Exporting/Sharing trouble that I wasn't having a few weeks ago
I'm trying to export a movie, there are no missing clips, my "Share" is lit up and allows me to go through the motions as if I am exporting a file but then no file appears wherever I designate it to go. If I restart my computer it will occasionally make a TEMP .mov file thats like 48kb but it will not render a proper movie for me. It was working fine last time I exported the project in April but now no luck. Any suggestions?
riks1105 wrote:
because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?
Get a powered hub
USB is cranky, you're not the first (probably not the last) to have this happen.
Similar Messages
-
"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.
I recently formatted my computer. In other words, I'm not using too much memory of my HD. My Memory Ram is 8GB.dandotcraig wrote:
A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
Umm,, no offence... but what is ridiculous... is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
So.. Here's the thing....
LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
Here are just a few ideas to think about.. for around the time this started..
Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
Did you install any new Apps on your Mac?
Did you add a new Hard Drive? How is it formatted?
Did you start recording or creating music in a different way to how you used to before the problem started?
Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
....and maybe a few of the others here will come up with other ideas and suggestions to help you...
Good luck and let us know how you got on... -
A few weeks ago I had the same issue where items (tv shows) I purchased on itunes would not show using my apple tv on my main television. It gives me an error stating I need to "authorize" the device/account etc. There is no problem with the authorization it is correct; tv show plays on the computer. The last time this happened the local apple store suggested I bring in my entire imac, hard drive, apple tv, etc. This seemed crazy since I had been able to eliminate that there was a problem with my password, imac, etc. I had also already tried all of the restore, reset, options to include restoring the apple tv, changing password and authorizing everything again. Then I found out via an online discussion there were others having the same problem and it was due to some sort of server issue apple was having. Is anyone else having this problem besides me again?
I think I have the same problem.
Apple TV 2. I can watch stuff I downloaded a while ago, but after I downloaded a season of a TV show on Friday night (Oct 28), I got the "Authorization Required" message. Ruined my Friday night trying to troubleshoot this, and found a bunch of posts on this forum about Apple's Servers being down can cause this. Since I'd done nothing different to my setup, I assumed that indeed "Apple's servers being down" was causing my grief.
It's now Oct 31st, and I'm still getting the error on the newly-downloaded stuff. So either Apple's servers are having serious grief (and passing it on to me!) or else there might be something else after all.
I've de-authorized and re-authorized my computer (I never thought for a second it would help because I can play "older stuff". Everything in my TV shows folder is bought from iTunes - i.e., it's all completely legit. We haven't even vacuumed behind the TV(!!) so we haven't disturbed anything... And the key info is that I can play stuff purchased prior to Oct 28th, but the stuff I purchased on Oct 28th hets the "Authorization required" message.
Does anyone have any ideas? -
Anyone having issues syncing iPhone 3GS with Microsoft Outlook 2007? iTunes says it is syncing but it will not update calendar or contacts. It just stopped working a few weeks ago.
I'm glad to hear that I'm not the only person struggling with exact issue. I've rebooted, upgraded, re-installed, pulled all my hair out as nothing works.
The biggest dissapointment with this thread is that nobody seems to have responded with a solution.
And yes I've managed to pull together enough intellegence to tick the box "sync to outlook" in iTunes - still nothing man.
Definately does not sync from phone to PC and is very hit and miss on PC to Phone. In other words now running 2 seperate calendars - Not helpful Jan. -
A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it. I was able to reinstall itunes and it works fine including syncing with my ipod. However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program. This a nusance and really slows down getting to my email. From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes. I can't find a way to remove this MobileMe from my PC. I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it. Any suggestions on how this can be removed?
Do you have a backup that you can restore from? Your old hard drive seems to be the problem.
-
I purchased photoshop cc a few weeks ago, now I get the message that my trial is over. I'm stuck is there a solution?
Refer Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If you use Photoshop at all, you may need to install the latest update to resolve this issue. See this blog post for more information:
http://blogs.adobe.com/crawlspace/2013/01/photoshop-13-0-413-1-2-updat es-now-available.html
If you do not have Photoshop, then try the solution that others have mentioned previously:
Open the Adobe Application Manager (AAM).
If applicable, let AAM complete any automatic updates and restart itself.
Sign in with your Adobe ID. (Optionally, you can close AAM at this point.)
Open a CS6 application (e.g. InDesign CC).
If prompted (e.g. you get the trial screen), click "License This Software" and sign in with your Adobe ID.
OR
Follow the below steps:
1. Close all the Adobe Applications. Logout from creative.adobe.com and re-login.
2. Once you launch the software and when you get the error saying the the trial version has expired, you will have an option saying "License this software".
3. Select this option and enter your credentials and click next.
4. You must be able to activate the software then.
Refer to: Purchased student CC but CC still says it's a free trial. How do I upgrade my account to purchased and not trial?
I'm a Creative Cloud member, why is my app launching as a trial? Mac OS 10.7.4
Regards
Rajshree -
Hello I have many generation fo ipads few week ago I updated my ipadmini sprint to ios 7.0.4 and my ipad start so slow like a crap I restored them and nothing happened after all of that manipulation I decided to buy a new one mini with retina which works
do you have a question or just wanted to tell that the org ipad mini is slow with ios7 ?
there are guides to inc performance on older ios7 using devices
http://www.phonearena.com/news/How-to-improve-performance-of-iPhone-4-4s-iPad-2- and-iPad-mini-with-iOS-7_id49256 -
I downloaded Mountain Lion a few weeks ago. Almost immediately I noticed that there was an issue. Every few minutes the screen or page I have open, e-mail, Facebook etc. will start to "jiggle" side to side. Like a nervous tick. During the few seconds it's doing that nothing else responds, it freezes my mouse etc. I guess I was hoping it would go away! Everything else is working just fine, and it never did this until I updated to Mountain Lion. Can this be fixed?
It is probably some incompatible 3rd party software.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise. -
A few weeks ago I cleared the history on my iPad. Since then it has not recorded any new history and the "clear history" tab looks like it is frozen in place. I have shut down the iPad several times, checked to make sure I have the latest update and read everything I can find about history. It tells me how to clear history but there is nothing that addresses what to do if it doesn't record history since the last time it was cleared. Can someone help me please? Thank you.
- Resset the iPad. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do you have Private Browings turned on in Settings>Safari? -
Exporting/sharing IMovie that is large
My Mac is OS X 10.9.5 I created an 18min31sec iMovie that I want to share with family. Is my only option to burn a DVD since it's so large?
Haldy wrote:
.. . Is there anything I can do to make this work?
there is some 'flaw'/bug in iM08, which allows import and editing of some codecs, but results on export with 'weird' pictures. well-known with video in 'Animation Codec'...
so, your observation is new, thanks for sharing
convert your Flash8 video BEFORE import into dv-stream, Apple Intermediate or h264. edit again. -
Perhaps the problem lies in the version of the Word file. Does anyone know what versions Pages 09 will accept? I have re-installed iWorks09, but that did not solve the problem. My operating system is 10.6.8 and I am current on updates.
The Word 2 doc is ancient. I wouldn't even know where to find one to test.
The obvious thing to test is open the documents you previously opened successfully.
If they still open successfully, then it is highly likely that the version that is the problem.
Peter -
I purchased this online, downloaded it without issue, and it won't open. I get an error message that states "Elements 13 has stopped working"
I have removed it and redownloaded it several times, and still no luck... HELP!
When I contacted Adobe support that's all they suggested, to reinstall...taveliben
What computer operating system?
Uninstall, free ccleaner run through, and reinstall with antivirus and firewall(s) disabled is not a bad idea. But, let us look at some other
factors before that.
1. When you try to open the program, how far do you get....Welcome Screen - clicking on Organizer or Video Editor or other?
Have you tried to open the program directly from the Adobe Premiere Elements.exe file after you have applied Run As Administrator to that file?
2. Does the problem exist with and without the antivirus and firewall(s) disabled? Are you working in a school or company network?
3. Are you working with a pen and tablet device instead of mouse?
4. Is your video card/graphics card driver version up to date according to the website of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed and are you running the programs as administrator?
Let us start here and then decide what next based on the details in your reply.
Besides uninstall/ccleaner/reinstall, we may next try deleting the Adobe Premiere Elements Prefs file or the whole 13 Folder in which it
exists or installing the program in a newly created user account with administrative privileges and trying to run the program from there.
But, let us rule in or out the first 4.
Any questions or need clarification on any of the above, please do not hesitate to ask.
Thank you.
ATR -
TS4002 How do I find an e-mail that I sent a few weeks ago? I did a search but it doesn't show up
I searched and it came up once in a different mailbox. I dragged it to my Sent box but it is no longer there. I am not sure whether it's on the Cloud or on my Mac.
I just answered my own question. Answer: make sure that the signature is associated with the "from" address. All is well.
-
I Lost my phone at the office building with more than 10different company and thousands of employees. since no one returned the phone and the device was already turned off i tried logging in and use find my iphone to send a message. But after days since no one is returning it i tried putting passcode on lock mode... And who would have thought that after a week someone will call me and told me that she will return the phone. But unfortunately i forgot the lock code so i cant use it. I dont want to restore it since my photos and videos are not sync to my itunes. if only theres a way that it would only just require my apple id and not the 4 digit code
There's no way to unlock it without restoring it.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
When I click on my photos & albums photos in FB they are small and surrounded by a large strip box of black. Also getting Photoshop instead of regular JPEg info. Never happened before until used Firefox.
Sh=eems like I've been high-jacked by some other photo app, but can't find what.
What to do?Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
Maybe you are looking for
-
Unable to nullify a VARCHAR value with SQL Developer on Linux
Hi, I want to nullify a VARCHAR column value. I clear the field in the editor then click on "commit" button. Here is what I see in console output: UPDATE "TBL_COMMON"."TBL_DOMAINS" SET LDAP_SERVER_ADMINDN = WHERE ROWID = 'AAANOUAAFAAAAGIAAA' AND ORA_
-
I am unable to get the latest update - The message from Creative Cloud is Failed, error UM441I210 When I did a search on the error number the steps it suggested were to Restart (still failed), uninstall and re-install (still failed) and finally to lo
-
How to upload Purchase Order Data thru LSMW
Hi All, I need to upload Purchase order data thru LSMW. LSMW Provides standard object method which does not suit for split valuation. But in the client place split valuation is maintained. Is there any other of option of uploading the data. Regards,
-
ACL failure with RDBMSRealm removed user session
When using RDBMSRealm, the user's session gets invalidated when the user do not have access to certain pages. When I try this behaviour without enabling the realm and setting the user groups and password in weblogic.properties, I
-
BLOB field in report causes suppresion of one record
I am using Crystal Reports 10 connecting to a view in an Oracle 10g database using an Oracle driver connection. We have a report that has been in use for sometime that displays the image in a BLOB field in the Report Footer. A parameter based on a u