Exporting sequence to Flash - no audio?

Taking a sequence extracted from a long project to export to flash for web... looks AND sounds great in timeline, no audio after transcode.
I do have the export audio ticked in the settings.
Any help would be great, Thanks,
Kenny

I found a solution to this issue. It is possible that deleting certain preferences fixed it, but the Cache for iPhoto was not allowing the "fix" to work.
So here's what I did (and all of it might not be necessary, but I don't know which fix actually work since I deleted the Cache info in the user folder and it started working again).
Macintosh HD --> Users --> Home Folder --> Library --> Preferences
Deleted the following:
com.apple.iPhoto.plist
com.apple.quicktime.plugin.preferences.plist
com.apple.quicktimeplayer.plist
Macintosh HD --> Users --> Home Folder --> Library --> Caches
I'm assuming you could just dump the com.apple.iPhoto folder BUT I dumped the whole thing (because at this point I was quite frustrated).
It works like a charm now. I wanted to share this with you so that you would know that it has been fixed by someone who had the some problem. I do hope this works for all of you.

Similar Messages

  • Exporting Sequence Unknown error

    Impossible to export sequence, I keep on getting the message "Error compilling movie.  Unknown error."
    I even tried to export in batches, it still does not work.
    The sequence is under 5 minutes with mix camera footage:  GoPro, Iphone, MPEG4, MXF files.
    Working on a MAC PRO 2 x 2.66 GHz Dual Core Intel. 16 CB memory. 
    Editing with Premiere Pro Cloud CS6.  Editing mode AVCHD Square pixel 23.976 fps matching the MXF files.
    I had previously exported another sequence of shorter length just fine. (it was a minute long) but this one is a no go.
    I took out the majority of effects I had created which were all done with CS6 (repo, resize, etc.. ), still getting the same message.  Started new project, new sequence, etc.. Same issue.
    Project was previously edited on another computer, on a PC, and the names of the folders and the clips were modified on the drive (from the original folders which do not exist anymore)  I had to relink the footage clip by clip to keep the original description, and yet sometimes when I shut down the program, the clips go unlinked, and I have to start again.
    I am just trying to export for Youtube.
    Suggestions are welcome.

    In my experience, having mixed content (codecs, resolutions, frame rates) does not cause encoding to fail.
    Your graphics card is not supported for PPro's GPU acceleration, and new drivers will not change that. For the purposes of your current encoding problems, being able to enable GPU acceleration is not likely to fix the issue. In fact, it's more likely that GPU acceleration would cause the problem, so I was going to recommend switching to software only had the GPU been in the mix.
    Here's what I'd try:
    Clear the project's cache file in case one of them is the fly in the ointment. You'll find them at the following path (unless you set a custom path for this project): /Users/<USERNAME>/Library/Application Support/Adobe/Common
    Download the trial version of PPRO CC, load your CS6 project, and try to encode. It's possible that you're hitting a problem that was fixed in 7.x. Be advised that if you make any edits to the project in 7.x, you will not be able to open the new version of the project in CS6.
    If neither of those measures work, then the best bet is to try to isolate the cause of the encoding failure. I do this by dividing the sequence: 1st half/2nd half; or video-only/audio-only; or if there are multiple tracks, disable one at a time.

  • Color Shift When Importing JPG Sequence into Flash CS6

    I am importing a jpg sequence into flash that has been exported from After Effects CS6. No matter what I try, the color will shift when the image imports into flash. The sequence originally started out as a vector graphic in Illustrator (color profile set to sRGB IEC61966-2.1) and then imported into After Effects for an animation that I couldn't quite achive in Flash. The color profile in After Effects is also sRGB IEC61966-2.1 with the "Match Legacy" checkbox checked. I export it out of After Effects as a JPG Sequence and then import into Flash. No matter what I try, the bitmap images' color will shift (become dull) when I import. Even when I open the images in Windows Photo Gallery, they look fine - it's only when I import into Flash.  I've also tried PNG and .PSD Sequence with the same result. I've searched around, but still haven't found a solution. Any help is greatly appreciated.

    I am in the midst of trying to figure out the opposite : Flash to After Effects.  I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile.  RGBA is only part of the story - color profile is all the rest of it.  Eye Dropper doesn't tell you the color profile attached to the image.

  • PP CC 14 & AME CC 14 Exporting Sequence to MPG2 DVD Problem

    I am trying to export a HD sequence out of PP CC14 to AME CC 14 for DVD.  All my settings are set, exporting to MPG2 DVD.  In the PP export window, if I choose either "Export" (which renders the files through PP) or "Queue" (which exports sequence to AME and renders the file there) both finished files are Re-transcoded when brought into Encore CS6.  That should not be the case.  It is transcoding the file twice and producing terrible quality.  Exporting to a H264 for blu-ray works fine, only the audio is re-transcoded.
    I found in the previous version of PP CC and AME CC (not the new "14" version), the workaround was to render everything through the PP Export Window and NOT send to AME.  If I did that, Encore CS6 would show "Transcoded or Do Not Transcode" in the video status window - and once again, would only re-transcode the audio. 
    Has anybody else experienced this? Or have any idea what I am talking about?  How does anybody else export to DVD?
    My workaround now is to use the H264 blu-ray file, import into Encore, choose "Max Render Quality," and burn the DVD that way. 
    I am running the New Mac Pro 10.9.3
    Thanks...

    Re Stan:
    This problem is happening when I am burning to DVD, not blu-ray. 
    When I do burn to blu-ray, the H264 file created in the PP 14 export window works fine in Encore - no re-transcoding. 
    The MPG2 file created for DVD in PP 14 has to be completely re-transcoded in Encore.
    On this particular project, I had both a h264 file and an mpg2 file, one for blu-ray one for DVD.  I just ended up using the h264 file for DVD, and let Encore re-transcode that file for DVD.  It was better quality than using the mpg2 and have encore re-transcode.
    I know it sounds confusing - let me know if you understand.

  • How to export a QT with eight audio tracks

    Hi  All. I want to export a sequence with 8 separate audio tracks (interviews on 1&2, music on 7&8, sound effects and ambient sound on the others) so that the resulting QT has 8 separate and distinct tracks, matching the tracks in FC.
    The goal is for a future editor at the TV station I work at to be able to take the video and ambient audio, but use different music.
    In sequence settings, I've got 'audio output' set to 8, with each grouping checked 'dual Mono'. But when I export, I get a QT with a mixed down stereo pair on channels 1 and 2 (with audio from all the FC tracks), and six empty tracks.

    I have a video tutorial...goes into a bit more detail, including how to make those 8 options happen:
    Export Multiple Channels of Audio in FCP
    http://library.creativecow.net/ross_shane/multi-audio/1

  • Converting bitmap image sequences to Flash

    Hello,
    I use LightWave 3D to create a set of characters that are
    simple talking heads. Composited in Mirage and edited in VT4, it's
    all bitmap images. You can see a sample here:
    Subversive
    Entertainment
    That version was intended for TV but isn't going to sell. I'd
    like to try it as an animated editorial cartoon embedded in a Flash
    player at online newspapers. But when I compress the video it
    doesn't convert as cleanly as I know a direct Flash file would. I'd
    like to import the image sequences into Flash and converting them
    to symbols(?) or movie clips(?) or(?)...
    What would be the best way to handle the image sequences in
    Flash? They are currently 180 frames long for each character, but I
    could reduce the image sequence to as little as 60 frames. Once the
    image sequence is converted to a set of symbols(?) they would be
    re-used over and over.
    I imported a 180 frame image sequence and it put one image on
    each frame in the Flash timeline. How would I convert that entire
    image seqence to a sequence of symbols(?) that I could re-use. When
    I exported it as a movie it made a .swf file that looks great but I
    don't think that's what I want to work with within Flash. (I'll
    create a differnt background in FLash as well.)
    Whew,
    Hope this made sense.
    TW

    after importing, select the entire range of keyframes
    containing your image sequence. Right-click
    over them and select COPY FRAMES.
    Open Library and create a new symbol.
    PASTE FRAMES into frame 1 of this new symbol.
    On main timeline create a new layer (delete original layer)
    and drg instance of your new symbol to
    it. Now you have a nested animation that can be reused.
    Chris Georgenes / mudbubble.com / keyframer.com / Adobe
    Community Expert
    tomwood2 wrote:
    > Hello,
    >
    > I use LightWave 3D to create a set of characters that
    are simple talking
    > heads. Composited in Mirage and edited in VT4, it's all
    bitmap images. You can
    > see a sample here:
    >
    > www.subversive-entertainment.com
    >
    > That version was intended for TV but isn't going to
    sell. I'd like to try it
    > as an animated editorial cartoon embedded in a Flash
    player at online
    > newspapers. But when I compress the video it doesn't
    convert as cleanly as I
    > know a direct Flash file would. I'd like to import the
    image sequences into
    > Flash and converting them to symbols(?) or movie
    clips(?) or(?)...
    >
    > What would be the best way to handle the image sequences
    in Flash? They are
    > currently 180 frames long for each character, but I
    could reduce the image
    > sequence to as little as 60 frames. Once the image
    sequence is converted to a
    > set of symbols(?) they would be re-used over and over.
    >
    > I imported a 180 frame image sequence and it put one
    image on each frame in
    > the Flash timeline. How would I convert that entire
    image seqence to a sequence
    > of symbols(?) that I could re-use. When I exported it as
    a movie it made a .swf
    > file that looks great but I don't think that's what I
    want to work with within
    > Flash. (I'll create a differnt background in FLash as
    well.)
    >
    > Whew,
    >
    > Hope this made sense.
    >
    > TW
    >

  • How to export sequence to P2 card?

    Hi everybody
    I saw a tutorial in Adobe webpage explaining how to export sequence back to P2 Card, as Premiere CS3.2 (updated) is able to recreate, from a edited timeline, all the folder and file system needed to be read on a P2 card under mxf format.
    This can be a great way to export full resolution HD edited footage from one PC to another.
    Unfortunately, I cannot find "export to P2" choice in my menu. I get export to Encore, to Tape, but no "P2" mention. But this mention appear in the Adobe tutorial... concernig any version from Premiere CS3.1
    How comes this feature doesn't appear anywhere into the menu of my Premiere pro CS3, version 3.2?
    Any clue?
    Thanks

    I found the link explaining how to do it.
    http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WSE32B8568-2904-4e95-861 A-F09F75AA6C7B.html
    Here is what they say:
    "Select the sequence or clip in the Timeline panel or Project panel.
    (Optional) If exporting from the Timeline, set a timeline marker, numbered 0 on the frame you want used as the P2 icon for the exported.
    If you do not set this marker, the first frame of the sequence will appear as the P2 icon by default.
    Choose File > Export > Export To P2."
    Problem is that: I don't get any "export to P2" at this place in my Premiere CS3.2

  • How export my vector flash to illustrator?

    Hi,
    In all software adobe CC the .fxg extenxtion has remove (she is abandoned),
    Now how can I export my vector illustrations to Illustrator?

    Hi All,
    Flash Pro CC 2014 (v14.0.0.110) is now available for download via the Creative Cloud App and Adobe website.
    We have added SVG Export feature to Flash Pro with this new release. You will now be able to export out vector content from the selected frame as an SVG image that can be opened directly in a Browser and even imported in Adobe Illustrator.
    SVG Export option will be available via the Publish Settings as well as via File Menu > Export > Export Image option.
    Along with this, we have added several new features with this release. Complete list is available at these links:
    Overview:         https://www.adobe.com/in/products/flash.html
    Whats new:      https://helpx.adobe.com/flash/using/whats-new.html
    Release Notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html
    Thanks,
    Nipun

  • FCP Imported Sequence will not play audio (waveforms present)

    Hello,
    I've imported a sequence from FCP 7 and it relinked with little issue.  My timeline has 10 audio tracks.  Waveforms are present on all tracks.  most all the audio are .aiff files.  I can load the audio into the source player and hear the audio and see the stereo VU meter working normally, however in the sequence there is no audio playing, nothing happening on the VU meters.
    I've checked my audio hardware outs, tested with a clip of tone as well.  Tone plays normally in the Source window but modulates oddly on the timeline, but it at least plays.
    I've searched the forum but my specifc issue doesn't seem to come up, I am not missing the audio in my clips.
    Helpful replies are most appreciated.
    bk

    I had this problem too.  I'm trying to remember what the culprit was, but check 2 things:
    Are the audio tracks enabled?  Right click and make sure they are.
    Is the audio level pulled all the way down on each clip?  I think that was the problem for me - I had to go through each clip and reset the audio level to 0...it was set to -∞.

  • Exporting a Flex4/flash builder 4 poject as a swf?

    Is it possible to export a Flex4/flash builder 4 project as a swf? Every time I try to export a project I get some weird file format. Also when I make a web project nothing even shows up on the page. Can anyone point me in some type of direction?

    check your bin-debug foldr in the flash-builder workspace. you will have everything compiled when ever you save the project into .htmls and .swf. if you dont see anything go to project> clean

  • No Flash Player Audio

    I've lost Flash Player Audio. To hopefully fix, I downloaded Flash Player 11 ActiveX Ver. 11.8.800.175 and got an "Installation Complete". However, the Flash Player Checker at adobe.com tells me when I do a "Check Now" that it is "Not Installed". I uninstalled and downloaded 3 times, but still get the "Not Installed" message. I continue to get video but no audio. My browser is Internet Explorer Ver. 10 and my OS is Windows 7. Please let me know what you think I should do to get back the audio?
    Thanks,    Rob

    Hello C.F. McBlob,
    I was previously getting sound from an MP3 App when I lost sound with Flash Player. I subsequently checked for sound with the MP3 App and was still getting sound. At that point I wrongly deducted my sound problem was with Flash Player. Well, the real cause of my problem turns out to be an intermittent operational problem with my speakers which I made a bandaid repair to after my dog chewed through the very fine speaker wire a year or so ago. I think its about time I spend $20 and get some new speakers. Thanks to your reply, I once again checked for sound with other apps and discovered my speakers were the problem. I will withdraw my post. Thank you and everyone else who took the time to read and think about my post.
    Regards,  Rob

  • Exporting for earlier flash plugin with CS5.5

    Hi,
    I am making a flash site for someone at www.danielkidane.com, and I am creating it using flash CS 5.5 Pro. I have set the publish settings for flash player 9, yet my client who is running flash plugin 10.3 is still receiving a message asking him to download 11.1.
    Other Sites I have created previously in CS 3 such as www.absolutionsaxophonequartet.com work fine on his computer, so I think there should be a way of exporting for his flash plugin. He is also on a mac...i dont know if this makes any difference!
    Thanks very Much
    Fraser

    Is it possible that you are generating the html for the Flash from Flash also? If so, the html may have a plugin test that is testing for the latest version rather than the one that you are trying to use.

  • Export image from Flash to .ai or .eps and keep transparent colors.

    Is there a way to, when I have finished this wonderful
    drawing in Flash with transparent colors, to keep them when I
    export them from Flash to Illustrator as an .ai or .eps?
    I'd like my images to be scalable and rezizable (to be able
    to be really BIG) when I deliver them.
    Please help! I use Flash MX and Illustrator CS.
    Lisa

    > Is there a way to, when I have finished this wonderful
    drawing in Flash with
    > transparent colors, to keep them when I export them from
    Flash to Illustrator
    > as an .ai or .eps?
    What happens when you import them into Illustrator?
    Christian Scholz-Flöter

  • How do I covert the format to mp3 when exporting to a flash drive?

    How do I convert a playlist to mp3 format when exporting to a flash drive? I was able to convert the file for importing.

    Convert the files, and then copy the newly created files to the flash drive.

  • Share in FC Pro Studio suddenly won't work - export button just flashes

    Hi,
    Can anyone help?
    I have an urgent project which I need to burn to DVD. I have used the share feature in FC Pro Studio loads of times and it does the job but now the export button just flashes and nothing happens when I click on it.
    Someone helped me a while back by suggesting that there might be a share confict with Compressor or Q Master and that I should delete some library files. Whatever it was worked but that was over a year ago and I cant remember what they recommended but it worked brilliantly.
    Many poeple have told me to use Compressor but I've done that and the DVD wouldn't play on all PCs.
    I'd like to use Share.
    Please can someone suggest a solution. There definitley is one.
    Thanks,
    Mike

    The best workflow is to export a selfcontained quicktime with current settings from fcp, use compressor with the appropriate dvd preset and bring the resulting files (m2v and ac3) in dvdsp and author the dvd there.  Do some searching here and I seem to remember someone has a very simple description of this workflow.  If you had compatibility problems with a dvd on a pc, it would probably be caused by the particular dvd blanks you used.

Maybe you are looking for