Exporting still frame from FCE

When exporting a still frame created in FCE, is there a way to make it so the resolution is as high as possible?

There is no point in making the resolution higher than the original frame as it will not improve it.
You might be able to do it in Photoshop or a similar program.

Similar Messages

  • Exporting Still Frames from iMovie

    I have managed to extract still frames from videos and put them back into iMovie. I would now like to export some still frames from iMovie and put them into a Word document. I can't seem to figure out how to do this. Any ideas?

    set playhead at wanted position of clip ..
    ctr-click, choose 'add still frame to Project'
    in Project window, click on new clip, ctrl-click, choose 'reveal in Finder'
    from Finder, copy .jpg to any other location of harddrive
    drag that copy into your document..

  • How to export still frame from Quicktime movie?

    Hello folks
    I often need to use a still frame from a quicktime movie as an image file to work with in PhotoShop for windows.
    If I export a frame via the export command and choose "Movie to picture" I end up with a .pct file, that Photoshop will not open.
    I can open the .pct file with the Quicktime PictureViewer and then export it from that app as i.e. a JPEG-file, but I would like to avoid that extra step and just export a usable file straight from QT.
    Anybody know how that can be done?
    Best regards
    Kris

    Same problem here - no matter whether I choose Photo - JPEG or PNG format as the "compressor", QT 7 Pro wants to save with a .pct extension, and changing it to .jpg or .png extension fails to open.
    The two workarounds I've found are:
    1. Save it in Photo - JPEG or PNG format with a .pct extension, open with Photoshop CS4 or below, save to desired format.
    One may be able to accomplish the same using Preview instead of Photoshop, but on my Snow Leopard machine I get the error "The PICT file format is not supported in 64-bit mode. Try selecting "Open in 32 Bit Mode" in the Finder's info window for Preview." and I don't feel like bothering to do this.
    2. Use Grab to take a screenshot, copy into Preview, crop as necessary and save to desired format.
    Which is easier depends on whether you feel like having to do precision cropping or not. Totally agree with above commenters - whither PICT, Apple?
    Message was edited by: Daniel Toman

  • Exporting still frames

    Hi
    help cs4 pro
    Trying to export still frames from time line.
    Go to file
    export-- media
    Bit map
    format bit map
    reset ntsc bit map
    output name: C;\still\house
    save
    Adobe Media Encoder comes up
    click start queue
    hangs
    no file created.
    Thanks

    You're welcome.
    You will also find links to many
    free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
    Happy editing.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Can you send/export a still frame from an FCP sequence?

    Can you send/export a still frame from FCP as a picture to the desktop? Doesn't matter if it is a .jpeg, .tiff, . bitmap
    G5 Mac OS X (10.4.8) Dual 1.8

    serach the forum for any of the hundreds of posts detailing this process -
    my personal favorite is shift-N, apple-9, type name, drag to bin, batch export.
    The best thing about the batch export queue is you can set up a batch with the file format and destination folder and then keep adding new clips/stills to export.
    Hope this helps -
    Max Average

  • How to create and export a still frame from a movie in iMovie 09

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
    *To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
    *If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
    *If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
    Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
    Note: If you do not have a right mouse button, then control-click will work instead of right-click.
    This is the 1st version of this tip. It was submitted on Dec 5, 2009 by AppleMan1958.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    First, click iMovie/About and see which version you have.
    Versoon 9.0.2 would be iMovie 11.
    Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
    If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

  • Capturing Still Frames from a QuickTime Movie

    1. Can I capture still frames from a QT Movie file using QuickTime 7?
    2. If not can I do it with QuickTime Pro?
      Windows XP  

    QuickTime Pro can "Export" a still frame to various image formats.
    Just position the playhead on the frame you wish to export. Use the right-left arrow keys to "step" through frames.
    You can get a larger sized export by enlarging the Player window.

  • Print Out Still Frames From HD Video

    I am importing HD video into iMovie 08. I have made a few still frames from the video for printing. I could not export them to iPhoto or Photoshop Elements 2.
    How can I make HD video prints? Do I need new software?

    I have made a few still frames from the video for printing. I could not export them to iPhoto or Photoshop Elements 2.
    Select the "still frame" sequence and use the "Reveal in Finder" option to take you to the saved "still image" in the named_Project package. If you then double-click the image, it will open in Preview. Using Preview, you can print the image or save it to any of the available image formats in any "visible" location for later access by whatever graphic application you wish to use.

  • How do i create a still frame from a clip in iMovie 11? thanks

    Good morning. How do I create a still frame from a clip in iMovie 11.  Thanks

    First, get an app called MPEG Streamclip, which is free. (google MPEG Streamclip from Squared 5)
    Open MPEG Streamclip.
    In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
    Drag this clip into MPEG Streamclip
    In MPEG Streamclip, move the playhead to the frame you want.
    In MPEG Streamclip, click FILE/EXPORT FRAME.
    Choose JPEG, TIFF, or PNG and give it a name.
    You can then drag this photo into iPhoto.
    Here is a video I made that steps through this...

  • Capture/Export single frame from viewer.

    Hi Folks,
    Installed is the most current release.
    Seems to have lost ability to capture/share/export single frame from viewer.
    How do I capture a single frame appearing in the viewer?
    Output desired is a PNG file.
    Thank you,
    Manuel

    Click the Share button. Select Add Destimnations and you'll see Still Image in Destination preferences.

  • Export Still Frame - Resolution

    I need to export a still frame from a video to create print materials. I exported as DPX from Program monitor (couldn't find any settings for resolution). Opened the file in Photoshop and realized the file resolution is 72 pixels per inch. How can I change export settings to be able to export stills at 300 resolution.Since DPX is used to create film prints, I assume there is a way to export stills at other than screen resolution. Suggestions and pointers appreciated.
    Thanks.
    RV

    I assume there is a way to export stills at other than screen resolution.
    There isn't. Screen resolution has little connection to print resolution. Video (and film) doesn't have any sort of DPI, though it's commonly referred to as having 72DPI; this is really just a convenience, more than anything. The only thing that matters in video is raw frame size, e.g. 1920x1080. At the typical print resolution of 300DPI, that's about 6.5"x3.5"--not exactly poster size.
    The best you can do is use Photoshop or other scaling algorithms to blow up the image, with the knowledge that it's going to get less sharp the larger you go.

  • Exporting Jpeg Frame from Timeline.

    Hi,
    I would like to know how to export a frame from my timeline with the same resolution. Currently I'm working on a project in Apple ProRes 422 and the director asked me if it is possible to take some screenshots. I've tried to find some solutions however I didn't find how... Is there any options available within FCP that could "export" that frame and be editable with Aperture or Photoshop ?
    Thanks
    Guim

    This is an easy one.
    Park the video on the frame you want to export (make sure there are no in points marked, or it'll export THAT frame.)
    File>export> Using Quicktime Conversion>Select Still image>Don't use jpeg- it's lossy>Tell it where to go> name it>hit the button. TIFF's are good, so are PSDs if someone wants to take it to photoshop.

  • After Effects CC - Export Still Frame

    Hi,
    I have recently upgraded to CC. I am trying to export still frames as a jpg from After Effects CC
    CS 5.5 (and previous versions) allowed me to use the shortcut ctrl+alt+s to add the current frame to the render queue as a still frame.  I would then change the format via the output module.
    The same shortcut in CC opens a dialogue box with psd as the only available output format. Composition> Save Frame As > File... also results in psd format with no other options.
    Is there a simillar simple process for exporting a still frame jpg via the render queue?
    Thanks in adavance

    scott_travers wrote:
    There does seem to be some unnecessary changes.
    However i have resolved this myself, if you click ok on the dialogue box and except the psd format, it adds it to the render quene where you can then change the format. No idea why there aren't any other options in the 'Save as File...' option, only PSD.
    This is the expected behavior when you have never rendered a comp from a newly installed version of AE. It's worked this way since at least AE 6.5 (the oldest version I have installed on a nearby computer to compare). The output module needs to have a destination for the file, so when you invoke the Save Frame As File command for the first time it brings up the Save As dialog. For the same reason, if you were to add a comp to the Render Queue directly it won't allow you to render until you set a destination.
    After the first time you create a output module with a destination, AE will remember the last-used location and use that by default without asking you. The only time you should it would ask you again is if you destroy AE's preferences or if the last-used location is no longer valid (deleted folder, disconnected drive, etc.).
    The reason the only selectable format here is PSD is because that is what the default OM for Save Frame As File uses. You can, and should, change this if you always use a different format. Go to Edit > Templates > Output Module . Create a new template with your desired settings and assign it to Frame Default.

  • Still frame from video: PS Elements 9

    I am new to PS, trying to get a still frame from a video. My camera uses a file  MP4, but PS says it does not accept that format.  How do I convert my MP4 videos so I can get some still pix from it?  I did the file>import>> frame for video>browze. It works with a sample video on my computer but not the video from my camera.  PLEASE HELP!  Thank you

    One more thing---I'm working with PC: Windows 7 and only the PSE, not the premier version. 

  • When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up?

    When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up? I cannot find it. Stan

    It will be right next to the movie in your library and the jpg file will end up on your hard disk right next to the movie file. You can see the actual file by right (or control) clicking on the image in the library view and selecting "show in Finder/Explorer"

Maybe you are looking for

  • How to view photos in icloud drive from iphone or ipad devices

    I upgraded to icloud drive and I added some photos there (not via the photos app), How do I access them from my iphone or ipad. Which app is compatible with icloud drive to view and share my photos?

  • Customer , vendor 0000049256 not known (EDI process)

    We are trying to send an IDoc type INVOIC from one SAP R/3 system to another using the SAP XI/PI. Right now we are experience an error “Customer , vendor 0000049256 not known”, after have check all ALE/EDI configuration between the source system (SAP

  • I need a software developer for a plugin for Photoshop

    Basically we need a plugin or macro, etc that will take a graphics module that will affect the rgb separations. Once this is done will merge them into one file and print a negative. Our company is based in San Diego, California. Dan Lieberman Email:

  • Am I able to re-sync my contacts onto iMessage?

    I was messing around on my iMessage settings on my macbook, and somehow un-synced all of my contacts. It is now only bringing up numbers, instead of their names. My contact book still has all of my contacts in it, but I don't know how to get it to re

  • Problems with Monitor

    Have just brought a new computer running windows 8.1 but kept my original Monitor which is HPw1907 originall brought in 1907.Some game will not run on the full screen, either the mouse pointer is very unsteady or the screen just goes white. Sats the