
Has anyone encountered this phenomena? Does anyone have a clue as to what the solution to this may be?

Hi
Maybe this is what's happening...
Your source stuff is interlaced and your export is progressive. In essence you lose half your horizontal resolution when you do that...as you are going from having two fields per saved frame to having one "field" or "frame"....
The difference wouldn't be that noticeable when there is no motion cause the lost field in translation isn't going to be that noticeable when there's not a lot of movement ( action )...
As the action increases ( this could be the camera moving or the talent (subject ) moving...amounts to the same thing..." movement "...sooo, when that happens in the export ( the way the codec interprets the frames )...you could get some ....
1) artifacts
2) flashing horizontal lines...which is basically the "missing" information" ..
Normally your source video and your export video would be the same...for the best product
If you half the size of your export file ( say from 720x480 to half the size ) and go progressive from interlaced you have a much better chance to not see any artifacts and missing information....
It's actually a tribute to Premiere that it can complete this kind of export and deal with such disparate circumstances....
Rod

Similar Messages

Cannot export from QT to FLV

I am on a Mac running OS X 10.4.8, Flash MX 2004 Professional
and QuickTime Player 7.1.3 Professional.
I want to take a .mov file that I've gotten from a client,
and export it as a .flv file. However, in QT, when I select
"Export...", there are no selections on the pull-down menu of
versions that let me save as an FLV file.
The FLV.component file is in the correct folder, and I
downloaded and installed what I think is the latest version of
Flash Video Exporter from this link:
http://www.adobe.com/devnet/flash/articles/flv_exporter.html
I've also thrown away the preference files for QuickTime and
Flash, and restarted both programs, but still no dice.
Any thoughts on what I can do? This is the only client I've
got right now who needs this service, so I would REALLY PREFER not
to buy yet another piece of software to solve this; it seems like
all indications are that since I already own QT Pro and Flash MX
2004 Pro I should have all the right stuff in my hands as it is.
Thanks for advice!
-Sara

Hey -- still looking for an answer on this one, surprised no
one has responded.
I also posted to apple.com's discussion list, where I got
some great advice but no resolution. One poster suggested that this
problem might be coming from the fact that I'm on an intel-based
Mac; he said that the flv.component file (v. 1.2.24) might not be
"intel-aware." Is that true? Is there a more recent version that
someone in my situation can try?
Finally, I went ahead and bought a piece of cheapware,
Mac-only, called VisualHub, and it is doing a satisfactory job for
this one-time need I had. www.techspansion.com/visualhub/

No audio when exporting from mpeg to flv

We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?

How are you determining that the FLV has no audio? Are you playing it back in VLC Player or importing it into Flash?
Also, do you see a full range of formats on the system where you don't hear audio? If some formats are missing this might be a licensing issue. Also check if AME recognizes audio on the MPEG source (hover over it in the queue and look for audio info in the tool tip).

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

OFFICEJET PRO 8600 PLUS HAS POOR QUALITY, BLACK TEXT HAS HORIZONTAL LINES & FADING

I have a Officejet Pro 8600 Plus which is a few months old. It gets light use although I'm a graphic designer working from home.
The problem just started with a very poor print quality. The black text fades in and out, has horizontal lines through it. The color text also has horizontal print qualities.
I replaced all of the color ink cartridges, the black is mostly full.
I have repeatedly run the Align Printhead and Clean Printhead functions on the printer with no improvement.
What can I do at this point? I need the printer function very soon.
I'm on a Mac OS 10.7.5

Hello Brembo50,
Welcome to the HP Support Forums!
Regarding the Officejet pro 8600 not printing a clean crisp black text, the steps you have done are very good attempts to resolve.
When you printed the cleaning, did the characters print clean and crisp? It should look like this:
Please excuse the blurry image and colors should be on the bottom of the page, how ever the above should give you an idea of what it should look like.
Performing the steps in this HP document: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help. It will have you doing steps you have done already, I recommend doing the steps but you could skip the steps you have done already.
Let me know how things look now,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

FCP Freezes When Exporting to Flash Video (FLV)

Final Cut Pro 7.0.2 freezes when exporting to Flash Video (FLV). The resulting FLV file contains only a few seconds of the exported video. A 2009 Apple Support notice offers this re. FCP 6 and CS3 Flash Video Encoder...
===
Final Cut Pro: May quit unexpectedly when exporting to Flash
Last Modified: February 13, 2009
Article: TS2593
Symptoms
Final Cut Pro may quit unexpectedly when you export using QuickTime Conversion if you choose Flash Video (FLV) from the Format menu.
Products Affected
Final Cut Pro 6.x, Adobe Creative Suite 3 Flash Video Encoder
Resolution
This can happen if you use the Adobe Creative Suite 3 Flash Video Encoder and Final Cut Pro together. This issue does not occur with the Flash Video Encoder in Adobe Creative Suite 4. To work around the issue:
Choose File > Export > QuickTime Movie.
Be sure to enable Make Movie Self-Contained.
Open the exported movie in QuickTime Player.
Export the movie to Flash from QuickTime Player.
===
I just installed CS5, so I would think I shouldn't be bothered with an older, problematic Flash Video Encoder. I don't think I should have to convert an MOV file to an FLV file using QuickTime Reader or anything else. Why doesn't it export correctly out of FCPro 7.0.2?

oh well.

Color issue with pdf from Indesign. I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

Thank you Peter. Someone else must have been on my computer because I do not change the settings. You pointed me in the right direction.
Thanks again.
Patrick

After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.

Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W

My new iPhone6 has horizontal light gray lines lines! Best visible in the white or bright areas, such as the SMS or the Healt App Button...

My new iPhone6 has horizontal light gray lines lines! Best visible in the white or bright areas, such as the SMS or the Healt App Button...

I think this is an excellent indicator that not only is Palm reviewing the feedback from the support forums here, but actively reviewing feedback/comments/wishes on other sites as well.
As the original poster copied this (quite solid, IMO) wishlist from Pre Central, the palm support staff acknowledged first seeing it there.

Bluetooth pane has gone missing since update from 10.10.2 to 10.10.3 on iMac mid 2007

I have a iMac mid 2007 model. I was running os x 10.10.2 with no problems. I update to os x 10.10.3 for the security issue. Now my bluetooth pane has gone missing from system preferences. I have tried everything suggested in suggested in support as it seems others have suffered the same thing on different macs. Nothing has that was suggested there has corrected this issue. Does anyone have any ideas apart from using a wired mouse and keyboard or using time machine to revert to os x 10.10.2? Let me know please.
Also booting up is slow to say the least, I can live with that though unless there is an as yet unknown by me fix.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

The screen on my MacBook Pro Retina has horizontal lines and has a brightness flicker every few seconds since june 2013 upgrade of airport utility.

The screen on my MacBook Pro Retina has horizontal lines and a flicker every few seconds this happened after this weeks Airport Utility 6.3 upgrade.

Hi John,
I would take your machine into a Apple service center. Its highly likely a hardware issue. The most likely issue being the display has failed. If there is no external damage to the machines display they will replace the whole display under warranty for you.

How do I change the mail reading pane from horizontal to vertical ?

How do I change the mail reading pane from horizontal to vertical ? Help !!

Mail > Preferences > Viewing
Select or deselect: Use classic layout

No Export for F4V or FLV in Premiere

Recently i had an Update to CS6, afterwards i Noticed there was no Export for F4V or FLV in Premiere as there was before. is this an issue? can any one explain what moght have happened? i dont think the UPDATE i got related to PPRO i think it was more Speedgrade and Camera Raw. any help or advice is greatly apprecaited

here you go, i can see F4V/FLV in Media Encoder, this is PPro

Preview pane has disappeared

Preview pane has suddenly disappeared.

The 'Message Pane' can be displayed by:
On the 'Menu Bar' toolbar
'View' > 'Layout' > select 'Message Pane'
Or quick method - toggle the view using '''f8''' key
or if using the menu icon
Menu Icon > Options > select 'Menu Bar' to enable it.
Just as a footnote:
There is no 'Preview' pane. Those words imply that you get to see a 'preview' of an email before opening to read.
The 'Message Pane' shows a selected opened email.

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?
I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps. The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file. How can I get the exported movie to be slowed down?

joegez,
There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
Hope this solves the problem for you.

Exporting SD DV to FLV - pan has horizontal blink

Similar Messages

Maybe you are looking for