Exporting technical/business systems from one SLD to another

Hi Experts,
Currently we have dev/qa SLD and production SLD.  I currently have access to create/modify technical and business systems in dev/qa SLD but when I try to export these technical/business systems the link to export is disabled.  Is there a different security role that I need in order to be able to export the techincal and business systems that have been created in the dev/qa SLD?  I need to export these systems and import them into the production SLD.
Are there any impacts/differences between exporting/importing and creating the systems manually?  For example if I cannot export the systems would it be ok if I created them again in the production SLD?
Thank you

YOu need the authorization for login in SLD as admin
Follow this link for compete details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
No differeence...it's just increase the work you have to do in SLD...but the important thing here is when you move the tranports of the SLD BS from DEV to Production you have to maintin the same name as you have maintained in the trnsport targets in the DEV......your ID tranport to Production is dependedn on what is the BS name you are mentinog of production in the transports targets.

Similar Messages

  • SAP XI 3.0 - Error while reading the ID of own business system from the SLD

    Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100. 
    I get this error in the SXMN_MONI.  The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
    I could able to get "SUCCESSFULLY PROCESSED" in development and production.  But only in Quality I getting this error.  Could anyone help me to fix this issue.
    thanks...

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • Error while reading the ID of own business system from the SLD for system

    Hello,
    I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>ZTA</SAP:P1>
      <SAP:P2>013</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anybody help me?

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • Error while reading ID of own business system from the SLD

    HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>DSM</SAP:P1>
      <SAP:P2>900</SAP:P2>
      <SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
    I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
    Regards,
    Anand

    Hi Anand,
      check the two thing's in XI.
    1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
    2. Create the business system based on above technical system and select the role of business system is Integration server.
      URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
    3. Create the technical system based on your SAP R/3 system.
    4. Create the business system based on your SAP R/3 system.
    here you need to select role of business system : Application system.
      related integration server is : <XI System SID has to come>
    and try to refresh the initical cache once ...
    http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
    after all the things post what is the problem you are faceing.
    Regards,
    Venu.

  • Error when reading the ID of the business system from the SLD

    Hi,
    I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
    The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
    What could have gone wrong. Thanks in advance.
    Srini

    Hi,
    :::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
    1) SAP_XI_Developer_ABAP +
    2) SAP_XI_Developer_J2EE  +
    3) SAP_XI_MONITOR_ABAP   +
    4) SAP_XI_MONITOR_J2EE    +
    5) SAP_SLD_ADMINISTRATOR +
    6) SAP_XI_BPE_MONITOR_ABAP +
    7) SAP_XI_DEMOAPP
    8) SAP_XI_DISPLAY_USER_ABAP +
    9) SAP_XI_DISPLAY_USER_J2EE +
    Regards
    Sesh

  • Error while reading ID of own business system from the SLD for system D18

    Dear guru's,
    I have almost completed a file2proxy scenario but I'm stuk on the following.
    When sending a message the outbound adapter says:
    <b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
    What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
    Any suggestions?
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>D18</SAP:P1>
      <SAP:P2>200</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
    Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
    here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
    Hope you problem is fixed

  • Error while reading ID of own business system from the SLD for system DPI

    Hi All,
    My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
    In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
    Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
    Please help me out.
    Thanks
    Kiruthi
    Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

    Hi,
    Check transaction SLDAPICUST for correct SLD configuration.
    http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
    ~Sanv...

  • SLD Error in IE:Error while reading ID of own business system from the SLD

    Dear Champs,
    Scenario : JDBC to Proxy(APO system)
    We are getting below error in MONI UAT Box. All other interface are working fine but we are facing issue for a particular Bussiness System also logical system are maintained properly.the same interface is working fine in other UAT box.
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>R/3 Sys ID</SAP:P1>
      <SAP:P2>"Client"</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading ID of own business system from the SLD for system "R/3 Sys ID"and client "Clnt no"</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
    Regards,
    Manikandan

    Hi Mani,
    Solution 1:
    Check if the techncal system has associated Business system. I think there is something wrong in your SLD configuration and try to correct it.
    Solution 2:
    Create a Business system in the ID, and create the communication channel do the respective changes in ID ( I.e Receiver agreement, Receiver determination & Interface).

  • How to EXPORT a concurrent program from one instance to another

    Hi,
    I am new to EBS.
    How to EXPORT a concurrent program from one instance to another. I dont want to use FNDLOAD.
    Is there any other way from where we can export the concurrent program to anothere instance from CLIENT connection server.
    Thanks
    Asis

    Hi;
    What is EBS version? Why you dont use FNDLOAD?
    Pelase see below thread
    Move concurrent program to prod
    Move concurrent program to prod
    Regard
    Helios

  • Error while reading ID of own business system from the SLD for system

    Dear all,
    We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
    - SLDCHECK reports no errors
    - SLAPICUST: pointing to the SLD
    - SXI_CACHE with full refresh: no result.
    Does anyone have a clue for me?
    Kind regards,
    John.

    I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
    1. First try to clear full SLD cache and then test.
    2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

  • Migrating from one SLD to another

    Hello,
    We are trying to migrate from an SLD on 6.40 to an SLD on 7.0. The SLD 6.40 will remain until all systems are on the 7.0 box.  Can we do an export/import of the Technical and Business Landscapes, or doe we have to re-register each system using RZ70 on the new SLD? 
    thanks,
    Eric

    Hello,
    It's better to use export / Import to get the same UID define on XI System.
    And then you can re-register all your systems to this new SLD.
    Best regards,
    Chris

  • Can I copy my Lion operating system from one computer to another in the household

    Can I copy my Lion operating system from my Mac Air to another household computer?

    It should also be noted that you can upgrade all Apple computers in your home free IF you paid for one license.
    It should also be noted that you are NOT supposed to sell a computer that contains an UPGRADED copy of Lion.

  • [Help] Move ECC system from one server to another - Considerations

    Hi Guys
    We currently have two SAP ECC 5.0 Instances over DB2 9.7/AIX 6.1 on a same server (WS01), and now we are splitting this, by leaving Development box on WS01 and moving QA to WS08
    What would you think/recommend the best approach to fulfill this requirement
    Im taking in mind such things like, transport system, RFC connections, Database and SAP Profiles
    What steps would you think are mandatory to have QA system fully working on a brand new server
    Is an option to install an system from scratch on that new server (WS08), and they restore the actual database and perform the post processing steps just like a refresh, and then adding that system to the actual ECC landscape
    Best Regards
    Martin

    > We currently have two SAP ECC 5.0 Instances over DB2 9.7/AIX 6.1 on a same server (WS01), and now we are splitting this, by leaving Development box on WS01 and moving QA to WS08
    >
    > What would you think/recommend the best approach to fulfill this requirement
    >
    > Im taking in mind such things like, transport system, RFC connections, Database and SAP Profiles
    >
    > What steps would you think are mandatory to have QA system fully working on a brand new server
    This process is called "system copy".
    > Is an option to install an system from scratch on that new server (WS08), and they restore the actual database and perform the post processing steps just like a refresh, and then adding that system to the actual ECC landscape
    It's an option but not necessary to first install a full featured system and then "overwrite" the database.
    You can install a new system using the database backup of the original system.
    http://service.sap.com/instguides
    Markus

  • Export build file made from one computer to another

    Hi,
    From one computer, at work, I do a build file for my installer, and when I use it at home it doesn't work. Some source file are incorrect according to LV and I have to add all the source files to my installer again. It's is a tedious work!!!!! LV doesn't say which file generates the error and then I have to delete all the source files and one by one I have to add them to the source file list. How can I add multiple source files at once? or how can I know which file is the one that generates the error when I load my build file?
    Thanks,
    ToNi.

    Hi,
    If all files in the build script are at the same location, it should work the same on both PC's.
    Some ways to aceive this:
    Map directories as logical drives. E.g. you can map any directory as a w: drive, and you can have your application on w: on both computers.
    Use a hierarchial file structure. If all sub vi's are in subdirectories of the root directory, and the main is in the root, LabVIEW should be able to locate the sub vi's (and other files).
    Hope it help...
    Regards,
    Wiebe.
    "tonitpp" <[email protected]> wrote in message news:[email protected]..
    Hi, From one computer, at work, I do a build file for my installer, and when I use it at home it doesn't work. Some source file are incorrect according to LV and I have to add all the source files to my installer again. It's is a tedious work!!!!! LV doesn't say which file generates the error and then I have to delete all the source files and one by one I have to add them to the source file list. How can I add multiple source files at once? or how can I know which file is the one that generates the error when I load my build file?Thanks,ToNi.

  • How to move Software componet and product from One SLD to another

    Hi Experts,
    I want to move the software component that i created in the development SLD and the product from dev system to Prod system SLD. Our development and the quality share the same SLD so i didnt have to do anything. How do i export the software component and the Product form dev SLd to Prod SLD Or what steps do we need to follow to move the Software component from SLD -> SLD.
    I am new to PI and this is the 1st time in am doing this activity. Request you help.
    BR Heth.

    Hi,
    Please ensure to read note #[1540435 |http://service.sap.com/sap/support/notes/1540435]and to decide which update strategy/scenario you
    need and in the "[SLD Planning Guide|http://www.sdn.sap.com/irj/sdn/nw-sld?rid=/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]".
    You should ensure that your CIM Model and CR Content on your SLD are updated as
    per SAP note [669669 |http://service.sap.com/sap/support/notes/669669]on both SLDs.
    Regards,
    Aidan

Maybe you are looking for