Exporting SWF length problem

I'm using after effects cs6 and I need so bad to export an swf file ,whenever I export it I get a different length which is about 3 seconds while the original comp is 10 seconds. Help please

You are not giving us much to go on. Try checking your work area VS the comp length. Try checking the frame rates. I don't know anything about your project at all so these suggestions might not do any good.

Similar Messages

How to set a loop on an .flv so that an exported .swf loops?

hi there. i am using Flash CS4 and I would like to know how to set a loop in an flv file so that when it is exported to swf, the movie will loop. Basically i have taken an existing interactive flash movie and have decompiled it into its individual flv counterparts. what i intend to do is take out all the nonsense from each flv file and then reconstruct the flash movie, export each file to swf and then convert each swf to avi or some other video format. to do this i will be using sothink swf to avi converter which allows you to convert swf files to avi files. this program allows you to convert swf files that loop by looping the swf file for as long as you want until you stop it, in which a video file is created from "the recording"
after i decompiled the original file, many of the existing flv files were already set to loop. i know this because when exported to swf the swf file would loop. now when i went ahead and went into each flv file to edit a couple things, when i went to export them to swf, the swf files wouldn't loop. mind you, some of them did loop, and some of them did not loop. the ones i have edited are all supposed to loop and i cannot figure out what it is thats preventing some of the flv or exported swf files to loop. all i did was take out a few unnecessary frames from the beginning of each flv and nothing more. i am pretty new to Flash and do not know anything about coding and know very little about flash settings.
i figured that selecting the "loop playback" option in the control drop down menu might help seeing as the flv file does loop when played in the editor, but again when exported to swf the swf file does not loop. what confuses me the most is that some of the exported swf files do loop. ALL of the exported swf files need to loop and my guess is that in order to make that happen, something in the flv file needs to be set correctly.
can someone please assist me with this issue? if there is a way to simply loop an existing swf file that does not loop, can someone tell me how to do that? any help with this problem is greatly appreciated and i appologize if something like this has been asked before.... i just couldnt stand looking through 22 pages of search results to find the exact solution to my problem
thank you!!!

Hi,
You can use shortDesc property. Something like
<af:commandToolbarButton text="Some Button"
id="ctb1" shortDesc="This button does something.."/>-Arun

Why does my exported swf show more content than actually on frame?

Why does my exported .swf show more content than actually on frame?
My problem is relatively simple, though, I had some trouble finding a solution to it:
When I play my exported animation using flash player in Google Chrome, if the window is bigger than the resolution flash document/frame, it shows content not meant to show up on the frame -- like parts of a huge background that aren't supposed to show up yet.
In other words, how do I constraint the .swf to the white background/document resolution?

Anyone? I'd appreciate it if someone replied soon -- I am done with my project once this issue is resolved, and I am excited to publish it.
Please respond if you have any useful knowledge on the matter!
Thanks!

Exported swf formatting differs from preview mode

When I view a model in preview mode, everything looks fine with the formatting. However, after exporting the file (or viewing the export preview), some of the formatting is incorrect - such as axes labels and titles being truncated or moved from their original position, as well as grid sizes changing so that what I have aligned no longer is aligned.
I can make formatting adjustments in the model so that it appears more properly in the exported swf file, basically correcting for these differences. However, this is obviously not ideal, and I have not been able to identify any patterns in these discrepancies (sometimes it looks fine, other time not). I appreciate any suggestions!

Hi,
I am facing the same issue too. The whole formatting goes off once exported to ppt. The fonts reduce to such an extent that I cannot see the fonts. If I drag the swf component to full screen in ppt, the labels, come over the axes.
Please let me know how to correct it.

How to export swf file in different versions of flash like (6,7,8,9) ?

Hi,
    System Specification :
    -XP with SP3
    -MS Office 2003
    -Flash V.10
    -Xcelsius Engage 2008 ( 5.3.0.0 )
    -Xcelsius Build number 12,3,0,670
   When I export output in swf format then xcelsius generating swf file of version 9. I want to export swf file in different versions of flash like (6,7,8,9) . I tried to install older versions of flash to do this but I am not able to open xcelsius in older version. I am getting error saying 'Install latest flash player'.
Is there any way to export swf files in different versions?
Is this build is compatible with only flash 10?
Thanks,
Ganesh

Xcelsius only support Flash version from 9 on. There is no way to export to 6,7 or 8.

Exporting to pdf problem

Post Author: achaithanya
CA Forum: Exporting
Hi
I am new to crystal reports.we are converting actuate reports to CR XI.While converting we are facing lot of formatting issues.
Normally we get pdf from actuate and we need to create report pdf from CR XI.
The problem is pdf which created from CR XI is not exactly matching with Actuate pdf though in designing side everything is perfect
It would be great if you can give me a exact solution for this or do we have any alternate solution for this problem
I strucked up with this problem
Thanks in advance
Regards,
Chaithu

Post Author: synapsevampire
CA Forum: Exporting
Does "The problem is pdf which created from CR XI is not exactly matching with Actuate pdf though in designing side everything is perfect " mean that when you export to PDF from the CR designer it looks right?
And then from some other, unexplained process it does not?
Try describing more fully your environment and when the problem exists.
There's already a language barrier, not supplying technical information makes it even more tricky.
-k

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?
I know I can use AS code,likes "[Embed]" metadata to embed binary in swf. But , how can I do that in Flash CS5 ?

Have a look at this: http://stackoverflow.com/questions/7816231/how-to-use-as3-to-load-binary-data-from-web-ser ver

CSV Export - Foreign Character Problem

Hi,
We have created a report which queries records from various countries. The problem we are having is with foreign characters (eg: Ã¼, Ã, Ã, Ã¤ etc). These characters are being displayed correctly in the browser however when we export to Excel (CSV) file they get turned into something like (Â¼, Â¤, Â¶, Æ).
Could someone please explain why this might be happening and if possible suggest a fix or workaround?
Many thanks,
Richard.

Hi,
I've been looking into this problem a bit further and it appears that all of the foreign characters are being correctly written to the .CSV file during the export. The problem is when Excel tries to open the .CSV file. I'm guessing that my characters don't fall into the .CSV's UTF-8 format, therefore Excel swaps them with other characters.
If you're interested here is my work around to this problem:
1) Open the .CSV file in Notepad
2) Select All then Copy
3) Paste into blank Excel document
4) Highlight Column A and select Data -> Text to Columns
5) Select Delimited then make sure only Comma is ticked
6) Click Finish
-- My original characters are now intact.
7) Finally save as .XLS
Regards,
Richard.

Export SWF from AE CS6

I used to be able to export SWF files directly from AE CS3. But am having difficulty performing that same task in CS6. Under FILE/EXPORT there is an option to choose "Adobe Flash Player (SWF)". However, when I output the file it appears to start rendering, then almost immediately the render window dissapears. I don't receive any kind of error message at all. It simply creates an SWF file with no content in it. Does anyone have an idea what the issue might be?

I have the emails from Adobe in regards to this bug. Here is the email I received:
Hello Don,
This is in regards to the issue that you are facing in exporting the .swf files from After effects CS6.
It is a bug and Development team is working on this issue.
The bug number is 3345048.
We will release the fix for this in the next update.
I am closing this case as of now.
If have any queries , please feel free to get back to us on 1-800-833-6687
I then receive this email within hours of receiving above noted email:
Adobe Case Update and Feedback Opportunity
Your Adobe ID: Fyredept
Your Case Number:XXXXXXXXXXX
With this response, we believe your issue is resolved and have therefore closed your case XXXXXXXXXX. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed.
Your feedback is important to us. Please take a moment to let us know how we're performing against your expectations by completing our survey.
Take the survey
To review your case history or reopen the case, log in to the Adobe Support Portal online and look for your case number in the "recent activity" section. If you have difficulties logging in, consult the Adobe ID and Membership FAQ.
Thank you,
Adobe Customer Care
To date nothing from Adobe either in the form of a fix or time frame for that fix. Looks like I will need to call again and push the issue a little. Not to much though as to tick them off and not get a fix. I will continue to keep on this with you.

Is there an replacement to exporting .swf in After Effects CC?

Is there an replacement to exporting .swf in After Effects CC? I created an animation I am using for a app prototype in InDesign. It worked great last year, on another project, but now all I see are Quicktime and other video formats which isn't really the same thing. I need a file that will work with InDesign that can export into HTML. I could make an interactive PDF which will play quicktime but thats not as cool. Any alternatives? Anyway to get After Effects into HTML, short of using Edge instead?

I think I answered my own question. H.264 Video via Media Encoder. Any other comments on best practices welcome.

Priemere Pro consistantly crashed upon export, I cleaned media cache and that seemed to help. Now export errors unknown problem... read to uninstall and reinstall and now I can not open up PPCS5

Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems.

Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems.

What Frame Rate does Catalyst export .SWF at?

What Frame Rate does Catalyst export .SWF at?
When I import a SWF file from Catalyst into another flash program, won't display never mind play, the error I get is that the frame rates don't match,
therefore I need to know what frame rate it exports at?

If you have a SWF created by Catalyst, and you're using that SWF in something you're creating with Flash Builder or Flash Pro, then I think frame rate shouldn't matter. But maybe if you can give more details I could help more... Which flash program are you importing the SWF into, what commands or code are you using to do the import? Is there an error message or alert, if so what does it say? Any info you can provide will be helpful.
Thanks

How to click button in exported SWF to go to frame in parent SWF?

I looked online, but couldn't find anything helpful.   I got these codes on the web, but they're not working.... (I'm pretty new to flash).
projectgallery.swf - PARENT SWF
projectgallery_cutLimestone.swf - EXPORT SWF
returnToAlbums_btn_inst - instance of a button on the export swf that I want to be able to click to go to a different frame in the parent SWF
Here are my codes:
on the parent SWF:
import flash.display.MovieClip;
import flash.events.MouseEvent;
var myLoader:Loader = new Loader();
var url:URLRequest = new URLRequest("projectgallery_cutlimestone.swf");
myLoader.load(url);
function loadHandler (event:Event) {
          var projectgallery_cutlimestone:MovieClip = event.target.content;
          addChild(myLoader);
          trace(projectgallery_cutlimestone);
          function returnToAlbums (event:MouseEvent):void {
                    projectgallery_cutlimestone.returnToAlbums_btn_inst.play();
          projectgallery_cutlimestone.addEventListener(MouseEvent.CLICK, returnToAlbums);
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,loadHandler);
When I try it, the SWF loads fine, but when it loads, this OUTPUT error appears:
[object Main]
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/frame2()
          at flash.display::MovieClip/gotoAndStop()
          at Main/preload1()
then, when I try to click the button returnToAlbums_btn_inst, this OUTPUT error appears:
ReferenceError: Error #1069: Property play not found on flash.display.SimpleButton and there is no default value.
          at Function/<anonymous>()
I'm really new to flash, so I don't know why it's not working. The instance is labeled (I double-checked).

Export SWF works without error now, but parent SWF returns:
TypeError: Error #2007: Parameter child must be non-null.
          at flash.display::DisplayObjectContainer/addChild()
          at Main/frame3()
          at flash.display::MovieClip/gotoAndStop()
          at Main/gotoCutLimestone()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at Main/preload1()
under OUTPUT when I try to load the SWF. The returnToAlbums_btn_inst doesn't work still either.

Adding a SWC to a exported swf via a CS Extension

Hi,
I'm building a extension for Flash, and I'd like to be able add a swc file to a exported swf, that is generated through my Extension. I know that in the Flash JS extension language you can export a swf using:
fl.getDocumentDOM().exportSWF("", true);
As part of the export process can I add a SWC file, that contains code my CS extension needs to inject into the generated swf file. I did think that I could use:
document.externalLibraryPath
To point to a SWC file that is added to the published swf.
What I want to do is add meta data to the Flash file that can be accessed externally at runtime, so I mark areas of the SWF that are updated dynamically at runtime.
Are these ideas possible?
Thanks
Stephen

That's not a possibility in this beta, however you might find this plug-in useful: http://www.photographers-toolbox.com/products/lrmogrify2.php It'll allow you to set the size in pixels using the export dialog and add borders of your choice.

Exported SWFs have reduced detail

Hi there,
We are having an issue with Flash Pro CC - one of several now - in that when we export out our SWFs for compositing, they do not have the same quality - so smoothlines are replaced by jagged lines, beautiflu curves are replaced by hard edges.
When we export to PNGs or JPEGS everything is fine, but in our pipeline we need to use SWFs.
Does anyone have the same issue and if so do they have a fix for these exported SWFs?
Thank you

I mentioned that we do this already in After Effects.
The issue is not with AE, it's with the SWFs themselves when they run in Flash Player at full quality.
The smoothed fills look jagged.
I want to know if there is some kind of quality filter in Flash for exporting out the SWFs as at the moment it appears to be broken - I am assuming this is due to the constant inundation of X.x.x releases of CC rather than a solid point release with less bugs and more fixes.
G

Exporting SWF length problem

Similar Messages

Maybe you are looking for