Exporting slices from multiple states doesn't name the 1st state

I've tried various setups in the File > HTML Setup > Document Specific options for setting state names for exported slices, and i've tried the defaults.
Whenever I have a page with multiple states, and i want to export a slice from each state, when it generates the files it creates:
slicename.png
slicename_s2.png
slicename_s3.png etc
how can i force fireworks to name the 1st slice with _s1

Similar Messages

Exporting Text from multiple text boxes?

I'm using InDesign CS3 on the Macintosh. I need to export text from multiple text boxes/stories into one text file. The Export File command only exports text when the text tool is selected and the cursor is in the text box. Unfortunately, I have 8-20 individual text boxes per page, none are linked, and my document is 100+ pages, so selecting each text box individually is much too time consuming. There must be a better way - Please help!
Thanks!
Carolyn

The text exporter plug-in seems to work! I did a quick test - text still will need some clean-up to make sure it's in the correct order, but MUCH better than exporting each story individually. THANKS!

When I try to export photos from iPhoto, why does it truncate the title I have given the photo? For example, I have labeled it 2013RoxyCarousel. When saved to desktop, it reads 2013. The rest is omitted.

When I try to export photos from iPhoto, why does it truncate the title I have given the photo? For example, I have labeled it 2013RoxyCarousel. When saved to desktop, it reads 2013. The rest is omitted.

iPhoto 7.1.5.
I chose these settings:
Kind: JPEG
Quality: medium
Include title and keywords (checked)
Size: small
File name: use title
I guess that is what you meant. Thanks for replying.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
I tried to use the attached command through TERMINAL :
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
Use -help for a list of options.
But i didn't work as I got the above error message.
best regards
Jeroen

I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

Issue exporting slices from different pages

I'm an experienced Fireworks user, and love the new pages
function, but have found what I consider to be a bug.
I have about 70 graphics that I need to have trimmed in one
direction but not the other. Since I can't do this with layers
(Adobe should REALLY consider adding this as a feature for
exporting by layers, imo - currently exporting by layer only allows
trimming in both directions or no trim) I'm using pages - each page
has a single layer with multiple objects, and a single slice. This
is great, except for one giant bug: when I try to export "images
only" + "selected slices only" and deselect "this page only", it
uses the page name for the exported graphic, not the slice name. If
I export all the pages, the slice names are used. This is a big
issue for us, since exporting by layers or exporting slices using
pages is a HUGE help in repetitive image production (but only when
it works right).

Kathleen13 wrote:
> There are 70 pages with one slice per page. Each slice
is uniquely named,
> according to a naming convention. It is not a shared
layer slice or a master
> page slice.
>
> 1. I want all the slices on about half of the pages to
print, and the output
> graphics should be named for the slices.
> 2. I turned off the slices on the pages where I don't
want the slice to export
> 3. I am exporting "images only", using slices, with
"this page only"
> deselected and "selected slices only" turned on
(although, I tried it with that
> turned off and saw no difference in the result).
>
> In previous versions of Fireworks, only the slices that
are turned on will
> export, so it follows that should still be the case,
regardless of what page
> they're on. And that is the case: only the slices that
are turned on export,
> but instead of being named for the slice, they're named
for the page. If the
> app were exporting the pages, the entire page area
should export, but it
> doesn't. Also, export pages to files is a different
command in the drop menu on
> export, so exporting slices should not export pages, any
way you look at it.
>
> Lastly, the slices export with the slice names if I turn
them all on, but if
> any slices are turned off, the slices export with the
page names. I can't
> imagine that is intended behavior because it's not
logical or helpful, and I
> can't imagine that it would be considered expected
behavior by a user.
>
> I cannot send the files I am working on, for legal
reasons, but I will create
> files that require the same process. It will take me a
couple of days as I am
> in crunch mode on this project.
>
Thanks Kathleen. This is great detailed info. I look forward
to seeing
your example. Hopefully we can figure something out. :-)
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

Picking files from multiple folders based on name send to destination folde

Hi,
I want to pick multiple files from multiple folders with one root folder. Based on file name I want to send it to diffirent folders. No need to go for message mapping. Can anyone suggest me.
Thanks & Regards,
Prasad Kotla.

Hi Prasad,
to pick the files from multiple source directory, can use "Advance Selection for Source File" in Sender CC.
If you wand to develop a Scenario without Message mapping, develop a scenario as "Sender as Virtual receiver"
This option is available in Sender agreement, just give the dummy name for Msg Interface and Namespace, Name defined should be same in Rec Agreement.
Develop only: Sende CC, Receiver CC, SA, RA
No need to develop ID and RD as no mapping is involved.
If u want to send the files to different folders of receiver side, just develop the adapter module which changes the directory based on the sender filename.
If the sender and receiver directory is same than check the "adapter specific Msg Attribute" and "directory" checkbox in both the sender and receiver CC. in this case no need to develop Custom module for changing the directory. files will be automatically placed in the path they were picked from sendor directory
appreciate if useful
regards,
chandra shekhar

Batch export text from multiple Indesign files, applying em and strong tags

Hi there,
I am struggling for a while now with the following workflow:
batch exporting all text (text only) as plain text, from multiple Indesign files, applying and for all the bold and italics (for instance: Molluptas verion nossum idist doluptatet maiorerum quiaspienit, cum erferiosapis eos expe nonsequas verumquae dolor sim eos doluptatiur autet lab idicili beatum deliquat).
Properly tagging the styles, will be too time consuming, as these documents are as old as 1998, have inconsistent untagged styles; it will mean to manually open up each file, assign tags for all styles (not to mention that might be some local overwrites).
This task is necessary to have all the archive, available on wordpress website.
Any feedback would be much appreciated it.
Thanks.

There may well be a script or you may have pay someone to write it. All I can tell you is that any text not mapped to a style will be a mess in the HTML code.
Can’t comment on Quark files. I have no clue what they’re capable of.
Bob

Export video from multiple iOS devices to a Mac without using iTunes

I am tasked with importing video files from multiple iPads to a single Mac to aggregate for editing.
The file sizes on each device are many gigs large. I don't want to use iMovie on the Mac or iOS.
I don't want to use iTunes (since there are many iPads not owned by me to import video from).
Suggestions?
Paul
Chicago

iTunes. Other than that there is no direct method. However, do try the iPhone forums.

Dataflow to one attribute from multiple views doesn't work

I have an oracle database, of which I use two tables. Each table has its own view in the meta directory.
The first view contains a table which consists of a uid generated by another system and three other non-important columns. This uid is the only column I need, this should be the naming (rdn) for use with my directory entries.
The second view contains almost all the other data, such as adresses, (full) names, mail etc.
I've configured the first view with a join rule, dn mapping rule and attribute flow rule to sync a new entry from my oracle database view 1 to the metaview.
Point is that at that time I'm missing information such as givenName, sn, cn etc. As those are required by the objectClass, I configured my attribute flow rule to also flow het uid from database into them.
So that's that. I've got my new entry with the uid I want.
The second view is configured with an attribute flow rule and a join rule so it matches the entry created by the rules above.
Here's the thing: any attribute (such as mail facsimiletelephonenumber, etc) configured in my attribute flow rule from view 2 is synched to the metaview entry, except for those attributes that already are flown from view1.
No matter what attribute I try, for instance givenName, no attribute is never overwritten with a suitable value from my oracle database view 2. It still has the value of uid from my view 1.
Is there a way to fix this or am I missing some settings here? I've fiddled around a bit with the options in the capabilities and configuration tabs with very little success.

AFter some experimentation, discovered the following:
Go to Quiz > Quiz Preferences. Under Settings, there is a
"Allow user to review quiz" check box. Under Pass or Fail, there is
an "Infinite attempts" check box. I had both of these unselected.
Here's what happens when you select or deselect one or both:
Review + 1 attempt: User starts to answer questions, and then
backs up. User can go forward again. Answered questions still
display the answers. Once reaches unanswered questions, they are
now locked.
Review + Infinite: User starts to answer questions, and then
backs up. User can go forward again. All answers to questions
erased and user can answer all questions.
No Review + 1 attempt: User starts to answer questions, and
then backs up. User can't go forward again. (This was the situation
encountered.)
No Review + Infinite: Same as Review + Infinite.

How do I export songs from my iPhone onto iTunes? (The songs are from a seperate computer than the one I am trying to import the songs to)

How do I put songs from my iphone onto itunes?

The only way to do this is to purchase 3rd party software such as Touch Copy. iTunes will transfer purchased music from your phone to your iTunes library (by right-clicking on your phone in iTunes and selecting Transfer Purchases), but not music that wasn't purchased from iTunes. If the other computer is at your home, on the same network and logged into the same Apple ID you can use Home Sharing to copy music from one iTunes library to the other (see http://support.apple.com/kb/HT3819).

Fastest way to export Albums from Multiple Libraries?

I'm probably the only MAC user on the planet who has somehow created over ten iPhoto Libraries each with many many albums, containing about 25,000 photos -- many of which are duplicates. I am using an iMAC with OSX 10.7.5 and iPhoto '11 9.4.3
GOAL: I want to upload all photos to my external drive. I don't want any of them ever to be in iPhoto. I want to keep them organized by the ALBUM names.
PROCESS: I've been opening each Library and selecting all photos from each album then exporting them to my external drive as maximum quality, full size, with album name sequential. It was working for a while .....
PROBLEM: Now, I get error message saying "Unable to create" and yet some of the photos did upload. I've tried this using all the different options and also tried uploadidng to desktop instead of external drive. Nothing works! Also, I want to keep the original date of the photo but it is changing them all to today's date as the date created!
QUESTIONS:
1. Why does it upload some successfully then stop? Is there a limit on the number of files I can export at a time? Why doesn't the error message say THAT then, Apple?
2. Is there away to keep the photo's original date when exporting (given the process is successful, ha ha)?
3. Is there an easier way to achieve my goal? I tried iPhoto Library Manager that claims to consolidate libraries by album name, but it did not consolidate them all, it gave me a bunch of empty albums and duplicate albums. So now it is one more of my 15+ libraries.

When I export photos, the date changes to the current date. Is this a bug or am I doing something wrong?
I'll guess neither. You're looking at the date on the file and that's not the same as the date on the Photo.
There are two kinds of metadata involved when you consider jpeg or other image file.
One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
However, the Photo Date doesn't change. The problem is that the Finder doesn't work with Exif.
So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.
I'm not sure why you want to do this thing of exporting everything and moving them to an external, but the fact that the Finder doesn't understand metadata and is poor at working with Photo files is a factor you'll need to take account of.
3. AFAIK Library Manager does work with video.
4. There's no simple answer to that. Varies depending on whether you're talking about the original, the preview or the thumbs. When you say "all over the place", where are you looking?

Building a session query from multiple queries of same name

I have a SQL query that runs with the name="getcamp" multiple times within a page, then uses a template to display results.
The criteria is different on each run, but the data retrieved is exactly the same.
On another page I need all of the data, so I can loop over it as if it was one query. The idea is to pass the query to the other page in a name="session.getcamp" , so that the data from the query is stored in a session.
The issue I have is that there are the 5 queries with the same name in the first page. Could anybody tell me how I would merge each one into a session query that would have the one name session.getcamp but contain the results of all 5 queries
Thanks
Mark

ACS LLC wrote:
I have a SQL query that runs with the name="getcamp" multiple times within a page, then uses a template to display results.
The criteria is different on each run, but the data retrieved is exactly the same.
On another page I need all of the data, so I can loop over it as if it was one query. The idea is to pass the query to the other page in a name="session.getcamp" , so that the data from the query is stored in a session.
The issue I have is that there are the 5 queries with the same name in the first page. Could anybody tell me how I would merge each one into a session query that would have the one name session.getcamp but contain the results of all 5 queries
I would suggest the following design:
1) Indeed use the session scope to store the part-queries. However, I would store each of them in the session scope, and union them only where a union is required. You thereby achieve more power and flexibility, as each of the queries will continue to be available to requests throughout the session.
2) I would use the duplicate function to avoid any further reference to the original query. Something like:
First query, name= "getCamp"
<cfset session.getCamp1 = duplicate(getCamp)>
Second query, name= "getCamp"
<cfset session.getCamp2 = duplicate(getCamp)>
etc., etc.
3) On the page where you need to merge the 5 queries:
<cfquery name="getCamp_merged" dbtype="query">
select * from session.getCamp1
union
select * from session.getCamp2
union
select * from session.getCamp3
union
select * from session.getCamp4
union
select * from session.getCamp5
</cfquery>
It's Sunday today, at least where I am. As far as CPU consumption is concerned, whether or not what I've suggested turns out to be the devil's work is up to you to find out.

Exporting PDF from InDesign with check boxes & name fields

We are a high production print shop and do most of our proofing via PDF. We email the customer a PDF and they print it out, show it to their customer, mark changes, and fax it back to us. We'd like to start letting the customers email their proofs back to us with a check box marked for either OK or Changes Needed, as well as a place for a name and date.
It appears that InDesign will not do this natively. I can make Acrobat do this, no problem. What I tried to do was to take a PDF of the "Proof OK" box with the check boxes and form fields and drop it into InDesign in hopes that the embedded PDF would hold it's interactive capabilities. It does not.
Is there a way to make this work like I need without a bunch of scripting in a language I don't know well? Taking the hundred or so proofs each day and manually making them interactive PDFs is not really an option for obvious time reasons.
Thanks,
Mike

This can't be done in ID, but I'd bet they can help you on the Acrobat Scripting forum. It shouldn't be too hard to do a script that only adds approval checkboxes and sets the document for commenting.

How to go from multiple chapters ONE timeline to the menu

Recently had to convert a VHS to a DVD, where the file given to me was 1 Mpeg of the entire VHS capture. Not only that, but there were many interstitial segments which they didn`t want shown on the dvd. Last but not least, the order of sections on the VHS was random, whereas the DVD menu was alphabetical.
No matter what I did to the timeline/segments/chapter markers/menu directions, you`d select an item from the menu, it would play the right item from the [start] chapter marker, but then would totally ignore the [end] chapter marker (and it`s [end action] on the timeline and menu), and carry on playing whatever was left on the timeline (including all the stuff I didn`t want to be seen by the viewer).
Yes, I know the best way is to have been given multiple clips, edited the way they wanted them... but we don`t always get what we want, so have to work with what we`re given.
BUT, it IS possible to have people see only the bits you want them to see (selected from the menu) and then send them back to the menu (highlighted on the next item in the menu), from the one timline:
- Import your mpeg as a timeline.
- Add all your chapter markers (one at the start of the section and one at the end). It`s a good idea to name them, so you know where to drag links to later.
- At the [start] chapter marker of a segment in the timeline, select the [end action] and point it to the menu. This is optional, as apparently it ignores this anyway, but I like to make doubly sure of things with Encore :)
- On the menu item for that segment, point the [link] to the [start] chapter marker on the timeline.
All pretty normal so far, but here`s the trick to get it to go where you want it to go, without playing the whole timeline after it`s supposed to have gone back to the menu.
- Still working from the menu, point the [override] for that segment, to the next item on the menu.
- select the imported movie timeline in the 'project' window, and then press the [Set.....] button in the properties window, and change the remote control button`s to 'Custom' and make sure next/previous chapter, and fast-forward/rewind are de-selected. If they`re left selected then no matter what you do, the viewer can ff or next chapter, and they`ll see all the things you don`t want them to see. Leave pause/play and Title/Menu selected.
Hope this is helpful to some of you....
Storm

>Well, it was ignoring the chapter end-actions
Absent overrides or user-induced navigational errors (like setting the end action for chapter 3 when you want the program to return to the menu after chapter 2 plays), I don't see how this is possible.
A chapter end action, properly set, will execute during timeline playback when the chapter
finishes playing. I know this sounds obvious and elementary, but it is a very easy concept to overlook. I am not assuming incompetence, just unfamiliarity. :)
>If you could direct me to some tutorials on how to use Chapter End Playlists and Chapter Playlists to do this I`d appreciate it. I went through the manual and tried it but it didn`t work for me, and could only find people saying 'do things with chapter playlists' without going into detail on how to do it, when I searched the forums
If you can squeeze $17 - $25 into your budget, my book (The Focal Easy Guide to Adobe Encore DVD 2.0) has step-by-step instructions and colorful illustrations on how to set up a Chapter Playlist and how to properly set up Chapter End Actions.
To show my objectivity (and not get booted out of the forum for self-advertising), Adobe has published one of their Classroom in a Book series that covers Encore 2.0. Either way, you should have a reference handy when using complex programs like the ones that are part of the Adobe Production Studio.
-Jeff

Exporting video from media encoder. Half of the video export other half goes blank/black

Hi! I'm in need of help I've been trying to export this video to media encoder for about 20days now. I'm working with premiere pro cs5.5 and after effects cs5.5-
Dynamic link, I've updated the two and everything, every time I try to export my video half willl export and I believe after effects crashes and thats when the other
half of the video goes blank/black, this happens everytime, it's very frustrating and I don't know what is causing this. it actually just started.
it also does this on cs5 as well.
I am working on windows 7 HPE-510y Hewlett-Packard computer
14gb of ram

Have you checked the output in AME? I always check that before I hit go to make sure that I haven't fouled something up and that the in and out points are what I want. I spot check all along the timeline.
I'm thinking that you have some parts of the Premiere Pro project that are shots or sequences that have been "Replaced with After Effects Composotion." If this is the case, does the blackness happen in one of these shots? If it does I'd suggest trying to render that shot in AE and replace it in the PPro Timeline. If After Effects is really crashing you'll be able to find out why.
A little more detail about your project would also help.

Exporting slices from multiple states doesn't name the 1st state

Similar Messages

Maybe you are looking for